Power Transducer Series L-UNIT

MULTI POWER TRANSDUCER MODEL LSMT2

MODEL & SUFFIX CODE SELECTION
120 (4.72)

LSMT2–❑❑❑❑❑❑–❑
MODEL
CONFIGURATION 100
1 : 3-phase / 3-wire (See P. 5/10) (3.94)

2 : Single-phase / 2-wire (See P. 7/10)

3 : Single-phase / 3-wire (See P. 8/10) 128
4 : 3-phase / 4-wire (See P. 9/10) (5.04)
mm (inch)
VOLTAGE INPUT
0 : None Functions & Features
1 : 110V AC • Converting all major factors required for power
2 : 220V AC management into DC outputs • Compact design •
4 : 380V AC 10 analog outputs and 1 Wh pulse output or Modbus
A : 100V / 200V AC output • Saving wiring space • DIN rail mounting
CURRENT INPUT • Free selection of measuring items, assigned to any
0 : None output channel • Transducer input range is
1 : 1A AC selectable with Watt, Var, Power Factor or Fre-
5 : 5A AC quency • Linear output for bidirectional current for
ZERO-PHASE VOLTAGE INPUT Var and Power Factor • Output characteristics can
0 : None be changed according to Lag/Lead for Var and Power
1 : 110V AC Factor
2 : 190V AC Typical Applications
DC OUTPUT • Monitoring panels
Current Voltage
A : 4 – 20mA DC 4 : 0 – 10V DC GENERAL SPECIFICATIONS
G : 0 – 1mA DC 5 : 0 – 5V DC
Construction: stand-alone; terminal access at the front
6 : 1 – 5V DC
Connection
PULSE / NETWORK OUTPUT
Input and aux. supply: M4 screw terminals
0 : None (with zero-phase voltage input selected)
Output: M3.5 screw terminals
1 : Watthours
Screw terminals: nickel-plated brass (torque 0.8 N·m)
M : Modbus
Housing material: flame-resistant resin (black)
AUXILIARY POWER SUPPLY
Isolation: voltage input to current input to DC out-
AC Power DC Power
put or pulse (network) output to aux. sup-
M : 85 – 264V AC R : 24V DC
ply; negatives common to all outputs
V : 48V DC
Computation: digital processor
P : 110V DC
Output range: approx. 0 – 100% at 1 – 5V
ORDERING INFORMATION Zero/span adjustments: ±4% independently adjust-
See later pages of this data sheet for detailed infor- able for each measuring item
mation about availability of the functions for each in- Address setting: 0 – 249 selectable (front; default
put configuration. 001)
The unit is configured at the factory according to the Overrange output limit: high 101%, low -1%
user's specifications, however, measuring items can be (resettable)
freely selected and assigned to up to 10 output chan- Sampling rate: approx. 500 µsec.
nels via the front panel control switches, except V0 : (DO NOT connect directly to inverters.)
zero-phase voltage or MV0 : max. zero-phase voltage
which require specific hardware to be ordered.
The measuring items are listed below:
A = Line current V = Line voltage
W = Watt, active power var = var, reactive power
PF = Power factor Hz = Frequency
V0 = Zero-phase voltage
MV0 = Maximum zero-phase voltage
P. 1 / 10 ES-1954 Rev.6
 LSMT2
MODBUS COMMUNICATION •Watt
OUT mA OUT V
Standard: Conforms to RS-485, EIA 20 10

Baud rate: 1200, 2400, 4800, 9600, 19.2k bps

12
selectable (front) 5
Communication: Half-duplex, asynchronous, no
4
procedure INP INP
0
Protocol: Modbus RTU 0
-1000
500
0
1000W
+1000W
0
-1000
500
0
1000W
+1000W
Transmission distance: 500 meters max.
Transmission media: shielded twisted-pair cable •Var
OUT mA OUT V
(CPEV-S 0.9 dia.) 20 10

Refer to the Modbus Protocol Reference Guide (EM-

12
5650) for supported functions. 5

4
INPUT & OUTPUT 1000 0
INP
1000var
0
1000 0
INP
1000var
■INPUT (LEAD) (LAG) (LEAD) (LAG)

•Voltage Input (must be balanced for 3-phase) •Var for Bidirectional Current
Operational range OUT mA
20
OUT V
10
Voltage & active/reactive power: 0 – 110% of rating
12
Power factor & frequency: 90 – 110% of rating 5

Overload capacity: 200% of rating for 10 sec., 4

INP INP
0
1000 0 1000 0 1000var 1000 0 1000 0 1000var
120% continuous (LEAD) (LAG) (LEAD) (LAG) (LEAD) (LAG) (LEAD) (LAG)
REVERSE FLOW DIRECT FLOW REVERSE FLOW DIRECT FLOW
Input burden: ≤0.2VA/phase for 110V AC
≤0.3VA/phase for 220V AC •Power Factor
OUT mA OUT V
≤0.5VA/phase for 380V AC 20 10

12
•Current Input (can be unbalanced for 3-phase) 5
Operational range
4
Current & active/reactive power: 0 – 120% of rating INP INP
0
Power factor: 20 – 120% of rating 0.5
(LEAD)
1 0.5
(LAG)
0.5
(LEAD)
1 0.5
(LAG)
Overload capacity: 4000% of rating for 1 sec., 2000% When the input voltage is zero or the current is the twentieth or less of
for 4 sec., 120% continuous the rating, the output is either equivalent to power factor 1 or
0% or less (selectable).
Input burden: ≤0.3VA/phase
•Power Factor for Bidirectional Current
OUT mA OUT V
20 10
■OUTPUT
•DC Current 12
5

Load resistance 4
INP 0 INP
4 – 20mA : 600 (Ω maximum) 0 1 0 1 0 0 1 0 1 0
(LEAD) (LAG) (LEAD) (LAG) (LEAD) (LAG) (LEAD) (LAG)
0 – 1mA : 10k REVERSE FLOW DIRECT FLOW REVERSE FLOW DIRECT FLOW
OUT mA OUT V
20 10

•DC Voltage 12
5
Load resistance
4
0 – 10V : 1000 (Ω minimum) INP 0 INP
0 0.5 1 0.5 0 0.5 1 0.5 0 0 0.5 1 0.5 0 0.5 1 0.5 0
0 – 5V : 1000 (LEAD) (LAG) (LEAD) (LAG)
REVERSE FLOW DIRECT FLOW
(LEAD) (LAG) (LEAD) (LAG)
REVERSE FLOW DIRECT FLOW
1 – 5V : 1000 When the input voltage is zero or the current is the twentieth or less of
the rating, the output is either equivalent to power factor 1 or
0% or less (selectable).
■I/O CHARACTERISTICS •Frequency
•Voltage •Current OUT mA OUT V
OUT mA OUT V 20 10
20 10

12
12 5
5
4
4 INP INP
0
INP 0 INP 45 55 65Hz 45 55 65Hz
0 150 300V 0 2.5 5A
When the input voltage is the fifth or less of the rating, the output
is equivalent to the input frequency – 2Hz.

Specifications subject to change without notice.

P. 2 / 10 ES-1954 Rev.6
 FRONT PANEL CONFIGURATION •Assigning Output Channels
SW1 : ON (Set mode)
SELECT Rotary SW
SW6 : ON (Assign mode)
DATA Display Rotary SW : Choose the output channel.
Control buttons : Watching the DATA display show-
FUNCTION SW
ing measuring item No., press (+) or (–) for changing
1 2 3 4 5 6 7 8 9 10
data.

11 12 13
INSTALLATION

1
2
3
4
5
6
O
F
F
Auxiliary power supply
AC: operational voltage range: 85 – 264V,
14 16 18 20 22 24 26 28 30 32 A C 50/60 Hz, approx. 10VA
15 17 19 21 23 25 27 29 31 33 B DC: operational voltage range: rating ±10%, or
85 – 150V for 110V rating; ripple 10% p-p
Terminator
max.; approx. 10W (90mA at 110V)
Control Buttons Operating temperature: -10 to +55°C (14 to 131°F)
Operating humidity: 40 to 85% RH (non-condensing)
DATA display: green LED; 5 mm (.2 in) Mounting: surface or DIN rail
FUNCTION SW: Used to turn the unit into SET Dimensions: W125×H100×D128 mm (4.72"×3.94"×5.04")
mode and choose functions. Weight: 600 g (1.3 lbs)

SELECT rotary SW: Used to choose output channels,

programmable items, etc. in Set mode. PERFORMANCE in percentage of span
Accuracy
Control buttons: Used to increase (+) / decrease (–)
Voltage, current, watt, var, frequency: ±0.5%
the values, or move forward (+) / back (–) to other
Power factor: ±1.5%
items in Set mode.
Zero-phase voltage: ±1.0%
Continuously pressing the button increases incre-
Max. zero-phase voltage: ±1.0%
mental speed.
Watthours: ±2.0% (load current 5 – 100%, power factor 1.0)
OFF ON ±2.5% (load current 10 – 100%, power
SW1 Run mode Set mode factor 0.5, lag current)
SW2 Output Adj. mode Configure mode Temp. conditioning incl. in the accuray: 23 ±10°C
SW3 Zero adj. Span adj.
(73.4 ±18°F)
SW4 Measured value output Simulated rated value output
Freq. conditioning incl. in the accuracy: rating ±5%
SW5 — —
Response time (0 – 100% ±1%): ≤1 sec.
SW6 Run mode Assign mode
except for zero-phase voltage: ≤0.1 sec.
Terminator: For Modbus communication. Ripple: 1% p-p max.
Auxiliary supply voltage effect: half the accuracy
■PROGRAMMING PROCEDURE (example) over voltage range
•Zero/Span Adjustments Power failure protection: VT/CT ratios, watthours,
SW1 : ON (Set mode) max. zero-phase voltage are stored in the
SW2 : OFF (Output Adj. mode) non-volatile memory.
SW3 : OFF (zero) or ON (span) Insulation resistance: ≥50MΩ with 500V DC
Rotary SW : Choose the output channel. (voltage input to current input to DC
Control buttons : Watching the DATA display show- output to pulse (network) output to aux.
ing adjusted value, press (+) for increasing or (–) for supply to ground)
descreasing the value. Adjustable to ±5%. Dielectric strength: 2000V AC @1 minute
(circuit to ground; voltage input termi-
•Configuration Change (range, lag/lead, etc.) nals to output terminals; aux. supply to
SW1 : ON (Set mode) input or output terminals)
SW2 : ON (Configure mode) 1500V AC @1 minute
Rotary SW : Choose the item to be programmed. (output terminals to ground)
Control buttons : Watching the DATA display show- Surge withstand voltage: 1.2/50 µsec., ±6kV
ing data No., press (+) or (–) for changing data. (circuit to ground; voltage input termi-
nals to output terminals)

P. 3 / 10 ES-1954 Rev.6
 LSMT2
CONNECTION DIAGRAM, OUTPUT & AUXILIARY SUPPLY
AUX SUPPLY

11 12 13
E U(+) V(–)

14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 A B C
+ – + – + – + – + – + – + – + – + – + – + – ■Pulse Output
1 2 3 4 5 6 7 8 9 10 11
OUTPUT + – ■Network Output
Output 1 through 10: Analog output
Output 11: Pulse or network output Shielded
Twisted-pair
Cable

To Other
RS-485 Devices

EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENT mm (inch)

9.2 (.36) 13–M4 SCREW
4–5 (.2) dia. HOLE

DIN RAIL
1 2 3 4 5 6 7 8 9 10 35 mm wide

11 12 13

35.4 (1.39)
100 (3.94)
90 (3.54)
72 (2.83)

14 16 18 20 22 24 26 28 30 32 A C

15 17 19 21 23 25 27 29 31 33 B

23–M3.5 SCREW
64 (2.52) 7 (.28)
8.2 (.32)
120 (4.72) 128 (5.04) [3.3 (.13)]

MOUNTING REQUIREMENTS mm (inch)

64 (2.52) 4–M4
90 (3.54)

125 (4.92) min.

Specifications subject to change without notice.

P. 4 / 10 ES-1954 Rev.6
 3-PHASE / 3-WIRE CONNECTION MODEL LSMT2-1
MODEL & SUFFIX CODE SELECTION INPUT RANGE
•Voltage •Current
LSMT2–1❑❑❑❑❑–❑
RATING RANGE RATING RANGE
MODEL
110V 0 – 150V 1A 0 – 1A
CONFIGURATION
220V 0 – 300V 5A 0 – 5A
1 : 3-phase / 3-wire
VOLTAGE INPUT •Active power
0 : None Input range and ± can be changed via the front panel.
1 : 110V AC RATING RANGE
2 : 220V AC 0 – 100W -100 – +100W
CURRENT INPUT *1 0 – 150W -150 – +150W
110V / 1A
0 : None 0 – 166.6W -166.6 – +166.6W
1 : 1A AC 0 – 200W -200 – +200W
5 : 5A AC 0 – 500W -500 – +500W
*1 : Alternative choice of V0 or current. 0 – 750W -750 – +750W
110V / 5A
ZERO-PHASE VOLTAGE INPUT (V0) *1 0 – 833W -833 – +833W
0 : None 0 – 1000W -1000 – +1000W
1 : 110V AC 0 – 200W -200 – +200W
2 : 190V AC 0 – 300W -200 – +200W
220V / 1A
DC OUTPUT 0 – 333.3W -333.3 – +333.3W
Current Voltage 0 – 400W -400 – +400W
0 – 1000W -1000 – +1000W
A : 4 – 20mA DC 4 : 0 – 10V DC
0 – 1500W -1500 – +1500W
G : 0 – 1mA DC 5 : 0 – 5V DC 220V / 5A
0 – 1666W -1666 – +1666W
6 : 1 – 5V DC
0 – 2000W -2000 – +2000W
PULSE / NETWORK OUTPUT
0 : None (with zero-phase voltage input selected) •Reactive power
1 : Watthours Input range and lag/lead can be changed via the front panel.
M : Modbus RATING RANGE
AUXILIARY POWER SUPPLY 0 – lag 100 var lead 100 – lag 100 var
AC Power DC Power 0 – lag 150 var lead 150 – lag 150 var
110V / 1A
M : 85 – 264V AC R : 24V DC 0 – lag 166.6 var lead 166.6 – lag 166.6 var
V : 48V DC 0 – lag 200 var lead 200 – lag 200 var
P : 110V DC 0 – lag 500 var lead 500 – lag 500 var
0 – lag 750 var lead 750 – lag 750 var
110V / 5A
ORDERING INFORMATION 0 – lag 833 var lead 833 – lag 833 var
0 – lag 1000 var lead 1000 – lag 1000 var
Specify code number and variables (e.g. LSMT2-
0 – lag 200 var lead 200 – lag 200 var
1150A1-M). Use Ordering Information Sheet (No.
0 – lag 300 var lead 200 – lag 200 var
ESU-1954-1). 220V / 1A
0 – lag 333.3 var lead 333.3 – lag 333.3 var
The unit is configured at the factory according to the
0 – lag 400 var lead 400 – lag 400 var
user's specifications, however, measuring items can be 0 – lag 1000 var lead 1000 – lag 1000 var
freely selected and assigned to up to 10 output chan- 0 – lag 1500 var lead 1500 – lag 1500 var
nels via the front panel control switches, except that 220V / 5A
0 – lag 1666 var lead 1666 – lag 1666 var
V0 : zero-phase voltage is available only when speci- 0 – lag 2000 var lead 2000 – lag 2000 var
fied in ordering.
The measuring items are listed below: •Zero-phase voltage
A = Line current V = Line voltage RATING RANGE
W = Watt, active power var = var, reactive power 110V 0 – 150V
PF = Power factor Hz = Frequency 190V 0 – 260V
V0 = Zero-phase voltage

P. 5 / 10 ES-1954 Rev.6
 LSMT2
Power factor: lead 0.5 – 1 – lag 0.5
lag 0.5 – 1 – lead 0.5
lead 0 – 1 – lag 0
lag 0 – 1 – lead 0
Input range and lag/lead can be changed via the front panel.

Frequency: 45 – 55 Hz, 55 – 65 Hz, 45 – 65 Hz

Input range can be changed via the front panel.

Watthours
Ratio: 110V – 77kV at the VT primary
5 – 8000A at the CT primary
Pulse unit: 0.01, 0.1, 1, 10, 100, 1000 kWh/pulse

CONNECTION DIAGRAM, INPUT

•No Zero-phase Voltage Measuring

SOURCE A 1 K LOAD
1
V12 V31 A 2 k
2
V23 A3 K
3
k
V V CT CT
U U
VT
u v v u

1 2 3 4 5 6 7 8 9 10
P1 P2 P3 1S 1L 3S 3L

•With Zero-phase Voltage Measuring

SOURCE LOAD
1
V12 V31
2
V23
3
V V
U U GVT3
VT
u v v u

1 2 3 4 5 6 7 8 9 10
P1 P2 P3 G1 G4

Specifications subject to change without notice.

P. 6 / 10 ES-1954 Rev.6
 SINGLE-PHASE / 2-WIRE CONNECTION MODEL LSMT2-2
MODEL & SUFFIX CODE SELECTION INPUT RANGE
•Voltage •Current
LSMT2–2❑❑0❑❑–❑
RATING RANGE RATING RANGE
MODEL
110V 0 – 150V 1A 0 – 1A
CONFIGURATION
220V 0 – 300V 5A 0 – 5A
2 : Single-phase / 2-wire
VOLTAGE INPUT •Active power
0 : None Input range and ± can be changed via the front panel.
1 : 110V AC
RATING RANGE
2 : 220V AC 0– 50W -50 – +50W
CURRENT INPUT 0– 75W -75 – +75W
0 : None 110V / 1A
0 – 83.3W -83.3 – +83.3W
1 : 1A AC 0 – 100W -100 – +100W
5 : 5A AC 0 – 250W -250 – +250W
ZERO-PHASE VOLTAGE INPUT (V0) 0 – 375W -375 – +375W
110V / 5A
0 : None 0 – 417W -417 – +417W
DC OUTPUT 0 – 500W -500 – +500W
Current Voltage 0 – 100W -100 – +100W
A : 4 – 20mA DC 4 : 0 – 10V DC 0 – 150W -150 – +150W
220V / 1A
G : 0 – 1mA DC 5 : 0 – 5V DC 0 – 166.6W -166.6 – +166.6W
6 : 1 – 5V DC 0 – 200W -200 – +200W
PULSE / NETWORK OUTPUT 0 – 500W -500 – +500W
1 : Watthours 0 – 750W -750 – +750W
220V / 5A
M : Modbus 0 – 833W -833 – +833W
AUXILIARY POWER SUPPLY 0 – 1000W -1000 – +1000W
AC Power DC Power
M : 85 – 264V AC R : 24V DC Power factor: lead 0.5 – 1 – lag 0.5
V : 48V DC lag 0.5 – 1 – lead 0.5
P : 110V DC lead 0 – 1 – lag 0
lag 0 – 1 – lead 0
ORDERING INFORMATION Input range and lag/lead can be changed via the front panel.

Specify code number and variables (e.g. LSMT2- Frequency: 45 – 55 Hz, 55 – 65 Hz, 45 – 65 Hz
2150A1-M). Use Ordering Information Sheet (No. Input range can be changed via the front panel.
ESU-1954-2).
The unit is configured at the factory according to the Watthours
user's specifications, however, measuring items can be Ratio: 110V – 77kV at the VT primary
freely selected and assigned to up to 10 output chan- 5 – 8000A at the CT primary
nels via the front panel control switches. Pulse unit: 0.01, 0.1, 1, 10, 100, 1000 kWh/pulse
The measuring items are listed below:
A = Line current V = Line voltage
W = Watt, active power
CONNECTION DIAGRAM, INPUT
PF = Power factor Hz = Frequency
SOURCE A K LOAD
1
V k
2

U V CT
VT
u v

1 2 3 4 5 6 7 8 9 10
P1 P2 1S 1L

P. 7 / 10 ES-1954 Rev.6
 LSMT2

SINGLE-PHASE / 3-WIRE CONNECTION MODEL LSMT2-3

MODEL & SUFFIX CODE SELECTION INPUT RANGE
•Voltage •Current
LSMT2–3❑❑0❑❑–❑
RATING RANGE RATING RANGE
MODEL
100V 0 – 150V 1A 0 – 1A
CONFIGURATION
200V 0 – 300V 5A 0 – 5A
3 : Single-phase / 3-wire
VOLTAGE INPUT •Active power
0 : None Input range and ± can be changed via the front panel.
A : 100V / 200V AC
RATING RANGE
CURRENT INPUT 0 – 100W -100 – +100W
0 : None 0 – 150W -150 – +150W
1 : 1A AC 100/200V / 1A
0 – 166.6W -166.6 – +166.6W
5 : 5A AC 0 – 200W -200 – +200W
ZERO-PHASE VOLTAGE INPUT (V0) 0 – 500W -500 – +500W
0 : None 0 – 750W -750 – +750W
100/200V / 5A
DC OUTPUT 0 – 833W -833 – +833W
Current Voltage 0 – 1000W -1000 – +1000W
A : 4 – 20mA DC 4 : 0 – 10V DC
G : 0 – 1mA DC 5 : 0 – 5V DC Power factor: lead 0.5 – 1 – lag 0.5
6 : 1 – 5V DC lag 0.5 – 1 – lead 0.5
PULSE / NETWORK OUTPUT lead 0 – 1 – lag 0
1 : Watthours lag 0 – 1 – lead 0
M : Modbus Input range and lag/lead can be changed via the front panel.
AUXILIARY POWER SUPPLY
AC Power DC Power Frequency: 45 – 55 Hz, 55 – 65 Hz, 45 – 65 Hz
M : 85 – 264V AC R : 24V DC Input range can be changed via the front panel.
V : 48V DC
P : 110V DC Watthours
Ratio: 110V at the VT primary
ORDERING INFORMATION 5 – 8000A at the CT primary
Pulse unit: 0.01, 0.1, 1, 10, 100, 1000 kWh/pulse
Specify code number and variables (e.g. LSMT2-
3A50A1-M). Use Ordering Information Sheet (No.
ESU-1954-3). CONNECTION DIAGRAM, INPUT
The unit is configured at the factory according to the
SOURCE A 1 K LOAD
user's specifications, however, measuring items can be 1
k
V1N V12 A N
freely selected and assigned to up to 10 output chan- N
V2N A2 K
2
k
nels via the front panel control switches. U
V V
U CT CT
VT
The measuring items are listed below: u v v u

A = Line current V = Line voltage

1 2 3 4 5 6 7 8 9 10
W = Watt, active power
P1 P0 P2 1S 1L 2S 2L
PF = Power factor Hz = Frequency

Specifications subject to change without notice.

P. 8 / 10 ES-1954 Rev.6
 3-PHASE / 4-WIRE CONNECTION MODEL LSMT2-4
MODEL & SUFFIX CODE SELECTION INPUT RANGE
•Voltage
LSMT2–4❑❑0❑❑–❑
RATING PHASE VOLTAGE LINE VOLTAGE
MODEL
110V 0 – 150V
CONFIGURATION 0 – 150V
√3 √3
4 : 3-phase / 4-wire
220V 0 – 300V
VOLTAGE INPUT 0 – 300V
√3 √3
0 : None
380V 0 – 450V
110V 0 – 450V
1 : / 110V AC √3 √3
√3
220V •Current
2 : / 220V AC
√3 RATING RANGE
380V 1A 0 – 1A
4 : / 380V AC
√3 5A 0 – 5A
CURRENT INPUT
0 : None •Active power
1 : 1A AC Input range and ± can be changed via the front panel.
5 : 5A AC RATING RANGE
ZERO-PHASE VOLTAGE INPUT (V0) 0 – 100W -100 – +100W
0 : None 110V 0 – 150W -150 – +150W
/ 1A
DC OUTPUT √3 0 – 166.6W -166.6 – +166.6W
Current Voltage 0 – 200W -200 – +200W
A : 4 – 20mA DC 4 : 0 – 10V DC 0 – 500W -500 – +500W
G : 0 – 1mA DC 5 : 0 – 5V DC 110V 0 – 750W -750 – +750W
/ 5A
6 : 1 – 5V DC √3 0 – 833W -833 – +833W
PULSE / NETWORK OUTPUT 0 – 1000W -1000 – +1000W
0 – 200W -200 – +200W
1 : Watthours
220V 0 – 300W -200 – +200W
M : Modbus / 1A
√3 0 – 333.3W -333.3 – +333.3W
AUXILIARY POWER SUPPLY
0 – 400W -400 – +400W
AC Power DC Power
0 – 1000W -1000 – +1000W
M : 85 – 264V AC R : 24V DC
220V 0 – 1500W -1500 – +1500W
V : 48V DC / 5A
√3 0 – 1666W -1666 – +1666W
P : 110V DC 0 – 2000W -2000 – +2000W
0 – 350W -350 – +350W
ORDERING INFORMATION 380V 0 – 525W -525 – +525W
/ 1A
Specify code number and variables (e.g. LSMT2- √3 0 – 583W -583 – +583W
4150A1-M). Use Ordering Information Sheet (No. 0 – 700W -700 – +700W
ESU-1954-4). 0 – 1750W -1750 – +1750W
The unit is configured at the factory according to the 380V 0 – 2625W -2625 – +2625W
/ 5A
user's specifications, however, measuring items can be √3 0 – 2917W -2917 – +2917W
freely selected and assigned to up to 10 output chan- 0 – 3500W -3500 – +3500W
nels via the front panel control switches.
The measuring items are listed below:
A = Line current V = Line voltage
W = Watt, active power var = var, reactive power
PF = Power factor Hz = Frequency

P. 9 / 10 ES-1954 Rev.6
 LSMT2
•Reactive power
Input range and lag/lead can be changed via the front panel.
RATING RANGE
0 – lag 100 var lead 100 – lag 100 var
110V 0 – lag 150 var lead 150 – lag 150 var
/ 1A
√3 0 – lag 166.6 var lead 166.6 – lag 166.6 var
0 – lag 200 var lead 200 – lag 200 var
0 – lag 500 var lead 500 – lag 500 var
110V 0 – lag 750 var lead 750 – lag 750 var
/ 5A
√3 0 – lag 833 var lead 833 – lag 833 var
0 – lag 1000 var lead 1000 – lag 1000 var
0 – lag 200 var lead 200 – lag 200 var
220V 0 – lag 300 var lead 200 – lag 200 var
/ 1A
√3 0 – lag 333.3 var lead 333.3 – lag 333.3 var
0 – lag 400 var lead 400 – lag 400 var
0 – lag 1000 var lead 1000 – lag 1000 var
220V 0 – lag 1500 var lead 1500 – lag 1500 var
/ 5A
√3 0 – lag 1666 var lead 1666 – lag 1666 var
0 – lag 2000 var lead 2000 – lag 2000 var
0 – lag 350 var lead 350 – lag 350 var
380V 0 – lag 525 var lead 525 – lag 525 var
/ 1A
√3 0 – lag 583 var lead 583 – lag 583 var
0 – lag 700 var lead 700 – lag 700 var
0 – lag 1750 var lead 1750 – lag 1750 var
380V 0 – lag 2625 var lead 2625 – lag 2625 var
/ 5A
√3 0 – lag 2917 var lead 2917 – lag 2917 var
0 – lag 3500 var lead 3500 – lag 3500 var

Power factor: lead 0.5 – 1 – lag 0.5

lag 0.5 – 1 – lead 0.5
lead 0 – 1 – lag 0
lag 0 – 1 – lead 0
Input range and lag/lead can be changed via the front panel.

Frequency: 45 – 55 Hz, 55 – 65 Hz, 45 – 65 Hz

Input range can be changed via the front panel.

Watthours
Ratio: 110V – 77kV at the VT primary
5 – 8000A at the CT primary
Pulse unit: 0.01, 0.1, 1, 10, 100, 1000 kWh/pulse

CONNECTION DIAGRAM, INPUT

SOURCE A1 K LOAD
1
V1 V12 V31 A 2 k K
2
V2 V23 A3 k K
3
V3 k
N
V U CT CT CT
U V
VT
u v u v

1 2 3 4 5 6 7 8 9 10
P1 P3 P0 1S 1L 2S 2L 3S 3L

Specifications subject to change without notice.

P. 10 / 10 ES-1954 Rev.6