0.

00

RATE ANALYSIS.
SR. NET LEAD
DESCRIPTION OF ITEM QTY. RATE
NO. CHARGES

1 Excavation for foundation in hard murum

including shoring and strutting as necessary and
disposing off excavated stuff as directed etc. complete.
[A] Upto 1.50mtr. Lift, Normal rate

BASIC RATE AS PER SSR OF 2020-21 ITEM

NO. 12.04(a) & PAGE NO.75 216.00
ADD 10% FOR NOTIFIED TRIBAL AREAS 21.60
TOTAL RATE Rs. 237.60 PerCu.M.

2 Excavation for foundation in hard murum and

boulders including shoring and strutting as
necessary and disposing off excavated stuff as
directed etc. complete. [A] Upto 1.50mtr. Lift,
Normal rate
BASIC RATE AS PER SSR OF 2020-21 ITEM
NO. 12.06(a) & PAGE NO.75 258.00
ADD 10% FOR NOTIFIED TRIBAL AREAS 25.80
TOTAL RATE Rs. 283.80 PerCu.M.

3 Excavation for foundation in hard rock by chiselling

and wedging or line drilling including shoring and
strutting as necessary and disposing off excavated
stuff as directed etc. complete. (excluding dewatering)
[A] Upto 1.50mtr. Lift, Normal rate

BASIC RATE AS PER SSR OF 2020-21 ITEM

NO. 12.11(a) & PAGE NO.76 1763.00
ADD 10% FOR NOTIFIED TRIBAL AREAS 176.30
TOTAL RATE Rs. 1939.30 PerCu.M.

4 Providing and fixing 25mm diameter steel anchor

dowel in hard rock including drilling hole of 32 mm
diameter up to 0.75 mtrs depth, placing the dowel in
position and effectively grouting the hole with CM 1:1
proportion etc. complete.

BASIC RATE AS PER SSR OF 2020-21 ITEM

NO. 12.13 & PAGE NO.76 1356.00
ADD 10% FOR NOTIFIED TRIBAL AREAS 135.60
TOTAL RATE Rs. 1491.60 PerNo.
 RATE ANALYSIS.
SR. NET LEAD
DESCRIPTION OF ITEM QTY. RATE
NO. CHARGES
5 Providing and laying in situ / ready mix / ready mix
M10 cement concrete of trap/ granite/ quartzite/
gneiss metal in foundation including necessary
centering, formwork, bailing out water, compacting
and curing etc. complete. (with fully automatic micro
processor based PLC with SCADA enabled with
reversible drum type mixer/ concrete batch mix
plant (pan mixer) with natural /artifical sand)
BASIC RATE AS PER SSR OF 2020-21 ITEM
NO. 12.25 & PAGE NO.77 4980.00
ADD 10% FOR NOTIFIED TRIBAL AREAS 498.00
5478.00
ADD LEAD CHARGES FOR CEMENT 0.22000 202.64 44.58
ADD LEAD CHARGES FOR SAND 0.47000 290.67 136.61
ADD LEAD CHARGES FOR CR METAL 0.24000 290.67 69.76
ADD LEAD CHARGES FOR 40MM METAL CB 0.70000 278.56 194.99

5923.94
DEDUCT 117.00 FOR NON SCADA -117.00
TOTAL RATE Rs. 5806.94 PerCu.M.

6 Providing and laying weep holes of 100 mm

diameter AC/PVC pipes as per drawing for
abutment returns, return walls etc. Complete.
BASIC RATE AS PER SSR OF 2020-21 ITEM
NO. 17.37 & PAGE NO.114 439.00
ADD 10% FOR NOTIFIED TRIBAL AREAS 43.90
TOTAL RATE Rs. 482.90 PerRg.M.

7 Providing and laying in situ / ready mix M-15 plain

cement concrete of trap /granite/quartzite/ gneiss
metal for cast in citu piers, abutment, returns,
wings etc. including provision of "V" shaped false
joints to form suitable panels on the faces to approve
design with compacting by vibrating and curing
complete, including plywood/steel form work
centering ( excluding dewatering by means of pump)
and including bailling out water and curing finishing in
CM 1:3 etc. complete. as directed by engineer in
charge basic rate shall be increased for height above
5.00 m in following manners
(a) Height upto 5 M. (With Concrete Mixer) With
Natural / VSI standard Artificial Sand
i) Height up to 5 m, normal rate.
ii) Height 5 to 7.50 m, add 5 percent extra over basic
rate.
iii) Height 7.50 to 10 m, 7.50 percent extra.
iv) Over 10 m Height, add 10 percent extra for every
2.50m rise.

BASIC RATE AS PER SSR OF 2020-21 ITEM

NO. 17.38 & PAGE NO.114 6751.00
 RATE ANALYSIS.
SR. NET LEAD
DESCRIPTION OF ITEM QTY. RATE
NO. CHARGES
ADD 10% FOR NOTIFIED TRIBAL AREAS 675.10
7426.10
ADD LEAD CHARGES FOR CEMENT 0.33000 202.64 66.87
ADD LEAD CHARGES FOR SAND 0.45000 290.67 130.80
ADD LEAD CHARGES FOR CR METAL 0.33000 290.67 95.92
ADD LEAD CHARGES FOR 40MM METAL CB 0.52000 278.56 144.85

TOTAL RATE Rs. 7864.54 PerCu.M.

8 Providing and laying of filter media with granular

materials/ stone crushed aggregates satisfying
the requirements laid down in clause 2504.2.2 of
MoRTH specifications to a thickness of not less than
600 mm with smaller size towards the soil and bigger
size towards the wall and provided over the entire
surface behind abutment, wing wall and return wall to
the full height compacted to a firm condition as per
drawing and technical specifications etc. complete.

BASIC RATE AS PER SSR OF 2020-21 ITEM

NO. 12.72 & PAGE NO.82 1126.00
ADD 10% FOR NOTIFIED TRIBAL AREAS 112.60
ADD LEAD CHARGES FOR 40MM METAL CB 0.92400 278.56 257.39
ADD LEAD CHARGES FOR GRIT 0.39600 290.67 115.11

TOTAL RATE Rs. 1611.10 PerCu.M.

9 Providing, cutting, bending, hooking, tying and

laying in position TMT FE 500 steel bars for
reinforcement for all RCC works as per detailed
drawings etc. complete.
BASIC RATE AS PER SSR OF 2020-21 ITEM
NO. 14.01 & PAGE NO.84 63854.00
ADD 10% FOR NOTIFIED TRIBAL AREAS 6385.40
ADD LEAD CHARGES FOR STEEL 1.00000 202.64 202.64

TOTAL RATE Rs. 70442.04 PerM.T.

10 Providing and laying in situ / ready mix controlled

M-20 cement concrete of of trap / granite /
quartzite/ gniess metal for reinforced cement
concrete caps over piers and abutments including
necessary sacffolding plywood/steel formwork,
compacting by vibrating, finishing in CM 1:3 and
curing etc complete ( Excluding reinforcement) With
reversible drum type mixer/ concrete batch mix plant
(pan mixer) . with fine agreegates of required
specifications (Natural sand / VSI sand finely washed
etc )
BASIC RATE AS PER SSR OF 2020-21 ITEM
NO. 17.52 & PAGE NO.118 7201.00
ADD 10% FOR NOTIFIED TRIBAL AREAS 720.10
 RATE ANALYSIS.
SR. NET LEAD
DESCRIPTION OF ITEM QTY. RATE
NO. CHARGES
7921.10
ADD LEAD CHARGES FOR CEMENT 0.40000 202.64 81.06
ADD LEAD CHARGES FOR SAND 0.45000 290.67 130.80
ADD LEAD CHARGES FOR CR METAL 0.85000 290.67 247.07

TOTAL RATE Rs. 8380.03 PerCu.M.

11 Providing tar paper bearing including laying in

proper position etc. complete.
BASIC RATE AS PER SSR OF 2020-21 ITEM
NO. 13.02 & PAGE NO.83 86.00
ADD 10% FOR NOTIFIED TRIBAL AREAS 8.60
TOTAL RATE Rs. 94.60 PerSq.M.

12 Providing expansion joints with 25mm thick

bituminous pad as per detailed drawings etc.
complete.
BASIC RATE AS PER SSR OF 2020-21 ITEM
NO. 14.33 & PAGE NO.86 863.00
ADD 10% FOR NOTIFIED TRIBAL AREAS 86.30
TOTAL RATE Rs. 949.30 PerSq.M.

13 Providing and laying in situ / ready mix M25

controlled cement concrete of trap/ granite/
quartzite/ gneiss metal for RCC work in solid/ deck
slab etc. including ramming, vibrating, curing,
formwork, centering and finishing in cement plaster
excluding reinforcement etc. complete. (with fully
automatic micro processor based PLC with SCADA
enabled concrete batch mix plant / pan mixer and fine
agreegates of required specifications ( VSI sand finely
washed etc )
i) Height up to 5 m, normal rate.
ii) Height 5 to 7.50 m, add 5 percent extra over basic
rate.
iii) Height 7.50 to 10 m, 7.50 percent extra.
iv) Over 10 m Height, add 10 percent extra for every
2.50m rise.
BASIC RATE AS PER SSR OF 2020-21 ITEM
NO. 14.15 & PAGE NO.84 9955.00
ADD 10% FOR NOTIFIED TRIBAL AREAS 995.50
10950.50
ADD LEAD CHARGES FOR CEMENT 0.41000 202.64 83.08
ADD LEAD CHARGES FOR SAND 0.45000 290.67 130.80
ADD LEAD CHARGES FOR CR METAL 0.90000 290.67 261.60

11425.98
DEDUCT 117.00 FOR NON SCADA -117.00
TOTAL RATE Rs. 11308.98 PerCu.M.
 RATE ANALYSIS.
SR. NET LEAD
DESCRIPTION OF ITEM QTY. RATE
NO. CHARGES
14 Providing and laying in situ / ready mix M20 RCC of
trap/ granite/ quartzite/ gneiss metal for RCC
work of ballast walls, kerbs and box returns
including scaffolding, compaction, formwork finishing
and curing etc. complete. (excluding reinforcement,
with fully automatic micro processor based PLC with
SCADA enabled concrete batch mix plant / pan mixer
with fine agreegates of required specifications ( VSI
sand finely washed etc ) (A) RCC work of Ballast
walls & Kerb
BASIC RATE AS PER SSR OF 2020-21 ITEM
NO. 14.44 (a) & PAGE NO.86 8668.00
ADD 10% FOR NOTIFIED TRIBAL AREAS 866.80
9534.80
ADD LEAD CHARGES FOR CEMENT 0.35000 202.64 70.92
ADD LEAD CHARGES FOR SAND 0.42500 290.67 123.53
ADD LEAD CHARGES FOR CR METAL 0.85000 290.67 247.07

9976.32
DEDUCT 117.00 FOR NON SCADA -117.00
TOTAL RATE Rs. 9859.32 PerCu.M.

15 Providing railing of mild steel angle post 2.0m

center to center of section 75mm x 75mm x 10mm or
equivalent I/C section of height 1.05 above bridge
surface with minimum anchor length of 30cm
including hold fast of 25mm diameter MS bar welded
at the bottom and concreting of 1:3:6 of size 30cm x
30cm x 30cm with three rows of 40mm B class GI
pipe provided at 30cm on center to center including
scaffolding and one coat of anticorrosive paint with
two coats of oil painting, curing of concrete etc.
complete.
BASIC RATE AS PER SSR OF 2020-21 ITEM
NO. 14.48 & PAGE NO.87 2846.00
ADD 10% FOR NOTIFIED TRIBAL AREAS 284.60
TOTAL RATE Rs. 3130.60 PerRg.M.

16 Providing and laying 0.90 meter thick metal mat

consisting of rubble, oversize metal and normal
size metal in specified thickness as per detailed
drawing including supplying all materials, hand packing
of rubble, spreading metal in layers and hard murum
including watering and compaction with power roller
etc. complete.
BASIC RATE AS PER SSR OF 2020-21 ITEM
NO. 14.88 & PAGE NO.91 1172.00
ADD 10% FOR NOTIFIED TRIBAL AREAS 117.20
ADD LEAD CHARGES FOR RUBBLE 1.00000 355.61 355.61
ADD LEAD CHARGES FOR 60MM METAL 1.00000 278.56 278.56
ADD LEAD CHARGES FOR 40MM METAL 1.00000 278.56 278.56
ADD LEAD CHARGES FOR MURUM-HARD 0.33000 278.56 91.92
 RATE ANALYSIS.
SR. NET LEAD
DESCRIPTION OF ITEM QTY. RATE
NO. CHARGES

TOTAL RATE Rs. 2293.85 PerSq.M.

17 Providing earth work in embankment with

approved materials obtained from departmental/
Private land or other sources upto lead of 50m.
including all lifts, laying in layers of 20cm. to 30cm.
thickness breaking clods, dressing to the required
lines, curves, grades and section, watering and
compaction with Power roller to achieve not less
than 97 % of standard proctor density etc. complete
(Material obtained from departmental Land)
BASIC RATE AS PER SSR OF 2020-21 ITEM
NO. 2.27 & PAGE NO.28 172.00
ADD 10% FOR NOTIFIED TRIBAL AREAS 17.20
ADD LEAD CHARGES FOR EARTH 1.00000 278.56 278.56

TOTAL RATE Rs. 467.76 PerCu.M.

18 Supplying hard murum/ kankar at the road site,

including conveying and stacking complete.
BASIC RATE AS PER SSR OF 2020-21 ITEM
NO. 2.29 (a) & PAGE NO.29 321.00
ADD 10% FOR NOTIFIED TRIBAL AREAS 32.10
ADD LEAD CHARGES FOR MURUM-HARD 1.00000 278.56 278.56

TOTAL RATE Rs. 631.66 PerCu.M.

19 Spreading hard murum/ soft murrum/ gravel or

kankar for side width complete
BASIC RATE AS PER SSR OF 2020-21 ITEM
NO. 2.3 & PAGE NO.29 72.00
ADD 10% FOR NOTIFIED TRIBAL AREAS 7.20
TOTAL RATE Rs. 79.20 PerCu.M.

20 Compacting the hard murum side widths including

laying in layers on each side with power roller
including artificial watering etc. complete.

BASIC RATE AS PER SSR OF 2020-21 ITEM

NO. 2.31 & PAGE NO.29 16.00
ADD 10% FOR NOTIFIED TRIBAL AREAS 1.60
TOTAL RATE Rs. 17.60 PerSq.M.
 RATE ANALYSIS.
SR. NET LEAD
DESCRIPTION OF ITEM QTY. RATE
NO. CHARGES
21 Providing, laying, spreading and compacting stone
aggregates of specific sizes to water bound macadam
specification including spreading in uniform thickness,
hand packing to proper grade and camber, applying
and brooming requisite type of screening/ binding
Materials to fill up the interstices of coarse aggregate,
watering and compacting with Vibratory roller. to the
required density. By Mechanical Means - Grading I
(Using Screening -Grading I (Using Screening
Type B (11.20 mm) Aggregate)

BASIC RATE AS PER SSR OF 2020-21 ITEM

NO. 3.19 & PAGE NO.32 1843.00
ADD 10% FOR NOTIFIED TRIBAL AREAS 184.30
ADD LEAD CHARGES FOR 60MM METAL 1.21000 278.56 337.06
ADD LEAD CHARGES FOR 10MM METAL 0.24000 290.67 69.76
ADD LEAD CHARGES FOR SCREENING 0.08000 290.67 23.25

TOTAL RATE Rs. 2457.37 PerCu.M.

22 Providing and fixing board displaying information,

such as 'Name of work, Tender cost, Name of
Contractor, Work completion and liability period
etc., having rectangular shape of 1.20m x 0.90m
size made out 18 gauge (1.25mm) thick mild steel
sheet painted with one coat of Zinc chromate stoving
primer and two coats of enamel paint on front side
and grey stove enamel on back side and border /
messages / symbols etc. with approved colour shade
paint complete, on M.S.angle of size 35 x 35 x 3 mm
frame with properly cross braced M.S. angles of size
35mmx35mmx3mm duly painted including Two M.S.
angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65
m long painted with alternate black and white bands of
25 cm width including all fixtures etc.and fixing the
boards in 1:4:8 concrete block of size 60 cm x 60 cm
x 75 cm including, excavation, refilling, transportation,
and labour etc complete.
BASIC RATE AS PER SSR OF 2020-21 ITEM
NO. 6.36 & PAGE NO.54 8848.00
ADD 10% FOR NOTIFIED TRIBAL AREAS 884.80
TOTAL RATE Rs. 9732.80 PerNo.

Sectional Engineer, DEPUTY ENGINEER

Z.P.Sub-Division, Z.P (WORKS) SUB-DIVISION