0% found this document useful (0 votes)
118 views1 page

Jet-Lube Jacking Grease ECF - TDS - English

Environmentally friendly jacking grease for oil rigs

Uploaded by

Don Howard
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
118 views1 page

Jet-Lube Jacking Grease ECF - TDS - English

Environmentally friendly jacking grease for oil rigs

Uploaded by

Don Howard
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

JACKING GREASE ECF

OSPAR Commission – HOCNF (Harmonizes Offshore


Chemical Notification Point)
Classification – Yellow Rating for Norway (Yellow) PRODUCT CHARACTERISTICS
- E for the United Kingdom (E)
- Denmark PR-nr- 2180210 Appearance Beige Tacky Grease
Fluid Type Synthetic & Vegetable
DESCRIPTION Thickener Calcium Sulfonate
Complex
JET-LUBE® JACKING SYSTEM GREASE ECF™ is safe Specific Gravity 1.26
to use in offshore applications since it is metal free and is Density (lbs/gal) 10.55
formulated to conform to the strict North Sea US Steel Mobility, 0°F 100 grams per minute
Environmental Guidelines. It utilizes a water-resistant, Cone Penetration 275 - 300
calcium thickener that is enhanced to improve adhesion and @ 77°F (ASTM D-217)
provide greater protection against water wash off, wear, and Dropping Point >500°F (260°C)
(ASTM D-2265)
corrosion. JET-LUBE JACKING SYSTEM GREASE ECF
contains specially selected solid bounding lubricants to Water washout resistance <5%, typical
(ASTM D-1264)
provide outstanding galling resistance and lubrication
4-Ball (ASTM D-2596) >800 (7845)
properties. The solid boundary additives synergistically
Weld Point, kgf
combine to produce a superior lubricating film with high-load
Gas Evolution None, typical
and low-wear characteristics. The base oil b l e n d o f
Oil Separation <1%, typical
t h i s p r o d u c t is of lower viscosity than most
multipurpose greases allowing it greater potential for
Water Leaching
biodegradation and contains additional anti-wear, antirust, 2 hrs. @ 150°F <5%, typical
and antioxidant additives. Service Rating -4°F (-20°C) to
300°F (149°C)
APPLICATIONS Viscosity, Centipoise, (Brookfield)
JET-LUBE JACKING SYSTEM GREASE ECF is designed 5 RPM 592,000
to lubricate a wide array of heavily loaded gear applications. 10 RPM 332,000
It can also be used on slides, jacking systems, cantilever 20 RPM 214,000
type rigs and assemblies, nuts, bolts, and a wide range of Avg of 5 & 10 RPM 462,000
other applications making Jacking System Grease ECF a Avg of 10 & 20 RPM 273,000
nearly universal product. #7 spindle on a Brookfield HAT Viscometer at the following speeds
(shear rates)
 Excellent Environmental Properties
 High Load Resistance Environmental Rating:
 Water Resistant UK CEFAS OCNS Group D
 Corrosion Resistant
 Nonmetallic
 Safe for Offshore Personnel
For package types and part numbers
 Biodegradable, does not bio-accumulate contact [email protected].
 Outstanding Film Strength
 Easy to Apply LIMITED WARRANTY
 Operating Range -10°F (-23°C) to 450°C (232°C)

For warranty information please visit


http://www.jetlube.com/pdf/Jet-Lube_Warranty.pdf

www.jetlube.com • An ISO 9001 and 14001 registered company


Revised 3/2020 kc

You might also like