Scribd
Upload
232 views1 page

Wifi Lora 32 (V2) Pinout Diagram: GND Power

This document provides a pinout diagram for the WIFI LoRa 32(V2) board. It lists the pin numbers, names and functions for each pin including power supply pins, GPIO pins, analog pins, SPI pins, I2C pins and pins connected to on-board peripherals like the OLED display and LoRa module. Pins marked with an asterisk are for GPIO or ADC input only. The diagram notes that GPIO pins only support 3.3V and some pins must not be used unless the user understands how they are used by the on-board components.

Uploaded by

Cristhian Frade
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
232 views1 page

Wifi Lora 32 (V2) Pinout Diagram: GND Power

This document provides a pinout diagram for the WIFI LoRa 32(V2) board. It lists the pin numbers, names and functions for each pin including power supply pins, GPIO pins, analog pins, SPI pins, I2C pins and pins connected to on-board peripherals like the OLED display and LoRa module. Pins marked with an asterisk are for GPIO or ADC input only. The diagram notes that GPIO pins only support 3.3V and some pins must not be used unless the user understands how they are used by the on-board components.

Uploaded by

Cristhian Frade
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

WIFI LoRa 32(V2) Pinout Diagram Notes:

GND
*GPIO input only
*ADC preamplifier Power
GPIOs are 3.3V tolerant only
Control

GND GND Touch Pin

5V 3V3 GPIO Port pin

Vext 3V3 Analog Pin

Vext 36 GPIO36* ADC1_0* DAC


UO_RXD GPIO3 RX 37 GPIO37* ADC1_1*
Serial SPI I2C
UO_TXD GPIO1 TX 38 GPIO38* ADC1_2*
Physical Pin
RST 39 GPIO39* ADC1_3*
On-board
PRG Button Touch1 ADC2_1 GPIO0 0 34 GPIO34* ADC1_6 LoRa DIO2 hardware Pin

UO_RTS V_SPI_WP GPIO22 SCL 22 35 GPIO35* ADC1_7 LoRa DIO1

LoRa_MISO UO_CTS V_SPI_Q GPIO19 19 32 XTAL32 GPIO32* ADC1_4 Touch9

V_SPI_D GPIO23 23 33 XTAL32 GPIO33* ADC1_5 Touch8

LoRa_CS V_SPI_CLK GPIO18 18 25 GPIO25 ADC2_8 DAC2 LED

LoRa_SCK V_SPI_CSO GPIO5 5 26 GPIO26 ADC2_9 DAC1 LoRa_DIO0

OLED_SCL Touch3 HSPI_CSO ADC2_3 GPIO15 15 27 GPIO27 ADC2_7 TOUCH7 LoRa_MOSI

Touch2 HSPI_WP ADC2_2 GPIO2 2 14 GPIO14 ADC2_6 TOUCH6 LoRa_RST

OLED_SDA Touch0 HSPI_HD ADC2_0 GPIO4 4 12 GPIO12 ADC2_5 TOUCH5

U2_TXD GPIO17 17 13 GPIO13 ADC2_4 TPUCH4 GPIO21 -- Vext control

OLED_RST U2_RXD GPIO16 16 21 SDA GPIO21 V_SPI_HD Vext control LOW → Vext(3.3V/250mA) ON
HIGH → Vext(3.3V/250mA) OFF

Pins with this arrow are used by on-board OLED or LoRa, they must not
be used for other purpose unless you know what you are doing!

You might also like