Scribd
Upload
35 views1 page

Fady Farag 08-21-2019 0 MGA-19-05 Area 40 Tunnel - Calculation of Loads On Tunnel Walls 1 1

This document contains calculations of loads on tunnel walls for an area 40 tunnel project. It lists wind loads from various directions on structural elements like towers and filters for different wind cases. Case A calculates loads in the X and Z directions. Case B calculates loads in the X and Z directions separately. Case C and D calculate combined loads in various directions as percentages of Case A and B loads.

Uploaded by

Fady W. Iskander
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
35 views1 page

Fady Farag 08-21-2019 0 MGA-19-05 Area 40 Tunnel - Calculation of Loads On Tunnel Walls 1 1

This document contains calculations of loads on tunnel walls for an area 40 tunnel project. It lists wind loads from various directions on structural elements like towers and filters for different wind cases. Case A calculates loads in the X and Z directions. Case B calculates loads in the X and Z directions separately. Case C and D calculate combined loads in various directions as percentages of Case A and B loads.

Uploaded by

Fady W. Iskander
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

CALCULATION SHEET

PROJECT NOTES

PREPARED BY Fady Farag INITIAL DATE 08-21-2019 PROJECT NO. MGA-19-05 REV. NO. 0
CHECKED BY INITIAL DATE SHEET 1 OF 1 PRELIM. FINAL
SUBJECT Area 40 Tunnel - Calculation of loads on tunnel walls

Tower -X2 Tower -X1

Filter

Hopper

Tower +X2 Tower +X1


Wind Case (A) (L100)
X-Dir :
L1. W (+X1 Tower BLC 35) + W(+X2 Tower BLC 36) + W(+X Filter BLC31) + W(+X Hopper BLC 43)
L2. W (-X1 Tower BLC 37) + W (-X2 Tower BLC 38) + W(-X Filter BLC32) + W(-X Hopper BLC 44)
Z-Dir :
L3 W (-Z1 Tower BLC 39) + W (-Z2 Tower BLC 40) + W(-Z Filter BLC 34) + W(-Z1 Hopper BLC 45) + W(-Z2 Hopper BLC 46)
L4. W (+Z1 Tower BLC 41) + W (+Z2 Tower BLC 42) + W (+Z Filter BLC 33) + W(+Z1 Hopper BLC 47) + W (+Z2 Hopper BLC 48)
Wind Case (C): (L300) from Case (A)
+X,+Z:
L5= (L1)*0.75 + (L4)*0.75 Wind Case (D): (L400) from Case (B)
+X,-Z: +X+Z Dir:
L6= (L1)*0.75 + (L3)*0.75 1. (L9)*0.38 + (L10)*0.75 + (L13)*0.38 + (L14)*0.75
-X,+Z: 2. (L9)*0.38 + (L10)*0.75 + (L13)*0.75 + (L14)*0.38
L7= (L2)*0.75 + (L4)*0.75 3. (L9)*0.75 + (L10)*0.38 + (L13)*0.38 + (L14)*0.75
-X,-Z: 4. (L9)*0.75 + (L10)*0.38 + (L13)*0.75 + (L14)*0.38
L8= (L2)*0.75 + (L3)*0.75 +X-Z Dir:
5. (L9)*0.38 + (L10)*0.75 + (L15)*0.38 + (L16)*0.75
6. (L9)*0.38 + (L10)*0.75 + (L15)*0.75 + (L16)*0.38
7. (L9)*0.75 + (L10)*0.38 + (L15)*0.38 + (L16)*0.75
8. (L9)*0.75 + (L10)*0.38 + (L15)*0.75 + (L16)*0.38
-X+Z Dir:
9. (L11)*0.38 + (L12)*0.75 + (L13)*0.38 + (L14)*0.75
10. (L11)*0.38 + (L12)*0.75 + (L13)*0.75 + (L14)*0.38
Wind Case (B) (L200)
11. (L11)*0.75 + (L12)*0.38 + (L13)*0.38 + (L14)*0.75
+X Dir :
12. (L11)*0.75 + (L12)*0.38 + (L13)*0.75 + (L14)*0.38
L9= W (+X1 Tower BLC 35) + W(+X Hopper BLC 43)
-X-Z Dir:
L10= W(+X2 Tower BLC 36) + W(+X Filter BLC31)
13. (L11)*0.38 + (L12)*0.75 + (L15)*0.38 + (L16)*0.75
-X Dir:
14. (L11)*0.38 + (L12)*0.75 + (L15)*0.75 + (L16)*0.38
L11= W (-X1 Tower BLC 37) + W(-X Hopper BLC 44)
15. (L11)*0.75 + (L12)*0.38 + (L15)*0.38 + (L16)*0.75
L12= W (-X2 Tower BLC 38) + W(-X Filter BLC32)
16. (L11)*0.75 + (L12)*0.38 + (L15)*0.75 + (L16)*0.38
+Z Dir :
L13= W (-Z1 Tower BLC 39) + W(-Z1 Hopper BLC 45)
L14= W (-Z2 Tower BLC 40) + W(-Z Filter BLC 34) + W(-Z2 Hopper BLC 46)
-Z Dir:
L15= W (+Z1 Tower BLC 41) + W(+Z1 Hopper BLC 47)
L16= W (+Z2 Tower BLC 42) + W (+Z Filter BLC 33) + W (+Z2 Hopper BLC 48)

You might also like