Scribd
Upload
45 views5 pages

Australian Standard: Methods For The Measurement of Case Depth in Steels

This document is the Australian Standard for measuring case depth in steels. It outlines the standard's history and approval process. Various industry groups are represented in maintaining and reconfirming the standard. The full standard details the specific methods for measuring case depth in steel samples.

Uploaded by

gawa
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
45 views5 pages

Australian Standard: Methods For The Measurement of Case Depth in Steels

This document is the Australian Standard for measuring case depth in steels. It outlines the standard's history and approval process. Various industry groups are represented in maintaining and reconfirming the standard. The full standard details the specific methods for measuring case depth in steel samples.

Uploaded by

gawa
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 5

AS 1982—1993

Reconfirmed 2016
This is a free 4 page sample. Access the full version online.

Australian StandardR

Methods for the measurement


of case depth in steels
This Australian Standard was prepared by Committee MT/8, Metallography. It was approved
on behalf of the Council of Standards Australia on 26 October 1992 and published on
15 March 1993.
This is a free 4 page sample. Access the full version online.

The following interests are represented on Committee MT/8:


Australian Chamber of Manufactures
Bureau of Steel Manufacturers of Australia
Department of Defence
Railways of Australia Committee
University of Wollongong

Review of Australian Standards. To keep abreast of progress in industry, Australian Standards are subject to
periodic review and are kept up to date by the issue of amendments or new editions as necessary. It is important
therefore that Standards users ensure that they are in possession of the latest edition, and any amendments thereto.
Full details of all Australian Standards and related publications will be found in the Standards Australia Catalogue
of Publications; this information is supplemented each month by the magazine ‘The Australian Standard’, which
subscribing members receive, and which gives details of new publications, new editions and amendments, and of
withdrawn Standards.
Suggestions for improvements to Australian Standards, addressed to the head office of Standards Australia, are
welcomed. Notification of any inaccuracy or ambiguity found in an Australian Standard should be made without
delay in order that the matter may be investigated and appropriate action taken.
AS 1982—1993 (Reconfirmed) 2016-05-27

STANDARDS AUSTRALIA

RECONFIRMATION
OF
AS 1982—1993
Methods for the measurement of case depth in steels

RECONFIRMATION NOTICE
This is a free 4 page sample. Access the full version online.

Technical Committee MT-001 has reviewed the content of this publication and in
accordance with Standards Australia procedures for reconfirmation, it has been
determined that the publication is still valid and does not require change.

Certain documents referenced in the publication may have been amended since the
original date of publication. Users are advised to ensure that they are using the latest
versions of such documents as appropriate, unless advised otherwise in this
Reconfirmation Notice.

Approved for reconfirmation in accordance with Standards Australia procedures for


reconfirmation on 23 October 2015.

The following are represented on Technical Committee MT-001:


Australasian Corrosion Association
Australian Building Codes Board
Australian Institute of Architects
Australian Steel Association
Australian Steel Institute
Bureau of Steel Manufacturers of Australia
Employers And Manufacturers Association
Materials Australia
New Zealand Heavy Engineering Research Association
Society of Automotive Engineers—Australasia
This is a free 4 page sample. Access the full version online.

NOTES
This is a free preview. Purchase the entire publication at the link below:

AS 1982 : 1993 : EN : COMBINED PDF


This is a free 4 page sample. Access the full version online.

Looking for additional Standards? Visit SAI Global Infostore


Learn about LexConnect, All Jurisdictions, Standards referenced in Australian legislation

Need to speak with a Customer Service Representative - Contact Us

You might also like