Scribd
Upload
350 views

WPQR3

1) The document is a Welding Procedure Qualification Record (WPQR) that qualifies a TIG welding procedure for 6mm thick fillet welds in the PB position using a W42 5 W3Si 1 filler material. 2) The WPQR details the welding parameters, such as a DC current of 80-100 amps, voltage of 10-15 volts, and a heat input of 1.2 kJ/mm. 3) Upon satisfactory completion of welding and testing according to EN ISO 15614-1:2004, the examiner certified the welding procedure.

Uploaded by

Dimitris Nikou
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
350 views

WPQR3

1) The document is a Welding Procedure Qualification Record (WPQR) that qualifies a TIG welding procedure for 6mm thick fillet welds in the PB position using a W42 5 W3Si 1 filler material. 2) The WPQR details the welding parameters, such as a DC current of 80-100 amps, voltage of 10-15 volts, and a heat input of 1.2 kJ/mm. 3) Upon satisfactory completion of welding and testing according to EN ISO 15614-1:2004, the examiner certified the welding procedure.

Uploaded by

Dimitris Nikou
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 3

WELDING PROCEDURE QUALIFICATION RECORD

WPQR No: 003 (WPQR) according to EN ISO 15614-1:2014


Welding Procedure Qualification - Test Certificate
Manufacurer's WPQR No:003 Examiner or examination body
Manufacturer: TEIWM Reference No: WPS 003
Address: Koila, Kozani
Code/Testing standard: EN ISO 15614-1:2004
Date of welding: 09/01/2017
Range of Qualification
Welding Process (es): 141, TIG
Type of Joint and Weld: Fillet
Parent Material Group(s) and Subgroup(s): Group 1, Sub-Group 1.1
Parent Material Thickness (mm): 6
Weld Metal Thickness (mm): 8
Throat Thickness (mm): 4
Single Run/Multi Run: Multi-Run
Pipe Outside Diameter: 200
Filler Material Designation: W42 5 W3Si 1 (EN-ISO 636-A)
Filler Material Make: UNION I 52
Filler Material Size: ø2.4 mm
Designation of Shielding Gas/Flux: Ar 100%, I1
Designation of Backing Gas: N/A
Type of Welding Current and Polarity: DC-
Mode of Metal Transfer: N/A
Heat Input: 1.2 Kj/cm
Welding Positions: PB
Preheat Temperature: N/A
Interpass Temperature: N/A
Post-Heating: N/A
Post Weld Heat Treatment: N/A
Other Information:

Certified that the test welds prepared welded and tested satisfactory in accordance with the
requirements of the code/ testing standard indicated above.

Examiner or examination body Name, Date


Location Date of issue and Signature
WELDING PROCEDURE QUALIFICATION RECORD
WPQR No: (WPQR) according to EN ISO 15614-1:2014

Record of Weld Test


Location: Kozani Examiner or examination body:
Manufacturer's WPS No: 003 Method of preparation and cleaning: Grinding
Manufacturer's WPQR No: 003 Parent metal specification: S235 GH

Joint Design Welding Sequence

Material Thickness (mm): 6


Manufacturer: TEIWM Pipe Outside Diameter (mm): 200
Welder's Name: TANASI Welding Position: PB
Mode of Metal Transfer: N/A
Joint Type and Weld: Fillet
Weld Preparation Details (Sketch): As shown

Welding Details
Size of
Type of Wire Feed Travel Heat
Run Welding Filler Current Voltage Current/P Speed Speed Input Metal
Process Material (A) (V) Transfer
olarity (m/min) (mm/min) (Kj/mm)
(mm)

1 141 1.6 80-100 10_15 Dc- N/A N/A 1.2 N/A


2 141 1.6 80-100 10_15 Dc- N/A N/A 1.2 N/A

Filler Material Designation and Make: UNION I 52 Other Information:


Any Special Baking or Drying: N/A Weaving: N/A
Gas/Flux-Shielding: YES, Ar 100%, I1 Oscilation:N/A
Backing: N/A Pulse Welding Details: N/A
Gas/ Flow Rate-Shielding: N/A Distance Workpiece:
Backing: N/A Plasma Welding Details:
Tungsten Electrode Type/Size: 2% Th /2,4(mm) Torch Angle: 40°
Details of Back Gouging/Baking: N/A
Preheat Temperature: N/A
Intrepass Temperature: N/A
Post-Heating:
Post-Weld Heat N/A

You might also like