Scribd
Upload
566 views

Injector Specification: Stanadyne"

This document provides specifications for a Stanadyne injector nozzle holder assembly. It includes a parts list and description for the nozzle holder assembly parts. It also provides application information, listing the Stanadyne and customer part numbers for the injector and nozzle holder assembly, the inscription code, opening pressure specifications in MPa and PSI, maximum valve lift in mm and inches, and number and diameter of holes for the injector.

Uploaded by

Miguel Rojas
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
566 views

Injector Specification: Stanadyne"

This document provides specifications for a Stanadyne injector nozzle holder assembly. It includes a parts list and description for the nozzle holder assembly parts. It also provides application information, listing the Stanadyne and customer part numbers for the injector and nozzle holder assembly, the inscription code, opening pressure specifications in MPa and PSI, maximum valve lift in mm and inches, and number and diameter of holes for the injector.

Uploaded by

Miguel Rojas
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

PAGE 1.

STANADYNE”
INJECTOR SPECIFICATION

EDITION: I NOZZLE HOLDER


APPLICATIONS: SEE PAGE 2 ASSEMBLY NO. 32099
DATED: 01-23-95 SUPERSEDES:
CUSTOMER: AIFO CUSTOMER PART NO. SEE PAGE 2

TEST STAND: IS0 8984 NOTE: Reference Conventional Injector


1. CALIBRATION FLUID...SAE J967 / IS0 41 I3 Service Manual 991 I8 for additional
(Ref. S.B. 201). AT ROOM TEMPERATURE (70”-80” F) service information.
2. CALIBRATING HIGH PRESSURE PIPES... 0.063 X 12”
(I.6 X 305 mm)

ITEM PART
NO. NO. QTY. DESCRIPTION

1 780905 I SCREW, inlet union I *(lPREFERRED2MAX.)


(torque to 7-9 N-m)
PART THICKNESS
NO. mm (inches)
2 772052 2 GASKET
781229 1.000 (.0397)
781230 1.050(.0413)
781231 1.100(.0433)
3 31042 1 BODY ASSY, 781232 1.150(.0453)
nozzle holder 781233 1.200(.0472)
781234 1.250(.0492)
A QKC * 1.300(.0512)
SHIM,
1.350(.0531)
1 - 1 TikE 1 1 pressure adjusting 1.400 (.0551)
781238 1.450 (.0571)
781239 1.500(.0591)
31189 1 SPRING, 781240 1.550(.0610)
781241 1.600 (.0630)
pressure adjusting 781242 1.650 (.0650)
781243 1.700 (.0669)
-.-.
31044 1 SEAT, spring 1.750(.0689)
1.800(.0709)
781246 1.850 (.0728)
781247 1.900(.0748)
7 29418 I PLATE ASSEMBLY,
adapter

1 NOZZLE ASSEMBLY, hole


(not included in no& holder assembly)

8 IPAGE I
9 31046 I NUT, nozzle retaining
(torque to 67.8-81.4 N.m / 50-60 Ibfft)

FORENGINEERINGIJSEONLY

DATE ECNNO. EDITION


--
01-23-95 23588 1
PAGE :!

APPLICATION AND SERVICE INFORMATION


FOR HOLDER ASSEMBLY 32099

INJECTOR

STANADYNE CUSTOMER INSCRIPTION STANADYNE >I APPLICATION


PART NO. PART NO. CODE PART NO.

32098 8020083 PER 70157 31047 8018406 PER 70157 8460.SRM 50.10
SDLLA15oP31047

OPENING PRESSURE
NEW AND SERVICE
INJECTOR MAX VALVE LIFT NO. OF HOLES
NO. MPa (PSI) mm (inches) @ DIA. mm (inches)

32098 28.0 - 28.8 (4060-4176) 0.425 (.0167) 4 QO.43 (.0169)

For Bar multiply MPa by 10


Maximum valve lift for service: +O.O5mm beyond value shown in table

,--.

You might also like