Scribd
Upload
145 views

EBA 7260 Engl

This document summarizes the technical specifications and features of the EBA 7260 guillotine. It has a maximum cutting length of 720 mm and height of 80 mm. It features an EASY-CUT blade activating system for safe cutting, along with safety systems like a light beam curtain and two-hand operation. The guillotine can be programmed with 99 programs containing 99 steps each. It allows both automatic and manual control of the backgauge and blade movement.

Uploaded by

Rina Rachman
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
145 views

EBA 7260 Engl

This document summarizes the technical specifications and features of the EBA 7260 guillotine. It has a maximum cutting length of 720 mm and height of 80 mm. It features an EASY-CUT blade activating system for safe cutting, along with safety systems like a light beam curtain and two-hand operation. The guillotine can be programmed with 99 programs containing 99 steps each. It allows both automatic and manual control of the backgauge and blade movement.

Uploaded by

Rina Rachman
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

max.

EBA 7260 80 mm

Our top model: guillotine with EASY-CUT, hydraulic clamp,


72 cm
programmable power backgauge with electronic control module
and IR light beam safety curtain on the front table.

Cutting length 720 mm


Cutting height 80 / 78* mm
Narrow cut 20 / 90* mm
Table depth 720 mm
* with false clamp installed

Technical specifications Product characteristics


Power 400 V / 50 Hz / 3~ (three phase)* Equipped with the new, patented EASY-CUT blade activating bars for convenient and safe cutting.
Capacity 1.9 kW Comprehensive SCS safety package: IR light beam safety curtain on the front table; safety cover
on the rear table; main switch and safety lock with key; electronically controlled true two-hand
0.1 kW backgauge drive
operation; 24 volt controls (low voltage); p ­ atented safety drive; automatic blade and clamp return
from every position; disc brake for instant blade stop; blade changing device with covered cutting
edge; blade depth adjustment from the outside of the m ­ achine; easy blade and cutting stick
change from the front of the machine without removing covers. Hydraulic clamp drive. Clamping
pressure infinitely adjustable (min. 250 daN, max. 2000 daN) with optical indicator. Snap-in false
clamp plate with optical indicator for delicate work. Foot pedal for pre-clamping or as mecha-
nical cutting line indicator. Optical cutting line with bright and durable LEDs. Electro-
mechanical backgauge drive with precision spindle for exact positioning (backgauge speed: 
53 mm/sec.). Electric backgauge drive with touch pad for easy setting, multilingual operator
guidance and digital display. Measurement readout in cm or inches (display accurate to 1/10
mm or 1/100 inch). 99 programs with 99 steps in each program (up to 15 repeat cuts can be
integrated into a program as one single program step). Program runs automatically. 10-button
key pad for presetting of measurement. Integrated calculator. Pre-programmed measurements
Dimensions 1335 x 1305 x 1540 mm (H x W x D) for standard paper sizes. Programmable keys for quick setting of frequently needed measure-
ments. Memory key for repeat cuts. Automatic SET function for ­reference measurement via start
width with side tables 2100 mm
button. Programmable EJECT function - for pushing out the paper. Self-diagnostic system with
depth with side tables 1600 mm
error indication on display. Electronic hand wheel for manual backgauge positioning with
Weight 588 kg without side tables ­infinitely variable speed ­control. Three-step front table illumination (LEDs). Electro-­mechanical
628 kg with side tables blade drive. Solid steel blade carrier with adjustable guide plates on both sides. Blade made of
German high quality HSS steel. Solid a ­ ll-metal construction. Complete with air table (air jets on
front and rear table), p
­ ractical tool holder and stacking angle. Optional set of side tables (left and
right) available at an extra cost.

WWW.EBA.DE
EBA 7260
Features

IR SAFETY CURTAIN EleCTRONIC HAND WHEEL Patented EASY-CUT activating bars


The light beam safety curtain in the working Ideal for manual backgauge positioning, the A cut can be executed conveniently by means
area of this professional guillotines ensures electronic hand wheel has infinitely variable of the patented EASY-CUT blade activating
the highest level of safety and cutting con- speed control from very slow to very fast. bars, which guarantee a safe two-hand
venience. operation.

Large 7-inch Touch pad Practical tool holder SAFE BLaDE CHANGe
Extremely convenient: Electronic, programmable The practical hook-in tool holder is placed on Safe and convenient blade change without
control module for the power backgauge with the back table and keeps all necessary tools removing covers. Blade changing device covers
multi-lingual touch pad. 99 programs with 99 for blade change and service jobs within reach. cutting edge of blade to protect the operator.
steps in each program can be stored.

Technical data approximate. Subject to change. 06/2019

You might also like