MD6250

Rotary Blasthole Drill

Specifications
11.2 or 13.6 m (36.7 or 44.6 ft)
Mast Configurations

Description Basic Specs (continued)

The MD6250 crawler-mounted blasthole drill is designed to drill U.S. EPA Tier 2 equivalent
from 152-250 mm (6-9.8 in) diameter holes. MD6250 is optimized Engine C27 ACERT™ @ 1,800 rpm
for single-pass or multi-pass drilling, in both Rotary and DTH
Emissions U.S. EPA Tier 2 equivalent
drilling modes.
Rated horsepower 652 kW 875 hp
Basic Specs Elevation capability 4750 m 15,000 ft
U.S. EPA Tier 4 Final
11.2 m (36.7 ft) mast
Engine C27 ACERT @ 1,800 rpm
Hole diameter range Up to 152­ Up to 6-9.8 in
Emissions U.S. EPA Tier 4 Final
250 mm
Rated horsepower 655 kW 879 hp
Hole depth range
Elevation capability 3658 m 12,000 ft
Single pass depth 11.2 m 36.7 ft
Compressor, Rotary drilling 56.6 m /min (2,000 ft3/min)
3
Multi-pass depth Down to 53.6 m Down to 176.7 ft
@ 8.6 bar (125 psi)
Pull-down capacity Up to 20 411 kg Up to 45,000 lb
Compressors, DTH drilling 38.2 m3/min (1,350 ft3/min)
Hoist capacity Up to 20 411 kg Up to 45,000 lb @ 34.4 bar (500 psi)
Hoist speed 0.81 m/sec 2.67 ft/sec 42.2 m3/min (1,500 ft3/min)
Bit load (single pass) Up to 22 321 kg Up to 49,210 lb @ 24.1 bar (350 psi)
13.6 m (44.6 ft mast) Angle drilling available 30° (in 5° increments)
Hole diameter range Up to 152­ Up to 6-9.8 in
250 mm
Hole depth range
Single pass depth 13.6 m 44.6 ft
Multi-pass depth Down to 37.9 m Down to 124.6 ft
Pull-down capacity Up to 29 483 kg Up to 65,000 lb
Hoist capacity Up to 22 113 kg Up to 48,750 lb
Hoist speed 0.66 m/sec 2.16 ft/sec
Bit load (single pass) Up to 32 655 kg Up to 71,993 lb
MD6250 Specifications

Engine Choices Receiver Tank Choices

U.S. EPA Tier 2 equivalent • Low pressure 8.6 bar (125 psi) for ASME/CRN/AU or CE
Engine C27 ACERT @ 1,800 rpm • High pressure 24.1 or 34.4 bar (350 or 500 psi) for

Emissions U.S. EPA Tier 2 equivalent ASME/CRN/AU or CE

Rated horsepower 652 kW 875 hp

Cooling

U.S. EPA Tier 4 Final

Engine C27 ACERT @ 1,800 rpm • Coolers with easy cleaning access
Emissions U.S. EPA Tier 4 Final
• Separate engine cooling module
• All cooler core sections are replaceable
Rated horsepower 655 kW 879 hp

• Functional in ambient temperature of 52° C (125° F)

• Dual starter motors • Automatic variable speed fan control
• Ether starting aid
• Scheduled oil sampling (S∙O∙SSM) ports Regulatory Compliance

• Common air intake filters provide +500 hour service interval

normal operating conditions • CE compliant
• EAEU certifiable
Compressor Choices
• CSA certified
• Tier 2 and Tier 4 Final configurations
DTH drilling Includes tool lubrication • MDG15 and MDG41 aligned
and hammer storage
1350 cfm/500 psi 38.2 m3/min (1,350 ft3/min) @ Climate Choices

34.4 bar (500 psi) includes 113 L

(30 gal) tool oiler Climate Level 1 Standard f luids and lubricants
1500 cfm/350 psi 42.2 m3/min (1,500 ft3/min) @ • –1° C (30° F)
24.1 bar (350 psi) includes 113 L • Withstands high heat to 52° C (125° F)
(30 gal) tool oiler Climate Level 2 Arctic f luids and lubricants
Rotary drilling Includes lubrication system • –18°C (– 0.4°F)
2000 cfm/125 psi 56.6 m3/min (2,000 ft3/min) @ Climate Level 4 Arctic f luids and lubricants
8.6 bar (125 psi) optional tool • – 40°C (– 40°F) Level 4 Arctic fluids and lubricants; –40°C
oiler 113 L (30 gal) (–40°F) Temps
With the compressors variable volume control, the operator can • Engine coolant and water tank heater, battery trays and
limit air output and engine speed both resulting in reduced fuel provision for fuel heating – diesel fi red
consumption. All of these compressors contain this feature. • 50 Hz High Pressure (or choose Low Pressure) Compressor,
Tier 4 engine
Compressor control box enclosure with purged air lines • Arctic fluids, Genset ready, heaters and blankets for tanks,
extra batteries, heated water suction lines, drill pipe thread
grease bucket
• Shore power connection box with switchable 240-600 volt,
50 amp waterproof connection

 MD6250 Specifications

Frame and Work Deck

Hydraulics

• Jacks, mast pivot and deck are welded integrally to mainframe • Auxiliary circuit pump
for maximum durability and long life • Two fan pumps
• Stationary drill deck for vertical and angle drilling • Two primary pumps
• Four leveling jacks provide leveling on a 7° bench (any orientation) • Charge pump
• Slip resistant surface on all decks and walkways • Scheduled Oil Sampling (S∙O∙S) ports
• Fuel tank capacity 1609 L (425 gal)
• Fuel capacity expansion for additional 1609 L (425 gal) Mast and Pipe Carousel Features

• Three (3) egress points on deck areas in addition to main access

• Heavy duty tow hooks (front end) • 11.2 m (36.7 ft) mast pipe carousel; takes four 10.6 m (35 ft) pipes
• Four (4) lift lugs, for use with cables or chains for 53.6 m (176.7 ft) total hole depth
• Walkway, with railing and toe guards, for cab perimeter • 13.6 m (44.6 ft) mast pipe carousel; takes four 7.6 m (20 ft) pipes
to drill deck for 37.9 m (124.6 ft) total hole depth
• Fire suppression ready (includes platform on non-drill end to • Vertical or angle drilling 0-30°; in 5° increments
mount bottles, and frame around power train to mount nozzles) • Hydraulically actuated, self-indexing pipe carousel accepts
• Deck mounted jib crane with 750 kg (1,653 lb) various pipe diameters
• Pipe guide roller assembly mounted on drill deck for loading • All mast configurations are designed for changing bit above deck
drill pipe • Single cylinder pulldown/hoist system
• Auto tensioning of pull down and hoist cables
Frame Access Choices
• Deck wrench fits flats of corresponding drill pipe diameters
and DTH hammer
• Access ladder to the cab area with spring loaded self-closing gate • Feed system accommodates multiple pipe diameters
• Cascading, hydraulic stairs with walkway around the cab to the • Base plate bushing diameters accommodate bits 152-216 mm
deck. Includes tram interlock for when the ladder is down. (6.0-8.5 in)
• Hydraulic break out wrenches (HOBO) available with adjustable
Drill Deck Misc.
grip ranges
• Configured with roller deck bushing
• Toolbox • Pipe positioner with pipe diameter specific inserts
• Hydraulic viewing hatch on drill deck with spotlight • Overhead winch with remote; variable speed drive with ≥ 1818 kg
• Drill pipe thread greaser with remote fill tank or disposable (4,000 lb) rating, length to reach 6 m (20 ft) past drill deck (option)
grease bucket • Tool oiler, 113 L (30 gal) oil injection system
• Deck mounted jib crane with 750 kg (1,653 lb) • Variable hydraulic break out wrench grip range choices are
114 mm to 152 mm (4.5 in to 6.0 in) or 152 mm to 216 mm
Undercarriage
(6.0 in to 8.5 in)
• Camera on mast is closed circuit and used to view the pipe
Model Cat® 336E EL Excavator type carousel/top drive operation
Ground clearance 618 mm 24 in • Pipe positioner for angle drilling, multi-pass pipe handling
• Rotation gear box with single motor, up to 160 rpm, up to
Carrier rollers Three carrier rollers
11 600 N∙m (8,555 lbf-ft) torque
Track guiding guards Two • Manual pipe catcher – One (1) wire rope hydraulically actuated
and guides pipe catcher, pipe positioner, manual bit basket or
Drawbar pull 417 000 N 93,745 lbf • Hydraulic – One (1) hydraulic pipe catcher, hydraulically
Travel speed display 2.45 kph 1.5 mph actuated pipe positioner, hydraulic bit basket
Triple grousers 600 mm (23.6 in); for hard rock
1.44 bar (21 psi) ground pressure
Triple grousers 750 mm (29.5 in); for soft rock
1.17 bar (17 psi) ground pressure

MD6250 Specifications

Mast Packages: Standard or Premium Choices

Tool Package Rotary

11.2 m (36.7 ft) Mast • One-piece roller deck bushing

Single pass depth 11.2 m 36.7 ft • Pipe positioner roller
Multi pass depth Down to 53.6 m Down to 176.7 ft • Deck wrench
• Cross over subs
Pulldown – rated single Up to 20 411 kg Up to 45,000 lb
• Pipe wiper seal
cylinder pull-down/
• Drill tool lubricator
hoist system
Hoist Up to 20 411 kg Up to 45,000 lb Tool Package DTH

13.6 m (44.6 ft) Mast

Single pass depth 13.6 m 44.6 ft • Two-piece bushing
• Pipe positioner inserts
Multi pass depth Down to 37.9 m Down to 124.6 ft
• Sliding deck wrench
Pulldown Up to 29 483 kg Up to 65,000 lb • Cross over adapter for hammer
Hoist Up to 22 113 kg Up to 48,750 lb • Pipe wiper seal
Angle drilling Available with any mast
Overhead Winch System with remote (option)

Mast Accessories

Capacity rating 1818 kg 4,000 lb

• 11.2 m (36.7 ft) or 13.6 m (44.6 ft) Manual pipe catcher – One (1) Cable diameter 13 mm 0.5 in
wire rope hydraulically actuated pipe catcher, pipe positioner, Reach – past the drill deck 6.1 m 20 ft
manual bit basket
• Variable speed drive
• 11.2 m (36.7 ft) Mast Hydraulic – One (1) hydraulic pipe catcher,
hydraulically actuated pipe positioner, hydraulic bit basket
• 13.6 m (44.6 ft) Mast Hydraulic – One (1) hydraulic pipe catcher,
Rotary Head Top Drive System
plus one (1) wire rope, hydraulically actuated pipe positioner, Torque, single motor 11 600 N∙m 8,555 lbf-ft
hydraulic bit basket
Rotation speed 0-150 rpm
Drill Pipe (Mast size dependent)
• Spindle – 138 mm (5.5 in) API regular thread with splined collar,
shock sub
7.6 m (2 0 f t) pipes 13.6 m (4 4.6 ft) Mast – Requires quantit y of four (4) • Rotary torque control
Rotary/DTH 127 mm 5 in • Virtual rotary head travel interlocks
Rotary 152 mm 6 in
Rotary 178 mm 7 in
Rotary 193 mm 7.625 in
DTH 139 mm 5.5 in
DTH 165 mm 6.5 in
10.6 m (3 5 f t) pipes 11.2 m (3 6.7 f t) Mast – Requires quantity of four (4)
Rotary/DTH 127 mm 5 in
Rotary 152 mm 6 in
Rotary 178 mm 7 in
Rotary 193 mm 7.625 in
DTH 139 mm 5.5 in
DTH 165 mm 6.5 in

 MD6250 Specifications

Operator Environment
Operating System Controls (Standard)

• Spacious FOPS cab has 3 m 2 (32.4 ft2) floor space with an • All electric controls for drilling, tramming, leveling plus
integrated operator station auxiliary functions
• Cab rubber shock-mounts absorb mechanical vibration and • Rotary torque control
restrict exterior noise • Virtual rotary head travel stops
• Operator station design integrates an ergonomic seat, joystick • Pipe positioner engaged/disengaged indicator
controls with full instrumentation, and dual 254 mm (10 in) color • Drill depth meter
displays, high definition screen and 12 volt power port • Drill performance and display system
• Additional display screen for cc cameras; color, high-defi nition • Pump drive gearbox temperature system
254 mm (10 in) • Delayed engine shut down
• Power convertor 24V to 12V • Filter indicators for hydraulic, fuel, compressor and engine
• Radio-ready for communication and entertainment radio • Jack pressure sensors in display
• Top of cab access ladder • Data logging of machine health with warnings and fault code
• Two swing out doors and Cat keyed locks records with export capability
• Literature holder • Dust suppression control
• Mast lock indicator
Seating: • ECM proportional fan speed control system
– Seat cover in fabric, or a leather option with heat and cooling • Tram interlock, machine stability limits
– Seat swivels, locks and has two point/76 mm (3 in) seat belt, • Tram interlock, pipe in hole
tilts (5° adjustment), lumbar support, fore/aft seat adjustment • Tram interlock, mast up and locked or down and parked
80 mm (3.1 in) • Tram interlock, jack retracted
– Fold away trainer’s seat with seat belt (option)
• Tram interlock, winch parked
Windows:
• Cab environment controls (AC, filter, heat, fan speeds)
– Large windows front, rear and right cab side; full length drill • Pre wired for Terrain and Autonomous Operation
window with guard (option), single or double pane glass
– Window shade (option) Premium Controls

– Windshield wipers with a common washer tank

– Manometer Pressure Gauge (option)
• Package 1 Controls, Drills Assist
Lighting:
• Auto level
– LED interior lights and map light at operators seat, backlit
• Auto mast
joysticks and keypads
• Auto drill single pass
– Flood lights for the drill perimeter • Auto retract
– Spot lights for power group area; drill deck; mast carousel;

access ladder and walkways

Automation and Technology

– Standard lighting is 1,300 lumens flood light on perimeter,

area spot lights have 1,950 lumens

• Autonomous ready
– Premium lighting is 4,200 lumens per flood light on perimeter • Drill depth indicator
– Mast clearance lights, cab mounted strobe, front mounted • Drill Assist (auto level, auto retract, auto mast, single pass
tram beacon
auto drill)
HVAC:
• Cat Terrain ready
– HVAC floor vent in the foot rest area • Product Link Elite – Satellite, Cellular, Dual (options)
– Roof-mounted air conditioner/heating/pressurizing unit • Wiring for third party interface
– Filter access from deck, 500 service interval
– Defogging HVAC vents on main window

Cameras:

– Two (2) CC cameras (front and left side) providing 360° vision
coverage from operators seat
– Camera on the mast to view pipe carousel/top drive operation

MD6250 Specifications

Dust Control Choices

Safety and Security

Water injection – tank mounted 1271 L 336 gal • Fire suppression ready
below front deck • Approach angle of 15 degrees facilitates loading and unloading
Self-purging for winterization on a lowboy
Water f low meter, volume control, tank fill level indicator • Alloy drill deck covers, for servicing when mast is horizontal
• Seven (7) engine shut down buttons, by each drill egress/access
Water injection plus dust collector
point, in cab, in engine area, on drill deck
127 m3/min (4,500 ft3/min) dust collector; includes standard • Hinged window guard over the full length of the front drill window
water injection • Three (3) egress points on deck areas in addition to main access
Dust collector box with ground level access • Self-closing gates secure egress ladder locations
Self-cleaning filters, dust chute clean-out door • Electric horn activated by push button in the cab
• Automatic tram alarm with yellow strobe light
High volume water injection 2786 L 736 gal
• Under deck mount battery box with keyed battery disconnect/
(maximum) – tanks total
starter lockout/remote jump start terminals
capacity
• Air hose retention device
Tank below deck – capacity 1514 L 400 gal • Slip resistant surfaces
(isolated for extreme cold • Tow hooks
weather) • Lifting lugs
Tank above deck – capacity 1271 L 336 gal
• Foam injection system Service Packages

• Static dust curtains, four sides boxed enclosed

• Water pump interlock • Basic – Centralized manual lubrication for all pivot points,
• Dust curtain hydraulic lifters raise front and rear dust curtains gravity fill for fuel and water
(option) (recommended with dust collector) • Standard – Fast fill for fuel and water, automated lubrication system
• Tram off spray system (option) • Premium – Service center for lubricant drain and fi ll, automated
lubrication system, fast fill fuel and water, blowdown hose

 MD6250 Specifications

Dimensions

All dimensions are approximate.

2
1

4 2 5
1

11.2 m (36.7 ft) Mast 13.6 m (44.6 ft) Mast

1 Width front 5.624 m 18.45 ft 5.624 m 18.45 ft
2 Width rear 4.819 m 15.81 ft 4.819 m 15.81 ft
3 Height mast up 17.011 m 55.81 ft 19.460 m 63.84 ft
4 Body length 11.708 m 38.41 ft 11.708 m 38.41 ft
5 Length mast down 17.721 m 58.13 ft 20.170 m 66.17 ft

Weights
Working weight range 56 468 kg to 64 154 kg 124,490 lb to 141,436 lb

MD6250 Configuration Choices

Mandatory Choices

Mandatory choices may vary. Consult your Cat dealer for details.

ENGINE FRAME ACCESS MAST ACCESSORIES

• C27 ACERT, 652 kW (875 hp), 1,800 rpm • Fixed access ladder • 11.2 (36.7 ft) or 13.6 (44.6 ft) Mast
Tier 2 equivalent • Cascading, hydraulic stairs with walkway – Manual pipe catcher – One (1) wire rope
• C27 ACERT, 655 kW (879 hp), 1,800 rpm around the cab to the deck hydraulically actuated pipe catcher, pipe
Tier 4 Final positioner, manual bit basket
UNDERCARRIAGE • 11.2 m (36.7 ft) Mast
COMPRESSOR/RECEIVER TANK • 600 mm (23.6 inch) triple grousers – hard – Hydraulic – One (1) hydraulic pipe catcher,
• Rotary/Low Pressure: rock with rock guards hydraulically actuated pipe positioner,
– 56.6 m3/min (2,000 ft3/min) @ 8.6 bar • 750 mm (29.5 inch) triple grouser – soft rock hydraulic bit basket
(125 psi); with Low Pressure Receiver • 13.6 m (44.6 ft) Mast
Tank for ASME/CRN/AU or CE Tank MAST – Hydraulic – One (1) hydraulic pipe catcher,
• DTH/High Pressure: • 11.2 m (36.7 ft) Mast plus one (1) wire rope, hydraulically
– 38.2 m3/min (1,350 ft3/min) @ 34.4 bar – Single pass depth – 11.2 m (36.7 ft) actuated pipe positioner, hydraulic
(500 psi), with High Pressure Receiver – Multi pass depth – Up to 53.6 m (176.7 ft) bit basket
Tank (500 psi) for ASME/CRN/AU or – Vertical or angle drilling package
CE Tank; hammer storage and 113 L PIPE CAROUSEL
• 13.6 m (44.6 ft) Mast
(30 gal) tool oiler • Quantity four (4) – 7.6 m (20 ft) pipe for
– Single pass depth – 13.6 m (44.6 ft)
– 42.2 m3/min (1,500 ft3/min) @ 24.1 bar 13.6 m (44.6 ft) mast
(350 psi), with High Pressure Receiver – Multi pass depth – Up to 37.9 m (124.6 ft)
• Quantity four (4) – 10.6 m (35 ft) pipe for
Tank (350 psi) for ASME/CRN/AU or – Vertical or angle drilling package 11.2 m (36.7 ft) mast
CE Tank; hammer storage and 113 L
(30 gal) tool oiler BREAK OUT WRENCH
• Variable grip hydraulic break out wrench
DRILL DECK MISCELLANEOUS grip range:
• Toolbox – 114-152 mm (4.5-6.0 in)
• Jib crane – 152-216 mm (6.0-8.5 in)
• Drill pipe thread greaser with remote fill
tank or disposable grease bucket

 MD625 0 Configuration Choices

Mandatory Choices (continued)

Mandatory choices may vary. Consult your Cat dealer for details.

DRILL TOOL PACKAGES – 11.2 m (36.7 ft) MAST DRILL TOOL PACKAGES – 13.6 m (44.6 ft) MAST OPERATOR ENVIRONMENT
• Rotary 127 mm (5 in) pipe diameter – • Rotary 127 mm (5 in) pipe diameter – • Lighting
One (1) piece roller deck bushing, pipe One (1) piece roller deck bushing, pipe – Standard Light, 1,300 lumens flood
positioner roller, deck wrench, cross over positioner inserts, sliding deck wrench, light on perimeter, area spot lights have
subs, pipe wiper seal, drill tool lubricator cross over hammer adapter, pipe wiper seal 1,950 lumens
• Rotary 152 mm (6 in) pipe diameter – • Rotary 152 mm (6 in) pipe diameter – – Premium Light, 4,200 lumens per flood
One (1) piece roller deck bushing, pipe One (1) piece roller deck bushing, pipe light on perimeter, area spot lights have
positioner roller, deck wrench, cross over positioner inserts, sliding deck wrench, 1,950 lumens mast clearance lights and
subs, pipe wiper seal, drill tool lubricator cross over hammer adapter, pipe wiper seal cab mounted yellow strobe light and front
• Rotary 165 mm (6.5 in) pipe diameter – • Rotary 165 mm (6.5 in) pipe diameter – mounted tram beacon
One (1) piece roller deck bushing, pipe One (1) piece roller deck bushing, pipe • Seat
positioner roller, deck wrench, cross over positioner inserts, sliding deck wrench, – Cat fabric seat with (76 mm/3 in) inertia
subs, pipe wiper seal, drill tool lubricator cross over hammer adapter, pipe wiper seal reel and a three point harness
• Rotary 178 mm (7 in) pipe diameter – • Rotary 178 mm (7.0 in) pipe diameter – – Cat leather seat, heated and ventilated,

One (1) piece roller deck bushing, pipe One (1) piece roller deck bushing, pipe with three point harness, headrest and

positioner roller, deck wrench, cross over positioner inserts, sliding deck wrench, upgraded suspension

subs, pipe wiper seal, drill tool lubricator cross over hammer adapter, pipe wiper seal • View hatch
• Rotary 193 mm (7.625 in) pipe diameter – • Rotary 193 mm (7.625 in) pipe diameter – • Hydraulically operated viewing hatch
One (1) piece roller deck bushing, pipe One (1) piece roller deck bushing, pipe in drill deck with spotlight
positioner roller, deck wrench, cross over positioner inserts, sliding deck wrench,
• Cab glass
subs, pipe wiper seal, drill tool lubricator cross over hammer adapter, pipe wiper seal
– Dual pane glass
• DTH 139 mm (5.5 in) pipe diameter – • DTH 139 mm (5.5 in) pipe diameter –
Two (2) piece bushing, pipe positioner Two (2) piece bushing, pipe positioner – Laminated single pane glass
inserts, sliding deck wrench, cross over inserts, sliding deck wrench, cross over • Decals/Films
adapter for hammer, pipe wiper seal adapter for hammer, pipe wiper seal – ANSI
• DTH 165 mm (6.5 in) pipe diameter – • DTH 165 mm (6.5 in) pipe diameter – – ISO
Two (2) piece bushing, pipe positioner Two (2) piece bushing, pipe positioner
inserts, sliding deck wrench, cross over inserts, sliding deck wrench, cross over SERVICE PACKAGES
adapter for hammer, pipe wiper seal adapter for hammer, pipe wiper seal • Basic – Centralized manual lubrication for
all pivot points, gravity fill fuel and water
• Standard – Fast fill for fuel and water,
automated lubrication system
• Premium – Service center for lubricants
drain and fill, fast fill fuel and water,
automated lubrication system,
blowdown hose

MD6250 Configuration Choices

Mandatory Choices (continued)

Mandatory choices may vary. Consult your Cat dealer for details.

DUST CONTROL BATTERIES REGULATORY COMPLIANCE

• Water injection system • Four (4) Cat sealed batteries • CE compliant
– 1271 L (336 gal) mounted below front deck • Six (6) Cat sealed batteries – required for • EAEU certifiable
• Water injection plus dry dust collector cold weather level 2 and 4 and/or autonomy • CSA certifiable
– 127 m3/min (4,500 cfm) dust collector packages • MDG15 and MDG41 aligned
– Water storage 1271 L (336 gal)
– 6 L/min (1.5 gpm) consumption rate CLIMATE TECHNOLOGY AND AUTOMATION
• High volume water injection • Climate Level 1 • Drill depth indicator and interlocks
– Water storage 2786 L (736 gallon) – –1° C (30° F) • Drill Assist (auto level, auto retract, auto
– 1514 L (400 gal) tank mounted below deck – Withstands high heat to 52° C (125° F) mast, single pass auto drill)
– 1271 L (336 gal) mounted above deck – Standard fluids and lubricants • Product Link Elite (see selection
– 6 L/min (1.5 gpm) consumption rate • Climate Level 2 choices below)
– –18° C (–0° F)
– Arctic fluids
– Requires two additional batteries
• Climate Level 4
– –40° C (–40°F)
– Engine coolant and water tank heater,

battery trays and provision for fuel

heating – diesel fired

– 50 Hz high pressure compressor,

Tier 4 engine

– Arctic fluids, Genset ready, heaters and

blankets for tanks, extra batteries, heated
water suction lines, drill pipe thread
grease bucket
– Shore power connection box supports

switchable 240-600 volt, 50 amp

waterproof connection

10

 MD6250 Factory Options

Factory Options

Options may vary. Consult your Cat dealer for details.

FRAME OPERATOR ENVIRONMENT DRILL PIPE

• Fuel tank expansion of +1609 L (425 gal) • Fold up trainer’s seat with seat belt • 7.6 m (20 ft) pipes 13.6 m (44.6 ft) Mast –
for total of 3218 L (850 gal) (option) • Manometer pressure gauge Requires quantity of four (4)
required for autonomy packages • Window guard – Rotary 127 mm (5 in)
• Fire suppression ready (includes platform • Window shades – Rotary 152 mm (6 in)
on non-drill end to mount bottles, and – Rotary 178 mm (7 in)
frame around power train to mount nozzles) TECHNOLOGY PRODUCTS – Rotary 193 mm (7.625 in)
• Product Link Elite; satellite, cellular or dual – DTH 139 mm (5.5 in)
MAST
– DTH 165 mm (6.5 in)
• Overhead winch with remote; variable DUST SUPPRESSION • 10.6 m (35 ft) pipes 11.2 m (36.7 ft) Mast –
speed drive with ≥ 1818 kg (4,000 lb) rating,
• Dust curtain hydraulic lifters raise front Requires quantity of four (4)
length to reach 6 m (20 ft) past drill deck
and rear dust curtains (recommended with – Rotary 127 mm (5 in)
(option)
dust collector) – Rotary 152 mm (6 in)
• Tool oiler, 113 L (30 gal) oil injection
• Tram off spray system – Rotary 178 mm (7 in)
system for Rotary Drilling
– Rotary 193 mm (7.625 in)
SERVICE TOOLS – DTH 139 mm (5.5 in)
• Bushing retention tool – 89 to 152 mm – DTH 165 mm (6.5 in)
(3.5 to 6.0 in) pipe diameter
• Lifting bails (available on request; required
for commissioning)
• API thread 89 mm (3.5 in)
• API thread 114 mm (4.5 in)
• API thread 140 mm (5.5 in)
• BECO thread 101 mm (4 in) for 140 mm
(5.5 in) pipe
• BECO thread 114 mm (4.5 in) for 152 mm
(6.0 in), 165 mm (6.5 in), 178 mm (7.0 in) pipe

11

MD6250 Rotary Blasthole Drill

For more complete information on Cat products, dealer services, and industry solutions, visit us on the web AEHQ7996-02 (05-2017)

at www.cat.com Replaces AEHQ7996-01

© 2017 Caterpillar
All rights reserved

Materials and specifications are subject to change without notice. Featured machines in photos may include
additional equipment. See your Cat dealer for available options.

CAT, CATERPILLAR, SAFETY.CAT.COM, their respective logos, “Caterpillar Yellow” and the “Power Edge”
trade dress, as well as corporate and product identity used herein, are trademarks of Caterpillar and may
not be used without permission.