Scribd
Upload
126 views4 pages

Fokker E.111 Manual Revised Edition

The document provides assembly instructions for a scale model of the Fokker E.111 fighter aircraft from World War I. It includes diagrams and instructions for assembling parts like the engine, machine gun, horizontal tail, wing wiring, cowling, and landing gear. Specifications for the scale model are also given, such as a wingspan of 1520mm and suggested equipment like a 2820-3520KV motor and 10-13 inch propeller.

Uploaded by

bifemx3639
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
126 views4 pages

Fokker E.111 Manual Revised Edition

The document provides assembly instructions for a scale model of the Fokker E.111 fighter aircraft from World War I. It includes diagrams and instructions for assembling parts like the engine, machine gun, horizontal tail, wing wiring, cowling, and landing gear. Specifications for the scale model are also given, such as a wingspan of 1520mm and suggested equipment like a 2820-3520KV motor and 10-13 inch propeller.

Uploaded by

bifemx3639
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

Fokker E.

111 Fighter Aircraft


BALSAWOOD AIRPLANE INSTRUCTION MANUAL
The Fokker E.111 was the main variant of the Eindecker (monoplane) fighter
aircraft of World War I
14*10 balsa bar

Assembly of the scale engine and machine gun Accessories Assembly Diagram
Insert the 4mm carbon tube in the middle of the 2•1omm carbon sheet,
and lock the Q? arm on the

Assembly finished
Fokker E.111 Fighter Aircraft Assembly diagram of upper bracket
and landing gear
Installation diagram of the horizontal tail and servo pushrod fitting

Connect the servo and tail with wiring


use the 0.3mm steel wire as wiring
Assembly diagram of the cowling and scale parts

Assembly diagram of wing wiring


Use the 0.8mm steel wire as wiring
The wiring starts from 1,then insert into hole 2 and pull directly to 3,
there are 2 wires respectively at the leading and trailing edge. Pis note
the wiring of the left and right wing are same way.
C.G ..100mm
Position of C.G.

Specification
Fuselage Length: 1170mm
Wingspan: 1520mm
Flying weight: 2.7-3.0kg

Suggested Equipment:
Motor:2820-3520KV 1000-600KV
Prop :10 -13 inch
ESC:40-60A
Servo:37g*2 17g*2
Battery:3S-4S 2200-4000mAh
Radio�5CH

You might also like