Scribd
Upload
2K views

Crane Wheel Load Data

This document provides wheel load data for a crane, including: 1) Vertical wheel loads show maximum static and dynamic loads ranging from 17.1-82.9 kN for the 4 wheels. 2) Horizontal wheel loads include a maximum wheel load of 291.6 kN along the crane runway. It also lists a buffer force of 19 kN for the end stop. 3) Inertia and guiding forces acting on the crane structure during acceleration/deceleration are provided, ranging from 0-kN. However, inertia and guiding forces do not act simultaneously.

Uploaded by

Joe Nadakkalan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
2K views

Crane Wheel Load Data

This document provides wheel load data for a crane, including: 1) Vertical wheel loads show maximum static and dynamic loads ranging from 17.1-82.9 kN for the 4 wheels. 2) Horizontal wheel loads include a maximum wheel load of 291.6 kN along the crane runway. It also lists a buffer force of 19 kN for the end stop. 3) Inertia and guiding forces acting on the crane structure during acceleration/deceleration are provided, ranging from 0-kN. However, inertia and guiding forces do not act simultaneously.

Uploaded by

Joe Nadakkalan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

VERLINDE S.A.S.

CRANE WHEEL LOAD DATA


WHE EL LOA D S A R E BAS E D O N P R O P O S E D GIRDER
(A ND SERVI C E P L AT F O RM ) WEIGH T

1 Wheel load drawing

2 Crane information
Crane type VTSFG12t x 10m Hol:7m Buffer type 2 x PUR80*80
Span (Spa) 11.000 m Wheel base (Wb) 4 000 mm
Load (SWL) 12 000 kg Crane rail in calculation FL50*30
Crane group FEM A3 Wheel groove 64 mm
Crane speed 32/8 m/min
Crane weight 6 240 kg Crane travel limit switch 2-step

3 Hoist information
Hoist Hoist type Hoist group Hoisting speed
Hoist 1 Main VT306115N10EFP5 ISO M5 3.2/0.53 m/min
Hoist 1 Aux

4 Vertical wheel loads


Wheel NR1 NR2 NR3 NR4
Rmax Stc 71.5 kN 72.3 kN - -
Rmin Stc - - 17.1 kN 17.8 kN
Rmax Dyn 82.0 kN 82.9 kN - -
Rmin Dyn - - 19.0 kN 19.8 kN

5 Horizontal wheel loads (according to DIN 4132 + 15018 and FEM)


5.1 Inertia forces (from driving mechanisms) HM1 = kN HM2 = kN
5.2 Max. Wheel loads along each crane runway Kr = 291.6 kN
5.3 Buffer force for dimensioning the crane runway end stop Bf = 19 kN
5.4 Forces coming from skewing
5.4.1 Guiding (contact) force (S= HS2 + HS4) S = kN
5.4.2 Friction forces due to oblique travel HS2 = kN HS4 = kN

Note! The inertia forces are acting on the crane structure only during acceleration and deceleration of the crane
movement. Inertia forces and guiding forces do not act simultaneously. Guiding force S can also locate in wheel NR4.

You might also like