Scribd
Upload
79 views

B. The Aahistclienttrend Control Is Loaded Into The Page and Is Ready For Use (The Following Figure

The document provides instructions on publishing static and dynamic trend reports from ActiveFactory to Information Server. It describes how to publish a pre-configured static trend report and view it on the Information Server. It then provides steps to create a dynamic trend in ActiveFactory using tags from the training process, publish it as an on-demand report, and view the interactive trend in the Information Server.

Uploaded by

RAHAL
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
79 views

B. The Aahistclienttrend Control Is Loaded Into The Page and Is Ready For Use (The Following Figure

The document provides instructions on publishing static and dynamic trend reports from ActiveFactory to Information Server. It describes how to publish a pre-configured static trend report and view it on the Information Server. It then provides steps to create a dynamic trend in ActiveFactory using tags from the training process, publish it as an on-demand report, and view the interactive trend in the Information Server.

Uploaded by

RAHAL
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 10

Section 2 – Reports 14-15

b. The aaHistClientTrend control is loaded into the page and is ready for use (the following figure
shows a pre-configured trend):

The Trend Page is a built-in report that will open the aaHistClientTrend ActiveX control. If you
do not have the aaHistClientTrend ActiveX control installed you will be prompted to download
it.
The aaHistClientTrend ActiveX control will only prompt for download if the Reporting Website
detects:
z The browser supports downloading/running ActiveX controls; and
z The browser can connect to the Historian directly (needed for aaHistClientTrend).
If the browser cannot connect directly to the Historian, the Reporting Website will automatically
create an image of the trend window as an html page (with embedded graphic).
This happens for published trends but not the for the Trend Page which is for ad hoc trending.

Wonderware System Platform Course - Part 2


14-16 Module 14 – ActiveFactory Reporting

Query
a. Select the Query link in the ActiveFactory / Reports folder.

The Query Page allows aaHistClientQuery to be used on an ad hoc basis.

If the aaHistClientQuery ActiveX control is not installed, the Reporting Website will prompt for
it to be downloaded.
This will only happen if the Reporting Website detects that the browser can connect directly to
the Historian.

Wonderware Training
Lab 25 – Publishing Trend Reports 14-17

Lab 25 – Publishing Trend Reports


Introduction
In this lab, we will publish Static and Dynamic Trend reports from the ActiveFactory application and
view them in Information Server.

Objective
Upon completion of this lab you will be able to:
z Publish and view a Static Trend Report
z Publish and view a Dynamic Trend Report

Wonderware System Platform Course - Part 2


14-18 Module 14 – ActiveFactory Reporting

Publish a Static Trend Report


1. Open ActiveFactory Trend.
2. Click File / Open from the menubar and browse to the Mixer.aaTrend trend that you created
in Module 4 - Lab 5, “Configure Public Groups and Trend Sets”, located in C:\Wonderware
Training\Labs.
The Mixer.aaTrend window opens. Trend data should be displayed on the graph.
3. Select File / Publish / Static Trend from the main Trend toolbar.

Wonderware Training
Lab 25 – Publishing Trend Reports 14-19

The Publish… dialog box appears.


4. Verify that Server and Report Site point to your local Historian and your local Information
Server respectively.

5. Click the OK button.


The ActiveFactoryWebsite notifies the user of the publishing status:

6. Click the Done button.

Wonderware System Platform Course - Part 2


14-20 Module 14 – ActiveFactory Reporting

Viewing Published Static Trend


7. Connect to Information Server using Microsoft Internet Explorer.
8. Expand the ActiveFactory menu.
9. Expand Reports.
10. Expand Published Reports.
11. Expand Static Reports.
12. Click on Mixer.
Mixer is the static report that you published in the previous steps.

Wonderware Training
Lab 25 – Publishing Trend Reports 14-21

Static trend data for the Mixer is now displayed in the Information Server.

Create and Publish a Dynamic Trend Report


13. Switch to ActiveFactory Trend.
14. Create a new trend.
Double-click on the following tag names in the Tags pane to add them to the trend.
z LIT_001.PV
z InletValve_001.PV
z TransferPump_001.SpeedAvg
15. Configure the time range to display the last 30 minutes.

START TIME MOST RECENT # MINUTES CURRENT TIME

16. Click the Stack Tag Traces icon to change the display to a Stacked format.

Wonderware System Platform Course - Part 2


14-22 Module 14 – ActiveFactory Reporting

The new trend should look like the following figure:

17. Save the new trend as DynamicMixer.aaTrend in the C:\Wonderware Training\Labs folder.
18. Publish the new trend by selecting File / Publish / Dynamic Trend from the Trend menubar.
The Publish Report dialog box appears.

Wonderware Training
Lab 25 – Publishing Trend Reports 14-23

19. Verify that Server and Report Site point to your local Historian and your local Information
Server respectively.
20. Confirm that On demand is selected for the Report type.
21. Check all the boxes in the Lock down options area of this dialog box.

22. Click OK.


A confirmation dialog box appears indicating that the dynamic Trend report was successfully
published.

23. Click the Done button.


24. Return to Information Server.
25. Expand ActiveFactory in the left navigation tree.
26. Expand Reports.
27. Expand Published Reports.
28. Expand On Demand Reports.

Wonderware System Platform Course - Part 2


14-24 Module 14 – ActiveFactory Reporting

29. Click DynamicMixer to generate the dynamic trend report.

The trend appears:

All the functionality that you specified through the check boxes when you published this
dynamic report from ActiveFactory Trend is available in the Information Server.
30. Modify a few parameters in the Trend to verify it is fully functional.

Wonderware Training

You might also like