Scribd
Upload
87 views

Pd2458 - RF POwer Splitter

This document provides specifications for a 2-way power divider/combiner for frequencies between 2.4-6.0 GHz. It lists both electrical and mechanical specifications. Electrically, it has a maximum insertion loss of 0.6 dB, amplitude and phase balance below 0.3 dB and 3 degrees respectively. It can handle input power of up to 30W when ports are matched and signals are in phase. Mechanically, it uses N-type connectors with brass and phosphor bronze pins, housed in an aluminum casing rated for temperatures from -65 to 85 degrees Celsius.

Uploaded by

Ian Jared
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
87 views

Pd2458 - RF POwer Splitter

This document provides specifications for a 2-way power divider/combiner for frequencies between 2.4-6.0 GHz. It lists both electrical and mechanical specifications. Electrically, it has a maximum insertion loss of 0.6 dB, amplitude and phase balance below 0.3 dB and 3 degrees respectively. It can handle input power of up to 30W when ports are matched and signals are in phase. Mechanically, it uses N-type connectors with brass and phosphor bronze pins, housed in an aluminum casing rated for temperatures from -65 to 85 degrees Celsius.

Uploaded by

Ian Jared
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

ELECTRICAL SPECIFICATIONS: MECHANICAL SPECIFICATIONS:

1.) FREQUENCY RANGE: 2400 - 6000 MHz 1.) CONNECTORS: TYPE-N FEMALE (JACK), 50 OHM
2.) IMPEDANCE: 50 OHMS 2.) CONNECTOR BODY: BRASS, TRI-ALLOY PLATE
3.) INSERTION LOSS (MAX): 0.6 dB (ABOVE 3.01 dB SPLIT) 3.) CONNECTOR PIN: PHOSPHOR BRONZE, GOLD PLATE
4.) AMPLITUDE BALANCE (MAX): 0.3 dB 4.) INSULATOR: PTFE, VIRGIN ELECTRICAL GRADE
5.) PHASE BALANCE (MAX): 3 DEGREES 5.) HOUSING: ALUMINUM, CLEAR CHEM FILM
6.) ISOLATION (MIN): 20 dB 6.) SOLDER: LEAD FREE, RoHS COMPLIANT
7.) INPUT VSWR (MAX): 1.35 : 1 7.) PROTECTION RATING: IP67 WATER AND WEATHER RESISTANT
8.) OUTPUT VSWR (MAX): 1.30 : 1 8.) OPERATING TEMP: -65°C TO +85°C
9.) WEIGHT: 188 GRAMS

RF INPUT POWER RATING (POWER DIVIDER SPLITTER): RF INPUT POWER RATING (POWER COMBINER):
INTO MATCHED LOAD VSWR's IN-PHASE 180° OUT-OF-PHASE COHERENT SIGNALS (IN-PHASE) 2 X 15 WATTS
1.2 : 1 30 WATTS 30 WATTS COHERENT SIGNALS (180° OUT-OF-PHASE) 2 X 0.375 WATTS
2.0 : 1 30 WATTS 7.5 WATTS NON-COHERENT SIGNALS 2 X 0.75 WATTS
∞ 15 WATTS 0.75 WATTS OTHER CONDITIONS - CONSULT FACTORY

1.04
N-JACK, 3X
[26.4]

.65
[16.3]

S
1.73
[43.9]

Ø.125
DIVIDER/COMBINER [Ø3.18]
.87
instockwireless.com THRU, 2X
[22.0]
1 2

.12 1.850
[2.9] [46.99]
.54 1.000
[13.7] [25.40]

.88
[22.4] .44
[11.2]

2.08
[52.8]

TOLERANCES MODEL NO.


INCHES MILLIMETERS
.00 = ±.01 .0 = ±.25
.000 = ±.004 .00 = ±.10 TITLE 2 WAY POWER DIVIDER COMBINER,
DRAWN: MJD APPROVED: EMM N-TYPE JACK, 2.4-6.0 GHz, 30W, 50 OHM,
REV DESCRIPTION BY DATE DATE: 07/24/09 DATE: 07/24/09 www.instockwireless.com IN-PHASE, RoHS, IP67 WEATHERPROOF

You might also like