Edexcel Chemistry A-level

Topic 3: Redox I
Detailed Notes

This work by PMT Education is licensed under https://bit.ly/pmt-cc

https://bit.ly/pmt-edu-cc CC BY-NC-ND 4.0

https://bit.ly/pmt-cc
https://bit.ly/pmt-edu https://bit.ly/pmt-cc
Oxidation and Reduction

Oxidation involves the loss of electrons. Reduction involves the gain of electrons.
This redox rule is remembered using the acronym ​OILRIG​ (oxidation is loss, reduction is gain).

Oxidation Number

The oxidation number gives the ​oxidation state​ of an element or ionic substance. Allocation of
oxidation number to a species follows a number of rules:

● The oxidation number of an ​element is zero​.

● Oxidation numbers in a ​neutral​ compound add up to ​zero​.
● Oxidation numbers in a charged compound add up to​ total the charge​.
● Hydrogen​ has an oxidation number of ​+1​.
● Oxygen​ has an oxidation number of​ -2​.
● Halogens​ have an oxidation number of ​-1​.
● Group I​ metals have an oxidation number of​ +1​.
● Group II​ metals have an oxidation number of​ +2​.

However, there are some ​exceptions ​to these rules:

● Oxygen ​has an oxidation number of​ -1 ​in ​peroxides.

● Hydrogen ​has an oxidation number of ​-1 ​in ​metal hydrides.

These rules can be used to work out the oxidation number of species or elements in a reaction
or compound.

Example:

This compound’s total oxidation number is

zero. Using the rules above, the oxidation
number of sulfur can be found:

Known oxidation numbers: Na=+1, O=-2.

2-8+x=0
-6 + x = 0
X=6

https://bit.ly/pmt-cc
https://bit.ly/pmt-edu https://bit.ly/pmt-cc
Example:

Roman numerals
Roman numerals​ can be used to give the oxidation number of an element that has a ​variable
oxidation state​, depending on the compound it’s in.

Example:

Copper​(II)​ sulphate - this tells you the oxidation number of copper is +2

Iron​(II) ​sulphate​(VI) ​- this tells you the oxidation number of iron is +2 and the oxidation number
of sulphur is +6

In the same way that oxidation numbers can be calculated from ​formulas ​of compounds, the
formula of compounds may be deduced if the oxidation numbers of the elements (given by the
rules of oxidation states ​and ​roman numerals​) and the ​overall charge​ of the compound is
known.

Oxidation state and the periodic table

Electrons are held in ​orbitals​. Elements are arranged in the periodic table by ​proton number
and also by their orbitals. These orbitals correspond with ​blocks​ on the Periodic Table. Each
element in the block has ​outer electrons in that orbital​.

https://bit.ly/pmt-cc
https://bit.ly/pmt-edu https://bit.ly/pmt-cc
Elements within the same ​block ​react in similar ways since their outermost electron is in the
same type of ​orbital​. This leads to some ​patterns ​in oxidation number in the periodic table:

● s block elements​ (groups 1 and 2 metals) generally ​lose electrons​, so are ​oxidised
and form species with ​positive oxidation numbers.
● p block non-metals ​generally ​gain electrons​, so are ​reduced ​and form species with
negative oxidation states.

Oxidising and Reducing Agents

An oxidising agent ​accepts electrons​ from the species that is being oxidised. Therefore it
gains electrons and is reduced​. This is seen as an ​increase​ in oxidation number (gets more
positive).

A reducing agent ​donates electrons​ to the species being reduced. Therefore it ​loses
electrons and is oxidised​. This is seen as a ​reduction​ in oxidation number (gets more
negative).

Redox Equations

Reactions in which oxidation and reduction occur ​simultaneously​ take place when one species
loses electrons, which are then donated and gained by the other species. These reactions are
known as ​redox​ reactions (​red​uction - ​ox​idation). Being able to work out the oxidation number
of atoms in a reaction enables you to work out if a redox reaction is a ​disproportionation
reaction too.

https://bit.ly/pmt-cc
https://bit.ly/pmt-edu https://bit.ly/pmt-cc
Disproportionation Reactions
In a ​disproportionation reaction​, a species is both oxidised ​and​ ​reduced, seen as both an
increase and a decrease in oxidation number for that species.

An example is seen when chlorine reacts with cold water to produce ​chlorate(I) ions (ClO​-​)​ and
chloride ions​. The oxidation state goes from zero (in Cl​2​) to both ​+1 (ClO​-​) and -1 (Cl​-​)​.

Half Equations
Half equations are used to show the ​separate oxidation and reduction reactions​ that occur in
a redox reaction. They must be balanced in terms of the ​species present and the charges​ of
the species on both sides of the equation.
In order to help write these equations, there is a useful method:

1. Balance all species excluding oxygen and hydrogen.

2. Balance oxygen using H​2​O.
3. Balance hydrogen using H​+​ ions.
4. Balance charges using e​-​ (electrons).

Following this method ensures the half equations are ​correctly balanced​.

Example:

https://bit.ly/pmt-cc
https://bit.ly/pmt-edu https://bit.ly/pmt-cc
Half equations can be ​combined​ in order to determine the ​overall redox reaction​. In order to
do this, the number of ​electrons must be the same​ for both half equations. This can be done
by scaling up the number of moles. Once the half equations are combined, the electrons should
be ​cancelled out​ on each side of the equation.

Example:

https://bit.ly/pmt-cc
https://bit.ly/pmt-edu https://bit.ly/pmt-cc