Scribd
Upload
133 views

5 - Week Tablet Compression Physics

The document discusses the physics of tablet compression and coating of tablets. It addresses topics such as transmission of forces during compression, distribution of forces in tablets, and the effect of applied pressure on the relative volume of powder. It also discusses controls and testing of tablets, including dissolution testing to ensure quality. Finally, it covers sugar coating of tablets as well as the types of cores, excipients used, and the coating process and layers.

Uploaded by

Mukesh Tiwari
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
133 views

5 - Week Tablet Compression Physics

The document discusses the physics of tablet compression and coating of tablets. It addresses topics such as transmission of forces during compression, distribution of forces in tablets, and the effect of applied pressure on the relative volume of powder. It also discusses controls and testing of tablets, including dissolution testing to ensure quality. Finally, it covers sugar coating of tablets as well as the types of cores, excipients used, and the coating process and layers.

Uploaded by

Mukesh Tiwari
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 18

PHYSICS OF TABLET COMPRESSION

Tablet compression physics includes: The main criteria for tablet


formulations are:
Transmission of forces during compression
To form tablets without sticking to
Distribution of forces in tablets the punch surfaces and to the die
wall, and capping;
The effect of applied pressure on the
relative volume of the powder To compress the tablets with
acceptable mechanical properties in
Interparticulate adhesion and cohesion terms of hardness and friability;
forces
To meet pharmacopoeia limits for
Tablet compression energies
tablet weight variation and content
Mechanical strength of tablets uniformity;

Detailed description of the tools used in To provide appropriate


these studies and working methods. disintegration time and dissolution
rate for the tablets.

1
Manual hydroulic
presses (simulator)

2
Typical pressure-time profile observed according to the stages
involved in tableting process

Ejection force

3
HD: Due to powder LD: Related to the
and die friction force transmission

Compression of layers
with or without colored

A: Lubr.

B: Unlubr.

4
filling-compression-compaction-decompression-ejection

relative volume change of


the powder vs. pressure

5
Heckel equation

6
Tablet compression energies

𝑋𝐹=𝑚𝑎𝑥

𝐴= න 𝐹. 𝑑𝑥
𝑋𝐹=0

7
TABLET TESTING
• Controls of the starting materials

In-process and intermediate product controls at


various stages of manufacturing
Finished product controls
 Bulk density • Organoleptic controls
 Flow properties
 Moisture content • Thickness – diameter
 Drug content
• Uniformity of dosage units
• Finished product controls • Content uniformity
• Stability • Weight variation

• Mass uniformity
• Decomposition products and impurities
• Hardness / tensile strength
• Friability
• Disintegration
• Dissolution
• Microbial quality

8
In vitro dissolution tests for immediate release solid oral
dosage forms are used:
(1) to assess the lot-to-lot quality of a drug product;
(2) to assess the stability of the drug product;
(3) to ensure continuing product quality and performance after certain
changes, such as changes in the formulation, the manufacturing
process, the site of manufacture, and the scale-up of the
manufacturing process; and
(4) to develop new formulations. In formulation development,
dissolution testing can aid in the selection of excipients, help
optimize the manufacturing process, and enable formulation of the
test product to match the release of the reference product.

9
(EP 6.0 V1, Subdivision of tablets, ease of intake or posology –
uniformity of mass)

IMPORTANT...
Products that are not intended to be split, e.g. enteric coated tablets,
tablets which are film coated to maintain stability and some modified
release preparations, should not be split. However, those modified
release preparations using matrix technology or using compressed
film coated components could be split.
10
COATING OF TABLETS:
Sugar coating - dragees
Film coated tablets
Formulations
Manufacturing processes

11
Why are the coated dosage forms preferred?

• Increased aesthetic quality,


• Increasing patient compliance,
• Masking of unpleasant taste and smell of drugs,
• Easily ingested by the patient,
• Increasing the physical and chemical stability of the drug,
• Modification of release kinetics of the drug from the
dosage form,
• Providing enteric release properties for release in the
intestinal tract,
• Preventing drug products from being mixed regarding the
manufacturer, facilitating coding,
• Protection of the drug from the stomach and the stomach
from the drug.

12
The types of cores (substrate) for coating

 Crystals
 Different types of granules
 Pellets
 Tablets Properties
 Soft and hard gelatin capsules  Form/shape and size
 Mechanicel strength and
friability
 Formulation
 Sensitivity to heat and
moisture
 Interactions with coating
13
There are some drawbacks of sugar coating.
 Due to the increase in diameter and weight (about 2 times or
30-100 % increase), packaging and transfer-handling fees have
increased.
 There is a possibility of damage due to the fragility of the
coating.
 Specialized personnel for coating process are required to
achieve high aesthetic quality.
 There is a polishing process that makes coding difficult to
print.
 There is a complex application which makes the transition to
automation difficult: Various operations and functions are
used.

14
Excipients used in the formulations of sugar coating
• Sugars:
Saccharose
Crystallization

Preparations of
sugar solutions
Inversion
Glocose

Lactose

Invert sugar

Starch sugars

Sugar alcohols
Xylitol
Maltitol
Mannitol
Sorbitol
15
Other excipients used in the sugar coating formulation

Coating agents:
Gum acacia, agar-agar, carboxymethyl starch, cellulose ethers, dextrins, gelatin,
PVA, PVP, sodium alginate

Fillers: Calcium carbonate, talc, titanium dioxide, calcium sulfate, calcium hydrogen
phosphate, calcium lactate

Coloring agents:
Soluble organic dyes, pigments, lakes

16
• Flavors
Fruit essences, methyl salicylate, vanilla, cocoa, chocolate, condensed
milk, caramel

• Lubricants
Talc

• Polishing agents
Waxes, oils, resins

• Suspending agents
Surfactants

17
Coating process and coating layers

Coating layers:
Priming
1. Sealing (protective coating)
coat
2. Subcoating Rounding
Uniform
3. Corrective coating (rossing/smoothing) layer
coating
4. Color coating Finishing
5. Polishing layer

Process steps applied for each layer:


Application of coating formulation
Mixing for homogeneous distribution of
formulation
Drying
18

You might also like