Scribd
Upload
265 views

How To Run VMware ESXI 7.0 On Hardware With Unsupported CPUs - Flemming's Blog

This document provides instructions for running VMware ESXi 7.0 on hardware with CPUs that are no longer officially supported, including how to bypass the boot error, permanently allow booting from a legacy CPU, and fix errors when powering on virtual machines. It describes adding "allowLegacyCPU=true" to the boot options, editing the BOOT.CFG file to persist this setting, and adding the "monitor.allowLegacyCPU" parameter when configuring VM options. While running unsupported configurations is not recommended, it may work for non-critical servers.

Uploaded by

rosslovelady
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
265 views

How To Run VMware ESXI 7.0 On Hardware With Unsupported CPUs - Flemming's Blog

This document provides instructions for running VMware ESXi 7.0 on hardware with CPUs that are no longer officially supported, including how to bypass the boot error, permanently allow booting from a legacy CPU, and fix errors when powering on virtual machines. It describes adding "allowLegacyCPU=true" to the boot options, editing the BOOT.CFG file to persist this setting, and adding the "monitor.allowLegacyCPU" parameter when configuring VM options. While running unsupported configurations is not recommended, it may work for non-critical servers.

Uploaded by

rosslovelady
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 5

How to run VMware ESXI 7.

0 on hardware
with unsupported CPUs
Flemming October 24, 2020 Other

Installation with Legacy CPU

If you try to install ESXi 7 on an hardware with older CPU(s) that is no longer officially supported by VMware, you will
get a error message similar to this when booting the installation medium:

VMB: 611:
Unsupported CPU: Intel family 0x06, model 0x1a, stepping 0x5
Intel(R) Xeon(R) CPU E5520 @ 2.27GHz
See http://www.vmware.com/resources/compatibility

Even if it is unsupported it might work in practice.


To bypass this error in the boot, do as follows:

Reboot into boot media again


After the ESXi boot menu when the “Loading ESXi Installer” is starting click SHIFT+O within 5 seconds to add boot
options.
Type “ allowLegacyCPU=true” behind the line. Like this:

<ENTER: Apply options and boot>


> cdromBoot runweasel allowLegacyCPU=true

Click ENTER and continue installation as normal.


Eventually you will come across error messages like this:

Error(s)/Warning(s) Found During System Scan

Warning(s)

<CPU_SUPPORT WARNIG: The CPU in this host is not supported by


ESXi 7.0.0. Please refer to the VMware Compatibility Guide (VCG)
for the list of supported CPUs.>

Click ENTER to continue, and finnish the installation.


After the installation medium is removed and the server is restarted the boot options have to be set every time you
restart the server.
This can be avoided, read on.

Permanently allow boot from Legacy CPU

The easiest way to accomplish automatic boot with a legacy CPU is to do as follows:

Shut down the ESXi Server and remove the boot-USB-drive.


Insert the drive in another computer. It will contain two FAT-partitions.
Open the the drive with multiple files including BOOT.CFG, and open it in a text-editor.
One of the partitions is just containing a BOOT.CFG file and nothing else. this is NOT the one you should edit.

The bottom drive in this picture is the correct one to edit BOOT.CFG on

Add “ allowLegacyCPU=true” to the end of the line starting with “kernelopt=“

bootstate=0
title=Loading VMware ESXi
timeout=5
prefix=
kernel=b.b00
kernelopt=autoPartition=FALSE allowLegacyCPU=true
modules=jumpstrt.gz --- useropts.gz --- features.gz --- k.b00 --- uc_intel.b00 ---
uc_amd.b00 --- uc_hygon.b00 --- procfs.b00 --- vmx.v00 --- vim.v00 --- tpm.v00 ---
sb.v00 --- s.v00 --- bnxtnet.v00 --- bnxtroce.v00 --- brcmfcoe.v00 --- brcmnvme.v00 -
-- elxiscsi.v00 --- elxnet.v00 --- i40en.v00 --- i40iwn.v00 --- iavmd.v00 ---
igbn.v00 --- iser.v00 --- ixgben.v00 --- lpfc.v00 --- lpnic.v00 --- lsi_mr3.v00 ---
lsi_msgp.v00 --- lsi_msgp.v01 --- lsi_msgp.v02 --- mtip32xx.v00 --- ne1000.v00 ---
nenic.v00 --- nfnic.v00 --- nhpsa.v00 --- nmlx4_co.v00 --- nmlx4_en.v00 ---
nmlx4_rd.v00 --- nmlx5_co.v00 --- nmlx5_rd.v00 --- ntg3.v00 --- nvme_pci.v00 ---
nvmerdma.v00 --- nvmxnet3.v00 --- nvmxnet3.v01 --- pvscsi.v00 --- qcnic.v00 ---
qedentv.v00 --- qedrntv.v00 --- qfle3.v00 --- qfle3f.v00 --- qfle3i.v00 --- qflge.v00
--- rste.v00 --- sfvmk.v00 --- smartpqi.v00 --- vmkata.v00 --- vmkfcoe.v00 ---
vmkusb.v00 --- vmw_ahci.v00 --- crx.v00 --- elx_esx_.v00 --- btldr.v00 ---
esx_dvfi.v00 --- esx_ui.v00 --- esxupdt.v00 --- tpmesxup.v00 --- weaselin.v00 ---
loadesx.v00 --- lsuv2_hp.v00 --- lsuv2_in.v00 --- lsuv2_ls.v00 --- lsuv2_nv.v00 ---
lsuv2_oe.v00 --- lsuv2_oe.v01 --- lsuv2_oe.v02 --- lsuv2_sm.v00 --- native_m.v00 ---
qlnative.v00 --- vdfs.v00 --- vmware_e.v00 --- vsan.v00 --- vsanheal.v00 ---
vsanmgmt.v00 --- xorg.v00 --- imgdb.tgz --- state.tgz
build=7.0.0-1.25.16324942
updated=1
Save the file and move the drive back to the server
Start the server, ESXi should now boot up without the need of any manual boot option input.

Fixing “This host does not support virtualizing real mode” error

Now when VMware ESXi 7.0 is up and running and all looks good you still might run into problems, not unlikely this one
(when trying to start a VM):

Failed to power on virtual machine Home-Assistant. This host does not support
virtualizing real mode. The Intel "VMX Unrestricted Guest" feature is necessary to
run this virtual machine on an Intel processor. Click here for more details.

Power On VM
Key
haTask-2-vim.VirtualMachine.powerOn-3629474806
Description
Power On this virtual machine
Virtual machine:

Home-Assistant
State
Failed - This host does not support virtualizing real mode. The Intel "VMX
Unrestricted Guest" feature is necessary to run this virtual machine on an Intel
processor.

Errors
- This host does not support virtualizing real mode. The Intel "VMX Unrestricted
Guest" feature is necessary to run this virtual machine on an Intel processor.
- Module 'CPUIDEarly' power on failed.
- Failed to start the virtual machine.

This issue has to be solved for every current and future VM, but the process is easy and fast when you know how.

Click “Edit” on the VM


Select “VM Options”
Open “Advanced” and select “Edit Configuration…”
Click “Add parameter” and fill as follows:
Key: monitor.allowLegacyCPU
Value: true
Click “OK” and “Save”
The VM should now work, but be patient. It can take a very long time to boot.
I hope this is to good use. Running unsupported is however not recommended, but for uncritical servers why not.

Sources:

https://www.youtube.com/watch?v=RbHGeN-T-dg
https://www.virtuallyghetto.com/2020/04/quick-tip-allow-unsupported-cpus-when-upgrading-to-esxi-7-0.html
https://planetvm.net/blog/?p=3253
https://www.enterpriseinfosec.net/install-vmware-esxi-7-on-a-r710-with-an-intel-55xx-cpu/

You might also like