Scribd
Upload
362 views

RAM Connection Input With Comments

This document provides details for a steel beam to column connection design identified as MEP BCF DG16 Extended both ways. The connection uses a moment end plate extended on both sides with bolted connections. Key dimensions specified include a 30mm thick plate extended 971.6mm long by 370mm wide with M36 bolts in specified configurations. Transverse stiffeners and column web stiffeners are also defined.

Uploaded by

Ahmed Saeed Ooka
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
362 views

RAM Connection Input With Comments

This document provides details for a steel beam to column connection design identified as MEP BCF DG16 Extended both ways. The connection uses a moment end plate extended on both sides with bolted connections. Key dimensions specified include a 30mm thick plate extended 971.6mm long by 370mm wide with M36 bolts in specified configurations. Transverse stiffeners and column web stiffeners are also defined.

Uploaded by

Ahmed Saeed Ooka
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 6

Enppi

Current Date: 12/27/2020 9:50 PM


Units system: SI
File name: C:\Users\40350\Desktop\M181-01.rcnx

Steel connections
Data
__________________________________________________________________________________________________________________________

__________________________________________________________________________________

Connection name : MEP BCF DG16 Extended both ways


Connection ID : 1
__________________________________________________________________________________

Family: Beam - Column flange (BCF)


Type: Moment end plate
Description: 6366

GENERAL INFORMATION
Connector
As per detail in calculation report,
input data in RAM shall be updated
to as follows to get accurate and
correct results:
Lev=60mm
Leh=100mm
Pfo=60mm
Pfi=103-18=85mm
s=130mm
600
g=170mm
Hd=356mm
HL=616.6mm

MEMBERS
Configuration
Exists opposite connection : No
Beam
General
Beam type : Haunched member
Beam section : W 14X90
Beam material : A572 Gr50
Vertical angle (deg) : 0
Include beam stiffener : No
Beam haunch
Section : W 14X90
Hd: Initial height : 356 mm
HL: Length : 0.585 m
Check compression at flange : Yes
Column
General
Support section : W 24X104
Support material : A572 Gr50
Column end : No

Page1
MOMENT END PLATE
Connector
Plate extension : Extended both ways
B: Width : 370 mm
L: Length : 971.6 mm
tp: Plate thickness : 30 mm
Plate material : A36
Fy : 0.248 kN/mm2
Fu : 0.4 kN/mm2
Hole type on plate : Standard (STD)
Beam side
Top flange weld type : Full penetration
D1: Weld size to top beam flange (1/16in) : 20
Bottom flange weld type : Full penetration
D3: Weld size to bottom beam flange (1/16in) : 20
Welding electrode to beam web : E70XX
D2: Weld size to beam web (1/16in) : 20
Haunch flange weld type : Full penetration
Haunch to beam weld : E70XX
D5: Haunch to beam weld size (1/16in) : 20
Support side

Bolts : M_36 G8_8


Hole type on support : Standard (STD)
g: Gage - transverse center-to-center spacing : 170 mm
Lev: Vertical edge distance : 65 mm
Leh: Horizontal edge distance : 100 mm
Bolt group (top extension)
pfo t: Distance from bolt rows to flange : 65 mm
Bolt group (top flange)
Bolts rows number : 2
pfi t: Distance from bolt rows to flange : 103 mm
s t: Vertical spacing between inner bolt rows : 130 mm
Bolt group (internal haunch)
Bolts rows number : 2
pfi h: Distance from bolt rows to flange : 103 mm
s h: Vertical spacing between inner bolt rows : 130 mm
Bolt group (extension haunch)
pfo h: Distance from bolt rows to flange : 65 mm

Page2
STIFFENERS
Transverse stiffeners

Section : PL 15x127x574.04
Position : Both
Full depth : Yes
bs: Transverse stiffeners width : 127 mm
cc: Corner clip length : 30 mm
cc: Corner clip width : 30 mm
ts: Transverse stiffener thickness : 15 mm
Material : A36
Weld type : Fillet
Welding electrode to support : E70XX
D: Weld size to support (1/16 in) : 14
Column web panel zone stiffeners

Section : PL 8x548.64x771.4
Stiffener type : Doubler plate
Position : One side
Flush : No
Width : 548.64 mm
Length : 771.403 mm
ts: Stiffener thickness : 8 mm
Material : A36
Weld type to column flange : Fillet
Welding electrode to support : E70XX
D: Weld size to support (1/16 in) : 8

Page3
0.617m

25mm is enough
6

6
Use M30 A325M
bolts as per
ASTM spec

60mm

60mm

85mm

85mm
60mm

85mm

85mm

60mm

125mm

10mm

10mm

You might also like