MCQ For Acoustics Glass Architecture
MCQ For Acoustics Glass Architecture
1. For a sound vibration to be audible to human beings the frequency must be from
a. 10 to 10,000 Hertz
b. 20 to 20,000 Hz
c. 100 to 10,000 Hz
d. 20 to 10,000 Hz
a.. Mass
b. stiffness
c. damping characteristics
a. Every glass pane thickness has a weak frequency for which that thickness of glass is less 'noise
absorbent' than for the others.
b. Every glass pane thickness has a weak frequency for which that thickness of glass is
maximum 'noise absorbent' than for the others.
c. Every glass pane thickness has a weak frequency for which that thickness of glass is maximum
'noise absorbent' than for the others.
d. . Every glass pane thickness has a weak frequency for which that thickness of glass is not
'noise absorbent'
a. Hertz (Hz).
b. decibels (dB)
c. metre/sec
d. Pascals
8. When sound travels through air, the atmospheric pressure varies periodically
b. The number of pressure variations per second is called the frequency of sound
c. it is measured in Hertz (Hz) which is defined as the number of cycles per second.
b. the audible sound has a frequency of between 200 Hz and 20,000 Hz.
d. Sounds produced by drums have much higher frequencies than those produced by a whistle.
a Thin glass tends to provide greater sound reduction even though it may actually transmit more
sound at some specific frequencies
c. The sound transmission loss for a single glass pane, measured over a range of frequencies,
varies depending on glass thickness
d. Noise - what we want to avoid inside our buildings - is the mixture of sounds of different
quality
answers 1-b,2-d,3-a,4-c,5-d,6-b,7-c,8-d,9-a,10-d