Scribd
Upload
79 views

GTP Format

The document provides the guaranteed technical particulars of suspension hardware fittings, tension hardware fittings, mid span compression joints, repair sleeves, and vibration dampers for ACSR conductors. It includes specifications such as manufacturer details, material composition, dimensions, strength properties, resistance values, temperature limits, and other technical requirements. Bidders are required to provide the specified values for all conductor types in the price schedule.

Uploaded by

Gokul Karthikeyan
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
79 views

GTP Format

The document provides the guaranteed technical particulars of suspension hardware fittings, tension hardware fittings, mid span compression joints, repair sleeves, and vibration dampers for ACSR conductors. It includes specifications such as manufacturer details, material composition, dimensions, strength properties, resistance values, temperature limits, and other technical requirements. Bidders are required to provide the specified values for all conductor types in the price schedule.

Uploaded by

Gokul Karthikeyan
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 9

Bid No. CE/TransGrid/05/2020-21 /31.12.20 Rev-0 dtd.

08/01/2021

GTP-2
GUARANTEED TECHNICAL PARTICULARS OF SUSPENSION HARDWARE FITTINGS
(Bidder to submit information for all type of Conductors appearing in Price
Schedule -2 Material and Spares)
Sl. No. Description Unit Value guaranteed by the Bidder

1 Name & address of Manufacturer

2 Address of Manufacturer

3 Drawing enclosed Yes/No


Maximum magnetic power loss of
suspension clamp at conductor /
4 sub conductor current of ---- Watt
amperes (at steady state
conductor temperature)
Slipping strength of suspension
5 assembly (clamp torque Vs slip kN
curve shall be enclosed)
Particulars of standard/AGS
Standard / AGS preformed armour
rod set for suspension assembly
a) No. of rods per set
b) Direction of lay
c) Overall length after fitting on
No
conductor
d) Actual length of each rod
Mm
along its helix
Mm
e) Diameter of each rod
6 Mm
f) Tolerance in
±mm
i.Length of each rod
±mm
ii.Diameter of each rod
±mm
iii.Difference of length
between the longest and
shortest rod in a set
Kg/mm2
g) Type of Aluminium alloy
used for manufacture of PA
rod set
h) UTS of each rod
Particulars of Elastomer (For AGS
7
Clamp only)
a) Supplier of elastomer

Page 1 of 275
GTP-2
GUARANTEED TECHNICAL PARTICULARS OF SUSPENSION HARDWARE FITTINGS
(Bidder to submit information for all type of Conductors appearing in Price
Schedule -2 Material and Spares)
b) Type of elastomer
c) Shore hardness of elastomer
d) Temperature range for which
elastomer is Designed
e) Moulded on insert Yes/No
8 UTS of suspension clamp Yes/No
9 Purity of Zinc used for galvanising %
Maximum permissible continuous
12
operating temperature of
i) Clamp body
ii) Standard/AGS preformed rods
GTP-3
GUARANTEED TECHNICAL PARTICULARS OF TENSION HARDWARE FITTINGS
(separate sheet for Single & Double Tension for each type of conductor appearing in Price
Schedule -2 Material and Spares)
Sl. Description Unit Value guaranteed by the Bidder
1 Name of Manufacturer
2 Address of Manufacturer
3 Drawing enclosed Yes / No
Purity of aluminium used for
4 %
aluminium sleeve
5 Material for steel sleeve
(i) Type of material with chemical
composition
(ii) Range of Hardness of material
BHN From …….to ……..
(Brinnel Hardness)
(iii) Weight of zinc coating gm/m2
Aluminium/ Alloy Steel
Outside diameter of sleeve before
6 mm
compression
Inside diameter of sleeve before
7 mm
compression
8 Length of sleeve before compression
Dimensions of sleeve after
9
compression
(a) Corner to Corner
(b) Surface to Surface
10 Length of sleeve after compression
11 Weight of sleeve
(a) Aluminium / Aluminium Alloy kg
(b) Steel kg
(c) Total kg
Electrical resistance of dead end
12 assembly as a percentage of equivalent %
length of Conductor
13 Slip strength of dead end assembly kN
14 UTS of dead end assembly kN
15 Purity of Zinc used for galvanising %
Design calculation of yoke plates and
16 Yes / No
sag adjustment plate enclosed.
Maximum permissible continuous
19 operating temperature of dead end
assembly
SCHEDULE -4
GUARANTEED TECHNICAL PARTICULARS OF MID SPAN COMPRESSION JOINT FOR
ACSR CONDUCTOR (separate sheet for each type of conductor appearing in Price
Schedule -2 Material and Spares)
Value guaranteed by the
Sl. Description Unit Bidder
1. Name of Manufacturer

2 Address of Manufacturer

3 Drawing enclosed Yes / No


4 Suitable for conductor size mm
Purity of aluminium used for aluminium
5 %
sleeve
6 Material for steel sleeve
(i) Type of material with chemical
composition
(ii) Range of Hardness of material (Brinnel From …….to …….
BHN
Hardness)
(iii) Weight of zinc coating gm/m2
Aluminium/alloy
Outside diameter of sleeve before
7 mm
compression
Inside diameter of sleeve before
8 mm
compression
9 Length of sleeve before compression
10 Dimensions of sleeve after compression
(a) Corner to Corner
(b) Surface to Surface
11 Length of sleeve after compression
12 Weight of sleeve
(a) Aluminium kg
(b) Steel kg
(c) Total kg
13 Slip strength kN
SCHEDULE -4
GUARANTEED TECHNICAL PARTICULARS OF MID SPAN COMPRESSION JOINT FOR
ACSR CONDUCTOR (separate sheet for each type of conductor appearing in Price
Schedule -2 Material and Spares)
Resistance of the compressed unit
14 expressed, as percentage of the resistivity of %
equivalent length of bare conductor.
Maximum permissible continuous
15 Deg. C
operating temperature of mid span
compression joint
SCHEDULE -5
GUARANTEED TECHNICAL PARTICULARS OF REPAIR SLEEVE FOR ACSR
CONDUCTOR
(separate sheet for each type of conductor appearing in Price Schedule -2 Material
and Spares)
Sl. Description Unit Particulars/ Value
1. Material
2. Dimension of Aluminum sleeve Before compression
i) Inside diameter mm
ii) Outside diameter mm
iii) Length mm
3. Dimensions of Aluminum Sleeve After compression
i) Outside dimension (Corner to corner) mm
ii) Outside dimension (face to face) mm
4. Minimum corona Extinction voltage kV
kV (rms) under dry condition
5. Maximum Radio Interference Voltage Micro
at 1 MHz for phase to earth voltage of Volts
510 kV (rms) under dry condition (V)
SCHEDULE - 6
GUARANTEED TECHNICAL PARTICULARS OF VIBRATION DAMPER FOR ACSR
CONDUCTOR (separate sheet for each type of conductor appearing in Price Schedule
-2 Material and Spares)
Value guaranteed by
Sl. Description Unit
the Bidder

1 Name of Manufacturer

2 Address of Manufacturer

3 Drawing enclosed
(a) Design Drawing YES / NO
(b) Placement Chart YES / NO
4 Suitable for conductor size
5 Total weight of one damper
Right
6 Diameter of each damper mass mm
7 Length of each damper mass mm
8 Weight of each damper mass kg
9 Material of damper masses
10 Material of clamp
11 Material of the stranded messenger cable
Number of strands in stranded messenger
12
cable
13 Lay ratio of stranded messenger cable
Minimum ultimate tensile strength of
14 Kg/mm2
stranded messenger cable
Slip strength of stranded messenger cable
15 kN
(mass pull off)
16 Resonance frequencies
(a) First frequency Hz
(b) Second frequency Hz
17 Designed clamping torque Kg-m
SCHEDULE - 6
GUARANTEED TECHNICAL PARTICULARS OF VIBRATION DAMPER FOR ACSR
CONDUCTOR (separate sheet for each type of conductor appearing in Price Schedule
-2 Material and Spares)
18 Slipping strength of damper clamp
(a) Before fatigue test kN
(b) After fatigue test kN
Magnetic power loss per vibration damper
19 watts for ---Amps, 50 Hz Alternating Current watts
[average continuous operating current]
Maximum permissible continuous operating
20 Deg. C
temperature of Vibration Damper
Percentage variation in reactance after fatigue
22 test in comparison with that. before fatigue %
test
Percentage variation in power
23 dissipation after fatigue test in %
comparison with that before fatigue test

You might also like