Scribd
Upload
43 views

Lecture 6 Dielectrics - Capacitance and Stored Energy

This lecture discusses dielectrics, capacitance, and stored energy in capacitors. It begins by defining a capacitor and describing the basic parallel plate capacitor configuration. It then provides three examples of calculating capacitance for different capacitor geometries: parallel plates, coaxial cylinders, and concentric spheres. The lecture also discusses capacitors in electric circuits, including parallel and series connections. It describes how energy is stored in capacitors by separating charge on the plates. The concept of a dielectric is introduced, including polar and non-polar dielectrics. Gauss's law is extended to dielectrics. Finally, an example problem calculates the capacitance of a parallel plate capacitor that has a dielectric slab inserted between the plates.

Uploaded by

ana carolina aristizabal
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
43 views

Lecture 6 Dielectrics - Capacitance and Stored Energy

This lecture discusses dielectrics, capacitance, and stored energy in capacitors. It begins by defining a capacitor and describing the basic parallel plate capacitor configuration. It then provides three examples of calculating capacitance for different capacitor geometries: parallel plates, coaxial cylinders, and concentric spheres. The lecture also discusses capacitors in electric circuits, including parallel and series connections. It describes how energy is stored in capacitors by separating charge on the plates. The concept of a dielectric is introduced, including polar and non-polar dielectrics. Gauss's law is extended to dielectrics. Finally, an example problem calculates the capacitance of a parallel plate capacitor that has a dielectric slab inserted between the plates.

Uploaded by

ana carolina aristizabal
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 26

Lecture 6:

Dielectrics, Capacitance
and Stored Energy

Prof. Carlos Galindez


Physics Department
Universidad del Valle
2020
Capacitance

A capacitor is a device which stores electric charge. Capacitors vary in shape


and size, but the basic configuration is two conductors carrying equal but
opposite charges
What is the E due to this configuration?

The simplest
capacitor
Example 1. Parallel-plate capacitor

To find the capacitance C, we first need to know the electric field between the
plates. A real capacitor is finite in size. Thus, the electric field lines at the edge of
the plates are not straight lines, and the field is not contained entirely between the
plates. This is known as edge effects, and the non-uniform fields near the edge are
called the fringing fields. The field lines are drawn by taking into consideration
edge effects. However, in what follows, we shall ignore such effects and assume
an idealized situation, where field lines between the plates are straight lines.

In the limit where the plates are infinitely large, the system has planar symmetry,
and we can calculate the electric field everywhere using Gauss’s law

Further calculation Examples


Example 1. Parallel-plate capacitor

Further calculation Examples


Example 2. Cylindrical capacitor
Consider next a solid cylindrical conductor of radius a surrounded by a coaxial cylindrical shell of inner radius b.
The length of both cylinders is L and we take this length to be much larger than b - a, the separation of the
cylinders, so that edge effects can be neglected. The capacitor is charged so that the inner cylinder has charge +Q
while the outer shell has a charge –Q. What is the capacitance?

Further calculation Examples


Example 2. Cylindrical capacitor
To calculate the capacitance, we first compute the electric field everywhere. Due to the
cylindrical symmetry of the system, we choose our Gaussian surface to be a coaxial
cylinder with length l<L and radius r where a < r < b. Using Gauss’s law, we have:

Notice that the electric field is non- vanishing only in the region a< r < b.

Further calculation Examples


Example 3. Spherical capacitor
As a third example, let’s consider a spherical capacitor which consists of two concentric spherical
shells of radii a and b. The inner shell has a charge +Q uniformly distributed over its surface, and
the outer shell an equal but opposite charge –Q. What is the capacitance of this configuration?

Further calculation Examples


Example 3. Spherical capacitor
The electric field is non-vanishing only in the region a < r< b.

An “isolated” conductor (with the second conductor placed at infinity) also


has a capacitance. In the limit
where b,
the former equation becomes:

Further calculation Examples


Capacitance
in electric
circuits
Parallel connection
Parallel
connection
Series connection
Series
connection

…
The amount of energy stored is equal to the work done to
Storing Energy in a charge it. During the charging process, the battery does work
Capacitor to remove charges from one plate and deposit them onto the
other

Let the capacitor be initially


uncharged. In each plate of the
capacitor, there are many negative
and positive charges, but the number
of negative charges balances the
number of positive charges, so that
there is no net charge, and therefore
no electric field between the plates.
The amount of energy stored is equal to the work done to
Storing Energy in a charge it. During the charging process, the battery does work
Capacitor to remove charges from one plate and deposit them onto the
other
Energy Density of One can think of the energy stored in the capacitor as being
stored in the electric field itself. In the case of a parallel-plate
the Electric Field capacitor, with:

Note that uE is
proportional to
the square of the
electric field.

Alternatively, one may obtain the


energy stored in the capacitor from the The total amount of work done
point of view of external work. Since externally to separate the
the plates are oppositely charged, plates by a distance d is then:
force must be applied to maintain a
constant separation between them
Dielectric

It is an insulating material or a very poor conductor of electric current. When


dielectrics are placed in an electric field, practically no current flows in them
because, unlike metals, they have no loosely bound, or free, electrons that may
drift through the material. Instead, electric polarization occurs. The positive
charges within the dielectric are displaced minutely in the direction of the
electric field, and the negative charges are displaced minutely in the direction
opposite to the electric field. This slight separation of charge, or polarization,
reduces the electric field within the dielectric.
Dielectric
1. Polar Dielectrics

2. Non-polar Dielectrics
Polarization
𝝈
𝑬𝒖𝒑 = 𝒏
𝟐𝜺𝟎 𝑬𝒅𝒐𝒘𝒏

𝑄
𝑬𝟎 𝑠̂ = 𝑛 𝜎=
𝐴

𝝈
𝑬𝒖𝒑 = − 𝒏 𝝈
𝟐𝜺𝟎
𝑬𝒅𝒐𝒘𝒏 = − 𝒏
𝟐𝜺𝟎

𝜎 𝜎 𝜎
𝐸 =𝐸 +𝐸 =− 𝑛− 𝑛=− 𝑛
2𝜀 2𝜀 𝜀

electric susceptibility

If:
The dielectric constant
𝝈
𝑬𝒅𝒐𝒘𝒏 = − 𝒏 𝑬𝒖𝒑
𝟐𝜺𝟎
Dielectric (Dielectric without battery)
Dielectric (Dielectric without battery)
Gauss’s Law for Dielectrics
Gauss’s Law for Dielectrics

Dielectric permittivity

electric displacement vector


Example: Capacitance with Dielectrics
A non-conducting slab of thickness t , area A and dielectric constant e is inserted into the space between
the plates of a parallel-plate capacitor with spacing d, charge Q and area A. The slab is not necessarily
halfway between the capacitor plates. What is the capacitance of the system?
Example: Capacitance with Dielectrics

You might also like