Exercise 1: Piping Fittings: Procedure
Exercise 1: Piping Fittings: Procedure
Piping Fittings
1
SOLIDWORKS Exercise 1
Piping Fittings
Add Fittings Edit the route above the Holding Tank and add the flange, pipe, tee
(straight tee inch configuration Tee Inch 2 Sch 40) and valve
(globe valve (asme b16.34) fl -150-2500 configuration
Globe Valve (ASME B16.34) Flanged End, Class 150, NPS 2,
RF as shown.
Interference and Check the clearance between these pipes using Clearance
Clearance Verification. Make sure that there is at least 1” of clearance.
2
Exercise 2 SOLIDWORKS
Piping on a Frame
File Configuration
Flange slip on weld flange Slip On Flange 150-NPS 2
Pipe pipe pipe 2 in, Sch 40
Elbows 90deg lr inch elbow 90L LR Inch 2 Sch40
45deg lr inch elbow 45L LR Inch 2 Sch40
Tee straight tee inch Tee Inch 2 Sch 40
Routes Create the routes shown below, using the details that follow.