Scribd
Upload
201 views5 pages

How Reinstall The Firmware

The document provides step-by-step instructions for reinstalling firmware on an EVISTR voice recorder. It explains that the user must first download the firmware and extraction tools, then run the MainApp program to select and install the correct firmware file. The user is instructed to connect the voice recorder to the computer during the firmware installation process. Successful reinstallation is indicated when the tool displays that the download is complete.

Uploaded by

khaleel
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
201 views5 pages

How Reinstall The Firmware

The document provides step-by-step instructions for reinstalling firmware on an EVISTR voice recorder. It explains that the user must first download the firmware and extraction tools, then run the MainApp program to select and install the correct firmware file. The user is instructed to connect the voice recorder to the computer during the firmware installation process. Successful reinstallation is indicated when the tool displays that the download is complete.

Uploaded by

khaleel
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 5

EVISTR Voice Recorder

www.evistr.com [email protected]

How to Re-install the Firmware of Voice Recorder

Note: this set up guide take the voice recorder L157 as example, the other model, reinstall the
firmware same steps as below shows.

1） Download the Tools and firmware, and Extract the tools (1.04.01)

2) Extract the Tool 1.04.01 file

3) Find the file MainApp.exe, double click and run it. If the computer show warnings,
we click Yes to continue

1st
EVISTR Voice Recorder
www.evistr.com [email protected]

4) And then we select the correctly firmware for your voice recorder

5) Find the Correctly Firmware, We just downloaded

2nd
EVISTR Voice Recorder
www.evistr.com [email protected]
6) Click Replace to input the Firmware

7) If we didn’t Connect the voice recorder computer it will looks like this

3rd
EVISTR Voice Recorder
www.evistr.com [email protected]

8) So we connect the voice recorder to computer

If didn’t back up the file on the


device. Do not tick this, it will erase
all file on the voice recorder

Click this, we could select a new


Firmware

9) Now, we click download to re-install the firmware

Click DOWN, start to re-install


firmware

4th
EVISTR Voice Recorder
www.evistr.com [email protected]
10) When successful, it will looks like this

Till now, we have successfully install the firmware for the voice recorder

Notice:
If the voice recorder cannot connect to computer successfully, or turn it on. We need to go to
ADFU mode.
Turn off the voice recorder, and press and hold PLAY button and the same time connect it to
computer, so the TOOL will detect the voice recorder, it will like this

5th

You might also like