Scribd
Upload
173 views10 pages

Palo Alto Basic Lab Setup

To add a Palo Alto firewall to a lab: 1. Upload the Palo Alto software folder to the /opt/unetlab/addons/qemu/ directory. 2. Run the command /opt/unetlab/wrappers/unl_wrapper -a fixpermissions to connect the firewall to the management interface. 3. Open the firewall console on VNC to view the automatically assigned IP address or assign a static IP.

Uploaded by

Ashish Sharma
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
173 views10 pages

Palo Alto Basic Lab Setup

To add a Palo Alto firewall to a lab: 1. Upload the Palo Alto software folder to the /opt/unetlab/addons/qemu/ directory. 2. Run the command /opt/unetlab/wrappers/unl_wrapper -a fixpermissions to connect the firewall to the management interface. 3. Open the firewall console on VNC to view the automatically assigned IP address or assign a static IP.

Uploaded by

Ashish Sharma
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 10

PALO ALTO BASIC LAB SETUP

➢ HOW TO ADD PA ON LAB.

/opt/unetlab/addons/qemu/

Upload this folder on above path

( JFYI inside folder software version file is 9.0.9)

/opt/unetlab/wrappers/unl_wrapper -a fixpermissions
( Here Connect PA with Mgmt Inteface and first time is DHCP so it will take automatic ip address
from your home router ) – You can also assign Static Ip address.
➢ Open firewall console on VNC to check management inteface Ip address.
( IN PA 9 version firewall ask change new password)
➢ Open PA on Any web browser with mangament ip address
➢ Follow Below Screen shot for more configuration.

You might also like