Series 90

130 cc Axial Piston

Pump

Parts Manual
 Series 90 130 cc Axial Piston Pump
Parts Manual

General Information Service parts identification.................................................................................................................. 4

Nameplate................................................................................................................................................. 4
Date code................................................................................................................................................... 5
Service bulletins...................................................................................................................................... 5
Procedure to identify a part................................................................................................................ 5
Order code................................................................................................................................................. 7

VARIABLE Common parts...................................................................................................................................8-11

displacement PUMP Special hardware............................................................................................................................ 10-35
Displacement limitation.............................................................................................................. 36-43
End cap.............................................................................................................................................. 44-59
Charging system............................................................................................................................. 60-61
Auxiliary mounting........................................................................................................................ 50-73
Charge pressure relief................................................................................................................... 72-73
Shaft.................................................................................................................................................... 74-75
Control............................................................................................................................................... 76-85
Filtration............................................................................................................................................ 86-89
High pressure protection............................................................................................................ 90-93
Orifice...............................................................................................................................................94-105
Overhaul seal kit........................................................................................................................ 106-107

© 2007 Sauer-Danfoss. All rights reserved.

Sauer-Danfoss accepts no responsibility for possible errors in catalogs, brochures and other printed material.
Sauer-Danfoss reserves the right to alter its products without prior notice. This also applies to products already
ordered provided that such alterations aren’t in conflict with agreed specifications. All trademarks in this
material are properties of their respective owners.
Front cover illustrations: P100 609, P100 681, P100 680, P100 679

 520L0895 • Rev AA • June 2007

 Series 90 130 cc Axial Piston Pump
Parts Manual
Contents

service bulletin BLN-10107 (charge pumpdesign change)....................................................................... 108-109

SB-1991-014 (multi-function valve installation torque)....................................................... 110
SB-1992-003 (pump redesign)............................................................................................. 111-113
SB-1994-025 (change pump design change)................................................................. 114-115
SB-1994-036 (intergal filtration manifold)................................................................................ 116
SB-1995-003 (MDC w/electric override manifold).................................................................. 117
SB-1995-018 (filtration tube).......................................................................................................... 118
SB-1996-004 (side cover redesign).............................................................................................. 119
SB-1997-018 (swashplate leveler spring and spring seats)................................................. 120
SB-1999-010 (swashplate leveler design change).................................................................. 121
SB-1999-041 (side cover insert material change)................................................................... 122
SB-1999-065 (HDC gasket change)..................................................................................... 123-124
SB-2000-022 (displacement limiter screw)...................................................................... 125-126
SB-2002-014 (side cover screw change).................................................................................... 127
SB-2003-002 (redesign cylinder block)...................................................................................... 128
SB-2007-008 (redesign block point change)................................................................... 129-130

520L0895 • Rev AA • June 2007 

 Series 90 130 cc Axial Piston Pump
Parts Manual
General information

Service parts The following information and procedure is used to identify the module group, item
indentification number, manufacture date, part number, and part name of the parts included in the
Series 90, 130 cc variable displacement pumps.

The parts listed include all parts which may be used when performing either “Minor
Repairs”,“Major Repairs” or “Conversions” on the Series 90, 130 cc pump.

nameplate Each unit will have a nameplate affixed to

the housing. The nameplate will include the
following information.

Model Number
The Sauer-Danfoss model number is used by
the factory in manufacturing. On repeat orders,
a complete unit can be ordered by the model
number. Neumünster/Germany
Model No./Ident No. 9721120
Model Code Model Code 90L130 EA 1 NN
The Sauer-Danfoss model code completely 80 L 3 F1 H 03
GBA 35 35 24
defines the specific unit and must be used Serial No. N-01-16-23456
when ordering parts to service this product.

Serial Number
Made in Germany
The Sauer-Danfoss serial number is used to
identify the manufacture date and the unit
sequence in the build. The serial number is also
used to identify the units warranty time period.

The letter code indicates the location of original

manufacture (assembly). “A” indicates the unit
was originally assembled in Ames, Iowa, USA.
“N” indicates the unit was originally assembled
in Neumunster, Germany.

The first number (2 digits) indicates the year of

manufacture. (“01” would indicate the unit was
manufactured in 2001)

The second number (2 digits) indicates the

calendar week of manufacture.

The third number (5 digits) is a sequential

number used to identify a specific unit.

 520L0895 • Rev AA • June 2007

 Series 90 130 cc Axial Piston Pump
Parts Manual
General information

date code The date code is defined as the year and week of manufacture. The same item number
may list more than one part number. This indicates that there is more than one
configuration for that item number. You will see that there are different date codes
for the different part numbers. Find the date code of your unit from the nameplate to
determine which service part number you need to order.

EXAMPLE: The service part desired is Item E10

Order Date Date Qty. per
Code Item Begin End Part Number Part Name Model/Kit
E10 92-19 746107 Side cover 1
E10 89-41 92-18 340133 Side cover (SB-1992-003) 1

All units using this order code with a date code of 89-41 and up to and including 92-18,
must use part number “340133”. All units with a date code of 92-19 and newer must use
part number “746107.”.

service bulletins A Service Bulletin Number (SB-_ _ _ _ - _ _ _) may follow the “Part Name” of the part you
desire. You must read that Service Bulletin prior to ordering that part. The information
contained in these Service Bulletins, as of the print date of this bulletin, are included
at the end of this manual. Service Bulletins contain more detailed information such as
interchangeability, what additional parts are involved, etc. It is suggested that you add
additional Service Bulletins to this manual as you recieve them.

procedure to identify General

a part The modular design of Series 90 units results in a simplified service parts list and part
number identification procedure.

The same item numbers are used for same part names on all units within a product type.
(Example: The lip seal - Item L40 has the same item number on all pumps.)

A part number that has another number following it in parentheses is done to make this
a world wide manual. The first number is sold in Germany. The number in parentheses
is sold in the United States. (Example: 001149 (9004201-6200), customers would order
9004201-6200 if ordering the part in the United States.)

Example of a Part Identification

The nameplate on a Series 90 pump has an Order Code of 90L130 EA 1 NN 80 L 3 F1 H 03
GBA 35 35 24. Use the following procedures to determine the part number of the drive
shaft used on this pump.

1) Referring to the input shaft module in the Order Code (see page 7), the input shaft
option for this pump is identified by the code “F1. (90L130 EA 1 NN 80 L 3 F1 H 03 GBA 35
35 24)

2) Referring to the Service Parts List, find the shaft group. Next find the order code that
relates to this unit, which is “F1”. The shaft is found to be item L100 and part number
335695.

520L0895 • Rev AA • June 2007 

 Series 90 130 cc Axial Piston Pump
Parts Manual
Notes

 520L0895 • Rev AA • June 2007

 Series 90 130 cc Axial Piston Pump
Parts Manual
Order code

series displacement
M P J G N F L H T W Y Z K
9 0 L 1 3 0 E A 1 NN 8 0 L 3 F 1 H 0 3 G B A 3 5 3 5 2 4
rotation

control

pressure regulation

auxiliary mounting pad

end cap

filtration

displacement limitation

shaft

charging system

control orifice

special hardware features

high pressure setting port a

high pressure setting port B

charge pressure setting

P100 713E

520L0895 • Rev AA • June 2007 

 Series 90 130 cc Axial Piston Pump
Parts Manual
Variable displacement pump

B80
B80A
B90
B72
B90
B72A B70
B70A
L0
B82
B82A

B10 L10

B50

E30

B50

E82
B0 E82
E80
E50
E24 E80
E24
D55
D65
f0
M14 e90

D10

D75 E10
D70

E70A E60
D85
E70 E40
D80 D01
D55
D50 D65
f0
M14

D10

D75
D95 D70 D60

D85
D80

D50 E100 879E

design prior Enlarged bold type item

to 0-10 numbers are recommended
part to stock for servicing.

 520L0895 • Rev AA • June 2007

 Series 90 130 cc Axial Piston Pump
Parts Manual
Variable displacement pump

common parts
Order Date Date Qty. per
Code Item Begin End Part Number Part Name Model/Kit
B10 07-10 11026913 Housing assembly (SB-2007-008) 1
B10 92-19 07-09 8510060 Housing assembly (SB-1992-003) 1
B30 07-10 11000866 Cradle bearing assembly (SB-2007-008) 1
B30 89-41 07-09 324657 Cradle bearing assembly 1
B50 89-41 9004800-3708 Pin 2
B70 89-41 140644 Plug assembly 1
B70A 89-41 085043 (9004201-3700) O-ring 1
B72 89-41 140644 Plug assembly 1
B72A 89-41 085043 (9004201-3700) O-ring 1
B80 89-41 320002 (9005110-9200) Plug assembly 1
B80A 89-41 001172 (9004201-9000) O-ring 1
B82 92-19 140644 Plug assembly (SB-1992-003) 1
B82A 92-19 085043 (9004201-3700) O-ring 1
B90 89-41 9803390 Control filter screen 3
D01 88-16 07-09 731026 Swashplate assembly (SB-2007-008) 1
D10 07-10 11000397 Servo arm (SB-2007-008) 1
D10 05-49 07-09 303214 Servo arm assembly 1
D50 07-10 11001678 Swashplate (SB-2007-008) 1
D50 88-16 07-09 516204 Swashplate 1
D55 07-10 519150 Screw (SB-2007-008) 1
D55 89-41 07-09 536649 (9007276-0111) Screw 1
D60 89-41 07-09 766022 Swashplate guide (SB-2007-008) 1
D65 89-41 504493 Screw 1
D70 89-41 127464 Washer 1
D75 89-41 333369 Spiral head pin 1
D80 89-41 700948 Cage locator link 1
D85 89-41 11003805 Pin (SB-2007-008) 1
D95 89-41 07-09 303420 Spring (SB-2007-008) 1
E10 07-10 11001326 Side cover (SB-2007-008) 1
E10 96-02 07-09 11027814 Side cover assembly (SB-1992-003 & SB-1996-004) 1
E24 92-19 359067 Shim 2
E30 96-03 8300012 Guide post (Sb-1996-004) 2
E30 92-19 96-02 503205 Guide post (SB-1992-003) 2
E40 89-41 042432 Seal nut 2
E50 89-41 517379 O-ring 1
E60 89-41 517230 Screw (SB-2002-014) 6
E70 89-41 320002 (9005110-9200) Plug assembly 1
E70A 89-41 001172 (9004201-9000) O-ring 1
E80 89-41 517160 Spring (SB-1997-018) 2
E82 89-41 517161 Spring (SB-1997-018) 2
E90 96-03 513890 Insert assembly (SB-1996-004 & SB-1999-041) 1
F20 88-16 11000317 Slider block 1
L10 89-41 304857 Roller bearing 1
L15 89-41 376319 Shim 1
L20 89-41 392209 Retaining ring 1

520L0895 • Rev AA • June 2007 

 Series 90 130 cc Axial Piston Pump
Parts Manual
Variable displacement pump

L60
L70

L0

L50
L25

B8
B8a

c0

c0
s0 c0

C05 C50

C70

C13 E20
C14
E22
C15
C16 E22

c80

E100 882E

Enlarged bold type item

numbers are recommended
part to stock for servicing.

10 520L0895 • Rev AA • June 2007

 Series 90 130 cc Axial Piston Pump
Parts Manual
Variable displacement pump

common parts
Order Date Date Qty. per
Code Item Begin End Part Number Part Name Model/Kit
C13 89-41 700922 Spring seat 1
C14 89-41 302828 Cylinder block spring 1
C15 89-41 700930 Spring retainer 1
C16 89-41 302836 Retaining ring 1
C20 89-41 727750 Piston assembly, welded 9
C30 89-41 735506 Slipper guide 1
C40 88-22 700963 Slipper guide bearing 2
C50 88-22 509015 Spacer 4
C70 88-22 308643 Screw 4
L25 92-19 519732 Seal carrier assembly (SB-2007-008) 1
L40 07-10 519021 Lip seal (SB-2007-008) 1
L40 89-41 07-09 9008000-0114 Lip seal 1
L50 89-41 509353 O-ring 1
L60 89-41 516769 Retainer plate 1
L70 89-41 009159 Screw 4

special hardware
EAT B83 99-50 KPPG15824 Speed sensor 1
B83A 99-50 085043 (9004201-3700) O-ring 1
C05 99-50 519259 Cylinder block assy., with speed ring (SB-2003-002) 1
C80 99-50 518807 Valve plate 1
E20 99-50 511052 Leveler (SB-1999-010 & SB-2007-008) 1
E22 99-50 8300011 Spring seat (SB-2007-008) 2
S07 99-50 519275 Cylinder block kit, with speed ring (SB-2003-002) 1

EBA B83 92-19 KPPG13408 Speed sensor 1

B83A 92-19 085043 (9004201-3700) O-ring 1
C05 92-19 519259 Cylinder block assy., with speed ring (SB-2003-002) 1
C80 92-19 518807 Valve plate 1
E20 92-19 511052 Leveler (SB-1999-010) 1
E22 92-19 8300011 Spring seat 2
S07 92-19 519275 Cylinder block kit, with speed ring (SB-2003-002) 1

EDB B83 92-19 KPPG13408 Speed sensor 1

B83A 92-19 085043 (9004201-3700) O-ring 1
C05 92-19 519259 Cylinder block assy., with speed ring (SB-2003-002) 1
C80 92-19 518807 Valve plate 1
E20 92-19 511052 Leveler (SB-1999-010) 1
E22 92-19 8300011 Spring seat 2
S07 92-19 519275 Cylinder block kit, with speed ring (SB-2003-002) 1

EDD B83 92-19 KPPG13408 Speed sensor 1

B83A 92-19 085043 (9004201-3700) O-ring 1
C05 92-19 519259 Cylinder block assy., with speed ring (SB-2003-002) 1
C80 92-19 518808 Valve plate 1
E20 92-19 511052 Leveler (SB-1999-010) 1
E22 92-19 8300011 Spring seat 2
S07 92-19 519275 Cylinder block kit, with speed ring (SB-2003-002) 1

520L0895 • Rev AA • June 2007 11

 Series 90 130 cc Axial Piston Pump
Parts Manual
Variable displacement pump

B83
B83A
B8
B8a

s0

C05

E20

E22

E22

c80

E100 885E

Enlarged bold type item

numbers are recommended
part to stock for servicing.

12 520L0895 • Rev AA • June 2007

 Series 90 130 cc Axial Piston Pump
Parts Manual
Variable displacement pump

special hardware
Order Date Date Qty. per
Code Item Begin End Part Number Part Name Model/Kit
EEB B83 92-19 140644 Plug assembly 1
B83A 92-19 085043 (9004201-3700) O-ring 1
C05 92-19 519259 Cylinder block assy., with speed ring (SB-2003-002) 1
C80 92-19 518807 Valve plate 1
E20 92-19 511052 Leveler (SB-1999-010) 1
E22 92-19 8300011 Spring seat 2
S07 92-19 519275 Cylinder block kit, with speed ring (SB-2003-002) 1

EEG B83 00-13 140644 Plug assembly 1

B83A 00-13 085043 (9004201-3700) O-ring 1
C05 00-13 519259 Cylinder block assy., with speed ring (SB-2003-002) 1
C80 00-13 518937 Valve plate, CW, lapped 1
C80 00-13 518938 Valve plate, CCW, lapped 1
E20 00-13 511052 Leveler 1
E22 00-13 8300011 Spring seat 2
S07 00-13 519275 Cylinder block kit, with speed ring (SB-2003-002) 1

EFC B83 92-19 KPPG156 Speed sensor 1

B83A 92-19 085043 (9004201-3700) O-ring 1
C05 92-19 519259 Cylinder block assy., with speed ring (SB-2003-002) 1
C80 92-19 518807 Valve plate 1
E20 92-19 511052 Leveler 1
E22 92-19 8300011 Spring seat 2
S07 92-19 519275 Cylinder block kit, with speed ring (SB-2003-002) 1

EFI B83 98-12 KPPG156 Speed sensor 1

B83A 98-12 085043 (9004201-3700) O-ring 1
C05 98-12 519259 Cylinder block assy., with speed ring (SB-2003-002) 1
C80 00-13 518937 Valve plate, CW, lapped 1
C80 00-13 518938 Valve plate, CCW, lapped 1
E20 98-12 511052 Leveler 1
E22 98-12 8300011 Spring seat 2
S07 98-12 519275 Cylinder block kit, with speed ring (SB-2003-002) 1

EFM B83 98-31 KPPG156 Speed sensor 1

B83A 98-31 085043 (9004201-3700) O-ring 1
C05 98-31 519259 Cylinder block assy., with speed ring (SB-2003-002) 1
C80 98-31 518808 Valve plate 1
E20 98-31 511052 Leveler (SB-1999-010) 1
E22 98-31 8300011 Spring seat 2
S07 98-31 519275 Cylinder block kit, with speed ring (SB-2003-002) 1

EGA B83 98-49 KPPG15824 Speed sensor 1

B83A 98-49 085043 (9004201-3700) O-ring 1
C05 98-49 519259 Cylinder block assy., with speed ring (SB-2003-002) 1
C80 98-49 518807 Valve plate 1
E20 98-49 511052 Leveler (SB-1999-010) 1
E22 98-49 8300011 Spring seat 2
S07 98-49 519275 Cylinder block kit, with speed ring (SB-2003-002) 1

520L0895 • Rev AA • June 2007 13

 Series 90 130 cc Axial Piston Pump
Parts Manual
Variable displacement pump

W3CN
W1CN
B83
W1CNA
B83A
B8
B8a

B2CN

s0

C05

E20

E22

E22

c80

E100 886E

Enlarged bold type item

numbers are recommended
part to stock for servicing.

14 520L0895 • Rev AA • June 2007

 Series 90 130 cc Axial Piston Pump
Parts Manual
Variable displacement pump

special hardware
Order Date Date Qty. per
Code Item Begin End Part Number Part Name Model/Kit
EHA B83 00-44 KPPG16408 Speed sensor 1
B83A 00-44 085043 (9004201-3700) O-ring 1
C05 00-44 519259 Cylinder block assy., with speed ring (SB-2003-002) 1
C80 00-44 518807 Valve plate 1
E20 00-44 511052 Leveler (SB-1999-010) 1
E22 00-44 8300011 Spring seat 2
S07 00-44 519275 Cylinder block kit, with speed ring (SB-2003-002) 1

EHB B83 02-47 KPPG16408 Speed sensor 1

B83A 02-47 085043 (9004201-3700) O-ring 1
C05 02-47 519259 Cylinder block assy., with speed ring (SB-2003-002) 1
C80 02-47 518808 Valve plate 1
E20 02-47 511052 Leveler (SB-1999-010) 1
E22 02-47 8300011 Spring seat 2
S07 02-47 519275 Cylinder block kit, with speed ring (SB-2003-002) 1

FAD B83 92-19 140644 Speed sensor 1

B83A 92-19 085043 (9004201-3700) O-ring 1
C05 92-19 519258 Cylinder block assy., without speed ring (SB-2003-002) 1
C80 92-19 518807 Valve plate 1
E20 92-19 511052 Leveler (SB-1999-010) 1
E22 92-19 8300011 Spring seat 2
S07 92-19 519274 Cylinder block kit, without speed ring (SB-2003-002) 1

GAA B83 92-19 140644 Speed sensor 1

B83A 92-19 085043 (9004201-3700) O-ring 1
C05 92-19 519258 Cylinder block assy., without speed ring (SB-2003-002) 1
C80 92-19 518934 Valve plate 1
E20 92-19 511052 Leveler (SB-1999-010) 1
E22 92-19 8300011 Spring seat 2
S07 92-19 519274 Cylinder block kit, without speed ring (SB-2003-002) 1

GAB B2CN 92-19 775312 Set screw 1

B83 92-19 140644 Plug assembly 1
B83A 92-19 085043 (9004201-3700) O-ring 1
C05 92-19 519258 Cylinder block assy., without speed ring (SB-2003-002) 1
C80 92-19 518934 Valve plate 1
E20 92-19 511052 (SB-1999-010) Leveler 1
E22 92-19 8300011 Spring seat 2
S07 92-19 519274 Cylinder block kit, without speed ring (SB-2003-002) 1
W1CN 92-19 723726 Connector 1
W1CNA 92-19 085043 (9004201-3700) O-ring 1
W3CN 92-19 574095 Cap 1

520L0895 • Rev AA • June 2007 15

 Series 90 130 cc Axial Piston Pump
Parts Manual
Variable displacement pump

B83
B83A

s0

E20

E22
C05
E22

G8a
c80

G86
G85
G84
G76
G
G G5
G88

G72

E100 883E

Enlarged bold type item

numbers are recommended
part to stock for servicing.

16 520L0895 • Rev AA • June 2007

 Series 90 130 cc Axial Piston Pump
Parts Manual
Variable displacement pump

special hardware
Order Date Date Qty. per
Code Item Begin End Part Number Part Name Model/Kit
GB2 B83 02-30 140644 Plug assembly 1
B83A 02-30 085043 (9004201-3700) O-ring 1
C05 02-30 519258 Cylinder block assy., without speed ring (SB-2003-002) 1
C80 02-30 518807 Valve plate 1
E20 02-30 511052 (SB-1999-010) Leveler 1
E22 02-30 8300011 Spring seat 2
G72 02-30 517831 Spring 1
G73 02-30 519873 Seal 1
G74 02-30 144725 (9004105-0110) O-ring 1
G75 02-30 518329 O-ring 1
G76 02-30 517828 Valve housing 1
G84 02-30 3103375-0250 SCR valve, 250 bar [3625 psi] 1
G85 02-30 4800780 Conial spring 1
G86 02-30 3104295 Plug assembly 1
G86A 02-30 001131 (9004201-5000) O-ring 1
G88 02-30 517829 Spring guide 1
S07 02-30 519274 Cylinder block kit, without speed ring (SB-2003-002) 1

GB3 B83 02-30 140644 Plug assembly 1

B83A 02-30 085043 (9004201-3700) O-ring 1
C05 02-30 519258 Cylinder block assy., without speed ring (SB-2003-002) 1
C80 02-30 518807 Valve plate 1
E20 02-30 511052 (SB-1999-010) Leveler 1
E22 02-30 8300011 Spring seat 2
G72 02-30 517831 Spring 1
G73 02-30 519873 Seal 1
G74 02-30 144725 (9004105-0110) O-ring 1
G75 02-30 518329 O-ring 1
G76 02-30 517828 Valve housing 1
G84 02-30 3103375-0175 SCR valve, 175 bar [2538 psi] 1
G85 02-30 4800780 Conial spring 1
G86 02-30 3104295 Plug assembly 1
G86A 02-30 001131 (9004201-5000) O-ring 1
G88 02-30 517829 Spring guide 1
S07 02-30 519274 Cylinder block kit, without speed ring (SB-2003-002) 1

520L0895 • Rev AA • June 2007 17

 Series 90 130 cc Axial Piston Pump
Parts Manual
Variable displacement pump

B83
B83A

s0

E20

E22
C05
E22

G8a
c80

G86
G85
G84
G76
G
G G5
G88

G72

E100 883E

Enlarged bold type item

numbers are recommended
part to stock for servicing.

18 520L0895 • Rev AA • June 2007

 Series 90 130 cc Axial Piston Pump
Parts Manual
Variable displacement pump

special hardware
Order Date Date Qty. per
Code Item Begin End Part Number Part Name Model/Kit
GB4 B83 92-19 140644 Plug assembly 1
B83A 92-19 085043 (9004201-3700) O-ring 1
C05 92-19 519258 Cylinder block assy., without speed ring (SB-2003-002) 1
C80 92-19 518807 Valve plate 1
E20 92-19 511052 Leveler (SB-1999-010) 1
E22 92-19 8300011 Spring seat 2
G72 92-19 517831 Spring 1
G73 92-19 519873 Seal 1
G74 92-19 144725 (9004105-0110) O-ring 1
G75 92-19 518329 O-ring 1
G76 92-19 517828 Valve housing 1
G84 92-19 3103375-0140 SCR valve, 140 bar [2030 psi] 1
G85 92-19 4800780 Conial spring 1
G86 92-19 3104295 Plug assembly 1
G86A 92-19 001131 (9004201-5000) O-ring 1
G88 92-19 517829 Spring guide 1
S07 92-19 519274 Cylinder block kit, without speed ring (SB-2003-002) 1

GB7 B83 05-34 140644 Plug assembly 1

B83A 05-34 085043 (9004201-3700) O-ring 1
C05 05-34 519258 Cylinder block assy., without speed ring (SB-2003-002) 1
C80 05-34 518938 Valve plate 1
E20 05-34 511052 Leveler (SB-1999-010) 1
E22 05-34 8300011 Spring seat 2
G72 05-34 517831 Spring 1
G73 05-34 519873 Seal 1
G74 05-34 144725 (9004105-0110) O-ring 1
G75 05-34 518329 O-ring 1
G76 05-34 517828 Valve housing 1
G84 05-34 3103375-0175 SCR valve, 175 bar [2538 psi] 1
G85 05-34 4800780 Conial spring 1
G86 05-34 3104295 Plug assembly 1
G86A 05-34 001131 (9004201-5000) O-ring 1
G88 05-34 517829 Spring guide 1
S07 05-34 519274 Cylinder block kit, without speed ring (SB-2003-002) 1

520L0895 • Rev AA • June 2007 19

 Series 90 130 cc Axial Piston Pump
Parts Manual
Variable displacement pump

B83
B83A

s0

E20

E22
C05
E22

G8a
c80

G86
G85
G84
G76
G
G G5
G88

G72

E100 883E

Enlarged bold type item

numbers are recommended
part to stock for servicing.

20 520L0895 • Rev AA • June 2007

 Series 90 130 cc Axial Piston Pump
Parts Manual
Variable displacement pump

special hardware
Order Date Date Qty. per
Code Item Begin End Part Number Part Name Model/Kit
GB9 B83 06-34 140644 Plug assembly 1
B83A 06-34 085043 (9004201-3700) O-ring 1
C05 06-34 519258 Cylinder block assy., without speed ring 1
C80 06-34 518807 Valve plate 1
E20 06-34 511052 Leveler 1
E22 06-34 8300011 Spring seat 2
G72 06-34 517831 Spring 1
G73 06-34 519873 Seal 1
G74 06-34 144725 (9004105-0110) O-ring 1
G75 06-34 518329 O-ring 1
G76 06-34 517828 Valve housing 1
G84 06-34 3103375-0140 SCR valve, 140 bar [2030 psi] 1
G85 06-34 4800780 Conial spring 1
G86 06-34 3104295 Plug assembly 1
G86A 06-34 001131 (9004201-5000) O-ring 1
G88 06-34 517829 Spring guide 1
S07 06-34 519274 Cylinder block kit, without speed ring 1

GBA B83 06-34 140644 Plug assembly 1

B83A 06-34 085043 (9004201-3700) O-ring 1
C05 89-41 519258 Cylinder block assembly, without speed ring 1
C80 89-41 518807 Valve plate 1
E20 89-41 511052 Leveler (SB-1999-010) 1
E22 89-41 8300011 Spring seat (SB-1997-018) 2
S07 89-41 519274 Cylinder block kit, without speed ring, welded piston 1

GBE B83 92-19 140644 Plug assembly 1

B83A 92-19 085043 (9004201-3700) O-ring 1
C05 89-41 519258 Cylinder block assembly, without speed ring 1
C80 89-41 518807 Valve plate 1
E20 89-41 511052 Leveler (SB-1999-010) 1
E22 89-41 8300011 Spring seat (SB-1997-018) 2
S07 89-41 519274 Cylinder block kit, without speed ring, welded piston 1

GBK B83 92-19 140644 Plug assembly 1

B83A 92-19 085043 (9004201-3700) O-ring 1
C05 92-19 519258 Cylinder block assembly, without speed ring 1
C80 92-19 518807 Valve plate 1
E20 92-19 511052 Leveler (SB-1999-010) 1
E22 92-19 8300011 Spring seat (SB-1997-018) 2
S07 92-19 519274 Cylinder block kit, without speed ring, welded piston 1

GBL B83 00-25 140644 Plug assembly 1

B83A 00-25 085043 (9004201-3700) O-ring 1
C05 00-25 519258 Cylinder block assembly, without speed ring 1
C80 00-25 518807 Valve plate 1
E20 00-25 511052 Leveler (SB-1999-010) 1
E22 00-25 8300011 Spring seat (SB-1997-018) 2
S07 00-25 519274 Cylinder block kit, without speed ring, welded piston 1

520L0895 • Rev AA • June 2007 21

 Series 90 130 cc Axial Piston Pump
Parts Manual
Variable displacement pump

Z32
Z31

Z31A

Z05
Z01
Z05A
Z01
Z01A Z07
Z05
Z31
Z03
Z03A Z03 Z07A

ZPB1 Z17
Z17A
ZC2 Z08
ZC1
Z08A
ZPS1
ZC3 Z09
Z09A
ZPA1 Z08
Z09
ZRCA
ZR1B ZR1
ZR1A

ZL1B
ZL1C
ZL1B
Z12 ZL1A
ZD2E
ZD2E Z12
ZD2B
ZD2B Z15A ZL1
ZD2F Z12A
Z15 Z12
ZD2C Z33
ZD1E
ZD1E ZD2A
ZD1B ZD2
ZD1B
ZD1F

ZD1C
E100 887E
ZD1A
ZD1 Enlarged bold type item
numbers are recommended
part to stock for servicing.

22 520L0895 • Rev AA • June 2007

 Series 90 130 cc Axial Piston Pump
Parts Manual
Variable displacement pump

special hardware
Order Date Date Qty. per
Code Item Begin End Part Number Part Name Model/Kit
GBL Z01 00-25 516748 Plug assembly 2
(continued) Z01A 00-25 516741 O-ring 2
Z03 00-25 516742 Plug assembly 2
Z03A 00-25 516743 O-ring 2
Z05 00-25 516744 Plug assembly 2
Z05A 00-25 516730 O-ring 2
Z07 00-25 516745 Plug assembly 1
Z07A 00-25 516746 O-ring 1
Z08 00-25 516742 Plug assembly 2
Z08A 00-25 516743 O-ring 2
Z09 00-25 516748 Plug assembly 2
Z09A 00-25 516749 O-ring 2
Z12 00-25 516750 Plug assembly 3
Z12A 00-25 516751 O-ring 3
Z15 00-25 516744 Plug assembly 1
Z15A 00-25 516730 O-ring 1
Z17 00-25 516745 Plug assembly 1
Z17A 00-25 516746 O-ring 1
Z31 00-25 516137 Connector 2
Z31A 00-25 085043 (9004201-3700) O-ring 2
Z32 00-25 516134 Hydraulic hose 1
Z33 00-25 019471 Screw 8
ZC1 00-25 516720 Check valve 1
ZC2 00-25 516721 Retainer 1
ZC3 00-25 516747 Headless screw 1
ZD1 00-25 516754 Pressure regulator 1
ZD1A 00-25 516723 O-ring 1
ZD1B 00-25 516725 Backup ring 2
ZD1C 00-25 516726 O-ring 1
ZD1E 00-25 516727 Backup ring 2
ZD1F 00-25 516728 O-ring 1
ZD2 00-25 516754 Pressure regulator 1
ZD2A 00-25 516723 O-ring 1
ZD2B 00-25 516725 Backup ring 2
ZD2C 00-25 516726 O-ring 1
ZD2E 00-25 516727 Backup ring 2
ZD2F 00-25 516728 O-ring 1
ZL1 00-25 516729 Relief valve 1
ZL1A 00-25 516730 O-ring 1
ZL1B 00-25 516731 Backup ring 2
ZL1C 00-25 516793 O-ring 1
ZPA1 00-25 516737 O-ring 1
ZPB1 00-25 516737 O-ring 1
ZPS1 00-25 516738 O-ring 1
ZR1 00-25 516733 Relief valve 1
ZR1A 00-25 516734 O-ring 1
ZR1B 00-25 516735 Backup ring 1
ZR1C 00-25 516736 O-ring 1
00-25 516702 Brake valve seal kit 1

520L0895 • Rev AA • June 2007 23

 Series 90 130 cc Axial Piston Pump
Parts Manual
Variable displacement pump

B83
B83A

s0

C05

E20

E22

E22

c80

B85 B85A

B84
B84A

B10
B83
B83A

B73

B73A
E100 889E

Enlarged bold type item

numbers are recommended
part to stock for servicing.

24 520L0895 • Rev AA • June 2007

 Series 90 130 cc Axial Piston Pump
Parts Manual
Variable displacement pump

special hardware
Order Date Date Qty. per
Code Item Begin End Part Number Part Name Model/Kit
GBP B83 06-17 140644 Plug assembly 1
B83A 06-17 085043 (9004201-3700) O-ring 1
C05 06-17 519258 Cylinder block assembly, without speed ring 1
C80 06-17 518807 Valve plate 1
E20 06-17 511052 Leveler 1
E22 06-17 8300011 Spring seat 2
S07 06-17 519274 Cylinder block kit, without speed ring, welded piston 1

GBS B83 92-19 140644 Plug assembly 1

B83A 92-19 085043 (9004201-3700) O-ring 1
C05 92-19 519258 Cylinder block assembly, without speed ring 1
C80 92-19 518807 Valve plate 1
E20 92-19 511052 Leveler (SB-1999-010) 1
E22 92-19 8300011 Spring seat (SB-1997-018) 2
S07 92-19 519274 Cylinder block kit, without speed ring, welded piston 1

GBT B10 92-19 515350 Housing 1

B73 92-19 140644 Plug assembly 1
B73A 92-19 085043 (9004201-3700) O-ring 1
B83 92-19 140644 Plug assembly 1
B83A 92-19 085043 (9004201-3700) O-ring 1
B84 92-19 509603 Plug assembly, M10 x 1 1
B84A 92-19 526533 O-ring 1
B85 92-19 509603 Plug assembly, M10 x 1 1
B85A 92-19 526533 O-ring 1
C05 92-19 519258 Cylinder block assembly, without speed ring 1
C80 92-19 518807 Valve plate 1
E20 92-19 511052 Leveler (SB-1999-010) 1
E22 92-19 8300011 Spring seat (SB-1997-018) 2
S07 92-19 519274 Cylinder block kit, without speed ring, welded piston 1

GBV B83 00-05 140644 Plug assembly 1

B83A 00-05 085043 (9004201-3700) O-ring 1
C05 00-05 519258 Cylinder block assembly, without speed ring 1
C80 00-05 518807 Valve plate 1
E20 00-05 511052 Leveler 1
E22 00-05 8300011 Spring seat 2
S07 00-05 519274 Cylinder block kit, without speed ring, welded piston 1

GBW B83 99-50 140644 Plug assembly 1

B83A 99-50 085043 (9004201-3700) O-ring 1
C05 99-50 519258 Cylinder block assembly, without speed ring 1
C80 99-50 518807 Valve plate 1
E20 99-50 511052 Leveler (SB-2007-008) 1
E22 99-50 8300011 Spring seat (SB-2007-008) 2
S07 99-50 519274 Cylinder block kit, without speed ring, welded piston 1

520L0895 • Rev AA • June 2007 25

 Series 90 130 cc Axial Piston Pump
Parts Manual
Variable displacement pump

B83
B83A

s0

C05

E20

E22

E22

c80

E100 887E

Enlarged bold type item

numbers are recommended
part to stock for servicing.

26 520L0895 • Rev AA • June 2007

 Series 90 130 cc Axial Piston Pump
Parts Manual
Variable displacement pump

special hardware
Order Date Date Qty. per
Code Item Begin End Part Number Part Name Model/Kit
GBY B83 99-52 140644 Plug assembly 1
B83A 99-52 085043 (9004201-3700) O-ring 1
C05 99-52 519258 Cylinder block assembly, without speed ring 1
C80 99-52 518934 Valve plate 1
E20 99-52 511052 Leveler (SB-1999-010) 1
E22 99-52 8300011 Spring seat (SB-1997-018) 2
S07 99-52 519274 Cylinder block kit, without speed ring, welded piston 1

GBZ B83 99-52 140644 Plug assembly 1

B83A 99-52 085043 (9004201-3700) O-ring 1
C05 99-52 519258 Cylinder block assembly, without speed ring 1
C80 99-52 518807 Valve plate 1
E20 99-52 511052 Leveler (SB-1999-010) 1
E22 99-52 8300011 Spring seat (SB-1997-018) 2
S07 99-52 519274 Cylinder block kit, without speed ring, welded piston 1
see next page for brake valve

520L0895 • Rev AA • June 2007 27

 Series 90 130 cc Axial Piston Pump
Parts Manual
Variable displacement pump

Z32
Z31

Z31A

Z05
Z01
Z05A
Z01
Z01A Z07
Z05
Z31
Z03
Z03A Z03 Z07A

ZPB1 Z17
Z17A
ZC2 Z08
ZC1
Z08A
ZPS1
ZC3 Z09
Z09A
ZPA1 Z08
Z09
ZRCA
ZR1B ZR1
ZR1A

ZL1B
ZL1C
ZL1B
Z12 ZL1A
ZD2E
ZD2E Z12
ZD2B
ZD2B Z15A ZL1
ZD2F Z12A
Z15 Z12
ZD2C Z33
ZD1E
ZD1E ZD2A
ZD1B ZD2
ZD1B
ZD1F

ZD1C
E100 887E
ZD1A
ZD1 Enlarged bold type item
numbers are recommended
part to stock for servicing.

28 520L0895 • Rev AA • June 2007

 Series 90 130 cc Axial Piston Pump
Parts Manual
Variable displacement pump

special hardware
Order Date Date Qty. per
Code Item Begin End Part Number Part Name Model/Kit
GBZ Z01 99-52 516748 Plug assembly 2
(continued) Z01A 99-52 516741 O-ring 2
Z03 99-52 516742 Plug assembly 2
Z03A 99-52 516743 O-ring 2
Z05 99-52 516744 Plug assembly 2
Z05A 99-52 516730 O-ring 2
Z07 99-52 516745 Plug assembly 1
Z07A 99-52 516746 O-ring 1
Z08 99-52 516742 Plug assembly 2
Z08A 99-52 516743 O-ring 2
Z09 99-52 516748 Plug assembly 2
Z09A 99-52 516749 O-ring 2
Z12 99-52 516750 Plug assembly 3
Z12A 99-52 516751 O-ring 3
Z15 99-52 516744 Plug assembly 1
Z15A 99-52 516730 O-ring 1
Z17 99-52 516745 Plug assembly 1
Z17A 99-52 516746 O-ring 1
Z31 99-52 516137 Connector 2
Z31A 99-52 085043 (9004201-3700) O-ring 2
Z32 99-52 516134 Hydraulic hose 1
Z33 99-52 019471 Screw 8
ZC1 99-52 516720 Check valve 1
ZC2 99-52 516721 Retainer 1
ZC3 99-52 516747 Headless screw 1
ZD1 99-52 516722 Pressure regulator 1
ZD1A 99-52 516723 O-ring 1
ZD1B 99-52 516725 Backup ring 2
ZD1C 99-52 516726 O-ring 1
ZD1E 99-52 516727 Backup ring 2
ZD1F 99-52 516728 O-ring 1
ZD2 99-52 516722 Pressure regulator 1
ZD2A 99-52 516723 O-ring 1
ZD2B 99-52 516725 Backup ring 2
ZD2C 99-52 516726 O-ring 1
ZD2E 99-52 516727 Backup ring 2
ZD2F 99-52 516728 O-ring 1
ZL1 99-52 516729 Relief valve 1
ZL1A 99-52 516730 O-ring 1
ZL1B 99-52 516731 Backup ring 2
ZL1C 99-52 516793 O-ring 1
ZPA1 99-52 516737 O-ring 1
ZPB1 99-52 516737 O-ring 1
ZPS1 99-52 516738 O-ring 1
ZR1 99-52 516733 Relief valve 1
ZR1A 99-52 516734 O-ring 1
ZR1B 99-52 516735 Backup ring 1
ZR1C 99-52 516736 O-ring 1
99-52 516702 Brake valve seal kit 1

520L0895 • Rev AA • June 2007 29

 Series 90 130 cc Axial Piston Pump
Parts Manual
Variable displacement pump

W3CN
W1CN
W1CNA

B83
B83A

B2CN

s0

C05

E20

E22

E22

c80

E100 890E

Enlarged bold type item

numbers are recommended
part to stock for servicing.

30 520L0895 • Rev AA • June 2007

 Series 90 130 cc Axial Piston Pump
Parts Manual
Variable displacement pump

Special hardware
Order Date Date Qty. per
Code Item Begin End Part Number Part Name Model/Kit
GCA B83 92-19 140644 Plug assembly 1
B83A 92-19 085043 (9004201-3700) O-ring 1
C05 92-19 519258 Cylinder block assembly, without speed ring 1
C80 92-19 518808 Valve plate 1
E20 92-19 511052 Leveler (SB-1999-010) 1
E22 92-19 8300011 Spring seat (SB-1997-018) 2
S07 92-19 519274 Cylinder block kit, without speed ring, welded piston 1

GCB B83 92-19 140644 Plug assembly 1

B83A 92-19 085043 (9004201-3700) O-ring 1
C05 92-19 519258 Cylinder block assembly, without speed ring 1
C80 92-19 518808 Valve plate 1
E20 92-19 511052 Leveler (SB-1999-010) 1
E22 92-19 8300011 Spring seat (SB-1997-018) 2
S07 92-19 519274 Cylinder block kit, without speed ring, welded piston 1

GCG B2CN 92-19 775312 Set screw, M8 x 8 1

B83 92-19 140644 Plug assembly 1
B83A 92-19 085043 (9004201-3700) O-ring 1
C05 92-19 519258 Cylinder block assembly, without speed ring 1
C80 92-19 518808 Valve plate 1
E20 92-19 511052 Leveler (SB-1999-010) 1
E22 92-19 8300011 Spring seat (SB-1997-018) 2
S07 92-19 519274 Cylinder block kit, without speed ring, welded piston 1
W1CN 92-19 723726 Connector 1
W1CNA 92-19 085043 (9004201-3700) O-ring 1
W3CN 92-19 574095 Cap 1

GCP B83 92-19 140644 Plug assembly 1

B83A 92-19 085043 (9004201-3700) O-ring 1
C05 92-19 519258 Cylinder block assembly, without speed ring 1
C80 92-19 518808 Valve plate 1
E20 92-19 511052 Leveler (SB-1999-010) 1
E22 92-19 8300011 Spring seat (SB-1997-018) 2
S07 92-19 519274 Cylinder block kit, without speed ring, welded piston 1

GCS B83 98-06 140644 Plug assembly 1

B83A 98-06 085043 (9004201-3700) O-ring 1
C05 98-06 519258 Cylinder block assembly, without speed ring 1
C80 98-06 518808 Valve plate 1
E20 98-06 511052 Leveler (SB-1999-010) 1
E22 98-06 8300011 Spring seat (SB-1997-018) 2
S07 98-06 519274 Cylinder block kit, without speed ring, welded piston 1

520L0895 • Rev AA • June 2007 31

 Series 90 130 cc Axial Piston Pump
Parts Manual
Variable displacement pump

W3CN
W1CN
W1CNA

B83
B83A

B2CN

s0

C05

E20

E22

E22

c80
B85 B85A

B84
B84A

B10
B83
B83A

B73

B73A

E100 891E

Enlarged bold type item

numbers are recommended
part to stock for servicing.

32 520L0895 • Rev AA • June 2007

 Series 90 130 cc Axial Piston Pump
Parts Manual
Variable displacement pump

Special hardware
Order Date Date Qty. per
Code Item Begin End Part Number Part Name Model/Kit
GDA B83 92-19 140644 Plug assembly 1
B83A 92-19 085043 (9004201-3700) O-ring 1
C05 92-19 519258 Cylinder block assembly, without speed ring 1
C80 92-19 518932 Valve plate 1
E20 92-19 511052 Leveler (SB-1999-010) 1
E22 92-19 8300011 Spring seat (SB-1997-018) 2
S07 92-19 519274 Cylinder block kit, without speed ring, welded piston 1

GDB B2CN 92-19 775312 Set screw, M8 x 8 1

B83 92-19 140644 Plug assembly 1
B83A 92-19 085043 (9004201-3700) O-ring 1
C05 92-19 519258 Cylinder block assembly, without speed ring 1
C80 92-19 518808 Valve plate 1
E20 92-19 511052 Leveler (SB-1999-010) 1
E22 92-19 8300011 Spring seat (SB-1997-018) 2
S07 92-19 519274 Cylinder block kit, without speed ring, welded piston 1
W1CN 92-19 723726 Connector 1
W1CNA 92-19 085043 (9004201-3700) O-ring 1
W3CN 92-19 574095 Cap 1

GLA B83 98-25 140644 Plug assembly 1

B83A 98-25 085043 (9004201-3700) O-ring 1
C05 98-25 519258 Cylinder block assembly, without speed ring 1
C80 00-13 518937 Valve plate, CW, lapped 1
C80 00-13 518938 Valve plate, CCW, lapped 1
E20 98-25 511052 Leveler (SB-1999-010) 1
E22 98-25 8300011 Spring seat (SB-1997-018) 2
S07 98-25 519274 Cylinder block kit, without speed ring, welded piston 1

GLP B10 98-02 515350 Housing 1

B73 98-02 140644 Plug assembly 1
B73A 98-02 085043 (9004201-3700) O-ring 1
B83 98-02 140644 Plug assembly 1
B83A 98-02 085043 (9004201-3700) O-ring 1
B84 98-02 509603 Plug assembly, M10 x 1 1
B84A 98-02 526533 O-ring 1
B85 98-02 509603 Plug assembly, M10 x 1 1
B85A 98-02 526533 O-ring 1
C05 98-02 519258 Cylinder block assembly, without speed ring 1
C80 00-13 518937 Valve plate, CW, lapped 1
C80 00-13 518938 Valve plate, CCW, lapped 1
E20 98-02 511052 Leveler (SB-1999-010) 1
E22 98-02 8300011 Spring seat (SB-1997-018) 2
S07 98-02 519274 Cylinder block kit, without speed ring, welded piston 1

520L0895 • Rev AA • June 2007 33

 Series 90 130 cc Axial Piston Pump
Parts Manual
Variable displacement pump

B83
B83A

s0

C05

E20

E22

E22

c80

E100 887E

Enlarged bold type item

numbers are recommended
part to stock for servicing.

34 520L0895 • Rev AA • June 2007

 Series 90 130 cc Axial Piston Pump
Parts Manual
Variable displacement pump

Special hardware
Order Date Date Qty. per
Code Item Begin End Part Number Part Name Model/Kit
GLS B83 98-18 140644 Plug assembly 1
B83A 98-18 085043 (9004201-3700) O-ring 1
C05 98-18 519258 Cylinder block assembly, without speed ring 1
C80 00-13 518937 Valve plate, CW, lapped 1
C80 00-13 518938 Valve plate, CCW, lapped 1
E20 98-18 511052 Leveler (SB-1999-010) 1
E22 98-18 8300011 Spring seat (SB-1997-018) 2
S07 98-18 519274 Cylinder block kit, without speed ring, welded piston 1

HBA B2CN 94-14 775312 Set screw, M8 x 8 1

B83 94-14 140644 Plug assembly 1
B83A 94-14 085043 (9004201-3700) O-ring 1
C05 94-14 519258 Cylinder block assembly, without speed ring 1
C80 94-14 518933 Valve plate 1
E20 94-14 511052 Leveler (SB-1999-010) 1
E22 94-14 8300011 Spring seat (SB-1997-018) 2
S07 94-14 519274 Cylinder block kit, without speed ring, welded piston 1
W1CN 94-14 723726 Connector 1
W3CN 94-14 574095 Cap 1

HCA B83 92-19 140644 Plug assembly 1

B83A 92-19 085043 (9004201-3700) O-ring 1
C05 92-19 519258 Cylinder block assembly, without speed ring 1
C80 92-19 518933 Valve plate 1
E20 92-19 511052 Leveler (SB-1999-010) 1
E22 92-19 8300011 Spring seat (SB-1997-018) 2
S07 92-19 519274 Cylinder block kit, without speed ring, welded piston 1

HDA B83 00-22 140644 Plug assembly 1

B83A 00-22 085043 (9004201-3700) O-ring 1
C05 00-22 519258 Cylinder block assembly, without speed ring 1
C80 00-22 518807 Valve plate 1
E20 00-22 511052 Leveler (SB-1999-010) 1
E22 00-22 8300011 Spring seat (SB-1997-018) 2
S07 00-22 519274 Cylinder block kit, without speed ring, welded piston 1

520L0895 • Rev AA • June 2007 35

 Series 90 130 cc Axial Piston Pump
Parts Manual

F01 f11
F113
F111

F01

F111 F40
F50

F40
F50

f10
F12
F11

F11
F12

F50
F40

F211
F50
F02
F40
F213
f1
F211
E100 892E F02
Enlarged bold type item
numbers are recommended
part to stock for servicing.

36 520L0895 • Rev AA • June 2007

 Series 90 130 cc Axial Piston Pump
Parts Manual
Variable displacement pump

displacement limitation
Order Date Date Qty. per
Code Item Begin End Part Number Part Name Model/Kit
1 F01 03-21 8302F004-A Displacement limiter kit, adjustable 1
F02 03-21 8202F003-A Displacement limiter kit, non-adjustable 1
F10 03-21 516685 Servo piston assembly (SB-2000-022) 1
F11 03-21 628396 O-ring 2
F12 03-21 507800 Piston ring 2
F40 03-21 354316 O-ring 2
F50 03-21 552224 (9004104-0360) O-ring 2
F111 03-21 378083 (9007210-0804) Screw 4
F112 03-21 042432 Seal nut, M10 1
F113 03-21 572180 Set screw, M10 x50 (SB-2000-022) 1
F211 03-21 378083 (9007210-0804) Screw 4

3 F01 89-41 8302F003-A Displacement limiter kit, non-adjustable 1

F02 89-41 8302F003-A Displacement limiter kit, non-adjustable 1
F10 89-41 516685 Servo piston assembly (SB-2000-022) 1
F11 89-41 628396 O-ring 2
F12 89-41 507800 Piston ring 2
F40 89-41 354316 O-ring 2
F50 98-14 552224 (9004104-0360) O-ring 2
F111 89-41 378083 (9007210-0804) Screw 4
F211 89-41 378083 (9007210-0804) Screw 4

4 F01 89-41 8302F004-A Displacement limiter kit, adjustable 1

F02 89-41 8302F004-A Displacement limiter kit, adjustable 1
F10 89-41 516685 Servo piston assembly (SB-2000-022) 1
F11 89-41 628396 O-ring 2
F12 89-41 507800 Piston ring 2
F40 89-41 354316 O-ring 2
F50 98-14 552224 (9004104-0360) O-ring 2
F111 89-41 378083 (9007210-0804) Screw 4
F112 00-02 042432 Seal nut, M10 1
F113 00-02 572180 Set screw M10 x50 (SB-2000-022) 1
F211 89-41 378083 (9007210-0804) Screw 4
F212 00-02 042432 Seal nut, M10 1
F213 00-02 572180 Set screw M10 x50 (SB-2000-022) 1

520L0895 • Rev AA • June 2007 37

 Series 90 130 cc Axial Piston Pump
Parts Manual
Variable displacement pump

F120
F119

F118

F116

F123

F115
f1 F117
F110
F111

F40
F50
F122
F121

f10
F12
F11

F11
F12

F50
F40

E100 893E F211

F02
Enlarged bold type item
numbers are recommended
part to stock for servicing.

38 520L0895 • Rev AA • June 2007

 Series 90 130 cc Axial Piston Pump
Parts Manual
Variable displacement pump

displacement limitation
Order Date Date Qty. per
Code Item Begin End Part Number Part Name Model/Kit
7 F02 98-14 8302F003-A Servo cylinder 1
F10 98-14 510498 Servo piston assembly 1
F11 98-14 628396 O-ring 2
F12 98-14 507800 Piston ring 2
F40 98-14 354316 O-ring 2
F50 98-14 552224 (9004104-0360) O-ring 2
F110 98-14 503014 Servo cylinder 1
F111 98-14 746651 Screw 4
F115 98-14 346031 Screw 1
F116 98-14 507096 Spring guide 1
F117 98-14 345967 Spring housing 1
F118 98-14 351742 Spring 1
F119 98-14 507094 Spring guide 1
F120 98-14 505826 Retaining ring 1
F121 98-14 507045 Castle nut 1
F122 98-14 346015 Hex nut 1
F123 98-14 346023 Adjust screw 1
F124 98-14 066159 Seal nut, M12 1
F211 89-41 378083 (9007210-0804) Screw 4

520L0895 • Rev AA • June 2007 39

 Series 90 130 cc Axial Piston Pump
Parts Manual
Variable displacement pump

F01

F111

F40
F50

f10
F12
F11

F117
F11
F12
F115

F123
F116

F118
F119
F120
F121
F210
F122
F50
F40

F211
f

E100 894E

Enlarged bold type item

numbers are recommended
part to stock for servicing.

40 520L0895 • Rev AA • June 2007

 Series 90 130 cc Axial Piston Pump
Parts Manual
Variable displacement pump

displacement limitation
Order Date Date Qty. per
Code Item Begin End Part Number Part Name Model/Kit
B F01 98-14 8202F003-A Servo cylinder 1
F10 98-14 510498 Servo piston assembly 1
F11 98-14 628396 O-ring 2
F12 98-14 507800 Piston ring 2
F40 98-14 354316 O-ring 2
F50 98-14 552224 (9004104-0360) O-ring 2
F111 98-14 378083 (9007210-0804) Screw 4
F115 98-14 346031 Screw 1
F116 98-14 507096 Spring guide 1
F117 98-14 345967 Spring housing 1
F118 98-14 351742 Spring 1
F119 98-14 507094 Spring guide 1
F120 98-14 505826 Retaining ring 1
F121 98-14 507045 Castle nut 1
F122 98-14 346015 Hex nut 1
F123 98-14 346023 Adjust screw 1
F210 98-14 503014 Servo cylinder 1
F211 98-14 746651 Screw 4
F224 98-14 066159 Seal nut, M12 1

520L0895 • Rev AA • June 2007 41

 Series 90 130 cc Axial Piston Pump
Parts Manual
Variable displacement pump

f11
F113

F125 F111
F126

f11 F110
F113
F40
F50
F111
F110
F40
F111 F50

F110
F40
F50

f10
F12
F11

F11
F12

F50
F40

F225
F210 F211
F226
F50
F40
F213
f1
F210
F50 F211
F40
F213
E100 895E
f1
Enlarged bold type item
numbers are recommended F210
F211
part to stock for servicing.

42 520L0895 • Rev AA • June 2007

 Series 90 130 cc Axial Piston Pump
Parts Manual
Variable displacement pump

displacement limitation
Order Date Date Qty. per
Code Item Begin End Part Number Part Name Model/Kit
E F10 91-30 509287 Servo piston assembly 1
F11 91-30 754150 O-ring 2
F12 91-30 754168 Piston ring 2
F40 91-30 354316 O-ring 2
F50 91-30 552224 (9004104-0360) O-ring 2
F110 91-30 751982 Servo cylinder, adjustable with gauge port 1
F111 91-30 676189 Screw 4
F112 91-30 076042 (9003509-0012) Seal nut, M12 1
F113 91-30 350090 Set screw, M12 x 70 1
F125 91-30 394312 Plug 1
F126 91-30 084640 Sealing ring 1
F210 91-30 751982 Servo cylinder, adjustable with gauge port 1
F211 91-30 676189 Screw 4
F212 91-30 076042 (9003509-0012) Seal nut, M12 1
F213 91-30 350090 Set screw, M12 x 70 1
F225 91-30 394312 Plug assembly 1
F226 91-30 084640 Sealing ring 1

R F10 91-30 516685 Servo piston assembly (SB-2000-022) 1

F11 91-30 628396 O-ring 2
F12 91-30 507800 Piston ring 2
F40 91-30 354316 O-ring 2
F50 91-30 552224 (9004104-0360) O-ring 2
F110 91-30 516238 Servo cylinder, 110cc displacement 1
F111 91-30 378083 (9007210-0804) Screw 4
F210 91-30 516238 Servo cylinder, 110cc displacement 1
F211 91-30 378083 (9007210-0804) Screw 4

S F10 05-37 516685 Servo piston assembly 1

F11 05-37 628396 O-ring 2
F12 05-37 507800 Piston ring 2
F40 05-37 354316 O-ring 2
F50 05-37 552224 (9004104-0360) O-ring 2
F110 05-37 501661 Servo cylinder, adjustable 1
F111 05-37 378083 (9007210-0804) Screw 4
F112 05-37 042432 Seal nut, M10 1
F113 05-37 11002555 Set screw, M10 x 30 1
F210 05-37 501661 Servo cylinder, adjustable 1
F211 05-37 378083 (9007210-0804) Screw 4
F212 05-37 042432 Seal nut, M10 1
F213 05-37 11002555 Set screw, M10 x 30 1

520L0895 • Rev AA • June 2007 43

 Series 90 130 cc Axial Piston Pump
Parts Manual
Variable displacement pump

G53
G53A

G54 G45
G54A G45A

G0
G90
G0

G51A
G51
G93
G94

G95 G0
G97 G04

G52
G98 G52A
G46
G46A

G45
G45A
G116

G116A G0
G90
G0

G93
G94

G95 G0
G97 G04

G98
G46
G46A
E100 896 E

Enlarged bold type item

numbers are recommended
part to stock for servicing.

44 520L0895 • Rev AA • June 2007

 Series 90 130 cc Axial Piston Pump
Parts Manual
Variable displacement pump

end cap
Order Date Date Qty. per
Code Item Begin End Part Number Part Name Model/Kit
80 G04 01-48 516600 End cap assembly, twin ports 1
G20 89-41 303693 Journal bearing 1
G30 89-41 730895 End cap gasket (SB-1992-003) 1
G40 89-41 303651 Bushing 1
G45 89-41 140644 Plug assembly 1
G45A 89-41 085043 (9004201-3700) O-ring 1
G46 89-41 140644 Plug assembly 1
G46A 89-41 085043 (9004201-3700) O-ring 1
G51 89-41 327007 (9005110-4400) Plug assembly 1
G51A 89-41 001123 (9004201-2500) O-ring 1
G52 89-41 140644 Plug assembly 1
G52A 89-41 085043 (9004201-3700) O-ring 1
G53 89-41 140644 Plug assembly 1
G53A 89-41 085043 (9004201-3700) O-ring 1
G54 89-41 140644 Plug assembly 1
G54A 89-41 085043 (9004201-3700) O-ring 1
G90 01-48 713768 (9007314-0812) Screw, M8 x 55 1
G90 89-41 01-47 746644 (9007314-0810) Screw, M8 x 45 1
G93 89-41 713800 (8800564) Spacer 1
G94 89-41 8800565 Lifting bracket 1
G95 89-41 502195 Washer 1
G97 01-48 713768 (9007314-0812) Screw, M8 x 55 1
G97 89-41 01-47 748954 (9007314-0811) Screw, M8 x 50 1
G98 01-48 713768 (9007314-0812) Screw, M8 x 55 1
G98 89-41 01-47 746644 (9007314-0810) Screw, M8 x 45 1

84 G04 02-03 516603 End cap assembly, twin ports 1

G20 94-48 303693 Journal bearing 1
G30 94-48 730895 End cap gasket 1
G40 94-48 303651 Bushing 1
G45 94-48 140644 Plug assembly 1
G45A 94-48 085043 (9004201-3700) O-ring 1
G46 94-48 140644 Plug assembly 1
G46A 94-48 085043 (9004201-3700) O-ring 1
G90 02-03 713768 (9007314-0812) Screw, M8 x 55 1
G90 89-41 02-03 746644 (9007314-0810) Screw, M8 x 45 1
G93 94-48 713800 (8800564) Spacer 1
G94 94-48 8800565 Lifting bracket 1
G95 94-48 502195 Washer 1
G97 02-03 713768 (9007314-0812) Screw, M8 x 55 1
G97 89-41 02-03 748954 (9007314-0811) Screw, M8 x 50 1
G98 02-03 713768 (9007314-0812) Screw, M8 x 55 1
G98 89-41 02-03 746644 (9007314-0810) Screw, M8 x 45 1
G116 94-48 140644 Plug assembly 1
G116A 94-48 085043 (9004201-3700) O-ring 1

520L0895 • Rev AA • June 2007 45

 Series 90 130 cc Axial Piston Pump
Parts Manual
Variable displacement pump

G53
G53A

G54 G45
G54A G45A

G0
G90
G0

G51A
G51
G93
G94

G95 G0
G97 G04

G52
G98 G52A
G46
G46A

E100 897 E

Enlarged bold type item

numbers are recommended
part to stock for servicing.

46 520L0895 • Rev AA • June 2007

 Series 90 130 cc Axial Piston Pump
Parts Manual
Variable displacement pump

end cap
Order Date Date Qty. per
Code Item Begin End Part Number Part Name Model/Kit
85 G04 01-38 517973 End cap assembly, twin ports 1
G20 01-38 303693 Journal bearing 1
G30 01-38 730895 End cap gasket 1
G40 01-38 303651 Bushing 1
G45 01-38 140644 Plug assembly 1
G45A 01-38 085043 (9004201-3700) O-ring 1
G46 01-38 140644 Plug assembly 1
G46A 01-38 085043 (9004201-3700) O-ring 1
G51 01-38 327007 (9005110-4400) Plug assembly 1
G51A 01-38 001123 (9004201-2500) O-ring 1
G52 01-38 140644 Plug assembly 1
G52A 01-38 085043 (9004201-3700) O-ring 1
G53 01-38 140644 Plug assembly 1
G53A 01-38 085043 (9004201-3700) O-ring 1
G54 01-38 140644 Plug assembly 1
G54A 01-38 085043 (9004201-3700) O-ring 1
G90 01-38 713768 (9007314-0812) Screw, M8 x 55 1
G93 01-38 713800 (8800564) Spacer 1
G94 01-38 8800565 Lifting bracket 1
G95 01-38 502195 Washer 1
G97 01-38 713768 (9007314-0812) Screw, M8 x 55 1
G98 01-38 713768 (9007314-0812) Screw, M8 x 55 1

86 G04 02-03 517973 End cap assembly, twin ports 1

G20 93-35 303693 Journal bearing 1
G30 93-35 730895 End cap gasket 1
G40 93-35 303651 Bushing 1
G45 93-35 140644 Plug assembly 1
G45A 93-35 085043 (9004201-3700) O-ring 1
G46 93-35 140644 Plug assembly 1
G46A 93-35 085043 (9004201-3700) O-ring 1
G51 93-35 327007 (9005110-4400) Plug assembly 1
G51A 93-35 001123 (9004201-2500) O-ring 1
G52 93-35 140644 Plug assembly 1
G52A 93-35 085043 (9004201-3700) O-ring 1
G53 93-35 140644 Plug assembly 1
G53A 93-35 085043 (9004201-3700) O-ring 1
G54 93-35 140644 Plug assembly 1
G54A 93-35 085043 (9004201-3700) O-ring 1
G90 02-03 713768 (9007314-0812) Screw, M8 x 55 1
G90 93-35 02-02 746644 (9007314-0810) Screw, M8 x 45 1
G93 93-35 713800 (8800564) Spacer 1
G94 93-35 8800565 Lifting bracket 1
G95 93-35 502195 Washer 1
G97 02-03 713768 (9007314-0812) Screw, M8 x 55 1
G97 93-35 02-02 748954 (9007314-0811) Screw, M8 x 50 1
G98 02-03 713768 (9007314-0812) Screw, M8 x 55 1
G98 93-35 02-02 746644 (9007314-0810) Screw, M8 x 45 1

520L0895 • Rev AA • June 2007 47

 Series 90 130 cc Axial Piston Pump
Parts Manual
Variable displacement pump

G53
G53A
G116 G54 G45
G54A G45A
G116A

G0
G90
G0

G51A
G51
G93
G94

G95 G0
G97 G04

G52
G98 G52A
G46
G46A

G45
G45A

G0
G90
G0

G93
G94

G95 G0
G97 G04

G98
G46
G46A
E100 898 E

Enlarged bold type item

numbers are recommended
part to stock for servicing.

48 520L0895 • Rev AA • June 2007

 Series 90 130 cc Axial Piston Pump
Parts Manual
Variable displacement pump

end cap
Order Date Date Qty. per
Code Item Begin End Part Number Part Name Model/Kit
87 G04 01-47 516604 End cap assembly, twin ports 1
G20 92-51 303693 Journal bearing 1
G30 92-51 730895 End cap gasket 1
G40 92-51 303651 Bushing 1
G45 92-51 140644 Plug assembly 1
G45A 92-51 085043 (9004201-3700) O-ring 1
G46 92-51 140644 Plug assembly 1
G46A 92-51 085043 (9004201-3700) O-ring 1
G51 92-51 327007 (9005110-4400) Plug assembly 1
G51A 92-51 001123 (9004201-2500) O-ring 1
G52 92-51 140644 Plug assembly 1
G52A 92-51 085043 (9004201-3700) O-ring 1
G53 92-51 140644 Plug assembly 1
G53A 92-51 085043 (9004201-3700) O-ring 1
G54 92-51 140644 Plug assembly 1
G54A 92-51 085043 (9004201-3700) O-ring 1
G90 01-47 713768 (9007314-0812) Screw, M8 x 55 1
G90 92-51 01-46 746644 (9007314-0810) Screw, M8 x 45 1
G93 92-51 713800 (8800564) Spacer 1
G94 92-51 8800565 Lifting bracket 1
G95 92-51 502195 Washer 1
G97 01-47 713768 (9007314-0812) Screw, M8 x 55 1
G97 92-51 01-46 748954 (9007314-0811) Screw, M8 x 50 1
G98 01-47 713768 (9007314-0812) Screw, M8 x 55 1
G98 92-51 01-46 746644 (9007314-0810) Screw, M8 x 45 1
G116 92-51 140644 Plug assembly 1
G116A 92-51 085043 (9004201-3700) O-ring 1

89 G04 02-07 516605 End cap assembly, twin ports 1

G20 91-06 303693 Journal bearing 1
G30 91-06 730895 End cap gasket 1
G40 91-06 303651 Bushing 1
G45 91-06 140644 Plug assembly 1
G45A 91-06 085043 (9004201-3700) O-ring 1
G46 91-06 140644 Plug assembly 1
G46A 91-06 085043 (9004201-3700) O-ring 1
G90 02-07 713768 (9007314-0812) Screw, M8 x 55 1
G90 91-06 02-06 746644 (9007314-0810) Screw, M8 x 45 1
G93 91-06 713800 (8800564) Spacer 1
G94 91-06 8800565 Lifting bracket 1
G95 91-06 502195 Washer 1
G97 02-07 713768 (9007314-0812) Screw, M8 x 55 1
G97 91-06 02-06 748954 (9007314-0811) Screw, M8 x 50 1
G98 02-07 713768 (9007314-0812) Screw, M8 x 55 1
G98 91-06 02-06 746644 (9007314-0810) Screw, M8 x 45 1

520L0895 • Rev AA • June 2007 49

 Series 90 130 cc Axial Piston Pump
Parts Manual
Variable displacement pump

G53
G53A
G54
G112
G54A G112A G111
G111A
G114
G14 G45
G19
G114A G45A
G56 G0
G56A
G55 G0
G55A
G90

G93
G94

G95 G0
G97 G04

G47
G98
G47A
G46
G46A

E100 899 E

Enlarged bold type item

numbers are recommended
part to stock for servicing.

50 520L0895 • Rev AA • June 2007

 Series 90 130 cc Axial Piston Pump
Parts Manual
Variable displacement pump

end cap
Order Date Date Qty. per
Code Item Begin End Part Number Part Name Model/Kit
8C G04 01-50 516601 End cap assembly, twin ports 1
G14 91-26 765750 Orifice 1
G19 91-26 759415 Spool 1
G20 91-26 303693 Journal bearing 1
G30 91-26 730895 End cap gasket 1
G40 91-26 303651 Journal bearing 1
G45 91-26 140644 Plug assembly 1
G45A 91-26 085043 (9004201-3700) O-ring 1
G46 91-26 140644 Plug assembly 1
G46A 91-26 085043 (9004201-3700) O-ring 1
G47 91-26 140644 Plug assembly 1
G47A 91-26 085043 (9004201-3700) O-ring 1
G53 91-26 140644 Plug assembly 1
G53A 91-26 085043 (9004201-3700) O-ring 1
G54 91-26 140644 Plug assembly 1
G54A 91-26 085043 (9004201-3700) O-ring 1
G55 91-26 9005100-3700 Plug assembly 1
G55A 91-26 9004201-1900 O-ring 1
G56 91-26 327007 (9005110-4400) Plug assembly 1
G56A 91-26 001123 (9004201-2500) O-ring 1
G90 01-50 713768 (9007314-0812) Screw, M8 x 55 1
G90 91-26 01-49 746644 (9007314-0810) Screw, M8 x 45 1
G93 91-26 713800 (8800564) Spacer 1
G94 91-26 8800565 Lifting bracket 1
G95 91-26 502195 Washer 1
G97 01-50 713768 (9007314-0812) Screw, M8 x 55 1
G97 92-51 01-49 748954 (9007314-0811) Screw, M8 x 50 1
G98 01-50 713768 (9007314-0812) Screw, M8 x 55 1
G98 91-26 01-49 746644 (9007314-0810) Screw, M8 x 45 1
G111 91-26 504519 Plug assembly 1
G111A 91-26 039297 (9004201-1200) O-ring 1
G112 91-26 504519 Plug assembly 1
G112A 91-26 039297 (9004201-1200) O-ring 1
G114 91-26 9005100-3700 Plug assembly 1
G114A 91-26 9004201-1900 O-ring 1

520L0895 • Rev AA • June 2007 51

 Series 90 130 cc Axial Piston Pump
Parts Manual
Variable displacement pump

G80

G78

G77

G13 G79
G13A
G14
G14A

G17A
G17
G90
G0

G19A
G0
G16A
G19 G16

G11A G15A
G93 G11 G15
G94

G95
G97
G12A
G0 G12
G46A
G18 G46
G98 G18A

G47A G47

E100 900 E

Enlarged bold type item

numbers are recommended
part to stock for servicing.

52 520L0895 • Rev AA • June 2007

 Series 90 130 cc Axial Piston Pump
Parts Manual
Variable displacement pump

end cap
Order Date Date Qty. per
Code Item Begin End Part Number Part Name Model/Kit
8E G11 02-15 140644 Plug assembly 1
G11A 02-15 085043 (9004201-3700) O-ring 1
G12 02-15 504519 Plug assembly 1
G12A 02-15 039297 (9004201-1200) O-ring 1
G13 02-15 504519 Plug assembly 1
G13A 02-15 039297 (9004201-1200) O-ring 1
G14 02-15 504519 Plug assembly 1
G14A 02-15 039297 (9004201-1200) O-ring 1
G15 02-15 504519 Plug assembly 1
G15A 02-15 039297 (9004201-1200) O-ring 1
G16 02-15 504519 Plug assembly 1
G16A 02-15 039297 (9004201-1200) O-ring 1
G17 02-15 504519 Plug assembly 1
G17A 02-15 039297 (9004201-1200) O-ring 1
G18 02-15 504519 Plug assembly 1
G18A 02-15 039297 (9004201-1200) O-ring 1
G19 02-15 504519 Plug assembly 1
G19A 02-15 039297 (9004201-1200) O-ring 1
G20 02-15 303693 Journal bearing 1
G30 02-15 730895 End cap gasket 1
G40 02-15 303651 Bushing 1
G46 02-15 140644 Plug assembly 1
G46A 02-15 085043 (9004201-3700) O-ring 1
G47 02-15 140644 Plug assembly 1
G47A 02-15 085043 (9004201-3700) O-ring 1
G77 02-15 517830 Piston 1
G78 02-15 517832 Spring 1
G79 02-15 517827 Piston 1
G80 02-15 504681 Screw, M12 x 55 4
G90 02-15 713768 (9007314-0812) Screw, M8 x 55 1
G93 02-15 713800 (8800564) Spacer 1
G94 02-15 8800565 Lifting bracket 1
G95 02-15 502195 Washer 1
G97 02-15 506969 Screw, M8 x 25 1
G98 02-15 713768 (9007314-0812) Screw, M8 x 55 1

520L0895 • Rev AA • June 2007 53

 Series 90 130 cc Axial Piston Pump
Parts Manual
Variable displacement pump

G80

G78

G77
G13
G13A
G21 G79
G21A
G116A G14
G14A
G116
G17A
G17
G41 G90 G0

G19A
G0
G16A
G19 G16

G11A G15A
G93 G11 G15
G94

G95
H90A
G97
G12A
G0 G12
G46A
G18 G46 H90
G98 G18A

G47A G47

E100 901 E

Enlarged bold type item

numbers are recommended
part to stock for servicing.

54 520L0895 • Rev AA • June 2007

 Series 90 130 cc Axial Piston Pump
Parts Manual
Variable displacement pump

end cap
Order Date Date Qty. per
Code Item Begin End Part Number Part Name Model/Kit
8F G11 02-15 140644 Plug assembly 1
G11A 02-15 085043 (9004201-3700) O-ring 1
G12 02-15 504519 Plug assembly 1
G12A 02-15 039297 (9004201-1200) O-ring 1
G13 02-15 504519 Plug assembly 1
G13A 02-15 039297 (9004201-1200) O-ring 1
G14 02-15 504519 Plug assembly 1
G14A 02-15 039297 (9004201-1200) O-ring 1
G15 02-15 504519 Plug assembly 1
G15A 02-15 039297 (9004201-1200) O-ring 1
G16 02-15 504519 Plug assembly 1
G16A 02-15 039297 (9004201-1200) O-ring 1
G17 02-15 504519 Plug assembly 1
G17A 02-15 039297 (9004201-1200) O-ring 1
G18 02-15 504519 Plug assembly 1
G18A 02-15 039297 (9004201-1200) O-ring 1
G19 02-15 504519 Plug assembly 1
G19A 02-15 039297 (9004201-1200) O-ring 1
G20 02-15 303693 Journal bearing 1
G21 02-15 504519 Plug assembly 1
G21A 02-15 039297 (9004201-1200) O-ring 1
G30 02-15 730895 End cap gasket 1
G40 02-15 303651 Bushing 1
G41 02-15 500880 Tube 1
G46 02-15 140644 Plug assembly 1
G46A 02-15 085043 (9004201-3700) O-ring 1
G47 02-15 140644 Plug assembly 1
G47A 02-15 085043 (9004201-3700) O-ring 1
G77 02-15 517830 Piston 1
G78 02-15 517832 Spring 1
G79 02-15 517827 Piston 1
G80 02-15 504681 Screw, M12 x 55 4
G90 02-15 713768 (9007314-0812) Screw, M8 x 55 1
G93 02-15 713800 (8800564) Spacer 1
G94 02-15 8800565 Lifting bracket 1
G95 02-15 502195 Washer 1
G97 02-15 506969 Screw, M8 x 25 1
G98 02-15 713768 (9007314-0812) Screw, M8 x 55 1
G116 02-15 140644 Plug assembly 1
G116A 02-15 085043 (9004201-3700) O-ring 1
H90 04-41 521318 Reducer, 1 5/8-12/M27 1
H90 02-15 04-40 516584 Reducer, 1 5/8-12/M22 1
H90A 02-15 093823 (9004201-9200) O-ring 1

520L0895 • Rev AA • June 2007 55

 Series 90 130 cc Axial Piston Pump
Parts Manual
Variable displacement pump

G80

G78

G77
G13
G13A
G21 G79
G21A
G14
G14A

G17A
G17
G90
G0

G19A
G0
G16A
G19 G16

G11A G15A
G93 G11 G15
G94

G95
G97
G12A
G0 G12
G46A
G18 G46
G98 G18A

G47A G47

E100 902 E

Enlarged bold type item

numbers are recommended
part to stock for servicing.

56 520L0895 • Rev AA • June 2007

 Series 90 130 cc Axial Piston Pump
Parts Manual
Variable displacement pump

end cap
Order Date Date Qty. per
Code Item Begin End Part Number Part Name Model/Kit
8J G11 06-28 140644 Plug assembly 1
G11A 06-28 085043 (9004201-3700) O-ring 1
G12 06-28 504519 Plug assembly 1
G12A 06-28 039297 (9004201-1200) O-ring 1
G13 06-28 504519 Plug assembly 1
G13A 06-28 039297 (9004201-1200) O-ring 1
G14 06-28 504519 Plug assembly 1
G14A 06-28 039297 (9004201-1200) O-ring 1
G15 06-28 504519 Plug assembly 1
G15A 06-28 039297 (9004201-1200) O-ring 1
G16 06-28 504519 Plug assembly 1
G16A 06-28 039297 (9004201-1200) O-ring 1
G17 06-28 504519 Plug assembly 1
G17A 06-28 039297 (9004201-1200) O-ring 1
G18 06-28 504519 Plug assembly 1
G18A 06-28 039297 (9004201-1200) O-ring 1
G19 06-28 504519 Plug assembly 1
G19A 06-28 039297 (9004201-1200) O-ring 1
G20 06-28 303693 Journal bearing 1
G21 06-28 504519 Plug assembly 1
G21A 06-28 039297 (9004201-1200) O-ring 1
G30 06-28 730895 End cap gasket 1
G40 06-28 303651 Bushing 1
G46 06-28 140644 Plug assembly 1
G46A 06-28 085043 (9004201-3700) O-ring 1
G47 06-28 140644 Plug assembly 1
G47A 06-28 085043 (9004201-3700) O-ring 1
G77 06-28 517830 Piston 1
G78 06-28 517832 Spring 1
G79 06-28 517827 Piston 1
G80 06-28 504681 Screw, M12 x 55 4
G90 06-28 713768 (9007314-0812) Screw, M8 x 55 1
G93 06-28 713800 (8800564) Spacer 1
G94 06-28 8800565 Lifting bracket 1
G95 06-28 502195 Washer 1
G97 06-28 506969 Screw, M8 x 25 1
G98 06-28 713768 (9007314-0812) Screw, M8 x 55 1

520L0895 • Rev AA • June 2007 57

 Series 90 130 cc Axial Piston Pump
Parts Manual
Variable displacement pump

G45
G45A

G0
G90
G0

G93
G94

G95 G0
G97 G04
G98
G46
G46A

E100 903 E

Enlarged bold type item

numbers are recommended
part to stock for servicing.

58 520L0895 • Rev AA • June 2007

 Series 90 130 cc Axial Piston Pump
Parts Manual
Variable displacement pump

end cap
Order Date Date Qty. per
Code Item Begin End Part Number Part Name Model/Kit
8W G04 02-25 518631 End cap assembly, twin ports 1
G20 02-25 303693 Journal bearing 1
G30 02-25 730895 End cap gasket 1
G40 02-25 303651 Bushing 1
G45 02-25 140644 Plug assembly 1
G45A 02-25 085043 (9004201-3700) O-ring 1
G46 02-25 140644 Plug assembly 1
G46A 02-25 085043 (9004201-3700) O-ring 1
G90 02-25 713768 (9007314-0812) Screw, M8 x 55 1
G93 02-25 713800 (8800564) Spacer 1
G94 02-25 8800565 Lifting bracket 1
G95 02-25 502195 Washer 1
G97 02-25 713768 (9007314-0812) Screw, M8 x 55 1
G98 02-25 713768 (9007314-0812) Screw, M8 x 55 1

520L0895 • Rev AA • June 2007 59

 Series 90 130 cc Axial Piston Pump
Parts Manual
Variable displacement pump

H25

H70

h50 H90
H80 H25

H90A
H70
h0
h50
h0
H80 h05

H70

H80

E100 904E

Enlarged bold type item

numbers are recommended
part to stock for servicing.

60 520L0895 • Rev AA • June 2007

 Series 90 130 cc Axial Piston Pump
Parts Manual
Variable displacement pump

charging system
Order Date Date Qty. per
Code Item Begin End Part Number Part Name Model/Kit
F & Z H05 04-49 8200240 Charge pump set, 26 cc 1
(special*) H40 04-49 9004800-1224 Pin 1
H50 04-49 8801178 Charge pump shaft 1
H60 04-49 9003310-1208 Key 1
H70 04-49 516761 Retaining plate 1
H80 04-49 648451 Screw 6
* Used with 8E, 8F or 8J end cap option only.

F H05 93-34 501405 Charge pump set, 26 cc (SB-1994-025) 1

H40 89-41 308718 Pin 1
H50 93-34 513436 Charge pump shaft (SB-1994-025) 1
H60 89-41 734608 Key 1
H70 89-41 509361 Retaining plate 1
H80 89-41 378083 (9007210-0804) Screw 6

H H05 93-34 501406 Charge pump, set 34 cc 1

H40 89-41 308718 Pin 1
H50 93-34 513436 Charge pump shaft (SB-1994-025) 1
H60 89-41 734608 Key 1
H70 89-41 509361 Retaining plate 1
H80 89-41 378083 (9007210-0804) Screw 6

L H25 89-41 339762 Charge pump spacer 1

H50 93-34 513436 Charge pump shaft 1
H70 89-41 509361 Retaining plate 1
H80 89-41 378083 (9007210-0804) Screw 6
H90 89-41 676734 (9005110-9500) Plug assembly 1
H90A 89-41 093823 (9004201-9200) O-ring 1

N H25 93-29 339762 Charge pump spacer 1

H70 93-29 509361 Retaining plate 1
H80 93-29 378083 (9007210-0804) Screw 6
H90 93-29 676734 (9005110-9500) Plug assembly 1
H90A 93-29 093823 (9004201-9200) O-ring 1

R H05 95-03 503758 Charge pump, set 41 cc 1

H40 95-03 504558 Pin 1
H50 95-03 513435 Charge pump shaft 1
H60 95-03 734608 Key 1
H70 95-03 509361 Retaining plate 1
H80 95-03 378083 (9007210-0804) Screw 6

U H05 96-02 509579 Charge pump, set 30 cc 1

H40 96-02 308718 Pin 1
H50 96-02 513436 Charge pump shaft 1
H60 96-02 734608 Key 1
H70 96-02 509361 Retaining plate 1
H80 96-02 378083 (9007210-0804) Screw 6

520L0895 • Rev AA • June 2007 61

 Series 90 130 cc Axial Piston Pump
Parts Manual
Variable displacement pump

j15
j0
J10
j50
J60

J70

J80

J J40
J95
j90

j15
J92 j0
J10

j50
J60

J70

J80

J95

j90

J92 j15
j0
J10

j50
J60

J70

J80

J40
J
J95
j90
E100 905E

Enlarged bold type item

J92 numbers are recommended
part to stock for servicing.

62 520L0895 • Rev AA • June 2007

 Series 90 130 cc Axial Piston Pump
Parts Manual
Variable displacement pump

Auxiliary mounting
Order Date Date Qty. per
Code Item Begin End Part Number Part Name Model/Kit
AB & A J 89-41 8302J00A-A Aux. mounting kit, A flange, 9 tooth 1
J10 89-41 310466 Coupling, 9 tooth 1
J15 89-41 501402 Cover assembly, CW (SB-1994-025*) 1
J15 89-41 501401 Cover assembly, CCW (SB-1994-025*) 1
J30 89-41 303651 Bushing 1
J40 89-41 92-29 354324 O-ring 1
J50 89-41 505068 O-ring 1
J60 89-41 505113 Flange adaptor, SAE A 1
J70 89-41 664920 (9009625-0132) Washer 4
J80 89-41 338798 (9007314-1625) Screw, M16 x 160 4
J90 89-41 726950 (9004104-0420) O-ring 1
J92 89-41 9802336 Cover plate 1
J95 89-41 9007200-3714 Screw 2
* New style covers are interchangeable with either charge pump design

AN J10 03-07 8100147 Coupling, 9 tooth 1

J15 03-07 8800832 Cover assembly, CW 1
J30 03-07 664771 (8700008) Bushing 1
J50 03-07 505068 O-ring 1
J60 03-07 505113 Flange adaptor, SAE A 1
J70 03-07 664920 (9009625-0132) Washer 4
J80 03-07 338798 (9007314-1625) Screw, M16 x 160 4
J90 03-07 726950 (9004104-0420) O-ring 1
J92 03-07 9802336 Cover plate 1
J95 03-07 9007200-3714 Screw 2

BB & V J 89-41 8302J00V-A Aux. mounting kit, B-B flange, 15 tooth 1

J10 89-41 310482 Coupling, 15 tooth 1
J15 89-41 501402 Cover assembly, CW (SB-1994-025*) 1
J15 89-41 501401 Cover assembly, CCW (SB-1994-025*) 1
J30 89-41 303651 Bushing 1
J40 89-41 92-29 354324 O-ring 1
J50 89-41 056068 O-ring 1
J60 89-41 503230 Flange adaptor, SAE B 1
J70 89-41 664920 (9009625-0132) Washer 4
J80 89-41 338798 (9007314-1625) Screw, M16 x 160 4
J90 89-41 726935 (9004104-0450) O-ring 1
J92 89-41 4460370 Cover plate 1
J95 89-41 9007200-5021 Screw 2
* New style covers are interchangeable with either charge pump design

520L0895 • Rev AA • June 2007 63

 Series 90 130 cc Axial Piston Pump
Parts Manual
Variable displacement pump

J40

j15
j0
J10

J60

J70
j50
J80

j90
j15
j0
J92
J95
J60

J70

J80
j50

j90
j15
j0

J10
J92
J95

J60

J70

J80
j50

j90
E100 906E

Enlarged bold type item

J92 numbers are recommended
J95 part to stock for servicing.

64 520L0895 • Rev AA • June 2007

 Series 90 130 cc Axial Piston Pump
Parts Manual
Variable displacement pump

Auxiliary mounting
Order Date Date Qty. per
Code Item Begin End Part Number Part Name Model/Kit
BC & B J 89-41 8302J00B-A Aux. mounting kit, B flange, 13 tooth 1
J10 89-41 310474 Coupling, 13 tooth 1
J15 89-41 501402 Cover assembly, CW (SB-1994-025*) 1
J15 89-41 501401 Cover assembly, CCW (SB-1994-025*) 1
J30 89-41 303651 Bushing 1
J40 89-41 92-29 354324 O-ring 1
J50 89-41 056068 O-ring 1
J60 89-41 503230 Flange adaptor, SAE B 1
J70 89-41 664920 (9009625-0132) Washer 4
J80 89-41 338798 (9007314-1625) Screw, M16 x 160 4
J90 89-41 726935 (9004104-0450) O-ring 1
J92 89-41 4460370 Cover plate 1
J95 89-41 9007200-5021 Screw 2
* New style covers are interchangeable with either charge pump design

BJ J10 89-41 8100148 Coupling, 13 tooth 1

J15 89-41 8800833 Cover assembly, CCW 1
J30 89-41 664771 Bushing 1
J50 89-41 056068 O-ring 1
J60 89-41 11000255 Flange adaptor, SAE B 1
J70 89-41 664920 (9009625-0132) Washer 4
J80 89-41 338798 (9007314-1625) Screw, M16 x 160 4
J90 89-41 726935 (9004104-0450) O-ring 1
J92 89-41 4460370 Cover plate 1
J95 89-41 544478 (9007200-5016) Screw 2

BS J10 06-13 310474 Coupling, 13 tooth 1

J15 06-13 11002217 Cover assembly, CCW 1
J30 06-13 303651 Bushing 1
J50 06-13 056068 O-ring 1
J60 06-13 503230 Flange adaptor, SAE B 1
J70 06-13 664920 (9009625-0132) Washer 4
J80 06-13 338798 (9007314-1625) Screw, M16 x 160 4
J90 06-13 726935 (9004104-0450) O-ring 1
J92 06-13 4460370 Cover plate 1
J95 06-13 9007200-5021 Screw 2

520L0895 • Rev AA • June 2007 65

 Series 90 130 cc Axial Piston Pump
Parts Manual
Variable displacement pump

j15
j0
J10

J97 J60

J80

j50

J97
J90 j15
j0
J80
J92 J10
J95

J60

J70
j50 J40
J80

j90
j15
j0
J92 J10
J95

J60

j90
j50
J92

E100 907E

J70
Enlarged bold type item
J80 numbers are recommended
part to stock for servicing.
J95

66 520L0895 • Rev AA • June 2007

 Series 90 130 cc Axial Piston Pump
Parts Manual
Variable displacement pump

Auxiliary mounting
Order Date Date Qty. per
Code Item Begin End Part Number Part Name Model/Kit
CB J10 03-38 310508 Coupling, 14 tooth 1
J15 03-38 513832 Cover assembly, CW 1
J30 03-38 303651 Bushing 1
J50 03-38 056068 O-ring 1
J60 03-38 513617 Flange adaptor, SAE C 1
J80 03-38 338798 (9007314-1625) Screw, M16 x 160 4
J90 03-38 8801062 C pad seal 1
J92 03-38 8801060 Cover plate 1
J95 03-38 9007200-5021 Screw 4
J97 03-38 519663 Auxiliary mounting bracket 1

CD & C J 89-41 8302J00C-A Aux. mounting kit, C flange, 14 tooth 1

J10 89-41 310508 Coupling, 14 tooth 1
J15 89-41 501402 Cover assembly, CW (SB-1994-025*) 1
J15 89-41 501401 Cover assembly, CCW (SB-1994-025*) 1
J30 89-41 303651 Bushing 1
J40 89-41 92-29 354324 O-ring 1
J50 89-41 056068 O-ring 1
J60 89-41 505116 Flange adaptor, SAE C 1
J70 89-41 664920 (9009625-0132) Washer 4
J80 89-41 338798 (9007314-1625) Screw, M16 x 160 4
J90 89-41 726943 (9004104-0490) O-ring 1
J92 89-41 8800406 Cover plate 1
J95 89-41 9007200-5021 Screw 4
* New style covers are interchangeable with either charge pump design
CF J10 96-18 705954 Coupling, 21 tooth 1
J15 96-18 501402 Cover assembly, CW 1
J15 96-18 501401 Cover assembly, CCW 1
J30 96-18 303651 Bushing 1
J50 96-18 056068 O-ring 1
J60 96-18 505116 Flange adaptor, SAE C 1
J70 96-18 664920 (9009625-0132) Washer 4
J80 96-18 338798 (9007314-1625) Screw, M16 x 160 4
J90 96-18 726943 (9004104-0490) O-ring 1
J92 96-18 8800406 Cover plate 1
J95 96-18 9007200-5021 Screw 4

CK J10 96-18 504517 Coupling, 25 tooth 1

J15 96-18 501402 Cover assembly, CW 1
J15 96-18 501401 Cover assembly, CCW 1
J30 96-18 303651 Bushing 1
J50 96-18 056068 O-ring 1
J60 96-18 505116 Flange adaptor, SAE C 1
J70 96-18 664920 (9009625-0132) Washer 4
J80 96-18 338798 (9007314-1625) Screw, M16 x 160 4
J90 96-18 726943 (9004104-0490) O-ring 1
J92 96-18 8800406 Cover plate 1
J95 96-18 9007200-5021 Screw 4

520L0895 • Rev AA • June 2007 67

 Series 90 130 cc Axial Piston Pump
Parts Manual
Variable displacement pump

j15
j0
J10

J60

j90
j50

j15
j0
J70
J10
J80
J95

J70 J60
J97

J70

J80
j50

J70
J70
J90

J97 j15
J80
J92
j0
J95
J10

J60

j90
j50
J92

E100 908E

J70
Enlarged bold type item
J80 numbers are recommended
J95 part to stock for servicing.

68 520L0895 • Rev AA • June 2007

 Series 90 130 cc Axial Piston Pump
Parts Manual
Variable displacement pump

Auxiliary mounting
Order Date Date Qty. per
Code Item Begin End Part Number Part Name Model/Kit
CL J10 96-18 501386 Coupling, 17 tooth 1
J15 96-18 503399 Cover assembly, CW 1
J15 96-18 503397 Cover assembly, CCW 1
J30 96-18 303651 Bushing 1
J50 96-18 056068 O-ring 1
J60 96-18 508407 Flange adaptor, SAE C 1
J70 96-18 664920 (9009625-0132) Washer 4
J80 96-18 338798 (9007314-1625) Screw, M16 x 160 4
J90 96-18 726943 (9004104-0490) O-ring 1
J92 96-18 350678 Cover plate 1
J95 96-18 9007200-6222 Screw 2

CM J10 03-38 705954 Coupling, 21 tooth 1

J15 03-38 513832 Cover assembly, CW 1
J30 03-38 303651 Bushing 1
J50 03-38 056068 O-ring 1
J60 03-38 513617 Flange adaptor, SAE C 1
J70 06-13 664920 Washer 8
J80 03-38 506389 Screw, M16 x 160 4
J90 03-38 8801062 C pad seal 1
J92 03-38 8801060 Cover plate 1
J95 03-38 9007200-5021 Screw 4
J97 03-38 506297 Auxiliary mounting bracket 1

CS J10 96-18 501386 Coupling, 17 tooth 1

J15 96-18 503399 Cover assembly, CW 1
J15 96-18 503397 Cover assembly, CCW 1
J30 96-18 303651 Bushing 1
J50 96-18 056068 O-ring 1
J60 96-18 505116 Flange adaptor, SAE C 1
J70 96-18 664920 (9009625-0132) Washer 4
J80 96-18 338798 (9007314-1625) Screw, M16 x 160 4
J90 96-18 726943 (9004104-0490) O-ring 1
J92 96-18 8800406 Cover plate 1
J95 96-18 9007200-5021 Screw 4

CY J10 96-18 501386 Coupling, 17 tooth 1

J15 96-18 11002215 Cover assembly, CCW 1
J30 96-18 303651 Bushing 1
J50 96-18 056068 O-ring 1
J60 96-18 513617 Flange adaptor, SAE C 1
J70 96-18 664920 (9009625-0132) Washer 4
J80 96-18 338798 (9007314-1625) Screw, M16 x 160 4
J90 96-18 8801062 C pad seal 1
J92 96-18 8801060 Cover plate 1
J95 96-18 9007200-5021 Screw 4

520L0895 • Rev AA • June 2007 69

 Series 90 130 cc Axial Piston Pump
Parts Manual
Variable displacement pump

J40

j15
j0
J10

J60

j50
j90

J70
J80

J95

j15
j0
J10

J60

j50
j90

J70
J80

J95 E100 909E

Enlarged bold type item

numbers are recommended
part to stock for servicing.

70 520L0895 • Rev AA • June 2007

 Series 90 130 cc Axial Piston Pump
Parts Manual
Variable displacement pump

Auxiliary mounting
Order Date Date Qty. per
Code Item Begin End Part Number Part Name Model/Kit
DE & D J 89-41 8302J00D-A Aux. mounting kit, D flange, 13 tooth
J10 89-41 310490 Coupling, 13 tooth 1
J15 89-41 501402 Cover assembly, CW 1
J15 89-41 501401 Cover assembly, CCW 1
J30 89-41 303651 Bushing 1
J40 89-41 92-29 354324 O-ring 1
J50 89-41 056068 O-ring 1
J60 89-41 505118 Flange adaptor, SAE D 1
J70 89-41 664920 (9009625-0132) Washer 4
J80 89-41 338798 (9007314-1625) Screw, M16 x 160 4
J90 89-41 726927 O-ring 1
J92 89-41 338400 Cover plate 1
J95 89-41 9007200-7524 Screw 4

DF J10 96-18 310490 Coupling, 13 tooth 1

J15 96-18 513832 Cover assembly, CW 1
J30 96-18 303651 Bushing 1
J50 96-18 056068 O-ring 1
J60 96-18 505118 Flange adaptor, SAE D 1
J70 96-18 664920 (9009625-0132) Washer 4
J80 96-18 338798 (9007314-1625) Screw, M16 x 160 4
J90 96-18 726927 O-ring 1
J92 96-18 338400 Cover plate 1
J95 96-18 9007200-7524 Screw 4

DG J10 96-18 505444 Coupling, 27 tooth 1

J15 96-18 501402 Cover assembly, CW 1
J15 96-18 501401 Cover assembly, CCW 1
J30 96-18 303651 Bushing 1
J50 96-18 056068 O-ring 1
J60 96-18 505118 Flange adaptor, SAE D 1
J70 96-18 664920 (9009625-0132) Washer 4
J80 96-18 338798 (9007314-1625) Screw, M16 x 160 4
J90 96-18 726927 O-ring 1
J92 96-18 338400 Cover plate 1
J95 96-18 9007200-7524 Screw 4

520L0895 • Rev AA • June 2007 71

 Series 90 130 cc Axial Piston Pump
Parts Manual
Variable displacement pump

j15
j0

j0

J80

B80
B80A
K50 K

E100 910E

Enlarged bold type item

numbers are recommended
part to stock for servicing.

72 520L0895 • Rev AA • June 2007

 Series 90 130 cc Axial Piston Pump
Parts Manual
Variable displacement pump

Auxiliary mounting
Order Date Date Qty. per
Code Item Begin End Part Number Part Name Model/Kit
NN J15 89-41 501400 Cover assembly 1
J30 89-41 303651 Bushing 1
J40 89-41 916940 O-ring 1
J80 89-41 518721 Screw 4

NT J15 96-18 517450 Cover assembly 1

J30 96-18 303651 Bushing 1
J40 96-18 916940 O-ring 1
J80 96-18 518721 Screw 4

NV J15 06-13 501400 Cover assembly 1

J30 06-13 303651 Bushing 1
J40 06-13 680892 (9004104-0440) O-ring 1
J80 06-13 518721 Screw 4

charge pressure relief

14-30 K 89-41 8510272 Charge relief valve kit, 18-30 bar 1
K50 89-41 001156 (9004201-7500) O-ring 1

32-42 K 96-13 8510390 Charge relief valve kit, 30-42 bar 1

K50 96-13 001156 (9004201-7500) O-ring 1

JD K10 96-13 664524 (9005110-9000) Plug assembly 1

K10A 96-13 001156 (9004201-7500) O-ring 1

XX K 89-41 8510272 Charge relief valve kit, 18-30 bar 1

K50 89-41 001156 (9004201-7500) O-ring 1

520L0895 • Rev AA • June 2007 73

 Series 90 130 cc Axial Piston Pump
Parts Manual
Variable displacement pump

L100

L90
L600

L100

L90
th L500

L100

L90
t L80
tn

L100 L1

L90
L600

t

L100

E100 924E
tK
Enlarged bold type item
numbers are recommended
part to stock for servicing.

74 520L0895 • Rev AA • June 2007

 Series 90 130 cc Axial Piston Pump
Parts Manual
Variable displacement pump

shaft
Order Date Date Qty. per
Code Item Begin End Part Number Part Name Model/Kit
C4 L100 03-08 518467 Shaft, 27 tooth spline, 16/32, special* 1
* Used with 8E, 8F or 8J end cap option only.

C8 L100 89-46 303495 Shaft, 27 tooth spline, 16/32 1

D8 L100 89-46 503443 Shaft, 27 tooth spline, 16/32, M10 tapped thread 1

F1 L100 89-46 335695 Shaft, 13 tooth spline, 8/16 1

F4 L100 96-45 518465 Shaft, 13 tooth spline, 8/16, special* 1

* Used with 8E, 8F or 8J end cap option only.

F5 L100 89-46 518828 Shaft, 13 tooth spline, 8/16, 5/8-11 tapped thread 1

F6 L100 89-46 11002449 Shaft, 13 tooth spline, 8/16, special length 1

J5 L100 92-16 506911 Shaft, 13 tooth spline, 8/16, no relief 1

T4 L61 89-46 551424 Cotter pin 1

L80 89-46 9003326-0005 Key 1
L90 89-46 9700189 Slotted nut, 1.25-18 1
L100 89-46 346601 Shaft, 1.75” tapered 1

T7 L90 98-19 508784 Self locking nut, M30 1

L100 98-19 511619 Shaft, 1.75” tapered, no keyway 1
L500 98-19 511628 Washer 1

TH L90 89-46 508784 Self locking nut, M30 1

L100 89-46 508592 Shaft, 1.75 tapered, no keyway 1
L600 510969 Coupling 1

TK L90 06-13 508784 Self locking nut, M30 1

L100 06-13 511619 Shaft, 1.75 tapered, no keyway 1
L200 06-13 511463 Tapered flange 1
L500 06-13 511628 Washer 1

TN L90 06-29 508784 Self locking nut, M30 1

L100 06-29 508784 Shaft, 1.75 tapered, no keyway, special* 1
L500 06-29 511628 Washer 1
* Used with 8E, 8F or 8J end cap option only.

520L0895 • Rev AA • June 2007 75

 Series 90 130 cc Axial Piston Pump
Parts Manual
Variable displacement pump

M1
m1
M90 M90

w01a

m11
m11

m9

M90 m95
M14
m9

m95
m9
m1

m11

E100 716E

Enlarged bold type item

numbers are recommended
part to stock for servicing.

76 520L0895 • Rev AA • June 2007

 Series 90 130 cc Axial Piston Pump
Parts Manual
Variable displacement pump

control
Order Date Date Qty. per
Code Item Begin End Part Number Part Name Model/Kit
CA M1 89-41 8102M0CA-A Control cover plate kit 1
M11 89-41 8800923 Control gasket 1
M90 89-41 693341 (9007314-0606) Screw 6

CB M1 89-41 8102M0CA-A Control cover plate kit 1

M11 89-41 8800923 Control gasket 1
M14 96-40 340091 Feedback link 1
M90 89-41 693341 (9007314-0606) Screw 6

DC M1 89-41 8102M0DC-A 3-position control kit, 12 volt 1

M11 89-41 8800923 Control gasket 1
M90 89-41 693341 (9007314-0606) Screw 6
W701A 89-41 048413 O-ring 4

DD M1 89-41 8102M0DD-A 3-position control kit, 24 volt 1

M11 89-41 8800923 Control gasket 1
M90 89-41 693341 (9007314-0606) Screw 6
W701A 89-41 048413 O-ring 4

EA M1 92-19 8302M0EA-B EDC kit, MS connector 1

M9 92-19 MCV110A1017 PCP, MS connector 1
M11 92-19 8800923 Control gasket 1
M14 92-19 340091 Feedback link 1
M90 92-19 692889 (9007314-0611) Screw 6
M95 92-19 318337 (9004104-0120) O-ring 2
M96 92-19 011304 (9004104-0140) O-ring 1
M97 92-19 318345 (9004104-0240) O-ring 1

520L0895 • Rev AA • June 2007 77

 Series 90 130 cc Axial Piston Pump
Parts Manual
Variable displacement pump

M001
M001A
M005 M001
M005A
M005 T70
T70 T80
T80
M90
M90
M001
M001

m1 T92
m1 T92

M001
M001

M001

m0
M007 m0

m11
m11 M006

fB fG & fh

M90

m1

hd, hf, m11

hm & hs

M001

E100 911E

Enlarged bold type item

numbers are recommended
part to stock for servicing.

78 520L0895 • Rev AA • June 2007

 Series 90 130 cc Axial Piston Pump
Parts Manual
Variable displacement pump

control
Order Date Date Qty. per
Code Item Begin End Part Number Part Name Model/Kit
FB M1 96-41 11015080 NFPE control kit, 24 volt, 25 bar 1
M11 96-41 8800923 Control gasket 1
M20 96-41 518081 Solenoid valve, 24 volt, 25 bar 2
M21 96-41 067694 Screw 4
M90 96-41 348847 Screw 3
M92 96-41 693341 (9007314-0606) Screw 3

FG M1 00-30 11026563 NFPE control kit, 12 volt, 32 bar 1

M11 00-30 8800923 Control gasket 1
M20 00-30 516006 Solenoid valve, 12 volt, 32 bar 2
M90 00-30 348847 Screw 3
M92 00-30 693341 (9007314-0606) Screw 3

FH M1 01-06 11026569 NFPE control kit, 24 volt, 32 bar 1

M11 01-06 8800923 Control gasket 1
M20 01-06 515617 Solenoid valve, 24 volt, 32 bar 2
M21 01-06 067694 Screw 4
M90 01-06 348847 Screw 3
M92 01-06 693341 (9007314-0606) Screw 3

HD M1 96-17 8510164 HDC kit, 8-16.5 bar 1

M11 96-17 501665 Control gasket 1
M14 96-17 340091 Feedback link 1
M90 96-17 692889 (9007314-0611) Screw 6

HF M1 96-17 8302M0HF-A HDC kit, 3-11 bar 1

M11 96-17 8801241 Control gasket (SB-1999-065) 1
M14 96-17 340091 Feedback link 1
M90 96-17 692889 (9007314-0611) Screw 6

HM M1 98-27 8302M0HM-A HDC kit, 1.1 -6.7 bar 1

M11 98-27 8801241 Control gasket (SB-1999-065) 1
M14 98-27 340091 Feedback link 1
M90 98-27 692889 (9007314-0611) Screw 6

HS M1 99-09 11013640 HDC kit, 6-18 bar, high accuracy 1

M11 99-09 8801241 Control gasket (SB-1999-065) 1
M14 99-09 340091 Feedback link 1
M90 99-09 692889 (9007314-0611) Screw 6

520L0895 • Rev AA • June 2007 79

 Series 90 130 cc Axial Piston Pump
Parts Manual
Variable displacement pump

m9

M90
m9

m9
m9 m9

m1

m11

M14

E100 926E

Enlarged bold type item

numbers are recommended
part to stock for servicing.

80 520L0895 • Rev AA • June 2007

 Series 90 130 cc Axial Piston Pump
Parts Manual
Variable displacement pump

control
Order Date Date Qty. per
Code Item Begin End Part Number Part Name Model/Kit
KA M1 95-26 8510119 EDC3 kit, MS connector, dual coil 1
M9 95-26 MCV116G4201 PCP, MS connector, dual coil 1
M11 95-26 8800923 Control gasket 1
M14 95-26 340091 Feedback link 1
M90 95-26 692889 (9007314-0611) Screw 6
M96 95-26 011296 (9004105-0120) O-ring 3
M97 95-26 784686 (9004105-0130) O-ring 1

KC M1 00-44 11018293 EDC kit, MS connector 1

M9 00-44 MCV116C1401 PCP, MS connector 1
M11 00-44 8800923 Control gasket 1
M14 00-44 340091 Feedback link 1
M90 00-44 692889 (9007314-0611) Screw 6
M96 00-44 011296 (9004105-0120) O-ring 3
M97 00-44 784686 (9004105-0130) O-ring 1

KE M1 03-27 8510324 EDC kit, Deutsch connector 1

M9 03-27 MCV116F3118 PCP, Deutsch connector 1
M11 03-27 8800923 Control gasket 1
M14 03-27 340091 Feedback link 1
M90 03-27 692889 (9007314-0611) Screw 6
M96 03-27 011296 (9004105-0120) O-ring 3
M97 03-27 784686 (9004105-0130) O-ring 1

KM M1 98-42 8510242 EDC kit, 4-wire Metripak connector 1

M9 98-42 MCV116G4213 PCP, 4-wire Metripak connector 1
M11 98-42 8800923 Control gasket 1
M14 98-42 340091 Feedback link 1
M90 98-42 692889 (9007314-0611) Screw 6
M96 98-42 011296 (9004105-0120) O-ring 3
M97 98-42 784686 (9004105-0130) O-ring 1

KN M1 06-13 11013631 EDC kit, MS connector 1

M9 06-13 MCV116A3501 PCP, MS connector 1
M11 06-13 8800923 Control gasket 1
M14 06-13 340091 Feedback link 1
M90 06-13 692889 (9007314-0611) Screw 6
M96 06-13 011296 (9004105-0120) O-ring 3
M97 06-13 784686 (9004105-0130) O-ring 1

KP M1 95-26 8510120 EDC kit, Weather-pak connector 1

M9 95-26 MCV116G4204 PCP, Weather-pak connector 1
M11 95-26 8800923 Control gasket 1
M14 95-26 340091 Feedback link 1
M90 95-26 692889 (9007314-0611) Screw 6
M96 95-26 011296 (9004105-0120) O-ring 3
M97 95-26 784686 (9004105-0130) O-ring 1

520L0895 • Rev AA • June 2007 81

 Series 90 130 cc Axial Piston Pump
Parts Manual
Variable displacement pump

m
ma
m9 mB m1

mc M78
m9 m M75
M90
M72
m9 M71
m9 m9 M70
M90
m1 s0

m11
m11

M14

E100 927E

Enlarged bold type item

numbers are recommended
part to stock for servicing.

82 520L0895 • Rev AA • June 2007

 Series 90 130 cc Axial Piston Pump
Parts Manual
Variable displacement pump

control
Order Date Date Qty. per
Code Item Begin End Part Number Part Name Model/Kit
KT M1 06-19 kit #(KVEBB1409) EDC3 kit, Deutsch connector 1
M9 06-19 MCV116G4214 PCP, Duetsch connector 1
M11 06-19 8800923 Control gasket 1
M14 06-19 340091 Feedback link 1
M90 06-19 692889 (9007314-0611) Screw 6
M96 06-19 011296 (9004105-0120) O-ring 3
M97 06-19 784686 (9004105-0130) O-ring 1

LD M1 98-40 8510289 MDC kit, w/neutral start switch, 2-pole 12v solenoid 1
M11 98-40 8800923 Control gasket 1
M14 98-40 340091 Feedback link 1
M70 98-40 9800916 Control handle 1
M71 98-40 689018 (9009660-3100) Toothlock washer 1
M72 98-40 040642 (9003513-0800) Nut 1
M75 98-40 505022 Control manifold 1
M76 98-40 326108 (9700886) Solenoid valve, 12 volt, 2-pole 1
M76A 98-40 001131 (9004201-5000) O-ring 1
M76B 98-40 9006150-0140 Back up ring 1
M76C 98-40 000810 (9004100-0140) O-ring 1
M77 98-40 8800882 Manifold gasket 1
M78 98-40 693341 (9007314-0606) Screw 2
M90 98-40 692889 (9007314-0611) Screw 6
S40 98-40 709014 (8510027) Neutral start switch kit 1

LP M1 04-25 8510375 MDC kit, w/neutral start switch, 2-pole 12v solenoid 1
M11 98-40 8800923 Control gasket 1
M14 98-40 340091 Feedback link 1
M70 98-40 9800916 Control handle 1
M71 98-40 689018 (9009660-3100) Toothlock washer 1
M72 98-40 040642 (9003513-0800) Nut 1
M75 98-40 505022 Control manifold 1
M76 98-40 521242 Solenoid valve, 12 volt, 2-pole 1
M76A 98-40 001131 (9004201-5000) O-ring 1
M76B 98-40 9006150-0140 Back up ring 1
M76C 98-40 000810 (9004100-0140) O-ring 1
M77 98-40 8800882 Manifold gasket 1
M78 98-40 693341 (9007314-0606) Screw 2
M90 98-40 692889 (9007314-0611) Screw 6
S40 98-40 8510316 Neutral start switch kit, high force 1

520L0895 • Rev AA • June 2007 83

 Series 90 130 cc Axial Piston Pump
Parts Manual
Variable displacement pump

m1

M72
M71
M70
M90

s0 M72
M71
M70
M90

m1

m11

m11

M14

E100 928E

Enlarged bold type item

numbers are recommended
part to stock for servicing.

84 520L0895 • Rev AA • June 2007

 Series 90 130 cc Axial Piston Pump
Parts Manual
Variable displacement pump

control
Order Date Date Qty. per
Code Item Begin End Part Number Part Name Model/Kit
MA M1 92-19 8302M0MA-A MDC kit 1
M11 92-19 8800923 Control gasket 1
M14 92-19 340091 Feedback link 1
M70 92-19 9800916 Control handle 1
M71 92-19 689018 (9009660-3100) Toothlock washer 1
M72 92-19 040642 (9003513-0800) Nut 1
M90 92-19 692889 (9007314-0611) Screw 6

MB M1 92-19 8302M0MB-A MDC kit, with neutral start switch 1

M11 92-19 8800923 Control gasket 1
M14 92-19 340091 Feedback link 1
M70 92-19 9800916 Control handle 1
M71 92-19 689018 (9009660-3100) Toothlock washer 1
M72 92-19 040642 (9003513-0800) Nut 1
M90 92-19 692889 (9007314-0611) Screw 6
S40 92-19 80020S40 Neutral start switch kit 1

MV M1 94-24 8510267 MDC kit, with neutral start switch 1

M11 94-24 8800923 Control gasket 1
M14 94-24 340091 Feedback link 1
M70 94-24 9800916 Control handle 1
M71 94-24 689018 (9009660-3100) Toothlock washer 1
M72 94-24 040642 (9003513-0800) Nut 1
M90 94-24 692889 (9007314-0611) Screw 6
S40 94-24 505035 (8510170) Neutral start switch kit 1

NA M1 92-19 8302M0NA-A MDC kit 1

M11 92-19 504733 Control gasket 1
M14 92-19 340091 Feedback link 1
M70 92-19 769075 (8800691) Control handle 1
M71 92-19 689018 (9009660-3100) Toothlock washer 1
M72 92-19 040642 (9003513-0800) Nut 1
M90 92-19 348847 (9007314-0614) Screw 6

520L0895 • Rev AA • June 2007 85

 Series 90 130 cc Axial Piston Pump
Parts Manual
Variable displacement pump

N
N40A

N10
N004
n0
n5a N001
N35
N20 n00

N36 na N25

N97 n15
N43

N100
N43A
n00
N41A
N41
n0
N95 M2
N42A
N30

N42

S
M1

N40A N40A
n0
n0

E100 929E

Enlarged bold type item

numbers are recommended
part to stock for servicing.

86 520L0895 • Rev AA • June 2007

 Series 90 130 cc Axial Piston Pump
Parts Manual
Variable displacement pump

filtration
Order Date Date Qty. per
Code Item Begin End Part Number Part Name Model/Kit
5 N001 99-18 515972 Cover plate 1
N002 99-18 9004104-0320 O-ring 1
N004 99-18 746594 Screw 4

7 N002 02-03 9004104-0320 O-ring 1

N20 02-03 360768 Check valve 1
N30 02-03 365965 Plug 1
N40 02-03 519507/P Filter assembly, long 1
N40A 02-03 000943 (9004100-2300) O-ring 1
N41 02-03 001537 (9005100-8700) Plug assembly 1
N41A 02-03 001149 (9004201-6200) O-ring 1
N42 02-03 140644 Plug assembly 1
N42A 02-03 085043 (9004201-3700) O-ring 1
N43 02-03 140644 Plug assembly 1
N43A 02-03 085043 (9004201-3700) O-ring 1
N95 02-03 500115 Washer 2
N97 02-03 376269 Screw 4
N100 02-03 501831 Filter manifold assembly 1

8 & D None

G N100 03-18 501831 Filter manifold assembly 1

N20 00-01 360768 Check valve 1
N30 00-01 365965 Plug 1
N40 00-01 519506/P Filter assembly, short 1
N40A 02-03 000943 (9004100-2300) O-ring 1
N41 00-01 001537 (9005100-8700) Plug assembly 1
N41A 00-01 001149 (9004201-6200) O-ring 1
N42 00-01 140644 Plug assembly 1
N42A 00-01 085043 (9004201-3700) O-ring 1
N43 00-01 140644 Plug assembly 1
N43A 00-01 085043 (9004201-3700) O-ring 1
N95 00-01 500115 Washer 2
N97 00-01 376269 Screw 4
N98 00-01 9004104-0320 O-ring 1

L N 89-41 317891 Filter manifold kit, with long filter assembly 1

N10 95-18 516639 Filter manifold (SB-1994-036) 1
N15 89-41 001172 (9004201-9000) O-ring 1
N20 95-18 700492 Nut (SB-1994-036) 1
N25 89-41 700302 Tube (SB-1995-018) 1
N35 89-41 140644 Plug assembly 1
N35A 89-41 085043 (9004201-3700) O-ring 1
N36 89-41 140644 Plug assembly 1
N36A 89-41 085043 (9004201-3700) O-ring 1
N40 89-41 519507/P Filter assembly, long 1
N40A 89-41 000943 (9004100-2300) O-ring 1

520L0895 • Rev AA • June 2007 87

 Series 90 130 cc Axial Piston Pump
Parts Manual
Variable displacement pump

N
N40A

N10

n5a n0
N35
N20 n10a
N10
N
N10 N36 na N25

n15

N20
n15
N25
N36 na

M2
na
N37 n10a

S
N10

M1

E100 930E

Enlarged bold type item

numbers are recommended
part to stock for servicing.

88 520L0895 • Rev AA • June 2007

 Series 90 130 cc Axial Piston Pump
Parts Manual
Variable displacement pump

filtration
Order Date Date Qty. per
Code Item Begin End Part Number Part Name Model/Kit
M N10 94-16 140644 Plug assembly 1
N10A 94-16 085043 (9004201-3700) O-ring 1

P N 89-41 359497 Filter manifold kit, with short filter assembly 1

N10 95-18 516639 Filter manifold (SB-1994-036) 1
N15 89-41 001172 (9004201-9000) O-ring 1
N20 95-18 700492 Nut (SB-1994-036) 1
N25 89-41 508451 Tube (SB-1995-018) 1
N35 89-41 140644 Plug assembly 1
N35A 89-41 085043 (9004201-3700) O-ring 1
N36 89-41 140644 Plug assembly 1
N36A 89-41 085043 (9004201-3700) O-ring 1
N40 89-41 519506/P Filter assembly, short 1
N40A 89-41 000943 (9004100-2300) O-ring 1

R N 89-41 359562 (8302N00R-A) Filter manifold kit, remote 1

N10 89-41 350777 Filter manifold 1
N15 89-41 001172 (9004201-9000) O-ring 1
N20 89-41 700492 (9002863-1600) Nut 1
N25 89-41 508450 Tube (SB-1995-018) 1
N36 89-41 140644 Plug assembly 1
N36A 89-41 085043 (9004201-3700) O-ring 1

S N10 89-41 707554 Reducer assembly 1

N10A 89-41 001172 (9004201-9000) O-ring 1
N37 89-41 140644 Plug assembly 1
N37A 89-41 085043 (9004201-3700) O-ring 1

520L0895 • Rev AA • June 2007 89

 Series 90 130 cc Axial Piston Pump
Parts Manual
Variable displacement pump

P80
P80
P80 p0a
p0a P80

p0a p0a P70

P70 P70 P70

View “A” with View “A” with

pressure limiters, pressure limiters,
left hand rotation, right hand rotation,
Options 1, 5, & 6 Options 1, 5, & 6

P80
P80

P80 P80
P80 P80

p0a p0a
P70 P70
View “A” without View “A” with
pressure limiters, pressure limiter port A,
left/right hand rotation HPRV port B,
Option 2 & 7 right hand rotation only
Option B

pB1
View “a”
p

p
p1
p

p
pa1 p1

E100 931E

Enlarged bold type item

numbers are recommended
part to stock for servicing.

90 520L0895 • Rev AA • June 2007

 Series 90 130 cc Axial Piston Pump
Parts Manual
Variable displacement pump

High pressure regulation

Order Date Date Qty. per
Code Item Begin End Part Number Part Name Model/Kit
P2 89-41 775080 O-ring 2
P6 89-41 360784 (9004105-0290) O-ring 2
P13 89-41 775155 O-ring 2

1 P2A1 89-41 8510023-1 Multi-function valve kit (SB-1991-014) 1

P2B1 89-41 8510023-1 Multi-function valve kit (SB-1991-014) 1
P70 89-41 8800188 Check valve 2
P70A 89-41 001123 (9004201-2500) O-ring 2
P80 89-41 9005475-0004 Special plug 2

2 P2A1 89-41 8510023-2 Multi-function valve kit (SB-1991-014) 1

P2B1 89-41 8510023-2 Multi-function valve kit (SB-1991-014) 1
P70 89-41 327007 (9005110-4400) Plug (SB-1989-003) 1
P70A 89-41 001123 (9004201-2500) O-ring 1
P80 89-41 9005475-0004 Special plug 3

4 P2A1 03-28 8510023-7 Multi-function valve kit (SB-1991-014) 1

P2B1 03-28 8510023-7 Multi-function valve kit (SB-1991-014) 1

5 P2A1 98-02 8510274 Multi-function valve kit (SB-1991-014) 1

P2B1 98-02 8510274 Multi-function valve kit (SB-1991-014) 1
P70 98-02 8800188 Check valve 2
P70A 98-02 001123 (9004201-2500) O-ring 2
P80 98-02 9005475-0004 Special plug 2

6 P2A1 93-26 8510023-6 Multi-function valve kit (SB-1991-014) 1

P2B1 93-26 8510023-6 Multi-function valve kit (SB-1991-014) 1
P70 93-26 8800188 Check valve 2
P70A 93-26 001123 (9004201-2500) O-ring 2
P80 93-26 9005475-0004 Special plug 2

7 P2A1 89-41 8510022-7 Multi-function valve kit (SB-1991-014) 1

P2B1 89-41 8510022-7 Multi-function valve kit (SB-1991-014) 1
P70 89-41 327007 (9005110-4400) Plug (SB-1989-003) 1
P70A 89-41 001123 (9004201-2500) O-ring 1
P80 89-41 9005475-0004 Special plug 3

A P2A1 89-41 8510359 Multi-function valve kit (SB-1991-014) 1

P2B1 89-41 8510359 Multi-function valve kit (SB-1991-014) 1

B P2A1 99-09 8510023-1 Multi-function valve kit (SB-1991-014) 1

P2B1 99-09 8510023-7 Multi-function valve kit (SB-1991-014) 1
P70 99-09 8800188 Check valve 1
P70A 99-09 001123 (9004201-2500) O-ring 1
P80 99-09 9005475-0004 Special plug 3

520L0895 • Rev AA • June 2007 91

 Series 90 130 cc Axial Piston Pump
Parts Manual
Variable displacement pump

P80
P80
P80 p0a
p0a P80

p0a p0a P70

P70 P70 P70

View “A” with View “A” with

pressure limiters, pressure limiters,
left hand rotation, right hand rotation,
Options F, G, and P Options F, G, and P

p0a

P70
p0a
P70

View “A” with

pressure limiters,
special applications only,
Options V and Z

pB1
View “a”
p

p
p1
p

p
pa1 p1

E100 932E

Enlarged bold type item

numbers are recommended
part to stock for servicing.

92 520L0895 • Rev AA • June 2007

 Series 90 130 cc Axial Piston Pump
Parts Manual
Variable displacement pump

High pressure regulation

Order Date Date Qty. per
Code Item Begin End Part Number Part Name Model/Kit
P2 89-41 141564 (9004100-0170) O-ring 2
P6 89-41 000836 (9004100-0200) O-ring 2
P13 89-41 544742 (9004105-0190) O-ring 2

D P2A1 97-40 8510187 Multi-function valve kit (SB-1991-014) 1

P2B1 97-40 8510187 Multi-function valve kit (SB-1991-014) 1

F P2A1 94-39 8510023-2 Multi-function valve kit (SB-1991-014) 1

P2B1 94-39 8510023-2 Multi-function valve kit (SB-1991-014) 1
P70 94-39 8800188 Check valve 2
P70A 94-39 001123 (9004201-2500) O-ring 2
P80 94-39 9005475-0004 Special plug 2

G P2A1 99-06 8510239 Multi-function valve kit (SB-1991-014) 1

P2B1 99-06 8510239 Multi-function valve kit (SB-1991-014) 1
P70 99-06 8800188 Check valve 2
P70A 99-06 001123 (9004201-2500) O-ring 2
P80 99-06 9005475-0004 Special plug 2

P P2A1 99-10 513827 Multi-function valve 1

P2B1 99-10 513827 Multi-function valve 1
P70 99-10 8800188 Check valve 2
P70A 99-10 001123 (9004201-2500) O-ring 2
P80 99-10 9005475-0004 Special plug 2

V P2A1 02-30 8510240 Multi-function valve kit 1

P2B1 02-30 8510240 Multi-function valve kit 1
P70 02-30 8800188 Check valve 2
P70A 02-30 001123 (9004201-2500) O-ring 2

Z P2A1 04-12 8510022-1 Multi-function valve kit 1

P2B1 04-12 8510022-1 Multi-function valve kit 1
P70 04-12 8800188 Check valve 2
P70A 04-12 001123 (9004201-2500) O-ring 2

520L0895 • Rev AA • June 2007 93

 Series 90 130 cc Axial Piston Pump
Parts Manual
Variable displacement pump

View “a”
edc mdc

View “a” View “a”

T50 T70 T80 T60
T T30
[M5] [M5]
[M8] T40 [M8]

View “a”
hdc

T50 T60
View “a”
[M8] [M8]
T T30 T80
T70
T40
[M8]
[M8]

View “a” roller

control

T70 T80
T30
View “a”
[M6] T
[M6]
T40

E100 933E

94 520L0895 • Rev AA • June 2007

 Series 90 130 cc Axial Piston Pump
Parts Manual
Variable displacement pump

orifice
Order Date Date Qty. per
Code Item Begin End Part Number Part Name Model/Kit
00 None

01 T 89-41 8002T001-A Control orifice kit, .018” 1

T30 89-41 679506 (8700007) Spring 1
T40 89-41 8801303 Spring retainer 1

02 T 89-41 8002T002-A Control orifice kit, .026” 1

T30 89-41 679506 (8700007) Spring 1
T40 89-41 8801303 Spring retainer 1

03 T 89-41 8002T003-A Control orifice kit, .032” 1

T30 89-41 679506 (8700007) Spring 1
T40 89-41 8801303 Spring retainer 1

04 T 89-41 8002T004-A Control orifice kit, .040” 1

T30 89-41 679506 (8700007) Spring 1
T40 89-41 8801303 Spring retainer 1

05 T 89-41 8002T005-A Control orifice kit, .054” 1

T30 89-41 679506 (8700007) Spring 1
T40 89-41 8801303 Spring retainer 1

06 T 89-41 8002T006-A Control orifice kit, .062” 1

T30 89-41 679506 (8700007) Spring 1
T40 89-41 8801303 Spring retainer 1

09 T 89-41 8002T009-A Control orifice kit, .092” 1

T30 89-41 679506 (8700007) Spring 1
T40 89-41 8801303 Spring retainer 1

21 T 89-41 8002T004-A Control orifice kit, .040” 1

T30 89-41 679506 (8700007) Spring 1
T40 89-41 8801303 Spring retainer 1
T70 89-41 714477 Orifice plug, 0.8mm, M8 x 8 1
T80 89-41 714477 Orifice plug, 0.8mm, M8 x 8 1

22 T 89-41 8002T022-A Control orifice kit, .022” 1

T30 89-41 679506 (8700007) Spring 1
T40 89-41 8801303 Spring retainer 1

23 T 89-41 8002T003-A Control orifice kit, .032” 1

T30 89-41 679506 (8700007) Spring 1
T40 89-41 8801303 Spring retainer 1
T50 89-41 639153 Orifice plug, 1.3mm, M5 x 6 1
T60 89-41 639153 Orifice plug, 1.3mm, M5 x 6 1

520L0895 • Rev AA • June 2007 95

 Series 90 130 cc Axial Piston Pump
Parts Manual
Variable displacement pump

View “a”
edc

View “a”

T50 T70 T80 T60 mdc

T T30
[M5] [M5]
[M8] T40 [M8]

View “a”

View “a”

E100 934E

96 520L0895 • Rev AA • June 2007

 Series 90 130 cc Axial Piston Pump
Parts Manual
Variable displacement pump

orifice
Order Date Date Qty. per
Code Item Begin End Part Number Part Name Model/Kit
25 T 89-41 8002T002-A Control orifice kit, .026” 1
T30 89-41 679506 (8700007) Spring 1
T40 89-41 8801303 Spring retainer 1
T50 89-41 606657 Orifice plug, 0.5mm, M5 x 6 1
T60 89-41 606657 Orifice plug, 0.5mm, M5 x 6 1
T70 89-41 716837 Orifice plug, 0.6mm, M8 x 8 1
T80 89-41 716837 Orifice plug, 0.6mm, M8 x 8 1

26 T 89-41 8002T003-A Control orifice kit, .032” 1

T30 89-41 679506 (8700007) Spring 1
T40 89-41 8801303 Spring retainer 1
T50 89-41 598292 Orifice plug, 0.8mm, M5 x 6 1
T60 89-41 598292 Orifice plug, 0.8mm, M5 x 6 1

27 T 89-41 8002T004-A Control orifice kit, .040” 1

T30 89-41 679506 (8700007) Spring 1
T40 89-41 8801303 Spring retainer 1
T50 89-41 598292 Orifice plug, 0.8mm, M5 x 6 1
T60 89-41 598292 Orifice plug, 0.8mm, M5 x 6 1

28 T 89-41 8002T002-A Control orifice kit, .026” 1

T30 89-41 679506 (8700007) Spring 1
T40 89-41 8801303 Spring retainer 1
T50 89-41 639104 Orifice plug, 0.7mm, M5 x 6 1
T60 89-41 639104 Orifice plug, 0.7mm, M5 x 6 1
T70 89-41 704650 Orifice plug, 0.7mm, M8 x 8 1
T80 89-41 704650 Orifice plug, 0.7mm, M8 x 8 1

29 T 89-41 8002T003-A Control orifice kit, .032” 1

T30 89-41 679506 (8700007) Spring 1
T40 89-41 8801303 Spring retainer 1
T50 89-41 639104 Orifice plug, 0.7mm, M5 x 6 1
T60 89-41 639104 Orifice plug, 0.7mm, M5 x 6 1

30 T 89-41 8002T002-A Control orifice kit, .026” 1

T30 89-41 679506 (8700007) Spring 1
T40 89-41 8801303 Spring retainer 1
T50 89-41 639153 Orifice plug, 1.3mm, M5 x 6 1
T60 89-41 639153 Orifice plug, 1.3mm, M5 x 6 1
T70 89-41 704650 Orifice plug, 0.7mm, M8 x 8 1
T80 89-41 704650 Orifice plug, 0.7mm, M8 x 8 1

32 T50 89-41 639120 Orifice plug, 1.0mm, M5 x 6 1

T60 89-41 639153 Orifice plug, 1.3mm, M5 x 6 1

33 T50 89-41 639153 Orifice plug, 1.3mm, M5 x 6 1

T60 89-41 639153 Orifice plug, 1.3mm, M5 x 6 1

520L0895 • Rev AA • June 2007 97

 Series 90 130 cc Axial Piston Pump
Parts Manual
Variable displacement pump

View “a”
edc mdc

View “a” View “a”

T50 T70 T80 T60
T T30
[M5] [M5]
[M8] T40 [M8]

View “a”
hdc

T50 T60
View “a”
[M8] [M8]
T T30 T80
T70
T40
[M8]
[M8]

E100 935E

98 520L0895 • Rev AA • June 2007

 Series 90 130 cc Axial Piston Pump
Parts Manual
Variable displacement pump

orifice
Order Date Date Qty. per
Code Item Begin End Part Number Part Name Model/Kit
34 T70 89-41 755793 Orifice plug, 1.0mm, M8 x 8 1
T80 89-41 755793 Orifice plug, 1.0mm, M8 x 8 1

37 T 89-41 8002T005-A Control orifice kit, .054” 1

T30 89-41 679506 (8700007) Spring 1
T40 89-41 8801303 Spring retainer 1
T50 89-41 639120 Orifice plug, 1.0mm, M5 x 6 1
T60 89-41 639120 Orifice plug, 1.0mm, M5 x 6 1

38 T 89-41 8002T002-A Control orifice kit, .026” 1

T30 89-41 679506 (8700007) Spring 1
T40 89-41 8801303 Spring retainer 1
T70 89-41 716837 Orifice plug, 0.6mm, M8 x 8 1
T80 89-41 716837 Orifice plug, 0.6mm, M8 x 8 1

44 T 89-41 8002T005-A Control orifice kit, .054” 1

T30 89-41 679506 (8700007) Spring 1
T40 89-41 8801303 Spring retainer 1
T50 89-41 598292 Orifice plug, 0.8mm, M5 x 6 1
T60 89-41 598292 Orifice plug, 0.8mm, M5 x 6 1

45 T 89-41 8002T003-A Control orifice kit, .032” 1

T30 89-41 679506 (8700007) Spring 1
T40 89-41 8801303 Spring retainer 1
T50 89-41 639153 Orifice plug, 1.3mm, M5 x 6 1
T60 89-41 598292 Orifice plug, 0.8mm, M5 x 6 1

46 T 89-41 8002T002-A Control orifice kit, .026” 1

T30 89-41 679506 (8700007) Spring 1
T40 89-41 8801303 Spring retainer 1
T50 89-41 598292 Orifice plug, 0.8mm, M5 x 6 1
T60 89-41 598292 Orifice plug, 0.8mm, M5 x 6 1

48 T 89-41 8002T003-A Control orifice kit, .032” 1

T30 89-41 679506 (8700007) Spring 1
T40 89-41 8801303 Spring retainer 1
T50 89-41 598292 Orifice plug, 0.8mm, M5 x 6 1
T60 89-41 598292 Orifice plug, 0.8mm, M5 x 6 1
T70 89-41 714477 Orifice plug, 0.8mm, M8 x 8 1
T80 89-41 714477 Orifice plug, 0.8mm, M8 x 8 1

49 T 89-41 8002T003-A Control orifice kit, .032” 1

T30 89-41 679506 (8700007) Spring 1
T40 89-41 8801303 Spring retainer 1
T50 89-41 639120 Orifice plug, 1.0mm, M5 x 6 1
T60 89-41 639120 Orifice plug, 1.0mm, M5 x 6 1

520L0895 • Rev AA • June 2007 99

 Series 90 130 cc Axial Piston Pump
Parts Manual
Variable displacement pump

T80
T50
T70 [M6]
[M6]
T
[M6] A B
P

fnr
control View “B”

T T30
T40
View “a”

View “a”

roller
control

T70 T80
T30
View “a”
[M6] T
[M6]
T40

T70
T80 [M6]
[M6]

nfpe
control

T50

[M6]
E100 936E

100 520L0895 • Rev AA • June 2007

 Series 90 130 cc Axial Piston Pump
Parts Manual
Variable displacement pump

orifice
Order Date Date Qty. per
Code Item Begin End Part Number Part Name Model/Kit
50 T 89-41 8002T002-A Control orifice kit, .026” 1
T30 89-41 679506 (8700007) Spring 1
T40 89-41 8801303 Spring retainer 1
T50 89-41 310771 Orifice plug, 1.2mm, M6 x 6 1
T70 89-41 517571 Orifice plug, 0.9mm, M6 x 6 1
T80 89-41 517571 Orifice plug, 0.9mm, M6 x 6 1

82 T50 89-41 310771 Orifice plug, 1.2mm, M6 x 6 1

T70 89-41 310771 Orifice plug, 1.2mm, M6 x 6 1
T80 89-41 310771 Orifice plug, 1.2mm, M6 x 6 1

84 T70 89-41 310771 Orifice plug, 1.2mm, M6 x 6 1

T80 89-41 310771 Orifice plug, 1.2mm, M6 x 6 1

A5 T 89-41 8002T004-A Control orifice kit, .040” 1

T30 89-41 679506 (8700007) Spring 1
T40 89-41 8801303 Spring retainer 1
T70 89-41 578542 Orifice plug, 0.8mm, M6 x 8 1
T80 89-41 578542 Orifice plug, 0.8mm, M6 x 8 1

A8 T 89-41 8002T004-A Control orifice kit, .040” 1

T30 89-41 679506 (8700007) Spring 1
T40 89-41 8801303 Spring retainer 1
T70 89-41 508014 Orifice plug, 1.0mm, M6 x 8 1
T80 89-41 508014 Orifice plug, 1.0mm, M6 x 8 1

B1 T50 89-41 507042 Orifice plug, 1.5mm, M6 x 8 1

B2 T70 89-41 310771 Orifice plug, 1.2mm, M6 x 6 1

T80 89-41 310771 Orifice plug, 1.2mm, M6 x 6 1

B7 T50 89-41 578542 Orifice plug, 0.8mm, M6 x 8 1

B8 T50 89-41 508014 Orifice plug, 1.0mm, M6 x 8 1

B9 T50 89-41 516598 Orifice plug, 1.2mm, M6 x 8 1

BA T50 89-41 516598 Orifice plug, 1.2mm, M6 x 8 1

T70 89-41 507042 Orifice plug, 1.5mm, M6 x 8 1
T80 89-41 507042 Orifice plug, 1.5mm, M6 x 8 1

520L0895 • Rev AA • June 2007 101

 Series 90 130 cc Axial Piston Pump
Parts Manual
Variable displacement pump

View “a”
mdc

View “a”
T50 T70 T80 T60
T T30
[M5] [M5]
[M8] T40 [M8]

View “a”

roller
control

T70 T80 View “a”

T T30
[M6] [M6]
T40

T50
T80 View “B”
T70 [M6]
[M6]
T
[M6] A B
P

View “B”
fnr
control

T T30
T40 View “a” View “a”
E100 937E

102 520L0895 • Rev AA • June 2007

 Series 90 130 cc Axial Piston Pump
Parts Manual
Variable displacement pump

orifice
Order Date Date Qty. per
Code Item Begin End Part Number Part Name Model/Kit
C4 T50 89-41 639161 Orifice plug, 1.4 mm, M5 x 6 1
T60 89-41 639161 Orifice plug, 1.4 mm, M5 x 6 1

C5 T 89-41 8002T003-A Control orifice kit, .032” 1

T30 89-41 679506 (8700007) Spring 1
T40 89-41 8801303 Spring retainer 1
T50 89-41 639161 Orifice plug, 1.4 mm, M5 x 6 1
T60 89-41 639161 Orifice plug, 1.4 mm, M5 x 6 1

C6 T 89-41 8002T004-A Control orifice kit, .040” 1

T30 89-41 679506 (8700007) Spring 1
T40 89-41 8801303 Spring retainer 1
T50 89-41 639161 Orifice plug, 1.4 mm, M5 x 6 1
T60 89-41 639161 Orifice plug, 1.4 mm, M5 x 6 1

C7 T 89-41 8002T005-A Control orifice kit, .054” 1

T30 89-41 679506 (8700007) Spring 1
T40 89-41 8801303 Spring retainer 1
T50 89-41 639161 Orifice plug, 1.4 mm, M5 x 6 1
T60 89-41 639161 Orifice plug, 1.4 mm, M5 x 6 1

D1 T 89-41 8002T005-A Control orifice kit, .054” 1

T30 89-41 679506 (8700007) Spring 1
T40 89-41 8801303 Spring retainer 1
T70 89-41 043356 Orifice plug, 0.9mm, M6 x 8 1
T60 89-41 043356 Orifice plug, 0.9mm, M6 x 8 1

G1 T50 89-41 310771 Orifice plug, 1.2 mm, M6 x 6 1

G4 T 89-41 8002T001-A Control orifice kit, .018” 1

T30 89-41 679506 (8700007) Spring 1
T40 89-41 8801303 Spring retainer 1
T50 89-41 310771 Orifice plug, 1.2 mm, M6 x 6 1

G8 T 89-41 8002T002-A Control orifice kit, .026” 1

T30 89-41 679506 (8700007) Spring 1
T40 89-41 8801303 Spring retainer 1
T50 89-41 310771 Orifice plug, 1.2 mm, M6 x 6 1

GB T 87-42 8002T003-A Control orifice kit, .032” 1

T30 87-42 679506 (8700007) Spring 1
T40 87-42 8801303 Spring retainer 1
T50 87-42 310771 Orifice plug, 1.2 mm, M6 x 6 1

GD T 87-42 8002T006-A Control orifice kit, .062” 1

T30 87-42 679506 (8700007) Spring 1
T40 87-42 8801303 Spring retainer 1
T50 87-42 310771 Orifice plug, 1.2 mm, M6 x 6 1

520L0895 • Rev AA • June 2007 103

 Series 90 130 cc Axial Piston Pump
Parts Manual
Variable displacement pump

View “B”
T80
T50
T70 [M6]
[M6]
T
[M6] A B
P

View “B”
fnr
control

T30
T View “a” View “a”
T40

View “a”

edc

View “a”
T50 T70 T80 T60
T T30
[M5] [M5]
[M8] T40 [M8]

E100 938E

104 520L0895 • Rev AA • June 2007

 Series 90 130 cc Axial Piston Pump
Parts Manual
Variable displacement pump

orifice
Order Date Date Qty. per
Code Item Begin End Part Number Part Name Model/Kit
GF T 87-42 8002T004-A Control orifice kit, .040” 1
T30 87-42 679506 (8700007) Spring 1
T40 87-42 8801303 Spring retainer 1
T50 87-42 310771 Orifice plug, 1.2 mm, M6 x 6 1

GJ T 87-42 8002T005-A Control orifice kit, .054” 1

T30 87-42 679506 (8700007) Spring 1
T40 87-42 8801303 Spring retainer 1
T50 87-42 310771 Orifice plug, 1.2 mm, M6 x 6 1

K1 T 87-42 8002T005-A Control orifice kit, .054” 1

T30 87-42 679506 (8700007) Spring 1
T40 87-42 8801303 Spring retainer 1
T50 87-42 639153 Orifice plug, 1.3mm, M5 x 6 1
T60 87-42 639153 Orifice plug, 1.3mm, M5 x 6 1

K2 T 87-42 8002T003-A Control orifice kit, .032” 1

T30 87-42 679506 (8700007) Spring 1
T40 87-42 8801303 Spring retainer 1
T50 87-42 639104 Orifice plug, 0.7mm, M5 x 6 1
T60 87-42 639104 Orifice plug, 0.7mm, M5 x 6 1

Z3 T 87-42 8002T004-A Control orifice kit, .040” 1

T30 87-42 679506 (8700007) Spring 1
T40 87-42 8801303 Spring retainer 1
T50 87-42 519659 Orifice plug, 1.0mm, M6 x 6 1
T60 87-42 6519659 Orifice plug, 1.0mm, M6 x 6 1

520L0895 • Rev AA • June 2007 105

 Series 90 130 cc Axial Piston Pump
Parts Manual
Variable displacement pump

overhaul seal kit

Order Date Date Qty. per
Code Item Begin End Part Number Part Name Model/Kit
89-41 714741 Overhaul seal kit 1
B70A 89-41 085043 (9004201-3700) O-ring 1
B72A 89-41 085043 (9004201-3700) O-ring 1
B73A 89-41 085043 (9004201-3700) O-ring 1
B80A 89-41 001172 (9004201-9000) O-ring 1
B82A 89-41 085043 (9004201-3700) O-ring 1
B83A 89-41 085043 (9004201-3700) O-ring 1
B84A 89-41 526533 O-ring 1
B85A 89-41 526533 O-ring 1
C70 89-41 308643 Screw 4
E40 89-41 042432 Seal nut 2
E50 89-41 517379 O-ring 1
E60 89-41 517230 Screw (SB-2002-014) 6
E70A 89-41 001172 (9004201-9000) O-ring 1
F11 89-41 628396 O-ring 2
F11 89-41 754150 O-ring 2
F12 89-41 507800 Piston ring 2
F12 89-41 754168 Piston ring 2
F40 89-41 354316 O-ring 2
F50 89-41 552224 (9004104-0360) O-ring 2
F112 89-41 042432 Seal nut, M10 1
F212 89-41 042432 Seal nut, M10 1
G11A 89-41 085043 (9004201-3700) O-ring 1
G12A 89-41 039297 (9004201-1200) O-ring 1
G13A 89-41 039297 (9004201-1200) O-ring 1
G14A 89-41 039297 (9004201-1200) O-ring 1
G15A 89-41 039297 (9004201-1200) O-ring 1
G16A 89-41 039297 (9004201-1200) O-ring 1
G17A 89-41 039297 (9004201-1200) O-ring 1
G18A 89-41 039297 (9004201-1200) O-ring 1
G19A 89-41 039297 (9004201-1200) O-ring 1
G30 89-41 730895 End cap gasket 1
G45A 89-41 085043 (9004201-3700) O-ring 1
G46A 89-41 085043 (9004201-3700) O-ring 1
G47A 89-41 085043 (9004201-3700) O-ring 1
G51A 89-41 001123 (9004201-2500) O-ring 1
G53A 89-41 085043 (9004201-3700) O-ring 1
G54A 89-41 085043 (9004201-3700) O-ring 1
G55A 89-41 9004201-1900 O-ring 1
G56A 89-41 001123 (9004201-2500) O-ring 1
G111A 89-41 039297 (9004201-1200) O-ring 1
G112A 89-41 039297 (9004201-1200) O-ring 1
G114A 89-41 9004201-1900 O-ring 1
G116A 89-41 085043 (9004201-3700) O-ring 1
H90A 89-41 093823 o-RING 1
J40 89-41 916940 O-ring 1
J50 89-41 505068 O-ring 1

106 520L0895 • Rev AA • June 2007

 Series 90 130 cc Axial Piston Pump
Parts Manual
Notes

overhaul seal kit (continued)

Order Date Date Qty. per
Code Item Begin End Part Number Part Name Model/Kit
J90 89-41 726950 (9004104-0420) O-ring 1
J90 89-41 726935 (9004104-0450) O-ring 1
J90 89-41 726943 (9004104-0490) O-ring 1
J90 89-41 726927 O-ring 1
K50 89-41 001156 (9004201-7500) O-ring 1
L40 07-10 519021 Lip seal 1
L40 89-41 07-09 9008000-0114 Lip seal (SB-2007-008) 1
L50 89-41 509353 O-ring 1
M11 89-41 8800923 Control gasket 1
M11 92-15 8801241 Control gasket (SB-1999-065) 1
M11 89-41 504733 Control gasket 1
M77 89-41 8800882 Manifold gasket 1
M95 89-41 318337 (9004104-0120) O-ring 2
M96 89-41 011304 (9004104-0140) O-ring 1
M96 89-41 011296 (9004105-0120) O-ring 3
M97 89-41 784686 (9004105-0130) O-ring 1
M97 89-41 318345 (9004104-0240) O-ring 1
N15 89-41 001172 (9004201-9000) O-ring 1
P2 89-41 775080 O-ring 2
P6 89-41 360784 (9004105-0290) O-ring 2
P13 89-41 775155 O-ring 2
P70A 89-41 001123 (9004201-2500) O-ring 2
W701 89-41 048413 O-ring 4

520L0895 • Rev AA • June 2007 107

 Series 90 130 cc Axial Piston Pump
Parts Manual
BLN-10107

To improve efficiency and reliability, the number of parts in series 90 pumps is being reduced. The charge pump design
on 55 cc - 130 cc frame sizes is being changed so that the outer port plate is an integral part of the charge pump cover
and distance plates are eliminated. The change is taking effect at the following manufacturing dates:

55 cc: 93-10 75 cc: 93-10 100 cc: 93-15 130 cc: 93-34

For auxiliary pad options, the new charge pump cover is rotation dependent. The cover will be marked as either left
hand (L) or right hand (R). The non-auxiliary pad cover is not rotation dependent.

The charge pump shaft also changes and must be replaced when using the new style hardware. The complete charge
pump assembly can be interchanged with corresponding hardware from 89-17 and beyond. However, piece parts are
not interchangeable. For units prior to 89-17, consult Sauer-Danfoss.

The old design charge pump hardware is obsolete and is no longer available. Refer to the chart on the next page to
determine the replacement kit.

108 520L0895 • Rev AA • June 2007

 Series 90 130 cc Axial Piston Pump
Parts Manual
BLN-10107

The following information must be known to determine the correct charge pump replacement kit:
1. Unit size (055, 075, 100, or 130 cc)
2. Charge pump displacement (11, 14, 17, 20, 26, or 34 cc)
3. Auxiliary pad (Yes or No)
4. Rotation (LH or RH)

Obsoleted Charge Pump Parts Chg. pump

Auxilary Replacement
Unit Size displace- Rotation
pad Kit
Gear Set Shaft Cover ment
8800513 No LH or RH 8510028
8000169 8000174 8800514 055 11 cc Yes LH 8510029
8800514 Yes RH 8510030
8800513 No LH or RH 8510031
8000170 8000174 8800514 055 14 cc Yes LH 8510032
8800514 Yes RH 8510033
8800513 No LH or RH 8510034
8000171 8000174 8800514 055 17 cc Yes LH 8510035
8800514 Yes RH 8510036

8800513 No LH or RH 8510037
8100313 337956 8800514 075 14 cc Yes LH 8510038
8800514 Yes RH 8510039
8800513 No LH or RH 8510040
8100314 337956 8800514 075 17 cc Yes LH 8510041
8800514 Yes RH 8510042
8800513 No LH or RH 8510043
8100315 337956 8800514 075 20 cc Yes LH 8510044
8800514 Yes RH 8510045

8800513 No LH or RH 8510046
8200158 337956 8800514 100 17 cc Yes LH 8510047
8800514 Yes RH 8510048
8800513 No LH or RH 8510049
8200159 337956 8800514 100 20 cc Yes LH 8510050
8800514 Yes RH 8510051
8800513 No LH or RH 8510052
8200160 337956 8800514 100 26 cc Yes LH 8510053
8800514 Yes RH 8510054

347518 No LH or RH 8510064
714444 303636 347526 130 20 cc Yes LH 8510065
347526 Yes RH 8510066
347518 No LH or RH 8510067
714451 303636 347526 130 26 cc Yes LH 8510068
347526 Yes RH 8510069
347518 No LH or RH 8510070
714469 303636 347526 130 34 cc Yes LH 8510071
347526 Yes RH 8510072

520L0895 • Rev AA • June 2007 109

 Series 90 130 cc Axial Piston Pump
Parts Manual
Service Bulletin: SB-1991-014

products affected Series 90130 cc variable pumps

subject Multi-function valve installation torque

description To avoid damaging the multi-function valve cartridge used on 130cc variable pumps, the
torque has been lowered from 206 lbf•ft (279 Nm) to 155 lbf•ft (210 Nm).

The series 90 service manual will be changed to show the lower installation torque at its
next revision.

models affected All 97-2xxx pumps

serial numbers All

part numbers All

affected

parts disposition Not applicable

110 520L0895 • Rev AA • June 2007

 Series 90 130 cc Axial Piston Pump
Parts Manual
Service Bulletin: SB-1992-003A

products affected Series 90: 55, 75,100.130 cc pumps

subject Block point change: components redesign

description As part of our overall series 90 product improvement program, numerous components
are being redesigned. This redesign is referred to as a “block point” change. The objective
of the block point change is to minimize the number of times we change the units while
we convert to high volume tooling at various plant sites. These design improvements
will provide increased reliability and more application flexibility. The nature of these
changes makes customer requalification unnecessary. Old style (pre-block point) variable
housings and end caps will no longer be available as spare parts.

frame size: 130 cc

Pre “blockpoint” New Part Number
Item Description Part Number (92-19 & Later)

Common Parts Group, 130 cc
B10 Variable housing 700237(O) 8510060
E10 Side cover 340133 746107
E20 Leveler 701037 730143
E30 Guide post 340117 746255
E40 Screw 364489 (4) 042432 (2) Seal Nut
B82 Plug n/a 9005110-5600

End Cap Group, 130 cc

G308 End Cap gasket 709816(I)(O) 730895(I)
G908 Screw 376624 713719
G958 Screw 527218 9007314-0811

Special Hardware Features Group, 130 cc

B83 Plug-Speed Pick-up n/a 9005110-5600

Control Group, 130 cc

All Control Types-Delete The Following Parts:
M810 Plate 738203(O) N/A
M820 O-ring 9004104-0440 N/A
M830 O-ring 9004100-0220 N/A
M840 O-ring 9004101-0130 N/A
M860 Screw 345496 N/A
M870 Plug 9005100-4400 N/A
M880 Washer 723981 N/A
Warning: On 130cc
pumps, “pre” and “Post”(I) Interchangeable
blockpoint controls are not(O) Obsolete
interchangeable due to
different length control pins.

520L0895 • Rev AA • June 2007 111

 Series 90 130 cc Axial Piston Pump
Parts Manual
Service Bulletin: SB-1992-003A

Warning: On 130cc pumps, “pre” and “Post” blockpoint controls (MDC’s, HDC’s and
EDC’s) are not interchangeable due to different length control pins. Ensure positive pin
engagement. Failure to do so may result in pump output, and the vehicle may move.

Pre-Block Point Post-Block Point

1.13 in 0.89 in
(28.7 mm) (22.7 mm)

Controls, 130 cc
Module Pre “blockpoint” New Part Number
Groups Description Part Number (92-19 & Later)
MEA EDC kit MS connector MCV111B1302 See EC Group
MEP EDC kit Packard MCV111B1304 See EE Group
MEC EDC, MS,standard MCV114A1402 MCV114B1302
MEE EDC, Packard, standard MCV114A1404 MCV114B1304
MEG EDC, MS, annular MCV114C1402 MCV114D1302
MEH EDC, Packard, annular MCV114C1404 MCV114D1304

MHA HDC , 1-11 bar MCV112A1302 See HK Group

MHB HDC, 1-6.7 bar MCV112A1301 See HM Group
MHC HDC, 3-11 bar MCV112A1303 See HF Group
MHF HDC, 3-11 bar, standard MCV115A1403 MCV115A1303
MHG HDC, .8-4.6 bar, annular MCV115B1405 MCV115B1305
MHH HDC, 1-11 bar, annular MCV115B1402 MCV115B1302
MHJ HDC, 3-11 bar, annular MCV115B1403 MCV115B1303
MHK HDC, 1-11 bar, standard MCV115A1402 MCV115A1302
MHL HDC, .8-4.6 bar, standard MCV115A1405 MCV115A1305
MHM HDC, 1.1-6.7 bar, standard MCV115A1401 MCV115A1301
MHN HDC, 1.1-6.7 bar, annular MCV115B1401 MCV115B1301

MMA MDC w/o nss 8302MOMA-A 8302MOMA-B

MMB MDC w/ nss 8302MOMB-A 8302MOMB-B

112 520L0895 • Rev AA • June 2007

 Series 90 130 cc Axial Piston Pump
Parts Manual
Service Bulletin: SB-1992-003A

models affected All series 90 94-2xxx, 95-2xxx, 96-2xxx, and 97-2xxx variable pumps

serial numbers Changes will take place at the serial number 92-19-xxxxx for 130 cc pumps

part numbers Refer to text of this bulletin for specific part numbers.
affected Housing: (all frame sizes)Thickness adjacent to the side cover has been increased.
Side Cover: (100 cc & 130cc only) Thickness increased.
End Cap: (all frame sizes) Match housing change; small end cap screws (55 cc-100 cc) will be larger;
the orientation of the charge relief valve on side port end caps has been changed from an
oblique to a vertical orientation.
Controls: (130cc only) Eliminate mounting plate, three-pin link change.
Side Cover: (130cc only) Swashplate hold-down (“T-bar”) mounting will be changed to commonize
the design with the smaller displacement units

Note: Reference PIB-9102 for design changes and outline dimensions.

parts disposition Non-interchangeable

520L0895 • Rev AA • June 2007 113

 Series 90 130 cc Axial Piston Pump
Parts Manual
Service Bulletin: SB-1994-025

products affected Series 90 130 cc variable pumps

subject Charge pump design change

description To improve efficiency and reliability, the number of parts in the charge pump is being
reduced. The charge pump on the 130 cc frame size is changing such that the outer port
plate (H30) is an integral part of the charge pump cover (J15) and the distance plates are
eliminated.

For auxiliary pad options, the new charge pump cover is rotation dependent. The cover
will be marked either left hand (L) or right hand (R). The non-auxiliary pad cover is not
rotation dependent.

The charge pump shaft also changes and must be replaced when using the new
style hardware. The complete charge pump assembly can be interchanged with
corresponding hardware.

However, piece parts are not interchangeable.

Old charge pump design

New charge pump design

L
New charge pump cover
for pumps without auxilary pads L
(same cover for left hand or
right hand rotation)
New charge pump covers for pumps with auxiliary pads.
The new charge pump covers have an "L" or "R" stamped
on them for easy identification

114 520L0895 • Rev AA • June 2007

 Series 90 130 cc Axial Piston Pump
Parts Manual
Service Bulletin: SB-1994-025

models affected All 97-2xxx and 972xxxx variable pumps

serial numbers Change occurred at serial number N-93-34-xxxxx

part numbers
Obsoleted Charge Pump Parts Chg. pump
affected Auxilary Replacement
displace- Rotation
pad Kit
Gear Set Shaft Cover ment
347518 No LH or RH 8510064
714444 303636 347526 20 cc Yes LH 8510065
347526 Yes RH 8510066
347518 No LH or RH 8510067
714451 303636 347526 26 cc Yes LH 8510068
347526 Yes RH 8510069
347518 No LH or RH 8510070
714469 303636 347526 34 cc Yes LH 8510071
347526 Yes RH 8510072

parts disposition Interchangeable - piece parts are not interchangeable

520L0895 • Rev AA • June 2007 115

 Series 90 130 cc Axial Piston Pump
Parts Manual
Service Bulletin: SB-1994-036

products affected Series 90 55 thru 130 cc variable pumps

subject Integral filtration manifold

description As a product improvement, Sauer-Danfoss is changing the integral filter manifold and
bulkhead nut to make it more easily indexed.

The old bulkhead nut may be used with either the old or new filter manifold. The new
bulkhead nut can only be used with the new filter manifold.

The old bulkhead nut will remain available as a service part. The old filter manifold will be
obsoleted and no longer available as a service part.

Old Design

Manifold

Nut

New Design

Manifold

Nut

models affected All series 90 55 thru 130 cc variable pumps with “L”,“M”, or “P” filtration option code

serial numbers Change occurred at serial number 95-18-xxxxx

part numbers Part number Part number

affected Description (prior to 95-18) (95-18 & beyond)
Filter manifold 8800200 8800896
Bulkhead nut 9002863-1600 5000222

parts disposition Interchangeable - new bulkhead nut can only be used with new filter manifold

116 520L0895 • Rev AA • June 2007

 Series 90 130 cc Axial Piston Pump
Parts Manual
Service Bulletin: SB-1995-003

products affected Series 90 variable pumps - all frame sizes

subject Manual displacement control (MDC) with DC electric solenoid override

description In order to accommodate our European customers, the manifold which attaches to the
front of the manual displacement control (MDC) housing is being changed.

The European solenoid valve requires a thicker manifold to provide clearance between
the solenoid and the front of the MDC housing. The revised manifold will protrude
closer to the mounting flange of the pump, reducing dimension “A” shown in the
accompanying drawing by approximately 5 mm [0.2 in]. Please see chart below for
specific clearances.

The thicker manifold requires longer screws and may be used with either the U.S. or
European sourced solenoid.

This change will become effective during March of 1995. The old manifold will be
obsoleted and no longer available as a service part.
Solenoid valve

Manifold
"A"

"X"
Neutral Start
Switch (NSS)
Option

Top view Series 90 Front view

Manual displacement control View in "X" direction
with DC solenoid override

Frame size 42 55 75 100 130

Dimension Current 39.9 55.9 54.1 60.2 74.4
“A” [1.57] [2.20] [2.13] [2.37] [2.93]
mm Future 34.9 50.9 49.1 55.2 69.4
[in] [1.37] [2.0] [1.93] [2.17] [2.73]

models affected All series 90 variable pumps using MDC with DC electric solenoid override.

serial numbers Change will take place in March 1995.

part numbers Description Current part number New part number Quantity
affected Manifold 8800365 505022 1
Screw 9007314-0605 9007314-0606 2

parts disposition Interchangeable (new manifold requires longer screws)

520L0895 • Rev AA • June 2007 117

 Series 90 130 cc Axial Piston Pump
Parts Manual
Service Bulletin: SB-1995-018

products affected Series 90 130 cc variable pumps

subject Filter tube - pressure and remote filtration

description The filtration tube that is used in the manifold for remote or integral pressure filtration
may be too short in length. The filtration tube should be measured for proper length
and replaced if necessary at first repair for units built prior to N-95-41. The correct length
of the integral filtration tube is 143.76 ± .25mm [5.66 ±.01 inches] and 101.09 ± .25mm
[3.98 ± .01 inches] for the remote filtration tube.

The old filtration tubes are obsolete and no longer available as a service part.

Integral Filter Tube

Remote Filter Tube

models affected All series 90 130 cc variable pumps with integral or remote pressure filtration.

serial numbers Change occurred at serial number N-95-41-xxxxx

part numbers Filter option Old part number New part number
affected Remote 355206 8800938
Integral 355214 8800939

parts disposition Interchangeable

118 520L0895 • Rev AA • June 2007

 Series 90 130 cc Axial Piston Pump
Parts Manual
Service Bulletin: SB-1996-004

products affected Series 90 42, 130, 180, and 250cc variable pumps

subject Side cover design change

description As a product improvement, Sauer-Sundstrand is changing the side cover and swashplate
leveler (T-Bar) guide post design.

The new design side cover will have two hardened inserts in the machined slot which
serves as a guide for the swashplate leveler, and modified guide posts. The swashplate
leveler does not change.

Old guide posts will remain available for service requirements of pumps with the old
design side cover.

The old style side cover will be obsoleted and no longer available as a service part. A
service kit has been created for replacing the old design side cover. The kit includes the
new side cover, guide posts and inserts. Piece parts are not interchangeable..

Guide Post
Guide Post

Swashplate Leveler

Inserts

Side Cover

models affected All series 42, 130, 180, and 250cc variable pumps

serial numbers Change occured at serial number N-96-08-xxxxx.

part numbers Old part numbers New part numbers

affected Description Guide post Side cover Insert assy. Guide post Side cover kit
42 cc 344465 751305 506916 506369 506380
130 cc 503205 746107 8300004 506368 506289
180 cc 503205 746404 506914 506368 506290
250 cc 503205 746404 506914 506368 506290

parts disposition Interchangeable - piece parts are not interchangeable

520L0895 • Rev AA • June 2007 119

 Series 90 130 cc Axial Piston Pump
Parts Manual
Service Bulletin: SB-1997-018

products affected Series 90 130 cc variable pumps

subject Swashplate leveler spring and spring seat change

description As a product improvement, Sauer-Danfoss has changed the design of the springs and
spring seats used on the swashplate leveler from two springs to four springs. The older
spring and spring seat are obsolete and no longer available as a service part.

E22
E22 E82
E80
E80

Old Design New Design

Spring New springs

identification Old spring E80 E82
Free length 106.44 mm [4.19 in] 111.4 mm [4.38 in] 95.25 mm [3.75 in]
O.D. 28.5 mm [10122 in] 28.07 mm [1.11 in] 17.02 mm [ .67 in]

models affected All 97-2xxx and 972xxxx variable pumps

serial numbers Change occurred at serial number N-97-08-xxxxx

part numbers Item no. Description Old p/n Qty New p/n Qty
affected E22 Spring seat 367037 2 8300011 2
E82 Spring - - 8300009 2
E80 Spring 503091 2 8300010 2

parts disposition Interchangeable - only if springs and seats are changed together

120 520L0895 • Rev AA • June 2007

 Series 90 130 cc Axial Piston Pump
Parts Manual
Service Bulletin: SB-1999-010

products affected Series 90 130 cc variable pumps

subject Swashplate leveler design change

description Sauer-Danfoss has changed the design of the swashplate leveler used on Series 90
130 cc variable displacement pumps. Previously, the Series 90 130 cc pumps used two
different leveler designs on a production basis. One leveler (730143) was used in pumps
which were not equipped with an integral speed sensor and a second leveler (510780)
was used specifically for pumps equipped with a speed sensor.

The new leveler is designed and manufactured to be compatible for use in both non
speed sensor and speed sensor equipped Series 90 130 cc pumps. This change improves
the initial assembly and servicing of the pumps by increasing the parts commonality.

The new leveler is completely interchangeable with both of the previous levelers. The
previous two levelers have been obsoleted and are no longer available as service parts.

Leveler

models affected All 97-2xxx and 972xxxx variable pumps

serial numbers Change occurred at serial number N-98-40-xxxxx

part numbers Integral speed sensor

affected equipped Previous to N-98-40 Current
Yes 510780 511052
No 730143 511052

parts disposition Interchangeable - piece parts are not interchangeable

520L0895 • Rev AA • June 2007 121

 Series 90 130 cc Axial Piston Pump
Parts Manual
Service Bulletin: SB-1999-041

products affected Series 90 variable pumps

subject Change to side cover insert material

description As a continuous product improvement, Sauer-Danfoss has changed the side cover insert
material to improve wear characteristics. The new material is more wear resistant than
the previous material.

In order to track this change, new part numbers have been created and the old part
numbers will be obsolete.

Side Cover Insert Kit

Side Cover

models affected 93-2xxx, 94-2xxxx, 95-2xxx, 96-2xxxx, 97-2xxx, 98-2xxx, and 99-2xxx

serial numbers Frame size NMS effectivity date Ames effectivity date
42 cc N-99-36-xxxxx N/A
55 cc N-00-18-xxxxx A-00-18-xxxxx
75 cc N-99-26-xxxxx A-00-38-xxxxx
100 cc N-99-31-xxxxx A-00-38-xxxxx
130 cc N-99-33-xxxxx N/A
180 cc N-99-36-xxxxx N/A
250 cc N-99-36-xxxxx N/A

Frame size Old part number New part number

42 cc 506916 513885
part numbers 55 cc 8000406 513886
affected 75 cc 8000562 513888
100 cc 8200321 513889
130 cc 8300004 513890
180 cc 506914 513891
250 cc 506914 513891

parts disposition Interchangeable

122 520L0895 • Rev AA • June 2007

 Series 90 130 cc Axial Piston Pump
Parts Manual
Service Bulletin: SB-1999-065

products affected Series 90 75, 100, 130, 180, and 250cc variable displacement pumps

subject Hydraulic displacement control gasket and swashplate bearing locator pin retention

description The Series 90 75cc, 100cc, 130cc, 180cc, and 250cc variable displacement pumps utilize
a common gasket to seal the joint between the displacement control housing and main
pump housing.

In November 1998, Sauer-Danfoss introduced a new gasket design for Hydraulic

Displacement Controls (HDC - all options), version 2 Electrical Displacement Controls
(EDC2 - options EE and EN), and two amp current control (options PA and PB) equipped
pumps (see SB-1998-038). The purpose of this gasket is primarily to seal the joint and
aid in the retention of the bearing cage locator pin in the main pump housing. Sauer-
Danfoss has identified that the new gasket may not adequately aid in the retention of
this pin in 75cc pump sizes due to casting and machining tolerances. Installations which
are particularly sensitive to pin retention include those oriented with the control on
the side or on the bottom when the pump is installed. In these types of installations, it
is possible for the pin to come out of its position in the pump housing. This will result in
a loss of alignment between the swashplate and swashplate bearing assembly and the
potential for erratic pump control and/or system performance.

To address this situation, Sauer-Danfoss has introduced a design modification to the

control gasket. The modification will insure that the cage locator pin is retained in 75cc
pumps in all circumstances, while still maintaining the desired gasket clamp load to
avoid leaks.

The new gasket is completely interchangeable with the previous gasket. Sauer-Danfoss
recommends that the previous control gasket be replaced immediately on 75cc pump
assemblies, with controls noted above, in which the control is on the side or on the
bottom of the pump. The pump serial numbers involved are A-98-41-xxxxx through A-
99-49-xxxxx. It is not required to replace the gasket in pumps with the control in the up
position, until the initial servicing of the pump assembly.

The 100cc, 130cc, 180cc, and 250cc pumps are not dependent upon the gasket
to maintain retention of the bearing cage locator pin and are not affected by the
information above.

The new gasket has replaced the previous gasket in all new pump assemblies with
Hydraulic Displacement Control (HDC), version 2 Electrical Displacement Control (EDC2
- EE and EN), and two amp current (PA and PB) controls. The new gasket has also been
placed in all appropriate control kits and overhaul seal kits. Page 3 of this bulletin will
assist you in identifying the new gasket from the previous gasket.

models affected 95-2xxx, 952xxxx, 96-2xxx, 962xxxx, 97-2xxx, 972xxxx, 98-2xxx, 982xxxx, 99-2xxx, and
992xxxx variable displacement pumps equipped with hydraulic displacement controls
and specific option electronic displacement control. (EE, EN, PA, PB)

serial numbers Sauer-Danfoss Ames 75cc pump production: A-99-50-xxxxx.

Sauer-Danfoss Ames 100cc pump production: A-00-25-xxxxx.
Sauer-Danfoss Neumunster production: N-00-01-xxxxx.

520L0895 • Rev AA • June 2007 123

 Series 90 130 cc Axial Piston Pump
Parts Manual
Service Bulletin: SB-1999-065A

part numbers Previous gasket New gasket

affected 511608 8801241

parts disposition Interchangeable

Control Gasket

Cage locator pin

Retains Cage Locator Pin

New Gasket:

Previous Gasket:

124 520L0895 • Rev AA • June 2007

 Series 90 130 cc Axial Piston Pump
Parts Manual
Service Bulletin: SB-2000-022

products affected Series 90 75, 100, and 130 cc variable displacement pumps

subject Displacement limiter screw and servo piston change

description Sauer-Danfoss has identified a product issue affecting a limited number of Series 90
100cc variable displacement pumps built at the Ames, Iowa, USA facility in the time
frame of June 2000 through August 2000 (serial date range A-00-23-xxxxx up to and
including A-00-34-xxxxx). This same issue also affects a limited number of Series 90 75cc,
100cc, and 130cc variable displacement pumps built at the Neumunster, Germany facility
in the time frame of June 2000 through September 2000 (serial date range N-00-23-
xxxxx up to and including A-00-39-xxxxx).

These pumps, equipped with displacement limiters, may have a servo piston with large
center drills. These large center drills may allow the displacement limiter screw to thread
into the servo piston while turning the screw in against the servo piston while adjusting
the pump’s displacement. If this occurs, the pump will be mechanically held in stroke by
the displacement limiter screw. This situation can only happen during adjustment; it will
not occur during normal operation.

Sauer-Danfoss has introduced a change to the servo piston and the displacement limiter
screw to prevent the reoccurrence of this issue. We have made a change to the servo
piston to limit the size of the center drill. We have also changed the design of the service
displacment limiter screw from a “flat” point to a “dog nose” point. When servicing a
pump that meets the above criteria, you must verify that the displacment limiter screw of
the new “dog nose” version. If it is not, you must replace the displacement limiter screw
with the new version. If the pump is not inside the date code ranges and displacements
mentioned, you do not need to verify the version of the displacement limiter screws.

To assist in tracking this change, we have issued new part numbers for the servo pistons
and displacement limiter screws. Even though this issue did not affect the 42cc or 55cc
pumps, the service displacement limiter screw part number will change also to keep one
common service part. We do this as the same displacement limiter screw is used on 42cc,
55cc, 75cc, and 100cc pumps.

Old New
"Flat Point" "Dog Nose"
Displacement Limiter Screw Displacement Limiter Screw

520L0895 • Rev AA • June 2007 125

 Series 90 130 cc Axial Piston Pump
Parts Manual
Service Bulletin: SB-2000-022

models affected All 95-2xxx, 952xxxx, 96-2xxx, 962xxxx, 97-2xxx, and 972xxxx variable displacement
pumps. with 1, 2, 4, or P displacement limitation option.

serial numbers Sauer-Danfoss Ames 100cc production with serial number A-00-23-xxxxx up to and
including A-00-34-xxxxx.

Sauer-Danfoss Neumunster, Germany production with serial number N-00-23-xxxxx up

to and including A-00-39-xxxxx.

part numbers Frame size Old servo piston New servo piston Old screw New screw
affected 42 & 55cc N/A N/A 9007712-0814 516677
75 cc 509282 516683 9007712-0814 516677
100 cc 509284 516684 9007712-0814 516677
130 cc 510496 516685 572180 516678

parts disposition Interchangeable

126 520L0895 • Rev AA • June 2007

 Series 90 130 cc Axial Piston Pump
Parts Manual
Service Bulletin: SB-2002-014

products affected Series 90 42, 130, 180, and 250cc variable pumps

subject Side cover screw change

description Sauer-Danfoss has changed the locking compond used on the side cover screws. We
have assigned new part numbers to track this change. The old screw part numbers are
obsolete. They are no longer available for service.

Side cover screw

models affected All 42, 130, 180, and 250 cc variable pumps

serial numbers N/A

part numbers Description Previous part number New part number

affected Screw-hex flange, M6 x 16 508437 517229
Screw-hex flange, M10 x 20 508439 517230
Screw-hex flange, M10 x 25 508441 517231

parts disposition Interchangeable

520L0895 • Rev AA • June 2007 127

 Series 90 130 cc Axial Piston Pump
Parts Manual
Service Bulletin: SB-2003-002

products affected Series 90 130, 180 and 250 cc variable pumps and motors

subject Redesign of cylinder block running face

description As a product improvement, Sauer-Danfoss is changing the outer foot of the running face
on cylinder blocks used in all Series 90 variable pumps, fixed motors, and variable motors.
The outer foot is now lower by .0008 to .0039in. [.02 to .1mm] than the running surface
around the kidneys. The increased clearance between the outer foot and the valve plate
helps optimize the unit’s performance. This change will improve the torque efficiency
and volumetric efficiency of the product.

A part number change tracks this change. We will replace the part numbers on previous
blocks and block kits with new part numbers. The old part numbers are obsolete. They
are no longer available for service parts.

This Service Bulletin revision is adding information regarding 180 and 250 cc units.

Outer foot

models affected Series 90 130, 180 and 250 cc variable pumps and motors

serial numbers Change occurred at serial number: N-03-19-xxxxx for 130 cc

N-03-41-xxxxx for 180 cc
N-03-25-xxxxx for 250 cc

part numbers 130 cc 180 cc

affected Old part number New part number Old part number New part number
510330 519258 518355 519278
518056 519275 8510160 519278
518056 519274 518354 519261
518405 519277 510694 519261
518317 519276
519054 519259 250 cc
515351 519259 Old part number New part number
8510087 519275 518359 519279
510307 519274 8510148 519279
503753 519259 518356 519265
302851 519258 513474 519265

parts disposition Interchangeable

128 520L0895 • Rev AA • June 2007

 Series 90 130 cc Axial Piston Pump
Parts Manual
Service Bulletin: SB-2007-008

products affected Series 90 130 cc variable pumps

subject Redesign block point change

description As a global improvement, the series 90 130cc pump has the following redesigned
components: servo arm, swashplate guide, pump housing, shaft seal assembly, cradle
bearing, swashplate locator link pin, servo arm screw, and leveler.

All parts are non-interchangeable with the exception of the locator link pin and shaft
seal assembly. Model numbers and order codes will not be changed.

Servo arm: A “one piece” servo arm is introduced. The pin that engages the servo piston
is now machined as part of the servo arm instead of pressed in. The old servo arm will
remain available as a service part for a period of time.

Swashplate Guide: The swashplate position is now guided by the fit between the servo
arm and the pump housing . A “shelf” on the servo arm fits under a boss in the housing
to provide a fixed clearance swashplate hold-down. The swashplate was previously held
down with a spring and bracket, which was riveted to the servo arm. The servo arm
to housing clearance now limits lateral movement of the swashplate. The swashplate
guide that was bolted to the bottom of the swashplate has been removed. The separate
swashplate guide will remain available as a service part for a period of time.

Housing: The housing is modified internally to provide the servo arm pivot. Also, the
cradle and side cover radii are reduced. Some customers may notice cosmetic external
changes. The old housing will be obsoleted and no longer available as a service part.

Shaft seal assembly: The shaft seal assembly is interchangeable, but the piece parts are
not.The new lip seal has a smaller O.D. and the I.D. of the seal carrier changed accordingly.
The old shaft lip seal will remain available as a service part.

Cradle bearing: The new design is cold formed with the positioning pin now integral with
the bearing. The old cradle bearing will remain available as a service part for a period of
time.

Locator link pin: The new locator link pin has a rubber gripping element added to help
hold it in position during assembly. The new locator link pin is interchangeable with the
old locator link pin.The old locator link pin is obsolete and no longer available for service.

Screw: One of the two screws that hold the servo arm to the swashplate has changed
from a M10 to a M8 screw. See drawing for details.

Leveler: All 130cc pumps now use a leveler and two spring seats. The new leveler plus
spring seats are interchangeable with the old leveler. The old leveler is obsolete and no
longer available for service.

520L0895 • Rev AA • June 2007 129

 Series 90 130 cc Axial Piston Pump
Parts Manual
Service Bulletin: SB-2007-008

models affected All series 90 130 cc variable pumps

serial numbers Change occurred at serial number N-07-10-xxxxx

part numbers Description Old part number New part number

affected Servo arm 303214 11000397
Servo arm screw 536649 519150
Swashplate 516204 11001678
Pin 754606 11003805
Cradle bearing 324657 11000866
Swashplate guide 766022 Not Used
Spring 303420 Not Used
Seal carrier assembly 510018 519732
Shaft lip seal 90080000-0114 519021
Housing 503426 11000395
Housing PPU special 515350 1006984
Housing PPU 729855 110006670
Side cover 501576 11001326
Leveler 508311 511052
Spring seats None 8300011

Servo arm screw Servo arm screw

M10 M8
Servo arm Servo arm
Swashplate guide
Spring
Locator link pin Locator link pin

Swashplate Swashplate

Old Design New Design

parts disposition Interchangeable - piece parts are not interchangeable

130 520L0895 • Rev AA • June 2007

Series 90 130 cc Axial Piston Pump
Parts Manual
Notes

520L0895 • Rev AA • June 2007 131

OUR PRODUCTS Sauer-Danfoss Mobile Power and Control Systems
– Market Leaders Worldwide
Hydrostatic transmissions
Sauer-Danfoss is a comprehensive supplier providing complete
Hydraulic power steering
­systems to the global mobile market.
Electric power steering
Sauer-Danfoss serves markets such as agriculture, construction, road
Electrohydraulic power steering
building, material handling, municipal, forestry, turf care, and many
Closed and open circuit axial piston others.
pumps and motors
Gear pumps and motors We offer our customers optimum solutions for their needs and
develop new products and systems in close cooperation and
Bent axis motors partner­ship with them.
Orbital motors
Sauer-Danfoss specializes in integrating a full range of system
Transit mixer drives ­components to provide vehicle designers with the most advanced
Planetary compact gears total system design.

Proportional valves Sauer-Danfoss provides comprehensive worldwide service for its

Directional spool valves products through an extensive network of Authorized Service
­Centers strategically located in all parts of the world.
Cartridge valves
Hydraulic integrated circuits
Hydrostatic transaxles
Integrated systems
Fan drive systems
Electrohydraulics
Microcontrollers and software
Sauer-Danfoss (US) Company
Electric motors and inverters
2800 East 13th Street
Joysticks and control handles Ames, IA 50010, USA
Phone: +1 515 239-6000, Fax: +1 515 239 6618
Displays
Sensors Sauer-Danfoss (Neumünster) GmbH & Co. OHG
Postfach 2460, D-24531 Neumünster
Krokamp 35, D-24539 Neumünster, Germany
Phone: +49 4321 871-0, Fax: +49 4321 871 122

Sauer-Danfoss ApS
DK-6430 Nordborg, Denmark
Phone: +45 7488 4444, Fax: +45 7488 4400

520L0895 • Rev AA • June 2007 www.sauer-danfoss.com