Anwarul Uloom College (Autonomous)

New Mallepally, Hyderabad

Criterion - II

Program outcomes, program specific outcomes and course outcomes)

Department Name:-COMPUTER SCIENCE AND ENGINEERNIG

Program Objective: B.Sc. (CSE)

 To develop competencies and skills needed for becoming an effective Computer

Programmer.

 To familiarize the students with various approaches, methods and techniques of

Information Technology.

 Exploring different approaches in computer programming and problem solving

skills.

 To enable students to manage Software Projects from its Conceptual Stage to the
final product creation.
 To train students in logical thinking and problem solving skills so as to solve real
world problems.

SEMESTER : FIRST SUBJECT : Electrical Circuits and Machines (ECM)

Paper Code : 7142

Course Objective: -
 This course introduces the basic concepts of network and circuit analysis which is the
foundation of the Electrical Engineering discipline.
 The emphasis of this course if laid on the basic analysis of circuits which includes network
analysis, 1-phase ac circuits, magnetic circuits. .
 Apply knowledge of mathematics, science, and engineering to the analysis and design of
electrical circuits.
 Apply circuit theorems to simplify and solve complex DC and AC electric networks.

Unit Unit – Objective Learning Outcomes

Introduction to Electrical Circuits and

Machines
I
Students will try to learn: Students will be able

1. An ability to apply knowledge of 1. Realize the working principles

mathematics, science, and engineering of electrical circuits and measuring
 to the analysis and design of electric instruments.
circuits
2. To study the working principle of
2. To introduce the concepts of electrical Electrical Machines
circuits and its components.

DC Circuits

II Students will try to learn: Students will be able

1. Demonstrate the concepts of ohm’s 1. Analyze linear electric circuits to

law, Kirchhoff's laws, determine DC response.
mesh analysis and nodal analysis. 2. Analyze networks using mesh and
2. To analyze and solve electrical nodal analysis
circuits using network laws and 3. Network Theorems: Thevenin’s,
theorems. Norton’s circuit diagrams.

AC Circuits

III Students will try to learn: Students will be able

1. Concept of series and parallel RLC 1. Analyze linear electric circuits to

circuits. determine AC response.
2. Identify the transient response for RL
and RC circuits.
3. Illustrate the concepts of three phase
AC circuits.

Transformers

IV Students will try to learn: Students will be able

1. Infer the working principle of 1. To identify the type of electrical

transformer under various machine used for that particular
operating conditions. application.
2. Analyze the transformer, dc 2. To understand magnetic circuits, DC
machines and ac machines with circuits and AC single phase & three
respect to their efficiency, phase circuits.
equivalent circuits and losses. 3. To study and understand the different
3. Ability to represent single-phase types of DC/AC machines and
and three-phase transformers in Transformers
electrical circuits. 4. Demonstrate basic knowledge of
4. Analyze the parameters and electronic instrumentation.
performance of dc generators and
motors.
SEMESTER : SECOND SUBJECT : ELECTRONIC DEVICES
Paper : II

Course Objective: -

 The broad education necessary to solid state electronics.

 Outline the operation of PN junction diode and its characteristics.
 Illustrate the operation of Bipolar Junction Transistor and its characteristics.
 Demonstrate the operation of JFET and MOSFET and their characteristics.
 Extend the operation of semiconductor devices.
 Summarize the operation and characteristics of various power devices and display devices.

Unit Unit – Objective Learning Outcomes

PN Junction

I Students will try to learn: Students will be able

1. To give knowledge of some basic 1. Explain the V-I characteristics of

electronic components and circuits. forward and reverse biased PN
2. Ability to analyze PN junctions in junction diode.
semiconductor devices under various 2. Explain the effect of temperature on
conditions. V-I characteristics of PN junciton
3. Ability to design and analyze simple diode.
rectifiers and voltage regulators using 3. Describe the behavior of special
diodes. purpose diodes.

Bipolar Junction Transistor (BJT)

II Students will try to learn: Students will be able

1. Ability to recognize the basic 1. Discussions of the bipolar junction
operation of electronic devices such transistors ( BJT), construction,
as diodes, BJT. circuits, models and amplifiers.
2. Applications of BJT. 2. Understand and analyze bipolar
junction transistor (BJT).
 Field Effect Transistor (FET)
III Uni Junction Transistor (UJT)

Students will try to learn: Students will be able

1. Analyze small signal model of FET 1. Discussions of the metal oxide field
and MOSFET. effect transistor (MOSFET),
2. Explain behavior of FET at low construction, circuits, models and
frequency. amplifiers
Understand and analyze the 2. Demonstrate the switching and
metal-oxide-semiconductor (MOS) amplification Application of the
device. semiconductor devices (FET)
3. Understand and analyze MOS field-
Understand and analyze MOS
effect transistor (MOSFET).
field-effect transistor (MOSFET).

Silicon Controlled Rectifier (SCR)

IV Photo Electronic Devices

Students will try to learn: Students will be able

1. Construction and working of 1. To understand solar harvesting of

silicon controlled rectifier. energy through photovoltaic .
2. An ability to understand a energy 2. Classify and describe the
requirements and photovoltaic. semiconductor devices for special
An understanding of concepts of Applications
solar photovoltaic
SEMESTER : SECOND SUBJECT : PHYSICS
Paper Code : 7147

Course Objective: -

 Students will demonstrate skills in scientific inquiry, problem solving and laboratory
techniques.
 Students will be able to demonstrate competency and understanding of the concepts found
in Quantum Mechanics, Fiber optics and lasers, Crystal Structures, Semiconductor physics
and a broad base of knowledge in physics.
 An ability to understand the framework of quantum mechanics.
 An understanding of the methods used to solve physics problems using quantum
mechanics.
 The broad education necessary to understand microscopic systems.
 The graduates will be able to solve non-traditional problems that potentially draw on
knowledge in multiple areas of physics.

Unit Unit – Objective Learning Outcomes

Bonding in Solids
Crystal Structure
I
Students will try to learn: Students will be able

1. Analyze different types of matter 1. An ability to understand the basic

depending on nature chemical bonds framework of solid state physics
and their properties. 2. An understanding of concepts
2. Analyze the crystal structures by bonding, crystal structure, crystal lattice.
applying crystallographic parameters. 3.The broad education necessary to
understand material science.
 Principles of Qauntum Mechanics
Electron Theory of Metals
II
Students will try to learn: Students will be able
1. Concept of wave function, physical 1. Describe the quantum mechanical
significance and its applications to systems.
quantum mechanical problems. 2. Identify the applications of quantum
2. Write down the concepts elated to the mechanics.
framework of quantum mechanics.
3. Learn and to apply concepts learnt in
Quantum mechanics to one
dimensional problems

Semi-Conductors
Super Conductivity
III
Students will try to learn: Students will be able
1. An ability to understand concepts of 1. Describe the semiconductor devices
semiconductor physics and their applications.
2. The Hall effect in semiconductors and 2. Write down the concepts related to
to determine the carrier solid state physics and material
concentration. science.
3. : Write down the concepts related to 3. Learn and to apply concepts learnt in
different properties of the materials. solid sate physics to the problems like
4. Learn the idea of superconductivity electrical conductivity
and importance in advancement of
technologies.

Laser
Fiber Optics
IV
Students will try to learn: Students will be able
1. Principle, properties and 1. To identify the applications of Laser -
applications of Lasers and optical Industry, scientific and Medical fields.
fibers 2. To identify the applications of optical
2. Understand principles of the fiber communication.
optical devices and their 3. Applications of optical fibers in
applications. Medicine and Sensors.
3. Write down the concepts related
to optical communication.
4. Learn to use optical
communication techniques and
idea of optical fiber
communication.