Scribd
Upload
93 views

The GY-HC500/550/900 IFB and Return Video Over The Internet

The GY-HC500/550/900 camcorders can receive video and audio streams over the internet for return video and intercom functions. Up to 10 cameras can pull H.264 video and audio streams from a single encoder. Return video is displayed on the LCD/EVF and via SDI when a button is pressed, while HDMI only outputs live video. The Kiloview E1 encoder is recommended for return video and the DEVA DB91-TX for intercom. Cameras can store up to 4 source addresses and switch between them via the menu.

Uploaded by

Jason Feirstine
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
93 views

The GY-HC500/550/900 IFB and Return Video Over The Internet

The GY-HC500/550/900 camcorders can receive video and audio streams over the internet for return video and intercom functions. Up to 10 cameras can pull H.264 video and audio streams from a single encoder. Return video is displayed on the LCD/EVF and via SDI when a button is pressed, while HDMI only outputs live video. The Kiloview E1 encoder is recommended for return video and the DEVA DB91-TX for intercom. Cameras can store up to 4 source addresses and switch between them via the menu.

Uploaded by

Jason Feirstine
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

The

GY-HC500/550/900 IFB and Return Video over the Internet


The Connected CAM series camcorders feature built-in IFB and Return Video decoders capable of
receiving the H.264 stream over the Internet via RTSP “Pull” protocol (Return Video) and
Icecast/Shoutcast streams for the IFB. Multiple cameras (up to 10) can "pull" the RTSP/Icecast
streams from a single Return Video/IFB encoder. The camera can receive either IFB or Return
Video, not both simultaneously. Return Video channel also includes two channels of audio
(stereo), and Return Video audio channel(s) can be used for the IFB as well.

Return
RTSP “Pull”

STUDIO

Encoder

SDI Fixed “public” IP

On location

R IFB Encoder
Audio Decoder DEVA DB91-TX
L
Headphones out
Internet
Return Video
Video Decoder Encoder
EVF, LCD, SDI
Kiloview E1

Return Video is displayed in the EVF/LCD and output via SDI when the pre-assigned button
"Return Video” is pressed once. The second press would return the LCD/EVF/SDI to the live video
output. The HDMI output does not switch to Return Video and outputs live video all the time.
This allows using two monitors for simultaneous live and return video display.

Live
Headphones
Return

HDMI
GY-HC500 SDI (Live Audio only)

For Return Video we recommend the Kiloview E1 H.264 encoder and for the IFB - DEVA DB91-TX
IP audio encoder. The camera can memorize up to 4 Return/IFB servers to allow quick switching
between sources in the field via the camera menu.
DEVA DB91-TX IFB encoder Kiloview E1 Return Video encoder

LAN L R R L SDI LAN 1


It is recommended to assign any two User Buttons for Return Video or IFB operation.
User 1 – to start/stop Return Video/IFB stream over the Internet. User 1
User 2 – to view Return Video in the EVF, LCD, and the SDI output. User 2 (Not needed for IFB)

Menu → Camera Function → USER Switch Set →


Pressing User 1 starts the Return/IFB stream.
Symbol “RET” or “IFB” indicates that Return/IFB is available.

The headphones output can be set separately for L/R channels to play the mix of live audio
and return (Auto), Return only, or no audio for return (Off).
Menu → A/V Set → Audio Set → IFB/RET Monitor →
The GY-HC900 supports continuous (non switched)
return video output via SDI-2 connector.

SDI-2

Camera setup:
Return Video IFB

The Source Address is the "public" IP


address of the encoder. The encoder
installed at the studio must have fixed IP
for cameras to "pull" the stream from.
(Ports forwarding may be needed as well)

2
The Kiloview E1 encoder setup:
The GY-HC500/550/900 cameras return video decoder supports 1280x720 30/60p H.264 stream
up to 3 Mbps with AAC audio over RTSP protocol.

The Return Video latency is ~ 1 sec.

3
The DEVA DB91-TX IP audio encoder setup:

The IFB latency is ~ 0.7 sec


4

You might also like