Scribd
Upload
3K views

Test Pack Format: Contents of Hydrostatic Test Packages

The document outlines the contents that should be included in test pack formats. Test packs will include the latest revision of piping and instrumentation diagrams covering the scope of the test. They will also include details such as test limits, blind locations, fill/drain points, vent/drain locations, and pressure gauge locations. The test packs ensure all necessary documentation such as test reports, checklists, welding records, inspection reports, and punch lists are provided.

Uploaded by

mitesh
Copyright
© © All Rights Reserved
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
3K views

Test Pack Format: Contents of Hydrostatic Test Packages

The document outlines the contents that should be included in test pack formats. Test packs will include the latest revision of piping and instrumentation diagrams covering the scope of the test. They will also include details such as test limits, blind locations, fill/drain points, vent/drain locations, and pressure gauge locations. The test packs ensure all necessary documentation such as test reports, checklists, welding records, inspection reports, and punch lists are provided.

Uploaded by

mitesh
Copyright
© © All Rights Reserved
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 2

Test Pack Format

- Pressure test report for Piping


- Marked-up PID
- Blind check list
- Welding History Report and Welding Joint Marked ISO Drawing
- NDE Report
- PWHT and Hardness test Report
- Post – Test Punch List (contractor + Client)
- Copies of reinforcing pad pressure test certificates (If necessary).

Test packs will include the latest available revision of each isometric covering the
scope of the test.
a. Test limits, and highlight line to be tested.
b. Size (thickness') and location of all test blinds and including those required at
instrument connections e.g. orifice flanges.
c. Identify location for the connection of the fill and drainage points for the
system.
d. Vent points
e. Drain points
f. Location and range of pressure gauges to be used. Minimum (2) Calibrate
gauges enquired, one located at an accessible low point of the test and one
gauge located at the highest points on the test manifold.
g. Any other special requirements such as chloride content if applicable

CONTENTS OF HYDROSTATIC
 
TEST PACKAGES

Cover sheet Pressurize As- Built File


Description of Line Test

Safety Check Sheet

Pipe Work Pre test
Check list

Hydrostatic Test Report

Monitoring During Testing


Data Sheet
Turn over Dossier
Welding Travel
Check Sheet

Heat Treatment
Check Sheet

Hardness Testing Report


Blow, Flush & Chemical
Cleaning Check List

Flushing & Cleaning


Check List

Punch List Check Sheet


NDT Reports

You might also like