Scribd
Upload
366 views1 page

Pile Cap Design 3 Piles

This document outlines the design of a pile foundation, including dimensions of the pile cap, columns, piles, and spacings. It provides unit weights for soil and concrete. It calculates the total foundation weight and buoyant force. It then lists the allowable compression, lateral, and displacement values for the piles. Finally, it provides formulas to check the maximum and minimum pile reactions, actual lateral pile reaction, and moments due to pile eccentricity.

Uploaded by

dantevarias
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
366 views1 page

Pile Cap Design 3 Piles

This document outlines the design of a pile foundation, including dimensions of the pile cap, columns, piles, and spacings. It provides unit weights for soil and concrete. It calculates the total foundation weight and buoyant force. It then lists the allowable compression, lateral, and displacement values for the piles. Finally, it provides formulas to check the maximum and minimum pile reactions, actual lateral pile reaction, and moments due to pile eccentricity.

Uploaded by

dantevarias
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

DESIGN 

OF PILE FOUNDATION
A. Outline of Footing
Soil Depth (Sd)  = 700 mm
Pile Cap Thickness (H)  = 900 mm
Pile Cap Length (L)  = 2700 mm
Pile Cap Width (B)  = 2500 mm
Column Width (b)  = 500 mm
Column Length (l)  = 500 mm
Pile Length (Lpile)  = 20 m
Pile Spacing (Sx)  = 1700 mm
Pile Spacing (Sz)  = 1500 mm
Edge Spacing  = 500 mm
Number of Piles(Np)  = 3 pcs
Section Modulus about X (Spx)  = 1.5 m
Section Modulus about Z (Spz)  = 1.7 m

Unit Weights:
γsoil = 18 kN/m
3

γconc = 25 kN/m
3

Foundation Weights:
Pile Cap Wt.  = 126.5625 kN
Soil Wt.  = 67.725 kN
Total Foundation Wt. (Wfdn)  = 194.2875 kN
Buoyant force (Bf)  = 0 kN

B. Allowable Values
Pile Allowable Compression Forces ‐ Permanent (Nallp) = 695 kN
Pile Allowable Compression Forces ‐Temporary (Nallt) = 695 kN
Pile Allowable Lateral Force ‐ Permanent (Hallp) = 67.5 kN
Pile Allowable Lateral Force ‐ Temporary(Hallt) = 67.5 kN
Pile bearing check ratio (vertical) = 0.75
Pile lateral check ratio = 0.7
Pile displacement check ratio = 0.7

C. Pile Check Formula
where:
Fy Wfdn Mx Mz Nmax : Maximum Pile Reaction
Nmax
NP Spx Spz Nmin : Minimum Pile Reaction
Hact : Actual Lateral Pile Reaction
Fy Wfdn Bf Mx Mz Np : Number of Piles
Nmin
NP Spx Spz Fy : Column Vertical Reaction
Mx = (Fy + Wfdn) x ep : Moment Due to Pile Eccentricity about X
𝐹 𝐹 Mz = (Fy + Wfdn) x ep : Moment Due to Pile Eccentricity about Z
Hact
𝑁 Spx : Section Modulus about X‐axis
Spz : Section Modulus about Z‐axis

You might also like