Scribd
Upload
362 views

Solar Mounting Structure: Structural Design Concept Report 09/03/2564

The document provides design criteria and load calculations for a steel structure solar mounting system. It specifies standards that will be followed (AISC 360-10), materials that will be used (A572 Grade Gr.50 steel, ISO grade 8.8 bolts and nuts), and load cases to consider including dead load of panels/frames, live load of 30kg/m2, and wind loads calculated according to DPT 1311-50 standard with a basic wind speed of 25m/s. Load calculations are summarized including material properties, dead loads, imposed live load, and wind loads in the x, y, and z directions according to various standards. Results of the structural analysis like deformation, axial/shear/

Uploaded by

Surat Warit
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
362 views

Solar Mounting Structure: Structural Design Concept Report 09/03/2564

The document provides design criteria and load calculations for a steel structure solar mounting system. It specifies standards that will be followed (AISC 360-10), materials that will be used (A572 Grade Gr.50 steel, ISO grade 8.8 bolts and nuts), and load cases to consider including dead load of panels/frames, live load of 30kg/m2, and wind loads calculated according to DPT 1311-50 standard with a basic wind speed of 25m/s. Load calculations are summarized including material properties, dead loads, imposed live load, and wind loads in the x, y, and z directions according to various standards. Results of the structural analysis like deformation, axial/shear/

Uploaded by

Surat Warit
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 13

Solar Mounting Structure

Structural Design Concept Report

09/03/2564
Standard and criteria for analysis structure load

CODE OF PRACTICES
- Ministerial Regulation No. 6, Building Control Act, B.E. 2522
- DPT Standard “Wind Loading Calculation and Response of Building”, DPT 1311-50
- An American National Standard ‘’Specification for Structure Steel Building’’, AISC 360-10

GENERAL CRITERIA FOR DESIGN STEEL STRUCTURE

i. DESIGN CRITERIA
The proposed standard design criteria for steel structure shall conform to the AISC specification for the design.

ii. MATERIAL
The steel material used in the tower and accessories conform to the following.
- Structural Members Square Tube A572 Grade Gr.50 or Equivalent
- Steel plate JIS G 3101 Grade SS400 or Equivalent
- Bolt ISO grade 8.8 or Equivalent
- Nut ISO grade 8.8 or Equivalent
- Plain washer JIS or Equivalent

All structure members’ material shall be hot-rolled steel


Modulus of elasticity Es = 205000 Mpa

Square tube shall conform to A572 Grade Gr.50 or Equivalent


Yield strength Fy = 345 Mpa
Ultimate tensile strength Fu = 450 Mpa
Job Information

Engineer Checked Approved


Name: Surat Warit
Date: 09/03/2564

Project ID
Project Name Solar Car Park

Structure Type Steel

Number of Node 44 Highest Node 44


Number of Frame 55 Highest Frame 55

Number of Basic Load Cases 4


Number of Combination Load Cases 12
SUMMARY CALCULATION OF PV MOUNTING STRUCTURE
Material Property
Steel member grade is Gr.50 Fu = 4500 ksc

Fy = 3450 ksc

Bolt grade is 8.8 Fu = 8000 ksc

Dead Load + Weight of Equipment


Weight of PV Module (DIM: 2279x1134x35mm) = 29 kg

Weight of Steel Frame Support Shall Be Included Automatically by Software

Impose Load
Live load (Roof Structure) = 30 kg/m2

Wind Load to PV Module and Steel Frame Structure (In Accordance with DPT 1311-50 Standard)
Maximum Basic Wind Speed as per DPT 1311-50 Annex A Vs = 25 m/s

Importance Factor Iw = 1

Reference Velocity Pressure q = 0.0637*Vs2 = 39.82 kg/m2

Exposure Factor Ce = 1.22

Gust Effect Factor and Equivalent Static Wind Pressure Cg*Cp = -2 (Annex B)

Equivalent Static Wind Pressure p = Iw*q*Ce*Cg*Cp = 97.16 kg/m2

z= 96.79 kg/m2

x= 8.47 kg/m2

Wind Pressure as per Building Control Act p = 120 kg/m2


Dead Load

Live Load
Wind Load (Building Control Act, B.E. 2522)

Wind Load (DPT Standard)


Deformation

3D Model
Axial Load Diagram

Shear Force Diagram


Bending Moment Diagram

PMM Ratio
Beam SP200x75x2
Beam SP150x65x1.6
Roof Structure with walk way

Deformation
PMM Ratio

You might also like