Scribd
Upload
48 views27 pages

Design Report

The document provides design criteria and load calculations for a structure designed using ETABS, SAFE, and PROKON. It includes design criteria like material strengths, soil bearing capacity, and code used. Load calculations are presented for slabs, beams, and footings. RCC design of slabs, beams, columns, and footings was done using ETABS, SAFE, and PROKON respectively in accordance with ACI 318-11.

Uploaded by

Bwabt sathish
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
48 views27 pages

Design Report

The document provides design criteria and load calculations for a structure designed using ETABS, SAFE, and PROKON. It includes design criteria like material strengths, soil bearing capacity, and code used. Load calculations are presented for slabs, beams, and footings. RCC design of slabs, beams, columns, and footings was done using ETABS, SAFE, and PROKON respectively in accordance with ACI 318-11.

Uploaded by

Bwabt sathish
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 27

DESIGN REPORT

1. DESIGN CRITERIA

• THE STRUCTURE IS ANALYSED AND DESIGNED BY

USING ETABS , SAFE, PROKON.

• CODE BOOK USED FOR :-

a) CONCRETE = ACI 318-11

• CHARACTERISTIC STRENGTH OF CONCRETE


Fcu= 35N/MM²
• CHARACTERISTIC STRENGTH OF STEEL
fy = 460 N/MM² for flexural and
Fy420 for Shear reinforcement.
• SAFE BEARING CAPACTY OF SOIL ARE TAKEN AS PER
THE SOIL REPORT .
2. LOAD BREAK DOWN CALCULATION FOR SLABS

GROUNDFLOOR SLAB:

Floor Finish loads 12cm thk = 2.5 kn/m2


False ceing loads = 0.5 kn/m2

Total load on slab = SDL = 3 kn/m2 ,


Live Load = 3 kn/m2

3. LOADS ON BEAMS

• Wall loads on ground floor slab beams & tie beams as follow:
Density of Hollow blocks = 14 kn/m3
Width of walls = 0.25 m ,
(Maximum height to be taken ) Height of the wall = 3.5 m
Loads from blocks = 12.5 kn/m
Density of plaster = 20 kn/m3
Width of plaster = 2* 0.025 = 0.05m , Height of the wall = 3.5 m
Loads from plaster = 3.5 kn/m

Loads from wall on beams = 16kn/m


• Parapet loads on First floor slab beams as follow:
Density of Concrete = 25 kn/m3
Width of walls = 0.2 m , Height of the wall = 0.5m
Loads from Concrete = 2.5kn/m
Density of plaster = 20 kn/m3
Width of plaster = 2* 0.02 = 0.04m , Height of the wall = 0.5m
Loads from plaster = 0.4 kn/m

Loads from parapet wall = 3 kn/m


4. Programs used for different types of members.

• ETABS
• RCC 3D modal.
• RCC Beams design.
• RCC Column design.
Concrete Frame Design Preferences for ACI 318-11

hem Description

01 MCI 31&11

24

Yes
07
D
2

10
05

12 0.65
13

14
F #mand/mT os)
Explanation of Cobr Coding for Values
15
F #mS# c Blue: 0e We
16
Set No Defauh Values Reset ID Previous Values
Load Combination Name

Combination Tyqe Lir+ear Add

fdodrfy/show Notes

Auto Combination

Scale Factor
1.2

Super dead 1.2


Load Combination Data

General Data
Load Combination Name

Combination Tyqe

Notes

Auto Combination

Define Combination of Load CaseCombo Resuhs

Live 1 Delete
Super dead 1
fdaterial Tyge

Directional Symmetry Tyge

76. 5725 k N/m’


klaterial Tyqe

Directional Symmetry Tyqe

klaterial Display Color

fdodrfy/show Notes

klaterial 'Weight and klass


@ Specriy Weight Densely

Weight per Unit Volume k N/m’

kg/m’

klechanical Property Data

24B70

02

Coefficient of Themal Expansion 00000099

Shear fdoduIus

fdodrfy/show fdatefial Property Design Data


fi Des+pn Ouipui lfieriiJy AI Failures

O °• s• '•c*
• SAFE

• RCC SLAB design


Design Load Combinations Selection

Select Type
Load Combindion Type Saerxjth (L3é«ate)

Select Load Combination

Let d mad Combindions Design Load Combindions


LDNC TERM DEFLE1IDN
SERVICE
ULTIMATE
ULTIMATE 1.*D
Modg/Show Notes

Inilial Candaions

Loads Aoplied

Super dead
@ Load CaseData - Nonlinear Stati c

MadCaze Name Load Case Dda Nder Load Case Tyge


Modi-y/Show Notes.

Initial Condtions /\naIysis Tyge


Ifl1I CVdW d - Sd4 Ufl dd SMV O Uear
CoCnue!mmS+dedVddNonneaCase Nonnea+Stow U§€)

NoJnea%ongTexCracked

Loads @plied Uplfi Solution Contol


Force Convergence Tolerance iReIative)
Load Name Scale Factor
] ppQg

0 C M D FL 0

i Combination Tyge 1ea‹ Add

Ndes

Co Dd‹neCombndiondLoadCase/Combo Result ’ ’

r IMMEDIATE ALL LOADS 1.DDDD’***’ ’


IMMEDIATE SUSTAINED -1.0000
LONG TERM SUSTAINEO 1.DDDD

i Design Selection
@ Strength lUkicde)

@ Service - Initial @ Service - Long Tern


3. PROKON :

• FOOTINGS
LOADS FROM TIE BEAM , BLOCK WORKS AND STEEL ROOF LOADS.
STEEL ROOF LOADS TAKEN FROM THE STEEL SHOP DRAWINGS
ACI 318 - 2011
ACI 318 - 2011
ALL RCC MEMBERS CALCULATION FILES ATTACHED

You might also like