Scribd
Upload
204 views

Tooling Chart: LCSF Low Clearance Split Frame

The document provides a chart of tooling options for a low clearance split frame, including beveling, parting, and single point tools. It lists various tool part numbers, sizes, materials supported, and maximum wall thicknesses handled.

Uploaded by

Andres Navarro
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
204 views

Tooling Chart: LCSF Low Clearance Split Frame

The document provides a chart of tooling options for a low clearance split frame, including beveling, parting, and single point tools. It lists various tool part numbers, sizes, materials supported, and maximum wall thicknesses handled.

Uploaded by

Andres Navarro
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

TOOLING CHART

LCSF LOW CLEARANCE SPLIT FRAME

Genuine Wachs Tooling for the LCSF Low Clearance Split Frame is compatible with all models
from 6” through 48” (DN 150-1200). Genuine Wachs cut and bevel form tools can machine all
common pipe materials and most pipe schedules. Refer to tooling sheet for specific range.
Single point tooling is used on heavy wall pipe and covers most pipe material and all pipe
schedules. Premium Wachs Tooling for high alloy materials is available on select part
numbers (denoted by a “P” suffix), with additional numbers available by special order.
Genuine Wachs Tooling is manufactured from premium tool steels utilizing exclusive designs to
Engineered for give you consistent quality cutting. Our OEM tooling is manufactured and tested to the highest
Enhanced Cutting standards in the industry. The numbers shown are commonly used tooling for most applications. If
of High Alloy you have an application for tooling not listed, please contact the factory to speak with a technical
Materials sales representative.

BEVELING AND COUNTERBORE TOOLS


Description Part Number Application Image
HSS Inside Bevel Tool Short bevel tool for most
30º x 3 1/8” (79mm) 43-702-05 materials. 30º - 1” (25mm)
and 37.5º - 3/4” (19mm)
37.5º x 3 1/8” (79mm) 43-703-05 maximum wall
HSS Inside Bevel Tool
Long bevel tool for most
53-703-01
30º x 5” (127mm) materials. 30º - 1” (25mm)
53-703-01P
and 37.5º - 3/4” (19mm)
53-703-00 maximum wall
37.5º x 5” (127mm)
53-703-00P
HSS Outside Bevel Tool
30º x 3 1/8” (79mm) 43-707-05 Outside bevel tool for most
materials. 30º - 1” (25mm)
30º x 5” (127mm) 43-707-06
and 37.5º - 3/4” (19mm)
37.5º x 3 1/8” (79mm) 43-708-05 maximum wall
37.5º x 5” (127mm) 43-708-06
HSS Double Bevel Tool
30º x 3 1/8” (79mm) 43-709-05 Double bevel tool for most
30º x 5” (127mm) 43-709-06 materials. 3/4” (19mm)
37.5º x 3 1/8” (79mm) 43-710-05 maximum wall

37.5º x 5” (127mm) 43-710-06


HSS Compound Bevel Tool
10º x 37.5º x 4” (102mm) Inside 43-712-01 Inside
Compound bevel tool for most
10º x 37.5º x 4” (102mm) Outside 43-712-02 materials. 1 1/4” (32mm)
maximum wall for both tools
10º x 37.5º x 5” (127mm) Inside 53-705-00 Outside
10º x 30º x 5” (127mm) Inside 53-704-00
4: 1 Taper, counterbore most materials
Requires 60-405-UC Universal
4:1 Taper, Counterbore HSS Tool 60-700-04
Counterbore Slide or 60-428-XX
Bridge Slide
Consult with the factory for other bevel tool applications.

Worldwide Headquarters | 600 Knightsbridge Parkway | Lincolnshire, Illinois 60069 | T: +1.847.537.8800 | F: +1.847.520.1147 | ehwachs.com

©2012 SF0112 60-LIT-01 REV. C


TOOLING CHART
LCSF LOW CLEARANCE SPLIT FRAME

PARTING TOOLS
Description Part Number Application Image
Standard parting,
3/16” x 3 7/16” (4.76mm x 87mm) 43-711-00 most materials up to
HSS Parting Tool (Sever tool) 43-711-00P 1” (25.4mm) wall
(low clearance)

3/16” x 5” (4.76mm x 127mm) 43-711-01 Parting for most materials,


HSS Parting Tool (Sever tool) 43-711-01P up to 1” (25.4mm) wall

Heavy wall parting,


1/4” x 6” (6.35mm x 152mm) 60-711-00
most materials, up to
HSS Parting Tool (Sever tool) 60-711-00P
2” (50.8mm) wall

4.3” (110mm) Carbide Standard parting,


Insert Holder Kit for 3/16” 60-716-00 most materials up to
SUPERSEDES 43-704-00
(4.76mm) parting insert 1 1/2” (38.1mm) wall

60-717-00 For use with 60-716-00


3/16” (4.76mm) Carbide Insert SUPERSEDES 43-705-00 Insert Holder

4.3” (110mm) Carbide Standard parting, most


Insert Holder Kit for 1/4” 60-714-00 materials up to
SUPERSEDES 47-701-00
(6.35mm) parting insert 1 1/2” (38.1mm) wall

60-715-00 For use with 60-714-00


1/4” (6.35mm) Carbide Insert SUPERSEDES 47-702-10 Insert Holder

SINGLE POINT TOOLING


Description Part Number Application Image

HSS Tool Bit for single point


facing, beveling and flange facing. Single point beveling
52-701-01
Standard 3/8” x 3/8” Most materials less than
52-701-01P
(9.53mm x 9.53mm) 32RC hardness
For use with LCSF Bridge Slide.

52-711-01 3/32” (2.38mm) radius

HSS Radius Tool Bit for J-prep 52-711-02 1/8” (3.18mm) radius

52-711-03 3/16” (4.76mm) radius

Heavy wall pipe


Tool Holder for HSS Tool Bit 60-707-00
beveling, all materials

Worldwide Headquarters | 600 Knightsbridge Parkway | Lincolnshire, Illinois 60069 | T: +1.847.537.8800 | F: +1.847.520.1147 | ehwachs.com

©2012 SF0112 60-LIT-01 REV. C

You might also like