Scribd
Upload
110 views

CWWPC

Uploaded by

Jarek Plaszczyca
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF or read online on Scribd
110 views

CWWPC

Uploaded by

Jarek Plaszczyca
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF or read online on Scribd
You are on page 1/ 1
PROFILE DIMENSIONS FOR CLOCK & WATCH WHEEL & PINION CUTTERS {All dimensions as ratios of the module. M. millimetres PTE rissh standard 978 : Part 2, As Swiss Standard NHS 56702 except for * Up to and including | 0.5 and up to and Short form Round Bottom* Module M. 0.45, and 1.1 to 1.5 including 1.0 0.2 to 1.0 0.2 to 1.0 NHS 56704 Number of teeth N N N N Pitch circle diameter NxM NxM NxM NxM Outside or tip diameter [diameter of blank) Root Diameter IN-3.14)xM (N= 4) x Me (N- 2.14) xM (N= 3.50) xM [N+ 2.76) xM IN + 2.76) xM IN +276) xM. [N+ 2.50) x M Tooth thickness ‘Addendum radius ‘Angle of cutter flank ‘Addendum Dedendum Full tooth depth [depth of feed) ‘Al dimensions as ratio of the module. M. milimetes TCO) ESE isn standard 978 : Part 2. As Swiss Standard NHS 56703 except for * Number of leaves Pitch circle diameter Outside or tip diameter| (diameter of blank) Root diameter * 2.84 33 Leaf thickness 1.05 1.05 ‘Addendum radius 1.05 1.05 FULL OGIVE Form of addendum PROFILE C Angle of cutter flank 17-9) Tooth/pitch ratio ‘Addendum Dedendum Full tooth depth * the old fure of 1.75 beng phased out To obtain Bris Sanco 978 Pat 2, cota: Brush standocs nsuze 309 Chsuide High od, London WAAL Tt: 020 996 9001 Fax: 020 89%5 7001 Webste: warbsglebacom Copies ofthe Suite Standard Nes 36702, 95703 and SBTON Wal be sent By On request Mee Of eng P.P. THORNTON (SUCCESSORS) LTD. HOROLOGICAL CUTTER MAKERS The Old Bakehouse, Upper Tysoe, Warwickshire CV35 OTR England Telephone: 01295 680454 Fax: 01295 680067 Website: www.bhi..co.uk

You might also like