To users:

Thank you for your favor with our products.

We are dedicated to providing high performance and high stability radio communication products. This two-way

radio is no exception. The radio is a DMR dual-slot digital walkie-talkie developed and produced by my team with

3000 memory channels, full-color LCD display and full keyboard hand-tuning function. In order to make you fully

understand the various advantages of the radio performance and use and maintenance methods, please read

this manual carefully.

Main Features

 Broadband walkie talkie

Support UV double segment, frequency range UHF400.000-480.000MHz / VHF136.000-174.000MHz

 DMO True2-Slot dual time slot

Direct mode dual-slot communication achieves two groups of calls at a frequency point at the same time, so

that the communication efficiency is doubled and frequency resources are saved

 Digital and analog compatible, smooth over

Support DMR digital and analog two communication modes to ensure that the original analog products

smooth transition to digital products to meet different communication needs

 Digital signaling function

Rich calling modes that support DMR protocol, including single call, group call and all call; supports remote

inhibit function and other applications

 SMS function

Supports SMS, text editing and draft in 64 characters in Chinese and English, so that text messages calls can

be sent when voice call is inconvenient

 High sound quality

This digital two-way radio uses advanced AMBE +2TM voice processing technology to achieve high quality

 Manual writing-frequency

Supports channel / frequency mode, allows manual writing-frequency in frequency mode, and writing-

frequency software can be used to set the required frequency without connecting the computer

 High/low power switch

Meets the power requirements of different call distances to save more energy

 Alarm function
 Supports general alarm and silent alarm in emergency situations

 Digital mode supports the use of relays

 Side buttons can be customized without changing the user’s operating habits

Contents

1. Familiar with this machine------ 4

Key introduction----- 4

Programmable key -------5

2. Safety and Overview------4

Handheld walkie-talkies product safety and radio frequency radiation 4

3. Preparation before use------- 4

Charging -----4

Attachment Installation -------5

Status indication --------4

4. Basic Operations Making and Receiving Calls ---------5

Turn on the walkie talkie --------4

Volume adjustment --------5

Area Selection-------- 5

Select walkie talkie channel, user ID, call group ID --------6

Receive and reply group call --------6

Receive and reply single call----------6

Receive all call --------------7

Start a walkie - talkie call-------------8

Use the channel knob to place a call ------------8

Initiate group call --------------8

Start a single call --------------9

Initiate all call ---------------------9

Use one-touch call button to initiate group call or single call --------------10
5. Emergency alarm function -------------------10

Receive emergency alert ----------------11

Reply to emergency alert -------------------------------12

Send emergency alert ---------------------------12

Send emergency alert with call ------------------------13

Send an emergency alert with voice following-------------- 14

Restart emergency mode --------------15

Exit emergency mode

6. Menu Function Operation -------------------15

Menu navigation --------------------------15

Character input------------------------------ 15

English alphabet pattern: ----------------------16

Pinyin input mode: ------------------------17

Digital Input Mode: --------------------------17

How to use the menu--------------18

walkie talkie detection ------------------18

Send walkie-talkie detection ------------------18

Remote monitoring --------------------19

Start remote monitoring---------------19

Address book settings --------------------------20

Initiated by the address book group call ------------------21

Initiated by address book -----------------------21

Call record function ----------------------22

Check out the latest call number-------------22

Missed call screen ----------------23

Stores the alias or ID in the missed call list --------------------23

Delete the call in the call list -----------------------24

Call prompt operation ----------------------------24

Receive and confirm call alert --------------------------24

 Initiate a call from the communication list----------------25

SMS function--------------25

Edit and send SMS ------------------25

Send pre-sent text messages-----------------26

Send SMS using the one-touch call button --------------------27

Manage sending failed messages ---------------27

Manage sent SMS -----------------29

Receive SMS ----------------------31

View SMS ----------------------32

Manage Received SMS --------------------32

Check your inbox SMS -----------------------33

Reply to inbox message -------------------------33

Delete messages in your inbox--------------34

Delete all messages in your inbox--------------34

Encryption ----------------------35

Basic encryption --------------------35

Dual tone multi frequency (DTMF) ----------------------36

Confidentiality ----------------------36

Walkie talkie remote kill -----------------------36

Walkie talkie activated --------------------37

Scan list --------------------37

View the members in the scan list ------------------38

Scanning instructions and methods ------------------------38

Start and stop scanning -------------------------------39

Press preprogrammed on / off key or enter scan menu function ---------------39

Scan reply--------------------- 39

7. Set --------40

Walkie talkie settings --------------------40

Offline --------------41
 Walkie talkie Tone / Hint ------------41

Mute all -------------------42

Turn on or off keyboard sound ----------------42

Set power level ----------------43

Control the screen backlight -------------------43

Set noise reduction level --------------44

Open or close the boot screen ----------------------45

Lock the key and unlock the key -----------------------45

Language Selection -----------------46

Turn LED on or off----------------46

Turn VOX function on or off ---------------47

Power on password ----------------48

Clock -----------------48

Time -----------------49

Date -------------------49

Mode ---------------------50

Access general walkie talkie information-----------------------50

Check walkie talkie ID --------------------51

Walkie Talkie version --------------------51

walkie talkie configuration ---------------51

Reception frequency --------------------52

Launch frequency -----------------52

Channel name --------------53

Time-out timer -------------54

CTCSS --------------54

CTCSS code ------54

CTCSS decoding -------55

Color code ---------------56

Relay station slot ---------------------56

1. Familiar with this Product

■ Description of Buttons
Switch between transmission and reception; when transmitting, press this button and speak to the
[PTT]Transmit button
microphone; release the button to receive.

Side button 1 Short press this button to quickly switch the upper and lower screen.

* Defaults to Up and down screen

Press and hold it to enter the alarm mode, press and hold it again or press briefly to exit the alarm mode. If
switch
the current channel is digital and no alarm system is configured, the alarm function can’t be started.

Side button 2 Short press shortcut select channel up.

* The default is to select the

Press and hold it to turn on the monitor function (only support analog channels).
channel up

Side button 3 Short press shortcut select channel down.

* The default is to select the

Long press for the power switch, select the high and low power.
channel down

Default: 0~9

[0~9] code words in DTMF function

0-9 number buttons
Select punctuation marks or letters in Pinyin input method.

If numeric shortcut function is set, you can press and hold this button to jump to the corresponding contact.

Press it to activate the menu mode, enter the menu and press this button to select menu items.
[MENU] button
Press and hold it to enter the radio settings.

[]button Move up; change the scanning direction in scanning state.

 Move left in SMS editing interface.

Move down; change the scanning direction in scanning state.

[]button
Move right in SMS editing interface.

Clear the entered information in input state.

[Exit]/[Clear] button
Press and hold this button to switch channel mode or frequency mode.

Press and hold this button to lock on / off keyboard

[*]button
Code word * in DTMF function

Switch the input method in input method interface.

[#]button
Code word # in DTMF function

■ Programmable Buttons
In order to improve the operational convenience, the function shortcut keys provided by this product are 【SK1】 key, 【SK2】 key,

【SK3】 key, 【P1】 key and 【P2】 key. For the specific function, please consult the distributor. For the detailed description of each

function, please refer to the corresponding contents of "Function and Operation".

No. Shortcut name Purpose

1 None No function is assigned to the preset button.

2 All prompt tone

Quickly enable or disable all prompt tones at the same time.
on/off

3 Emergency mode
Quickly establish an emergency call. This is the recommended option for the orange button.
on

4 Emergency mode
Quickly end an emergency call initiated outward.
off

5 Select high/low
Quickly switch between high power and low power.
power

6 Monitor Quickly turn on or off the monitor function.

7 Quickly make digital group calls, digital single call, call prompts, or send text messages (only for digital mode) via

Push to talk 1 push to talk. (This option is only available if the digital function is enabled on the device.) Push-to-talk 1 to push-

to-talk 6 can be set.

8 Relay / offline Quickly switch between relay mode and offline mode.

9 Scan on / off Quickly turn the scan function on or off. Note: double-segment double-waiting scan does not work

10 Strict/normal
Quickly switch between strict squelch and normal squelch (only for analog mode).
squelch

11 Encryption on/off Quickly turn on/off encryption for channel (only for digital mode).

12 Voice control on/off Quickly turn on or off the voice control function.

13 Area switching Quickly select the area, allowing the user to switch between two areas.

14 Quickly access to battery power. The user can check the battery status by LED. The battery power is sufficient if
Battery power
the LED is constantly in green, the battery power is still available if the LED is constantly in yellow, and the battery
indication
power is low if the LED is in red.

15 Individual
Quickly turn on or off individual operation function.
operation switch

16 Recording switch (Based on firmware) to quickly turn on/off the recording

 17 Record playback (Based on firmware) to quickly playback of recordings

18 Delete all the

(Based on firmware) to quickly delete all recordings
recordings

19 1750Hz Fast launch 1750 pilot signal

20 Up and down
Quickly switch the upper and lower screen
screen switch

21 Left key

22 Right key

Note:
●The same button short press and long press can achieve different functions, specific by the dealer settings.

2. Security and overview

RF radiation information

This product is intended for professional applications that meet RF radiation requirements. Users must be aware

of the hazards of RF radiation and take appropriate measures to meet the requirements of RF radiation limit.

Common sense in RF radiation

RF refers to the electromagnetic frequency that can be radiated into space. It is a technology widely used in the

fields of communication, medical treatment and food processing. It will produce some RF radiation during use.

Control and operating instructions of RF radiation

In order to maximize the performance of the product and to ensure compliance with the radiation limits in the

relevant occupational or controlled environment of the above criteria, the sending time shall not exceed 50% of

the rated factor and shall follow the instructions below:

• RF radiation is generated only during transmission (speech) rather than reception (listening) and standby.

• The distance between the terminal and the body during transmission should be at least 2.5 cm.

3. Preparation before use

Charging

Be sure to ensure that the product is off when charging. Battery into the charger may be charging red

flashing constantly flashing, this is the battery power is too low, the charger to protect the battery pre-charge
process, is a normal phenomenon, Generally continue for 30 seconds to turn the red light of the normal state of
charge.

Please use the charging seat specified by our company to charge the battery, the charging seat indicator shows
the charging status.

1. Plug the power adapter into a power outlet;

2. Plug the other end of the power adapter into the socket on the back of the charging cradle;

3. Insert the battery or the battery-equipped product into the charging cradle correctly; the indicator light on the
charging cradle shows the charging status. When the indicator light is red, it indicates the start of charging. When
the indicator turns green, the charging is completed. The specific table below.

Indicator display Current charge status

Red light flashes Battery power is too low
Red light In charging
Green light The charging is completed

Note:
For best battery performance, charge for a minimum of 4 hours on first charge.

■Battery information
●The first use of the battery

Since the battery is not fully charged at the factory, please charge the new battery before use. Under normal

circumstances, the battery when used for the first time, need to charge 4 hours, lithium-ion battery charging

using slow charge or fast charge can be performed when charging. It is recommended that the new battery be

operated as above for the first three uses. When you find the battery power is low, you need to charge the

battery.

●Suitable battery type

Please use the specified battery for charging; use of other batteries may cause explosion, resulting in human

injury.
●Battery safety attention

1. Do not allow metal contacts (including coins, keys, jewelry, or other conductive metal) to be touched by the

battery contacts or pole pieces. Otherwise, the battery may short circuit, discharge, heat or leak, which may result

in damage to the item or personal injury. Therefore, be careful when handling any battery.

2. Do not short-circuit the battery terminals or discard the battery in a fire. Do not disassemble the battery

pack. When the battery is discarded, please put into a dedicated battery recycling box.

●Battery normal operation instructions

★Please charge the battery indoors, battery charging at room temperature best.

★Under normal circumstances, the charger indicator from red to green when the battery is fully charged, at this

time the battery can be removed.

★You can charge when Battery installed in the walkie-talkie, but when charging is best to turn off the walkie

talkie, to ensure that the battery is fully charged.

★Please do not charge the battery when the battery power is not used up (after the battery is exhausted, the

voice prompt alarm will be given), which will shorten the service life of the battery.

★Do not put a fully charged battery back on the charger to "power up" again, as this operation significantly

reduces the cycle life of the battery.

●Extend battery life

★Battery performance will reduce below -20 ℃ temperature conditions. Prepare back-up batteries for use in

colder weather. Please do not throw away cold batteries that cannot work. These batteries may be used at

room temperature.

★Dusting the battery contacts may affect the battery life. Please wipe the contacts with a clean, dry cloth before

inserting the batteries into the walkie-talkie.

●Battery storage needs to know

1.Since the battery will have a self-discharge phenomenon, the battery when not in use for a long time, please

fully charge the battery and then stored to avoid over-discharge of its battery to damage the battery.

2. When the battery is in storage, remove the battery to recharge when stored about 6 months. To avoid over-

discharge of electrolyte affect battery capacity.

3. Pay attention to the temperature and humidity of the battery storage environment. Store the battery at room

temperature in a cool, dry place to minimize self-discharge of the battery.

■Battery Voltage & Power Indication

If the dealer has set the 【battery power prompt】 shortcut key for the product, you can press and hold the

shortcut key to check the remaining battery power by LED indicator, tone and battery icon. Release the shortcut

to cancel viewing the remaining battery power. The top right of the screen shows the current battery power icon

is as follows:

Battery icon Battery power

High

Medium
Low
Insufficient

■ Accessories installation
1. Install / remove the antenna
Turn off the radio and insert the antenna into the mounting hole and turn clockwise. (Figure 1-1)
When removing the antenna, turn it counterclockwise to remove the antenna. (Figure 1-2)

Do not shake the top of the antenna by hand, otherwise it will reduce the working performance and service

life of the antenna.

2. Install / remove the battery
●Install the battery
Align the battery with the battery holder on the back of the walkie-talkie. Push the battery firmly into the
walkie-talkie and slide the battery up until it locks into place. (Figure 2-1)
●Remove the battery
To remove the battery, turn off the transceiver. Slide the battery latch into the unlocked position and hold,
and then slide the battery downward and out of the battery mount.(Figure 2-2)
3. Install / remove the belt clip
●Unscrew the two screws on the battery. Align the two screw holes in the belt clip with the screw holes in the
top of the battery, and then tighten the screws (Figure 3)
●Loosen and remove the screw from the belt clip (it is recommended that you screw the screw to the battery for
the next time you are installing and using the belt clip).
4. Install external headphones / microphone (optional separately)
Open the headset cover, the headset plug into the headset hole will be ok. When you do not need to use the
headset, unplug the headset plug from the earphone jack and cover the earphone cap. When not using the
universal interface, please cover the dust cover. (Figure 4)
■ Status indication
★Description of LCD Icons
Icon name Icon Description of product status
Signal strength
The more signal bars, the stronger the signal is
icon
The current channel transmits at high power
Transmission
M The current channel transmits at middle power
power icon
The current channel transmits at low power
Speaker icon Speaker is enabled, and reception is effective
The current transmission frequency is the reception frequency plus a frequency bias
(positive bias)
Relay mode icon
The current transmission frequency is the reception frequency minus a frequency bias
(negative bias)

Currently in offline state

Scan icon The scan is on and is in normal mode

Battery power
The more bars, the more battery power
icon
Pointer icon Currently pointing to the main digital mode; press A/B button to switch the main channel
up and down. When double-waiting is turned on and works in digital sub-channel, the
icon is
Currently pointing to the main analog mode; press A/B button to switch the main channel
up and down. When double-waiting is turned on and works in analog sub-channel, the
icon is
★LED Indicators
This product has LED indicators so you can easily grasp the current operating state.
Indicator status Product status
Red on Transmitting
Green on Receiving
Green flash Scanning

4. Basic operation
■ Power on and off
To turn on the power, turn the [Power Switch / Volume Control] knob clockwise until you hear a "click" sound
and a short beep sounds. To turn off the radio, turn the knob counterclockwise until you hear a click. (English
version supports channel number broadcast)

If you disable the tone function of this product (setting path: "Menu -> Settings -> Walkie talkie Settings ->

Tones / Tips -> All Tones -> off"), there will be no boot tone.
If all LED's are disabled, the transmit / receive light does not come on during turning on. A short beep sounds to
indicate successful boot detection. (Setting path: "Menu-> Settings-> Walkie talkie Settings-> LED-> off"), the LED
will not light up.
■ Volume adjustment
Turn on the power, turn the [Power Switch / Volume Control] knob clockwise to increase the volume of voice
reception, and turn counterclockwise to reduce the volume of voice reception. When adjusting the volume, the
product LCD displays the corresponding length of the volume bar.
■ Transmit and receive
★Selecting Region
Region is a channel group in which you can include channels with the same attributes (such as call type, digital
mode and analog mode) in a region, which makes it easy for you to manage existing channels. The unit supports
up to 250 regions, and each region contains up to 64 channels. You can select a region in two ways:
 Select from the menu: “MENU-->Region-->Region list”, press []/ [] to select the desired region, and then
press [MENU] to switch to the selected region.
 Select through the programming button: If the dealer has set the [Regional switch] shortcut, you can press
the shortcut to switch to the desired region.
★Add Region
If necessary, you can add a new region and set the path: "Menu-> Area-> New Area", press 【MENU】 key, input
the region name in the new region, edit region name, then press 【MENU】 key Save the new area.

★Digital and analog channel switch

Each channel in this product can be configured by the dealer as either an analog channel or a digital channel. If
the current region contains digital channels and analog channels, you can switch channels to analog channels or
digital channels.

★VFO frequency mode frequency setting

In frequency mode, long press 【BACK】 key on the standby interface, V on the right side of the screen means
that it is in manual input frequency mode. You can manually input the frequency and specify a certain frequency
to transmit.
• Select via menu
Set the path: "Menu-> Settings-> Walkie talkie Settings-> Mode-> Frequency Mode" and then press the [MENU]
key to set the frequency mode.
• Frequency selecting
In addition to press 【】or 【】 key, you can also choose to directly enter the frequency. If the required
operating frequency is far away from the current frequency, you can use the keyboard to enter the frequency
directly. Press the numeric keys ([0] to [9]) to enter the desired frequency (MHZ for the first three digits of the
decimal point and KHZ for the fifth digit after the decimal point).

  Write frequency software configuration path: open the write software -> Edit -> VFO mode -> VFO A ->

digital / analog data -> channel mode -> select "number."

• Or set VFO B to Analog. Normally set VFO A to digital mode and VFO B to analog mode.
★Single / dual band mode switch
When the radio is standby, press 【】/【】 key to switch the primary and secondary channels.
1. The black pointer points to the primary channel and is the digital channel; the other channel is the
secondary channel.
• If the black pointer points to the primary channel and indicates that the channel is an analog channel; the
other channel is the secondary channel.
2. Press 【BACK】 to switch to dual band single standby or dual band dual standby
 If the front of the sub-channel is displayed , it indicates that the product is working in the mode of “dual band
single standby ", and the sub-channel does not receive the signal at this time.
Note: The ARTS Auxiliary function does not work because the dual keep mode is in the primary and secondary
channel scanning status, DTMF, auto-scan and work alone.

★Select channel, user ID, group call ID

   After power on, if you have more than one region in the radio, select the desired region and turn the Channel
knob to select the desired channel, user alias or ID, or the group alias or ID.

★Receive and reply group calls

    To receive a call from a user group, the transceiver must be configured to belong to the talk group.
When receiving a group call:
1. LED indicator light is green.
2. The top line of the screen displays status icons such as RSSI. In the display area below the top line: The first line
shows the group alias for the talk group, the middle shows the caller ID, and the bottom shows the group call icon
(digital only).
3. Hold the walkie talkie in its upright position and at a distance of 1 to 2 inches (2.5 to 5.0 cm) from the mouth
4. Press 【PTT】 key to reply the call, LED indicator light is red.
5. Release the [PTT] key to answer.
6. If there is no voice activity for the scheduled time period, the call is terminated.

  If the walkie talkie receives a group call and is not at home at this time, it remains on the current screen

until the call is answered. Press 【BACK】 to enter the main screen and view the caller's alias before reply.
★Receive and reply single call
    A single call is an individual walkie-talkie call to another individual walkie-talkie. There are two types of single
call types: the first type, the walkie talkie presence test is performed before the call is ready, and the other type is
ready for the call immediately.
When receiving a single call:
1. LED indicator light is green.
2. The top line of the screen shows the status icons such as RSSI. In the display area below the top line, the first
line shows a single call with the user's alias or ID in the middle and the one-way icon at the bottom (digital mode
only).
3. Hold the walkie talkie in a vertical position and keep it 1 to 2 inches (2.5 to 5.0 cm) from the mouth. If the
"Channel Idle Tone" feature is enabled, when the transceiver intercepts the PTT key, you will hear a short beep
indicating that the channel is free for you to answer.
4. Press 【PTT】 key to reply the call, LED indicator light is red.
5. Release the [PTT] key to answer.
6. If there is no voice activity for the scheduled time period, the call is terminated.
7. You will hear a short tone, the screen shows the call ended.

★Receive all call

    All call is an individual walkie-talkie call to all walkie-talkies on the channel. It is used to publish important
notices that require special attention from users.
When receiving all call:
1. LED indicator light is green.
2. The top line of the screen shows the status icons such as RSSI. In the display area below the top line: The first
line shows the All call, the middle shows the user's alias or ID, the bottom shows the all call icon (digital mode
only)
3. After the termination of all calls, the walkie-talkie will return to the screen before receiving the call. If "channel
idle tone" is enabled, you will hear a short tone when the walkie talkie releases the [PTT] key, indicating that the
channel is ready for use and you cannot reply to all calls.

  When you receive an all call, if you switch to another channel, the transceiver stops receiving the full call.

During a full call, you will not be able to use any of the preprogrammed keys until the call is ended.

★Start a walkie-talkie call

    You can choose a channel, user ID or talk group in the following ways:
Channel knob
• Pre-programmed one-touch call button
• Address book list
• Manual Dialing (Via Contacts) - This method is suitable for single calling only and dialing using the keypad

★Use the channel knob to place a call

•Initiate group call
To initiate a call to a user group, the transceiver must be configured to belong to the talk group.
1. Rotate the channel knob to select the channel using the active talk group alias or ID.
2. Hold the walkie talkie in its upright position and keep it at a distance of 1 to 2 inches (2.5 to 5.0 cm) from the
mouth.
3. Press 【PTT】 key to initiate a call, LED indicator light is red. The screen displays the talk group alias or ID, as
well as the group call icon.
4. Release the [PTT] key to answer. When the target radio replies, the LED indicator will light green. The group call
icon, call group alias or ID, and walkie talkie alias or ID is displayed on the screen.
5. If the Channel Idle Tone feature is enabled, when the target radio releases the PTT button, you will hear a short
beep indicating that the channel is free for you to answer. Press the PTT key to answer, or if there is no voice
activity for a predetermined period of time, the call is terminated.
6. The walkie talkie returns to the screen before receiving the call. You can also initiate a group call from your
address book.

•Start a single call

1. Rotate the channel knob to select the channel using the active user alias or ID.
2. Hold the walkie talkie in its upright position and keep it at a distance of 1 to 2 inches (2.5 to 5.0 cm) from the
mouth.
3. Press 【PTT】 key to initiate a call, LED indicator light is red. The top line of the screen shows status icons such
as RSSI. In the display area below the top line, the first line shows a single call, the middle shows a user alias or ID,
and the bottom shows a one-way icon (digital mode only).
4. Release the [PTT] key to answer. When the target radio replies, the LED indicator will light green.
5. If the "Channel Idle Tone" feature is enabled, when the target radio releases the [PTT] key, you will hear a short
beep indicating that the channel is free for you to answer. Press the PTT key to answer, or if there is no voice
activity for a predetermined period of time, the call is terminated.
6. You will hear a short tone, the screen shows the call ended.
  You can also initiate a one-touch address book or make quick contact access via the keyboard entry to find

the desired walkie talkie.

•Initiate all call

    This feature lets you signal all users on the channel. The walkie-talkie must be programmed to allow you to use
this feature.
1. Rotate the channel knob to select the channel using the active full call group alias or ID.
2. Hold the walkie talkie in its upright position and keep it at a distance of 1 to 2 inches (2.5 to 5.0 cm) from the
mouth.
3. Press 【PTT】 key to initiate a call, LED indicator light is red. The screen displays the all-call group alias or ID,
as well as the all-call icon.

  Channel users cannot reply to all calls.

★Use the one-touch call button to initiate a group call or a single call
   One-touch calling features make it easy to group calls or single calls to predefined aliases or IDs. This function
can be assigned to short programming or long programming keys.
You can assign only one alias or ID to a one-touch call key, and the walkie talkie can have multiple programmed
one-touch call keys.
1. Press the preprogrammed one-touch call button to initiate a group or single call to a predefined alias or ID.
2. Hold the walkie talkie in its upright position and keep it at a distance of 1 to 2 inches (2.5 to 5.0 cm) from the
mouth.
3. Press 【PTT】 key to initiate a call, LED indicator light is red. The screen displays the talk group / user alias or
ID, as well as the group call / callout icon.
4. Release the [PTT] key to answer. When the target radio replies, the LED indicator will light green.
5. If the "Channel Idle Tone" feature is enabled, when the target radio releases the [PTT] key, you will hear a short
beep indicating that the channel is free for you to answer. Press the PTT key to answer, or if there is no voice
activity for a predetermined period of time, the call is terminated.
6. The walkie talkie returns to the screen before receiving the call.

★Analog channel call

On the analog channel, hold down the [PTT] key and speak into the microphone, to transmit. Please release
【PTT】 key to receive.

•DTMF call
•Make a call:
 •under the analog channel, press and hold the [PTT] key and press the keypad number key.
• Under analog channel, long press 【 #】 key to switch to manual dialing mode, enter the desired number,
short press 【PTT】 key to start DTMF call.
•Receive calls:
When the host computer has configured DTMF as the receiving signaling system of the current channel, when
decoding the code word is DTMF personal ID code, the decoding is successful. During the resetting time, it can
talk to the other party. The reset time needs to be re-decoded.
•One touch call
Analog mode, program the radio’s one touch calls function:
1. Enter the corresponding DTMF number in DTMF Signaling -> Coding -> Coding Sequence.
2. Programmable Button -> One Touch Access -> Mode -> (Analog) -> SMS / Code -> (Select the corresponding
code number)
3. (Programmable key) -> Walkie-talkie button -> Side key X -> Push to talk X -> (Select the corresponding PTT
serial number)
After the above configuration, press the corresponding side button, you can achieve one touch DTMF launch.

★PTT ID call
•Make a call
In analog mode, you can program the radio to configure the DTMF on-line code and off-line code; and enable
the up-down-line code on the analog channel. When enabled, the code will be sent each time the [PTT] key is
pressed, and the code will be released when the [PTT] key is released.

5. Emergency alarm function

★Emergency alarm
In the event of an emergency, you can use this feature to ask your fellow or control center for help. Emergency
alarm has the highest priority, you can alarm whether the walkie talkie is transmitting or receiving.

  Alarm initiator to exit the alarm mode, there are two cases:

●Turn off the radio to exit the whole machine alarm.

● in other ways, when exiting alarm mode, the alarm on the current channel can only be temporarily exited.
When reselecting the channel, the alarm will continue;

The alarm function is enabled for you by the dealer (program path: "Edit -> Digital Emergency Alarm System ->
Emergency Alarm System -> System1"). Before using this function, you need to understand the following
concepts.

★Alarm Type
The radio prompts in different modes for different alarm types, as shown in the following table.
Alarm type Description
Disable Turn off alarm function (alarm disabled), but it can receive alerts from other radios.
Conventional When alarms, the radio gives an audible and visual prompt.
Silent When alarms, the radio will not give any audible or visual prompt. At the same time, no
sound is made on any received audio.
Silence with When alarms, the radio will not give any audible or visual prompt. However, the radio
voice sounds when you press and hold the PTT button to initiate a call or respond to a call.
★Alarm Mode
Except the alarm type “Disable”, other alarm types support the following alarm modes. You can ask the dealer to
select one of them (Note: The following methods use “Conventional” alarm type as an example).
Alarm mode Description
Emergency In this mode, you can press and hold the [Emergency mode on] button to send an alarm tone
alarm to your partners or control center but can’t talk to the other party.
Emergency In this mode, you can press and hold the [Emergency mode on] button to send an alarm tone
alarm and call to your partners or control center, and then press and hold the [PTT] button to speak to the
(alarm call) microphone, and your voice and surrounding background sound will be sent to the receiver.
Emergency In this mode, you can press and hold the [Emergency mode on] button to enter the alarm
alarm and transmission channel. The product automatically activates the “emergency microphone”
voice (without holding down the PTT button). You can speak to the microphone, and your voice and
(emergency the surrounding background sound will be sent to receiver.
call)

★Receive emergency alert

1. The number of alerts received when an emergency alert was received, along with the alert that was received,
alternating with the sender's alias or ID.
2. A beep sounds and the LED flashes red.
3. If enabled, your transceiver will automatically acknowledge the emergency alert. When the walkie talkie
receives an emergency alert, the screen displays a prompt that an emergency alert has been received, until an
acknowledgment is sent and the emergency mode exits. You will not be able to receive any other prompts or
show any other calls until you exit the screen for receiving an emergency alert.

  Short press 【 BACK 】 key, and then press the pre-programmed alarm close key, clear the prompt of

receiving emergency alarm and exit emergency mode.

★Reply to emergency alert
When receiving an emergency alert:
1. Press any key to stop all audible alerts that have received an emergency alert.
2. Hold the walkie talkie in its upright position and keep it at a distance of 1 to 2 inches (2.5 to 5.0 cm) from the
mouth. If the "channel idle tone" function is enabled, you will hear a short tone when the walkie talkie releases
the PTT key, indicating that the channel is now ready for use.
3. Press 【PTT】 key to start and emergency call to initiate walkie talkie call. LED indicator light is red. The walkie
talkie is in emergency call mode.
4. Release the PTT key to answer. When the emergency call initiates the walkie talkie reply, the LED indicator will
light green. You will see group call icons, talk group IDs, and walkie talkie ID on the screen.
5. When the call is finished, press the [BACK] key briefly and then press the Preset Alarm Off key to clear all
prompts for emergency calls and exit emergency mode.
6. The walkie talkie returns to the home screen.

★Send emergency alert

   This feature allows you to send an emergency alert, which belongs to a non-voice signal and will trigger a
prompt on another transceiver.
1. Press the preprogrammed alarm on button.
2. The screen displays Send Alert, alternating with walkie talkie ID. The LED is lit red and the emergency call icon
appears on the home screen.
3. When an emergency alert confirmation is received, an emergency call tone sounds and the LED flashes green.
The screen shows that the emergency alert was successful.
• Or if the walkie talkie does not receive any emergency alert confirmation and a beep sounds after all retries are
exhausted, the screen displays failed emergency alert.
4. The walkie-talkie exits the emergency alert mode and returns to the home screen. If your walkie talkie is set to
"silent," it will not show any voice or visual cues in emergency call mode.

★Send emergency alert with call

This feature allows you to send an emergency alert to another transceiver. After confirmation, the two walkie
talkies communicate via a pre-programmed emergency channel.
1. Press the preprogrammed alarm on button.
2. The screen displays Send Alert, alternating with walkie talkie ID. The LED is lit red and the emergency call icon
appears on the home screen.
3. When an emergency alert confirmation is received, an emergency call tone sounds and the LED flashes green.
The screen shows that the emergency alert was successful.
4. Hold the walkie talkie in its upright position and keep it at a distance of 1 to 2 inches (2.5 to 5.0 cm) from the
mouth.
5. Press [PTT] key to initiate a call, the LED indicator lights up in red, and the group icon appears on the screen.
6. Release the [PTT] key to answer.
7. If the "Channel Idle Tone" feature is enabled, when the target radio releases the [PTT] key, you will hear a short
beep indicating that the channel is free for you to answer. Press 【PTT】 key to answer.
Or press the pre-programmed alarm close button to exit emergency mode.
8. The walkie talkie returns to the home screen. If your transceiver is set to "Mute," it will not display any voice or
visual cues in Emergency Call mode and will not receive any response (call) from the target transceiver until you
press the {PTT} key to initiate the call. If your transceiver is set to mute with Voice, it will not show any voice or
visual cues in emergency call mode or when you receive a call from the target radio. Only when you press the
[PTT] key to initiate or respond to the call, will prompt.

★Send an emergency alert with voice follow

   This feature allows you to send an emergency alert to another transceiver. After confirmation, your walkie talkie
microphone is activated automatically, allowing you to communicate with other radios without pressing the [PTT]
key. This activated microphone status is called "Emergency Microphone". If the [PTT] key is pressed during the
preprogrammed emergency microphone launch, the transceiver ignores [PTT] press and remains in emergency
mode.

  If you press the [PTT] key during the emergency microphone and continue pressing the key after the

duration of the emergency microphone, the transceiver continues firing until you release the [PTT] key.
1. Press the preprogrammed alarm on button.
2. The screen displays send an alert, the LED is lit red and the emergency call icon is displayed.
3. After the screen shows that the emergency alert is successful, speak clearly toward the microphone. When the
emergency microphone has been activated, the transceiver automatically transmits a signal without pressing the
[PTT] key until the end of the emergency microphone time.
4. While transmitting, the LED is lit red and the emergency call icon appears on the screen.
5. After the emergency microphone duration has expired, the transceiver automatically stops transmitting. To
launch again, press the [PTT] key.
If your walkie talkie is set to "silent," it will not display any voice or visual cues in emergency call mode and will
not receive any response from the target walkie talkie until the preprogrammed emergency microphone period
has expired, and you Press 【PTT】 key. If your transceiver is set to "silent with voice", it will not display any
voice when you place an emergency microphone call in emergency mode, or when the target walkie talkie
responds after the preprogrammed emergency microphone interval Or visual cue. These prompts appear only
when you press the [PTT] key.

  If the emergency alert request fails, the walkie talkie returns to the home screen.

★Restart emergency mode

It can happened in two situations:
• When the transceiver is in emergency mode and changes channel, it will exit emergency mode. If an emergency
alert is activated on the new channel, the transceiver resumes the emergency call.
• Press the preprogrammed alarm on key in the emergency call start / transmit state.  This way the walkie talkie
will exit the status and restart the emergency call.
★Exit emergency mode
The transceiver exits emergency mode when one of the following happened:
• Receive emergency alert confirmation (emergency alerts only), or
• The number of major attempts to send an alert has been reached, or
• Press Preprogrammed Alarm Off, or
• Press the [PTT] key.

If the radio is turn off, it will exist the emergency mode. When you turn on again, the radio won’t start

resume emergency mode

★ Individual Operation
This feature is ideal for people who work alone. If you encounter unexpected situations during individual
operation, you can’t operate the radio in preset time. The radio will automatically send alarm to your partner or
control center for help.
1. Turn on individual operation
 Through writing frequency software, this function is turned on when the radio is started.
 Press the preset [Individual Operation] shortcut to enable this function.
2. If you do not operate the radio in the preset response time, the radio will prompt before the response time is
up (depending on the dealer settings). At this point, you can end the prompt with a valid physical operation (knob
or button operation). When the response time is up, the radio will automatically turn on the alarm system of the
current channel.
3. Turn off individual operation
 Turn this function off by writing-frequency software.
 Press the preset [Individual Operation] shortcut again to turn off this function.
Note: If you do not turn off the individual operation function before shutting down, the function is still active the
next time you turn on the radio.

6. Menu operation
■ Menu navigation
Press 【MENU】 key in digital mode or digital channel to enter the digital main menu; press 【MENU】 key in
analog modem or analog channel to enter the analog main menu. The menu structure is shown as below,
including all the menu items of the product. You can configure whether to display each menu item through the
dealer. You need to first press 【MENU】 key to enter the main menu, then use 【】 / 【】 key to navigate
the desired submenu or option and press 【MENU】 key to confirm and complete the setting . This document
only describes the order of menu items when the menu operation is introduced.. For example, the path to the
contact list is “Contacts” -> “Contacts List”. This product menu will auto reset if you do not operate on the menu
during the preprogrammed time (configured by the dealer), the product automatically returns to the standby
screen. You can ask dealer to modify the auto reset time and cancel auto reset.

■ Input Method
You can enter user aliases, numbers and text messages via the keypad. This product supports the English input
method, Simplified Chinese Pinyin input method, and number input method.

  When inputting user alias, ID or SMS, if there is no content in the editing area, press 【BACK】 to return

to the last menu, Or if there is content in the editing area, press 【BACK】will delete a character in front of the
cursor until Press [BACK] to return to last menu when no editing area exists.

■ English Input Method

1. Press [#] to switch to uppercase (LCD shows ABC) or lower case (LCD shows abc) English input method.
2. Press the number buttons repeatedly until the desired letter appears. Repeat the above steps to complete the
input.
The following form shows the number of keys you have to press for the desired character.
Key 1 2 3 4 5 6 7 8 9 10 11 12 13
1 1 . , ? ! @ & ‘ % - : * #
2 a b c 2 A B C
3 d e f 3 D E F
4 g h i 4 G H I
5 j k l 5 J K L
6 m n o 6 M N O
 7 p q r s 7 P Q R S
8 t u v 8 T U V
9 w x y z 9 W X Y Z
0 0 blank
* *
# To switch input mode

■ Simplified Chinese Pinyin Input Method

1. Press [#] to switch to Pinyin input method (LCD shows PY).
2. Press number buttons to enter the pinyin, and the LCD shows the alternate pinyin and corresponding candidate
Chinese characters.
3. Press []/ [] to select the desired pinyin.
4. Press the [MENU] button to move the highlight to the Chinese character area, and press [ ]/ [] to select the
desired Chinese character.
5. Press the [MENU] button to enter the selected Chinese character. Repeat the above steps to complete the
input. Press * key to input *.

■Number Input Method

1. Press [#] to switch to number input method (LCD shows 123).
2. Press the number buttons 0~9 to enter the corresponding number. Press * key to input *.

■Input Special Characters

Press number button [1] to enter commonly used punctuation and special characters. To enter a space, press the
[0] button.
Note: In the input text display area, press []/ [] to move the cursor left / right.

■How to use the menu

    1. Press 【MENU】 to enter the menu mode, then press 【】 / 【】on left or right to access the menu
function;
    2. Press 【MENU】 key to select a function or enter a sub-menu;
3.Press 【BACK】 to return to last menu.

The transceiver will automatically exit the menu and return to the main screen after a period of inactivity

(the hang time is set by the programming software)

■Push-to-call
You can ask the dealer to set [Push-to-call] shortcut, and press the shortcut to initiate the corresponding
operation. Specific operation categories are as follows:
Business on digital channels:
» For group call contacts, you can initiate a group call or send text message.
» For single call contacts, you can initiate single call, send text message, and initiate application function.
Application functions include: call prompt, radio detection, remote monitor, activation, and remote inhibit.
■Call prompt
In digital mode, you can send call prompt to a contact, and the other party can call back directly
 Initiate call prompt:
Select single call contact (enter “Menu -> Contacts ->Press []/[] to select single call contact ->Call prompt”), or
press the * button in the main interface to enter single call number, select “Call prompt”, and press the[MENU]
button to start;“Call prompts successful” displays if it is successful, and “Call prompt failed” displays if fails.
 Receive call prompt:
After receiving the call prompt command, a tone rings (tone function is enabled for the caller’s contact in the
contact list) and stays in the display interface. Press [EXIT] to exit.
■Radio detection
In digital mode, you can initiate radio detection to a contact without interfering with each other to confirm
whether the other party has turned on the unit or uses in the current channel.
 Initiate radio detection:
Select single call contact (enter “Menu -> Contacts -> Press []/[] to select single call contact ->Radio detection”),
or press the * button in the main interface to enter single call number, select “Radio detection”, and press the
[MENU] button to start; “Radio detection is successful” displays if it is successful, and “Radio detection failed”
displays if fails. When the radio detection is successful, you can press PTT to call the other party.
 Receive radio detection:
Reply automatically after receiving radio detection command.
■Remote monitoring
In digital mode, you can remotely activate the microphone of a contact, and monitor the voice and background
sound of the other party.
 Initiate remote monitor:
Select single call contact (enter “Menu -> Contacts -> Press []/[] to select single call contact ->Remote monitor”),
or press the * button in the main interface to enter single call number, select “Remote monitor”, and press the
[MENU] button to start; “Remote monitor is successful” displays if it is successful, and “Remote monitor failed”
displays if fails. When the radio detection is successful, you can monitor the background sound and voice of the
other party.
 Receive remote monitor:
After receiving the remote monitor command, it automatically starts transmitting voice and surrounding
environment background sound, and exits automatically when the transmission time is up.
Note: This function works only if the function is set and turned on by writing-frequency software.
■Radio activation
In digital mode, you can send an activation command to a contact to resume normal use of the two-way radio.
 Initiate radio activation:
Select single call contact (enter “Menu -> Contacts -> Press []/[] to select single call contact ->Radio activation”),
or press the * button in the main interface to enter single call number, select “Radio activation”, and press the
[MENU] button to start; “Radio activations successful” displays if it is successful, and “Radio activation failed”
displays if fails.
 Receive radio activation:
After receiving the radio activation command, send activation tone, re-shutdown and then boot. It can also be
activated by writing frequency software.
Note: This function works only if the function is set and turned on by writing-frequency software.
■Radio remote kill
In digital mode, you can send a remote inhibit command to a contact, so that the radio can’t be used normally.
 Initiate remote kill:
Select single call contact (enter “Menu -> Contacts -> Press []/[] to select single call contact ->Radio inhibit”), or
press the * button in the main interface to enter single call number, select “Radio inhibit”, and press the [MENU]
button to start; “Radio inhibit is successful” displays if it is successful, and “Radio inhibit failed” displays if fails.
 Receive remote kill:
After receiving the radio inhibit command, send inhibit prompt tone, and press the [PTT] button to display
“Transmission failed and inhibited”. It can be activated by SMS writing frequency or wake-up.
Note: This function works only if the function is set and turned on by writing-frequency software.

■Contact list settings

   Contact list provides "Address Book" for handheld walkie-talkies. Each entry corresponds to an alias or ID used
to initiate the call. In addition, each entry is related to one of three types of call depending on the setting: group
call, single call, all call. Your walkie talkie supports digital contacts.
   The entry in the contact list shows the following information:
   • Call type
   • Call alias
   • Call ID
 You can add, delete, or edit contacts to your digital contact list.
■Group call from the contact lists
1. Press 【MENU】 key to enter the menu mode.
2. Press 【】/【】 key to contact list, then press 【MENU】 key to select, the items will be arranged in
alphabetical order.
3. Press 【】/【】 to the desired group name or ID.
4. Hold the walkie talkie in its upright position and keep it at a distance of 1 to 2 inches (2.5 to 5.0 cm) from the
mouth.
5. Press 【PTT】 key to initiate a call, LED indicator light is red. The screen displays the talk group alias or ID, as
well as the group call icon.
6. Release the [PTT] key to receive. When any user in the group responds, the LED will light green. You will see the
group call icon user ID on the screen.
7. If the "Channel Idle Tone" feature is enabled, when the target radio releases the [PTT] key, you will hear a short
beep indicating that the channel is free for you to answer. Press the call key (PTT) to answer. If there is no voice
activity during the preprogrammed group call hang-up time, the call is terminated.

■Single call from your contact list

1. Press 【MENU】 key to enter the menu mode.
2. Press 【  】 / 【  】 key to contact list, then press 【 MENU 】 key to select, the items are arranged in
alphabetical order.
3. Press 【】/【】 to the desired user alias or ID.
Or press 【】/【】 key to dial manually, then press 【MENU】 key to select. If there is a user alias or ID
dialed previously, the ID is displayed with the blinking cursor and the keyboard is used to edit this ID.
Or press 【】/【】 key to dial manually, then press 【MENU】 key to select, use keyboard to input a new ID.
4. Hold the walkie talkie in its upright position and keep it at a distance of 1 to 2 inches (2.5 to 5.0 cm) from the
mouth.
5. Press 【PTT】 key to initiate a call, LED indicator light is red. The first line shows the user's alias or ID, the
second line shows the single and single call icons.
6. Release the [PTT] key to answer. When the radio responds, the radio LED lights up green and the screen
displays the ID of the transmitting user.
7. If the "Channel Idle Tone" feature is enabled, when the target radio releases the [PTT] key, you will hear a short
beep indicating that the channel is free for you to answer. Press the call key (PTT) to answer. If there is no voice
activity during the preprogrammed single call hang-up time, the call is terminated.
8. You will hear a short tone; the screen shows the termination of the call.

  If you release the PTT key while the walkie talkie is setting up a call, it exits without any hint and returns to

the previous screen. walkie talkies can be preprogrammed to perform walkie-talkie presence detection prior to
setting up a single call. If the target walkie talkie does not answer, you will hear a short beep, and the other party
does not answer on the screen. The walkie-talkie returns to the menu before starting the walkie talkie presence
test.
■Call log
   Your transceiver can record all dialed, picked-up and missed calls recently. Use call logging to view and manage
calls recently.
■Check the latest call number
Menu items have missed calls, received calls and dialed calls.
1. Press 【MENU】 key to enter the menu mode.
2. Press 【】/【】 key to call record, then press 【MENU】 key to select.
3. Press 【】/【】 to the desired list, then press 【MENU】 key to select.
4. The screen shows recent entries at the top of the list.
5. Press 【】/【】 key to view the list, press 【PTT】 key to start a call with the currently selected alias or ID.
■Missed call screen
Whenever a missed call is placed, the transceiver will display a missed call message, select to view or check later.
 If you press the PTT key when viewing missed call numbers, the radio exits the Missed Call Screen and establishes
a one-way call.
1. The screen displays Missed Calls, Missed Calls and View.
2. Press 【 MENU 】 key to check missed call ID, missed call record list will be displayed on the screen. Press
【MENU】 to save or delete this item; or press 【】/【】 key to check later, then press 【MENU】 key to
select and return to the main screen.
■Store an alias or ID from the list of missed calls
1. Press 【MENU】 key to enter the menu mode.
2. Press 【】/【】 key to call record, then press 【MENU】 key to select.
3. Press 【】/【】key to missed call, then press 【MENU】 key to select.
4. Press 【】/【】 key to the missed call alias or ID, then press 【MENU】 key to select.
5. Press【】/【】key to save, then press 【MENU】 key to select.
6. A blinking cursor appears, enter the ID's alias if needed, and then press the {MENU} key.
7. The screen shows that the contact has been saved.
You can also enter an alias ID.
■Delete the call in the call list
1. Press 【MENU】 key to enter the menu mode.
2. Press 【】/【】 key to call record, then press 【MENU】 key to select.
3. Press 【】/【】 key to the desired list, then press 【MENU】 key to select.
4. Press 【】/【】 key to the desired alias or ID, then press 【MENU】 key to select.
5. Press 【】/【】 to delete the entry? , Then press 【MENU】 key to select whether to delete the item.
6. Select "Yes" to delete the entry by pressing the [MENU] key. The entry appears on the screen. Or, select "No"
and press the [MENU] key to return to the previous screen.
When you select a call list but there is no entry in it, the screen will display a blank list. At this moment, if the
keyboard tone is on, a bass tone sounds.
■Calling prompt operation
Call Alert Allows you to prompt a specific walkie talkie user to call you back when possible.
This feature is only available for user aliases or IDs, and can be accessed via the menu via Contacts or Manual
Dialing.
■Receive and confirm call prompt
When you receive a call alert, the screen displays a call alert, alternating with the alias or ID of the calling walkie-
talkie.
1. You will hear a repeat tone. The LED flashes red.
2. Press and release the [PTT] key to confirm the prompt, or press the [MENU] key to select "Ignore?" To ignored
the call prompt.
■Initiate a call alert from the communication list
1. Press 【MENU】 key to enter the menu mode.
2. Press 【】/【】 key to address book, then press 【MENU】 key to select.
3. Press 【】/【】 key to the desired user alias or ID, then press 【MENU】 key to select.
Or press 【】/【】 key to manually dial, then press 【MENU】 key to select, flashing cursor appears, input
the user ID you want to call, then press 【MENU】 key.
4. Press【】/【】 key to call the prompt, the screen displays the call prompt: <User alias or ID>, and then
press the [MENU] key to indicate that the call has been sent.
5. When the walkie talkie send a call alert, the LED indicator light is red.
6. If you receive a call confirmation, a tone sounds and a call alert appears.
Or if no call alert confirmation is received, a beep sounds and the screen displays a call alert failure.
■ SMS Function
This product supports DMR data function, and allows sending and receiving messages; the maximum length of
each message is 144 characters. And SMS lines cannot be more than 50 lines.
■ Edit and Send Messages
Use the MENU function:
1.Press the【MENU】button to enter into the MENU mode.
2.Press the【】/【】button, Select “SMS “,press the【MENU】button to make a choice.
3.Press the【】/【】button, Select “Write SMS”, press the【MENU】button to make a choice.
4.When blinking cursor appears, input the SMS by the keyboard, press the【】button to move to left one, press
the【】button to move to right one.
press 【 BACK 】 button to delete any useless character when there are contents in the edit area, or else it will
return to the upper menu when there is no content in the edit area.
5.After finish the SMS content, press the【MENU】button to send or save.
6.When editing the SMS content, by pressing the 【MENU】button to clear the options and clear all the edited
contents, can return to the upper menu firstly.
7.After send, press the【】/【】button to the required name or ID, then press the 【MENU】button to make
a choice.
Or press the【】/【】button to Manual Dialing, then press the【MENU】button to make a choice, input the
user ID and press the【MENU】button.
8. The LCD shows the SMS :< User/Call group alias or ID>, confirm that the SMS is being sent.
9. If the message sent successfully, a beep sound, and the screen shows the message has been sent.
Or if the message has not been sent, a high-pitched tone sounds and the screen shows that the message has
failed to be sent. If the message fails to be sent, the radio will return to the re-send selection screen.
■ Send Prefabricated SMS
This product supports at most 50 prefabricated SMS programmed by the agent.
When a text message is predefined, you can edit each message before sending it.
1.Press the【MENU】button to enter into the MENU mode.
2.Press the【】/【】button to select “SMS”, press the【MENU】button to make a choice.
3.Press the【】/【】button to select “Prefabricated SMS”, press the【MENU】button to make a choice.
4.Press the 【  】 / 【  】 button to select required Prefabricated SMS ,press the 【 MENU 】 button to make a
choice.
5. When blinking cursor appears, input the SMS by the keyboard, press the [◁] button to move to left one, press
the[▷]button to move to right one. press 【 BACK 】 button to delete any useless character when there are
contents in the edit area, or else it will return to the upper menu when there is no content in the edit area.
6.After finish the SMS content, press the【MENU】button to send or save.
7.When editing the SMS content, by pressing the 【MENU】button to clear the options and clear all the edited
contents, can return to the upper menu firstly.
8.After send, press the【】/【】button to the required name or ID, then press the 【MENU】button to make
a choice. Or press the【】/【】button to Manual Dialing, then press the【MENU】button to make a choice,
input the user ID and press the【MENU】button.
9. The LCD shows the SMS :< User/Call group alias or ID>, confirm that the SMS is being sent.
10. If the message sent successfully, a beep sound, and the screen shows the message has been sent.
Or if the message has not been sent, a high-pitched tone sounds and the screen shows that the message has
failed to be sent. If the message fails to be sent, the radio will return to the re-send selection screen.
■ Use the one-touch call button to send prefabricated SMS
1. Press the pre-programmed one-touch call; send a prefabricated SMS to a predefined alias or ID.
2. The LCD shows the SMS :< User/Call group alias or ID>, confirm that the SMS is being sent.
3. If the message sent successfully, a beep sound, and the screen shows the message has been sent.
Or if the message has not been sent, the screen shows that the message has failed to be sent. If the message fails
to be sent, the radio will return to the re-send selection screen.

Manage the failed SMS

In the re-send selection screen, you can choose below options:
• Re-send
• Forward
• Edit
Re-send SMS
1.Press the【MENU】button to re-send the same SMS to the same user/call group alias or ID.
2. If the message sent successfully, a beep sound, and the screen shows the message has been sent.
Or if the message has not been sent, the screen shows that the message has failed to be sent.
Forward SMS
Choose forward to send the SMS to another user/call group alias or ID.
1.Press the【】/【】button to select “Forward” ,press the【MENU】button to make a choice.
2.Press the【】/【】button to required alias or ID ,press the【MENU】button to make a choice.
Or press the【】/【】button to Manual Dialing, then press the【MENU】button to make a choice, input the
user ID and press the【MENU】button.
3. The LCD shows the SMS :< User/Call group alias or ID>, confirm that the SMS is being sent.
4. If the message sent successfully, a beep sound, and the screen shows the message has been sent.
Or if the message has not been sent, a high-pitched tone sounds and the screen shows that the message has
failed to be sent.
Edit SMS
Choose Edit to write SMS before send it out.

If there is a subject line (as to the SMS received from the Email program), then you can’t edit to this subject

line.

1.Press the【】/【】button to Edit, then press the【MENU】button to make a choice.

2.When blinking cursor appears, input the SMS by the keyboard, press the【】button to move to left one, press
the【】button to move to right one.
press 【 BACK 】 button to delete any useless character when there are contents in the edit area, or else it will
return to the upper menu when there is no content in the edit area.
3.After finish the SMS content, press the【MENU】button to send or save.
4.When editing the SMS content, by pressing the 【MENU】button to clear the options and clear all the edited
contents, can return to the upper menu firstly.
5.After send, press the【】/【】button to the required name or ID, then press the 【MENU】button to make
a choice.
Or press the【】/【】button to Manual Dialing, then press the【MENU】button to make a choice, input the
user ID and press the【MENU】button.
6. The LCD shows the SMS :< User/Call group alias or ID>, confirm that the SMS is being sent.
7. If the message sent successfully, a beep sound, and the screen shows the message has been sent.
Or if the message has not been sent, a high-pitched tone sounds and the screen shows that the message has
failed to be sent.
Manage the already sent SMS
The SMS was sent to another radio, it will be saved to “Sent item” file. The sent SMS will be always added to the
top list of “Sent item”. The “Sent item” file can store at most 50 SMS sent recently. When the file is full, the next
sent SMS will automatically update the SMS record.

Press the【BACK】button to return to the previous screen at any time.

Read the already sent SMS

Use the Menu function:
1.Press the【MENU】button to enter into the MENU mode.
2.Press the【】/【】button, Select “SMS” ,press the【MENU】button to make a choice.
3.Press the【】/【】button, Select “Sent SMS”, press the【MENU】button to make a choice.
4.Press the【】/【】button to required SMS, then press the【MENU】button to make a choice.
If the SMS was sent by Email program, it will appear a subject line, the icon at the top right of the screen indicates
the state of the SMS.
Send the already sent SMS
When read the already sent SMS, you can choose below options:
• Re-send
• Forward
• Edit
• Delete
1.When reading the SMS, press the【MENU】button again.
2.Press the【】/【】button, Select “Re-send”, press the【MENU】button to make a choice.
3. The LCD shows the SMS :< User/Call group alias or ID>, confirm that the same SMS is being sent to the same
radio.
4. If the message sent successfully, a beep sound, and the screen shows the message has been sent.
Or if the message has not been sent, a high-pitched tone sounds and the screen shows that the message has
failed to be sent.
If the message fails to be sent, the radio will return to the re-send selection screen. Press the 【MENU】button to
re-send to the same user/call group alias or ID.

Besides press the【MENU】button and the【】/【】button, you can return to this SMS by changing

the volume or pressing any other button.

The radio will exit the re-sent selection screen when you press the【MENU】 button to make a individual call or
group call or when you response to group call. And you receive SMS/telemetry message/an emergency call or an
alarm. Or you receive a call alert; the radio will also exit the re-sent selection screen. The screen list will return to

the re-sent selection mode when you press the 【MENU】button to response to individual call(except when the
radio indicates the call screen is not received), or when the group call finished. By pressing the【】/
【】button, enter into the transfer/edit/delete selection screen.
• Choose Transfer; send the selected SMS to other group call/user alias or ID.
• Choose Edit, edit the SMS before send it out.
• Choose Delete, delete the selected SMS.

If you exit the SMS sent screen when you send the SMS, the radio will update the SMS state in the “Already

sent item” file, and will not show the reminder or any beep. If the radio mode changed or out of power before
the “Already sent item” updated, the radio will not handle the sending SMS, and will show a icon indicated sent
failed. Our radio will solve 5 SMS at the same time. And the radio can’t send new SMS and will automatically
show a icon indicated sent failed at this stage.
Delete the already sent SMS in “Already sent item” file
Use the Menu function:
1.Press the【MENU】button to enter into the MENU mode.
2.Press the【】/【】button, Select “SMS ”,press the【MENU】button to make a choice.
3.Press the【】/【】button, Select “Sent SMS”, press the【MENU】button to make a choice.
4.Press the【】/【】button to “Delete ALL”, then press the【MENU】button to make a choice.
5.Press the【MENU】button when delete SMS. And choose “YES”, the screen will indicate the entire sent item is
cleared.
Or Press the 【 】/ 【 】button to “NO” when delete SMS, and press the 【 MENU 】button to return to the
previous screen.
When you choose ”Already sent item” and find there is no SMS, the screen will indicate there is empty in the list,
and if the key tone is opened, a low tone beep sounds.
Receive SMS
When your radio is receiving a SMS, the screen displays the sender's alias or ID and a text message icon on the
left.
When receive SMS, you can choose below options:
• Read
• Read later
• Delete

If you press the【PTT】button while the radio is displaying the prompt screen, the radio will exit the SMS

prompt screen and establishes a individual call or group call.

Check the SMS
1.Press the【】/【】button to Read, then press the【MENU】button to make a choice.
2. When the chosen SMS opened in the inbox and this SMS was sent from Email program, and then it will appear
a subject line.
3.Press the【MENU】button to return to the inbox.
Or press the【MENU】button to reply/transfer/delete SMS.
Press the【】/【】button to enter into the “Read Later” or delete selection screen.
• Choose “Read Later” and back to the screen before receive SMS.
• Choose delete the received SMS.
Manage the received SMS
This product will save the received message in the Inbox and can store up to 50 received messages.
Support below SMS options:
• Reply
• Transfer
• Delete
• Delete All
Store messages in your inbox according to the most recently received in sequence.

You can return to the previous screen by pressing the【BACK】button at any time.

Read the SMS in the inbox

1.Press the【MENU】button to enter into the MENU mode.
2.Press the【】/【】button, Select “SMS ”,press the【MENU】button to make a choice.
3.Press the【】/【】button to Inbox, press the【MENU】button to make a choice.
4.Press the 【  】 / 【  】 button to read SMS, if this SMS was sent from Email program, then it will appear a
subject line.
5.Press the【MENU】button to the current SMS, then press the【MENU】button again to reply/delete/forward
this SMS.

• Indicates unread message. Indicates read message.

Reply the SMS in the inbox
Use the Menu function:
1.Press the【MENU】button to enter into the MENU mode.
2.Press the【】/【】button, Select “SMS ”,press the【MENU】button to make a choice.
3.Press the【】/【】button to Inbox, press the【MENU】button to make a choice.
4.Press the【】/【】button to required SMS, then press the【MENU】button to make a choice.
if this SMS was sent from Email program, then it will appear a subject line.
5.Press the【MENU】button again to enter into the sub-menu.
6.Press the【】/【】button to reply, then press the【MENU】button to make a choice.
7.Press the【】/【】button Write SMS, then press the【MENU】button to make a choice.
When a blinking cursor appears, edit text messages by the keyboard.
Or press the【】/【】button to the prefabricated SMS, then press the 【MENU】button to make a choice.
After choose the required SMS, a blinking cursor will appear when press the 【MENU】button, and you can edit
your SMS by keyboard if necessary.
8.After finish the edit, press the【MENU】button.
9. The LCD shows the SMS :< User/Call group alias or ID>, confirm that the same SMS is being sent.
10. If the message sent successfully, a beep sound, and the screen shows the message has been sent.
Or if the message has not been sent, the screen shows that the message has failed to be sent.
• If the message fails to be sent, the radio will return to the re-send selection screen.
Delete the SMS in the inbox
Use the Menu function:
1.Press the【MENU】button to enter into the MENU mode.
2.Press the【】/【】button, Select “SMS ”,press the【MENU】button to make a choice.
3.Press the【】/【】button to Inbox, press the【MENU】button to make a choice.
4.Press the【】/【】button to required SMS, then press the【MENU】button to make a choice.
if this SMS was sent from Email program, then it will appear a subject line.
5.Press the【MENU】button again to enter into the sub-menu.
6.Press the【】/【】button to delete, then press the【MENU】button to make a choice.
7.Press the【】/【】button to “YES” when the Delete appears, then press the 【MENU】button to make a
choice.
8. The screen will show the SMS has been deleted.
9. The screen will return to the inbox.
Delete all the SMS in the inbox
Use the Menu function:
1.Press the【MENU】button to enter into the MENU mode.
2.Press the【】/【】button, Select “SMS ”,press the【MENU】button to make a choice.
3.Press the【】/【】button to Inbox, press the【MENU】button to make a choice.
4.Press the【】/【】button to delete all, then press the【MENU】button to make a choice.
5.Press the【】/【】button to “YES” when the Delete appears, then press the 【MENU】button to make a
choice.
6. The screen will show the inbox was emptied.
When you choose”Inbox” and find there is no SMS, the screen will indicate there is empty in the list, and if the
key tone is opened, a low tone beep sounds.
Encryption
Enabling encryption helps prevent unauthorized access to eavesdropping by other users who are on the channel
and use the software encryption method. The transmitted signal and user identification parts are not encrypted.
Your radio must have been encrypted on the channel to enable to send encrypted transmissions, even when it is
not necessarily required to receive transmissions.
Basic Encryption
The radio can only be assigned one of the above encryption types. To decrypt an encrypted call or data
transmission, the radio which need to be pre-programmed and the transmission radio must have the same
"Encryption Key" (for Basic Encryption).
If your radio receives encrypted calls with different encryption keys or different key values and key IDs, you will
hear the chaotic transmission sound (basic encryption).
Press the Pre-programmed Encryption button to turn on or turn off the encryption.
ANI ID code display

Under the Analog mode, you can set PTT ID by the program software.
The program software operation route: Channel information-> Analog data-> Display PTT ID, tick this option, the
LCD will display the ANI ID code when receive the DTMF signal.
Confidentiality
You can active or remote kill any radio in the system. For example, you maybe want to stop using a stolen radio to
avoid the radio being used by the thief, and you want to re-start it when you get back.

Performing radio remote kill and activation is limited to active the radios with these functions.

Activate or remote kill function of the host computer settings

In the program software, perform as below steps:
1. Edit-> DTMF-> Signal ->Decode ->Response style, chose activation/remote kill.
2. DTMF number-> input corresponding number.
3. In the channel information, choose the corresponding receive signal system (same system as step 2) tick the
decode X (the same number as step 2)
4. When receive the corresponding DTMF number, the activation and remote kill function will be achieved.
Radio remote kill
Use the Menu function:
1.Press the【MENU】button to enter into the MENU mode.
2.Press the【】/【】button to the contact list ,then press the【MENU】button to make a choice, entries are
in alphabetical order.
3.Press the【】/【】button to the required alias or ID, then press the【MENU】button to make a choice.
Or press the【】/【】button to manual dialing, then press the【MENU】button twice to input the user alias
or ID, and then press the【MENU】button to make a choice.
4.Press the【】/【】button to radio remote kill, then press the【MENU】button to make a choice.
5. The LCD shows the radio remote kill: <User alias or ID> and the red LED light flash.
6. Wait for confirmation.
7. If success, a beep sound, and the screen indicate the radio successfully remote killed.
• Or if failed, a beep sound, and the screen indicates it is failed to remote kill.
• During the remote kill period, please don’t press the 【 BACK 】 button, because you will not
receive the confirmation information any more.
Radio Activation
Use the Menu function:
1.Press the【MENU】button to enter into the MENU mode.
2.Press the【】/【】button to the contact list ,then press the【MENU】button to make a choice, entries are
in alphabetical order.
3.Press the【】/【】button to the required alias or ID, then press the【MENU】button to make a choice.
Or press the【】/【】button to manual dialing, then press the【MENU】button twice to input the user alias
or ID, and then press the【MENU】button to make a choice.
4.Press the【】/【】button to radio activation, then press the【MENU】button to make a choice.
5. The LCD shows the radio activated: <User alias or ID> and the red LED light flash.
6. Wait for confirmation.
7. If success, a beep sound, and the screen indicate the radio successfully activated.
• Or if failed, a beep sound, and the screen indicates it is failed to activate.
• During the radio activation, please don’t press the【BACK】button, because you will not receive
the confirmation information any more.
Scan the list
The scan function helps you to receive the communication activity from other channels or groups call, further to
know the current activity of the relative team members. The radio can support up to 250 scan lists with a
maximum of 32 members. Every scan list supports the mix of analog and digital channels. You can add/delete
channel or prioritize channel by editing scan list.
Read the scan list
1. Use the channel knob to choose a channel with pre-programmed scan list;
2.Press the【MENU】button to enter into the MENU mode;
3.Press the【】/【】button to scan, then press the【MENU】button to make a choice;
4.Press the【】/【】button to read the list, then press the【MENU】button to make a choice;
5.Use the【】/【】button to read every member in the list.
• If you set the priority, the priority icon will be displayed to the left of member alias, that means this

member is priority 1 channel or priority 2 channels , and if the priority is set as , the
icon will not displayed. Several priority 1 channel or priority 2 channels is not allowed in one scan list.
• Or Select to delete a channel in the current scan list, but you cannot delete the first channel in the scan list.
Add scan channel

1.Press the【MENU】button to enter into the MENU mode.

2.Press the【】/【】button to scan, then press the【MENU】button to make a choice.
3.Press the【】/【】button to add channel, then press the【MENU】button to make a choice.
4.Press the【】/【】button to choose the required add channel, then press the 【MENU】button to make a
choice.
5. The screen indicates “Success to add channel” and back to the upper menu automatically.
Scan instruction and method

The radio will check if there are any voice activities to the current channel by pre-program the scan list cycling.

The red LED indicator light flash and the scan icon will appear in the screen.
During the duplex mode scan period, if you are on a digital channel and your radio locks an analog channel,
the digital mode will be automatically switched to analog mode during the entire duration call.
There are two ways to scan:
• Manual scan: start to scan by pre-programming the scan turn on/turn off button or the menu function,
when start to scan, the radio will detect all the channels/group calls pre-set in the scan list.
• Automatically scan: when you choose a channel/group calls which have been activated, the radio will
start to scan from the automatically scanned channel.

Start and stop scan

Press the pre-programmed scan turn on/turn off button or enter into the scan menu function
1. Use the channel knob to choose a channel with pre-programmed scan list;
2.Press the【MENU】button to enter into the MENU mode;
3.Press the【】/【】button to scan, then press the【MENU】button to make a choice;
4. If the scan was stopped, the screen will indicate to open, or if the scan is activated, the screen will indicate to
close.
5.Use the【MENU】button to make a choice.

6. When the scan is activated, the red LED indicator light flash, and the scan icon will appear in the screen;
Or when the scan is stopped, the LED light will be off and no scan icon is displayed.
Scan Reply

During scan, the radio will stop at the channel/group calls when the radio detect activity channel/group calls,
This is called as the pre-programmed time limit for the “Scan suspend time”
Progress:
1. Hold the radio in a vertical position and keep it 1-2 inches (2.5-5.0cm) from your mouth. If the function of

“Free channel beep” enabled. you will hear a short beep sound when release the 【PTT】button, this
indicates the channel is free and wait for your reply.
2.Press the【PTT】button during the suspend time. The LED light is red.
3.Release the【PTT】button to receive.
4.If you don’t response during the suspend time, the radio will go on scanning.
7. Menu setting

Menu setting including:

• Radio setting

• Radio information

• Radio configuration

 Radio setting

You can make the following settings according to your own preferences and actual needs, so as to maximize their
performance.
The setting method: Enter into the menu “Setting ->Radio setting”, select the corresponding setting to set.
The setting items are as below list:
Options and
Setting options Description of operation
Range
ON; the function works only when “Allow offline” of current channel of the host computer is
ON
Offline ticked
OFF OFF
Tone/Prompt Options: Off/On. Turn off all tones when Off is selected, but do not include emergency alarm
All tones
tone tone
Call permission Options: Off / Digital / Analog. Pressing the PTT button will transmit the signal through the
 channel and will sound a tone that prompts the user to start speaking.
 OFF: Turn off this function
 Digital: Enable this tone only for digital channels
 Analog: Enable this tone only for analog channels
Touch-tone Options: Off/On. There is no prompt tone when Off is selected
Transmission Low Low power transmission
power High High power transmission
Normally on Always on (power saving disabled)
Backlight
5~15 sec Turn off the backlight automatically when the time is up
Normally Normally filter the useless calls or background noise
Squelch Level
Strictly Strictly filter the useless calls or background noise
Picture Display according to the picture provided by the customer
Boot interface Preset
Two lines, can be edited by host computer
characters
Keypad lock and Manual Press and hold # to lock, press and hold it again to unlock
unlock 5/10/15 sec Auto lock; lock automatically at set time; press and hold # to unlock
Language English English version, including menu, call tips, call logs and all other interfaces
selection Chinese Simplified Chinese
OFF The indicator (transmission, receiving, boot, etc.) does not work when it is off
LED Indicator
ON Default option is on
OFF VOX is turned off;
Voice control
ON It is not necessary to press PTT when this option is on

Power on Input correct password to enter the setup menu; the password can be configured by default on
Enter password
password host computer
Time Set Hour/Minutes/Seconds
O’clock Date Set Year/Month/Date
Time zone choose time zone
Channel display The channel mode is displayed by channel name
Mode selection Frequency
The channel mode is displayed by frequency
display
Single call
match
Group call
match

Off line

In case of the repeater failure or beyond the coverage of the repeater station, but both terminals are in the

other's communication range, at this time, you can press the 【 Off 】 shortcut button to switch to the direct
mode, further to achieve directly communication between two terminals.
Press the pre-programmed 【Repeater / Off 】 shortcut button to open the offline function; press this button
again to turn off this function.
The menu function operated as below:
1.Press the【MENU】button to enter into the MENU mode.
2.Press the【】/【】button to setting, then press the【MENU】button to make a choice.
3.Press the【】/【】button to radio setting, then press the【MENU】button to make a choice.
4.Press the【】/【】button to off line, then press the【MENU】button to make a choice.
5. If the radio is in the repeater station mode, the screen indicates “turn off”, or if the radio is under off-line
mode, the screen indicates “turn off”.
6. Press the【MENU】button to make a choice.

7. The screen indicates the off-line is turn on, the icon flash, or the screen indicates off-line is turn off.

8. The screen back to the upper menu automatically.

• Even when the radio is turn off, the radio is kept off-line situation.

Radio tone/Prompt tone

Including below options:

• All tones
• Call permission
• Keyboard tones
All tones

If necessary, you can start or stop all the radio tones and prompt tones (except the emergency tones)
Turn on or turn off all the radio tones according to the all tones on/off by pre-programmed.
The menu function operated as below:
1.Press the【MENU】button to enter into the MENU mode.
2.Press the【】/【】button to setting, then press the【MENU】button to make a choice.
3.Press the【】/【】button to radio setting, then press the【MENU】button to make a choice.
4.Press the【】/【】button to tone/prompt one, then press the【MENU】button to make a choice.
5.Press the【】/【】button to all tones, then press the【MENU】button to make a choice.
6.Press the 【 MENU 】 button to choose turn on, then all the tones and prompt tones started, the screen
indicates” All tones applied”
• Or press the 【MENU】button the choose turn off, then all the tones and prompt tones turned off, the
screen indicates “All tones cancelled”
 Turn on or off the keyboard sound
If needed, you can activate and deactivate keyboard sounds of keystrokes. The menu functions as follows:
1. Press【MENU】to enter menu mode.
2. Press【】/【】to set, then press【MENU】to select.
3. Press【】/【】to the radio setting, then press【MENU】to select.
4. Press【】/【】to tone/hint, then press【MENU】to select.
5. Press【】/【】to keyboard sound, then press【MENU】to select.
6. Press 【 MENU 】 and select open, then turn on keyboard sounds, and screen will display "keyboard sound
application".
• Press 【 MENU 】 and select close, then turn off keyboard sounds, and screen will display "keyboard sound
cancellation"

 Setting transmitting Power

This function can achieve quick switch of high/medium/low power. When communication distance meets your
requirements, low power can be selected to save power. When low power does not enable you to communicate
with other walkie-talkies away from distance, and then please choose high power.
According to the preprogrammed [Power Level Adjustment] shortcut keys, switch transmitting power of the
current channel between high, medium and low. You can set the transmitting power level of each channel to be
high or low. The menu functions as follows:
1. Press【MENU】to enter menu mode.
2. Press【】/【】to set, then press【MENU】to select.
3. Press【】/【】to the radio setting, then press【MENU】to select.
4. Press【】/【】to transmitting power, then press【MENU】to select.
5. Follow the screen prompt to change the current Settings.
6. Press【MENU】to select new power level.
7. Return to the previous menu.
Press【BACK】return to the home screen, and screen displays the power level icon

An H above the screen indicates the current high power; M indicates the current medium power; L indicates

the current low power.

 Setting screen backlight

You can turn on or off the screen backlight of the walkie-talkie if needed. This setting will also affect the back light
of the menu and numeric keyboard.
According to the pre-programmed backlight automatic on-off key, switches backlight Settings. The menu functions
as follows:
1. Press【MENU】to enter menu mode.
2. Press【】/【】to set, then press【MENU】to select.
3. Press【】/【】to the radio setting, then press【MENU】to select.
4. Press【】/【】to backlight, then press【MENU】to select.
5. The screen indicates normally open, 5S, 10S, 15S options, press【MENU】to select normally open, then screen
backlight is always open and light.
• Or if select 5S, 10S, 15S, the screen will turn off the screen backlight without any operation after the
corresponding time.

 Setting squelch level

You can adjust the squelch level of walkie talkie, filters unusable calls of low signal strength or channels of
background noise that higher than normal value.
Normally it is default value (that is regular filtering); strictly filter unwanted calls or background noise, in the same
time, calls from remote locations can also be filtered out.
Press preprogrammed strict/normal squelch key to switch the squelch level between normal and strict.
The menu functions as follows:
1. Press【MENU】to enter menu mode.
2. Press【】/【】to set, then press【MENU】to select.
3. Press【】/【】to the radio setting, then press【MENU】to select.
4. Press【】/【】to squelch, then press【MENU】to select.
5. Choose strict or normal, then press【MENU】to select.
6. Press【BACK】return to the home screen.

 Turn on or off the boot screen

If needed, you can enable and disable the boot screen display. The menu functions as follows:
1. Press【MENU】to enter menu mode.
2. Press【】/【】to set, then press【MENU】to select.
3. Press【】/【】to the radio setting, then press【MENU】to select.
4. Press【】/【】to the boot screen, then press【MENU】to select.
5. The screen displays open, press【MENU】to enable the boot screen display, and the screen displays it is open.
• Or the screen shows off and press【MENU】to turn off the boot screen, the screen displays it is close.

The radio’s boot screen can be set to simple images or short characters by software.

 Key locks and unlock

You can lock the radio keyboard to prevent accidental keystrokes. Methods include manual keyboard locking and
automatic keyboard locking; among them the automatic keyboard locking includes 5S, 10S, 15S three time
options. The menu functions as follows:
1. Press【MENU】to enter menu mode.
2. Press【】/【】to set, then press【MENU】to select.
3. Press【】/【】to the radio setting, then press【MENU】to select.
4. Press【】/【】to the keypad lock, then press【MENU】to select.
5. Press【】/【】to manual option, then press【MENU】to select, the screen displays manual selection. The
keyboard needs to be long pressed【*】on the main screen to lock the keyboard.
6. Press【】/【】to 5S,10S,15S, the screen displays the corresponding time. Then, when the user does not
have keyboard operation in the corresponding time, the screen shows lock and returns to the home screen.
7. To unlock the keyboard, press【MENU】first ,then press【*】
8. The screen shows the keyboard unlocking and returns to the home screen.

 Language selection
This radio supports both Chinese and English language. The menu functions as follows:
1. Press【MENU】to enter menu mode.
2. Press【】/【】to set, then press【MENU】to select.
3. Press【】/【】to the radio setting, then press【MENU】to select.
4. Press【】/【】to language selection, then press【MENU】to select.
5. Press【】/【】to select the corresponding language, then press【MENU】to select.
6. The screen shows the language selected and returns to the main screen.

 Turn on or off the LED indicator light

If needed, you can enable and disable the LED indicator light. The menu functions as follows:
1. Press【MENU】to enter menu mode.
2. Press【】/【】to set, then press【MENU】to select.
3. Press【】/【】to the radio setting, then press【MENU】to select.
4. Press【】/【】to the LED indicator light, then press【MENU】to select.
5. The screen displays open, press【MENU】to enable the LED indicator light, and the screen displays it is open.
• Or the screen shows off and press【MENU】to turn off the LED indicator light, the screen displays it is close.
If disable the LED indicator light, Keypad and backlight automatically close.

 Turn on or off VOX function

This function allows you to initiate voice activation for hands-free calls on programmed channels. Regardless of
when the microphone on the attachment with VOX function detects the voice, the radio will automatically
transmit the signal during the programmed time period.
Press the【PTT】during the radio operation will disable the VOX function, to re-enable the VOX function need
perform one of the following operations:
• Close and re-open the radio;
• Change channel through channel knob;
• Perform the following procedure:

Enabling or disabling this function that is limited to radio of activating these functions. The voice sensitivity

of VOX is set in the radio configuration.

To turn on or off this function by pre-programmed VOX open/close key.
The menu functions as follows:
1. Press【MENU】to enter menu mode.
2. Press【】/【】to set, then press【MENU】to select.
3. Press【】/【】to the radio setting, then press【MENU】to select.
4. Press【】/【】to the VOX, then press【MENU】to select.
5. The screen displays open, press【MENU】to enable the VOX function.
• Or the screen shows off and press【MENU】to turn off the VOX function.

 Power-on password
The menu functions as follows:
1. Press【MENU】to enter menu mode.
2. Press【】/【】to set, then press【MENU】to select.
3. Press【】/【】to the radio setting, then press【MENU】to select.
4. Press【】/【】to the power-on password, then press【MENU】to select.
5. Type the correct 8-bit password (can preset with the software), then press【MENU】to select.
6. If the password is incorrect, the screen displays the wrong password. Display options if the password is correct.
7. If the first line indicates open, press【MENU】 to display the power-on password application, and then you
need to type the correct password to start the radio at the next boot. If the first line indicates close, press
【MENU】 to display the boot password cancellation, and start the radio directly at the next boot.
8. Press【】/【】to change power-on password, then press【MENU】to select.
9. Type the new 8-bit password, then press【MENU】to select.
10. Type the new 8-bit password again, then press【MENU】to select.
11. Display password change successfully.

The power-on password must be set to 8-bit.

 Clock
Clock setting divided into:
• Time
• Date
• Time zone

 Time
The menu functions as follows:
1. Press【MENU】to enter menu mode.
2. Press【】/【】to set, then press【MENU】to select.
3. Press【】/【】to the radio setting, then press【MENU】to select.
4. Press【】/【】to the clock, then press【MENU】.
5. Press【】/【】to the time, then press【MENU】to select, which indicates the current time.
6. Press【MENU】to enter time setting mode.
7. Press【】/【】to move and choose the number that needs to be changed, the selected number will be
displayed in reverse, then type the corresponding number to change time through numeric keypad.
8. Press【MENU】to save, screen display time saved.

 Date
The menu functions as follows:
1. Press【MENU】to enter menu mode.
2. Press【】/【】to set, then press【MENU】to select.
3. Press【】/【】to the radio setting, then press【MENU】to select.
4. Press【】/【】to the clock, then press【MENU】.
5. Press【】/【】to the date, then press【MENU】to select, which indicates the current date.
6. Press【MENU】to enter time setting mode.
7. Press【】/【】to move and choose the number that needs to be changed, the selected number will be
displayed in reverse, then type the corresponding number to change date through numeric keypad.
8. Press【MENU】to save, screen display date saved.

 Time zone
The menu functions as follows:
1. Press【MENU】to enter menu mode.
2. Press【】/【】to set, then press【MENU】to select.
3. Press【】/【】to the radio setting, then press【MENU】to select.
4. Press【】/【】to the clock, then press【MENU】.
5. Press【】/【】to the time zone, then press【MENU】to select, which indicates the current time zone.
6. Press【】/【】to move and choose the time zone that needs to be changed,
7. Press【MENU】to save, screen display date saved.
 VFO/MR Mode
Mode setting divided into:
• Channel mode
• Frequency mode
1. Press【MENU】to enter menu mode.
2. Press【】/【】to set, then press【MENU】to select.
3. Press【】/【】to the radio setting, then press【MENU】to select.
4. Press【】/【】to the mode setting, then press【MENU】.
5. Press 【  】 / 【  】 to select channel mode or frequency mode, then press 【 MENU 】 to select the
corresponding mode, the screen display the mode is selected.
6. The main interface will display the channel name or frequency (receiving frequency) according to the selected
mode.

In frequency mode, long press 【 BACK 】 to switch between frequency mode and channel mode. In

frequency mode, you can manually type the frequency.

 Single-call matching
The menu functions as follows:
1. Press【MENU】to enter menu mode.
2. Press【】/【】to set, then press【MENU】to select.
3. Press【】/【】to the radio setting, then press【MENU】to select.
4. Press【】/【】to single-call matching, then press【MENU】to select.
5. The screen displays open, press【MENU】to enable the single-call matching.
• Or the screen shows off and press【MENU】to turn off the single-call matching.

Once the single-call matching function has been closed, you will no longer need to match all single-call ID,

enabling direct calls.

 Group-call matching
The menu functions as follows:
1. Press【MENU】to enter menu mode.
2. Press【】/【】to set, then press【MENU】to select.
3. Press【】/【】to the radio setting, then press【MENU】to select.
4. Press【】/【】to group-call matching, then press【MENU】to select.
5. The screen displays open, press【MENU】to enable the group-call matching.
• Or the screen shows off and press【MENU】to turn off the group-call matching.

Once the group-call matching function has been closed, you will no longer need to match all group-call ID,

enabling direct calls.

 Call-interruption function
1. Use software to check "allow interruption" that are set in the channel parameter.
2. If the radio is in a state of transmitting, when received the channel parameter setting "call-interruption
permitted transmitting conditions” for “call-interruption " of another transmitter signals, automatically switch to
the receiving state.

 Radio information query

Check the relevant information of this product, including: the radio number (name of the owner and the serial
number of the radio) and the radio version (firmware version, CPS version, programming time), etc

You can go back to the previous screen at any time by pressing【BACK】.

 Check radio ID
The menu functions as follows:
1. Press【MENU】to enter menu mode.
2. Press【】/【】to set, then press【MENU】to select.
3. Press【】/【】to the radio setting, then press【MENU】to select.
4. Press【】/【】to the radio number, then press【MENU】to select.
5. The screen shows the radio ID and name.

 Check radio version

Check and indicate this radio’s firmware version, CPS version information.
The menu functions as follows:
1. Press【MENU】to enter menu mode.
2. Press【】/【】to set, then press【MENU】to select.
3. Press【】/【】to the radio information, then press【MENU】to select.
4. Press【】/【】to the radio version, then press【MENU】to select.
5. The screen shows the current firmware version, CPS version.
 Radio configuration
The radio configuration is mainly to edit the channel content.
Configure paths: enter the Settings -> radio configuration menu, and select the corresponding configuration items
to configure.
 Receiving frequency
The menu functions as follows:
1. Press【MENU】to enter menu mode.
2. Press【】/【】to set, then press【MENU】to select.
3. Press【】/【】to the radio configuration, then press【MENU】to select.
4. Use the keyboard to type the correct radio configuration password (software Settings), then press【MENU】to
select.
5. Press【】/【】to receiving frequency, then press【MENU】to select.
6. The screen shows the receiving frequency of the current channel, then press【MENU】to select.
7. Press the keyboard to type the corresponding number, press【】to delete the last number, press【BACK】to
return to the previous menu.
8. After the changes, press【MENU】, the screen shows that the receiving frequency has been saved.
Note: According to frequency range of software limit frequency changes when editing and changing frequency, if
less than the frequency range of software, then the final change results will be the minimum value settings on the
software, the opposite is maximum.
 Transmitting frequency
The menu functions as follows:
1. Press【MENU】to enter menu mode.
2. Press【】/【】to set, then press【MENU】to select.
3. Press【】/【】to the radio configuration, then press【MENU】to select.
4. Use the keyboard to type the correct radio configuration password (software Settings), then press【MENU】to
select.
5. Press【】/【】to transmitting frequency, then press【MENU】to select.
6. The screen shows the transmitting frequency of the current channel, then press【MENU】to select.
7. Press the keyboard to type the corresponding number, press【】to delete the last number, press【BACK】to
return to the previous menu.
8. After the changes, press【MENU】, the screen shows that the transmitting frequency has been saved.
Note: According to frequency range of software limit frequency changes when editing and changing frequency, if
less than the frequency range of software, then the final change results will be the minimum value settings on the
software, the opposite is maximum.

 Channel name
The menu functions as follows:
1. Press【MENU】to enter menu mode.
2. Press【】/【】to set, then press【MENU】to select.
3. Press【】/【】to the radio configuration, then press【MENU】to select.
4. Use the keyboard to type the correct radio configuration password (software Settings), then press【MENU】to
select.
5. Press【】/【】to channel name, then press【MENU】to select.
6. The screen shows the current channel name, then press 【 # 】 to switch input method to type the related
letters, numbers, or Chinese characters, and input methods are same as SMS editing.
7. After the changes, press【MENU】, the screen shows that the channel name has been saved.

 Transmit time-out timer

The setting of the time-out timer function prevents the user from occupying the channel for a long time. If the
continuous transmitting time exceeds the time set by the distributor, the radio will stop transmit and make the
warning sound. If want to stop the warning sound, please loose 【PTT】. If you need to transmit again, please
press the PTT button again after a period of time (specifically set by the dealer)
The menu functions as follows:
1. Press【MENU】to enter menu mode.
2. Press【】/【】to set, then press【MENU】to select.
3. Press【】/【】to the radio configuration, then press【MENU】to select.
4. Use the keyboard to type the correct radio configuration password (software Settings), then press【MENU】to
select.
5. Press【】/【】to time-out timer, then press【MENU】to select.
6. The screen shows infinity, 15S, 30S... 555S option (additive increase in the range of 15S), press 【】/【】 to
the corresponding option, then press 【MENU】to select, if you select to infinity, then the screen display turn off
the time-out timer, if you select others, the screen display xxS has been selected.
 In the emergency alarm mode, this function is invalid.

 CTCSS
CTCSS can be set only under the simulated channel, includes:
• CTCSS encode
• CTCSS decode

 CTCSS encode
The menu functions as follows:
1. Press【MENU】to enter menu mode.
2. Press【】/【】to set, then press【MENU】to select.
3. Press【】/【】to the radio configuration, then press【MENU】to select.
4. Use the keyboard to type the correct radio configuration password (software Settings), then press【MENU】to
select.
5. Press【】/【】to CTCSS, then press【MENU】to select.
6. Press【】/【】to CTCSS encode, then press【MENU】to select.
7. The screen shows turn off a group of CTCSS encode number, press 【】/【】to close, then press 【】/
【】to select, there is no CTCSS encode value, the screen shows CTCSS encode is closed;
• Press【】/【】to CTCSS encode value, then press【MENU】to select, which already set the corresponding
CTCSS encode value, the screen displays CTCSS encode XX.
 CTCSS decode
The menu functions as follows:
1. Press【MENU】to enter menu mode.
2. Press【】/【】to set, then press【MENU】to select.
3. Press【】/【】to the radio configuration, then press【MENU】to select.
4. Use the keyboard to type the correct radio configuration password (software Settings), then press【MENU】to
select.
5. Press【】/【】to CTCSS, then press【MENU】to select.
6. Press【】/【】to CTCSS decode, then press【MENU】to select.
7. The screen shows turn off a group of CTCSS decode number, press 【】/【】to close, then press 【】/
【】to select, there is no CTCSS decode value, the screen shows CTCSS decode is closed;
• Press【】/【】to CTCSS decode value, then press 【MENU】to select, which already set the corresponding
CTCSS decode value, the screen displays CTCSS encode XX.
 Add Channel
Method of cooperating MENU:
1. Entering the menu via [MENU] button.
2. Press【】/【】to find SETTING, press [MENU] to confirm.
3. Press【】/【】to find CONFIGURATION, press [MENU] to confirm.
4. Input the correct configuration password (setting by programming), press [MENU] to confirm.
5. Press【】/【】to find Add Channel, press [MENU] to confirm.
6. Press 【  】 / 【  】 to select the channel, then press [MENU] to enter the relevant channel and add the
parameters.
 Color code
Color code refers to a system. The same color code is necessary for the terminals communicating with each other.
The frequency is the integer within 0~15. The color code only can be set in the digital model. Color code can mark
a system, and the terminals that communicate with each other must set the same color code. Method of
cooperating MENU:
1. Entering the menu via [MENU] button.
2. Press【】/【】to find SETTING, press [MENU] to confirm.
3. Press【】/【】to find CONFIGURATION, press [MENU] to confirm.
4. Input the correct configuration password (setting by programming), press [MENU] to confirm.
5. Press【】/【】to find Color code, press [MENU] to confirm.
6. Press【】/【】to select the color code, then press [MENU] to confirm. The color code selected will be in
the display.
 Relay Station Time Slot
The relay time slot refers to the slot for voice communication or data transmission, which only can be modified
within the digital channels. Method of cooperating MENU:
1. Entering the menu via [MENU] button.
2. Press【】/【】to find SETTING, press [MENU] to confirm.
3. Press【】/【】to find CONFIGURATION, press [MENU] to confirm.
4. Input the correct configuration password (setting by programming), press [MENU] to confirm.
5. Press【】/【】to find Relay Station Time Slot, press [MENU] to confirm.
6. Press【】/【】to select the relay station time slot , then press [MENU] to confirm. The time slot selected
will be in the display.

The digital channel of host computer can be configured to dual capacity direct mode. This mode supports

parallel direct mode transmission of two two-way radios transmitting on 12.5KHz channel bandwidth. The radios
in the same communication group must use the same time slot, and the group using slot 1 will not interfere with
the group using slot 2.
 VOX
The higher the level of VOX is, the lower the sensitivity is, and the louder the sound to trigger the VOX function is.
Method of cooperating MENU:
1. Entering the menu via [MENU] button.
2. Press【】/【】to find SETTING, press [MENU] to confirm.
3. Press【】/【】to find CONFIGURATION, press [MENU] to confirm.
4. Input the correct configuration password (setting by programming), press [MENU] to confirm.
5. Press【】/【】to find Color code, press [MENU] to confirm.
6. Press【】/【】to select the color code, then press [MENU] to confirm. The color code selected will be in
the display.

Please adjust the voice gain level correctly according to the current environment and normal speaking

volume, so as to avoid frequent accidental triggering (sensitivity too high) or difficult to trigger voice control
(sensitivity too low).
The sensitivity of voice control transmission can be modified by writing-frequency software, level 1 is the highest
sensitivity level, and level 10 is the lowest sensitivity level.
Transmitting contacts
Transmitting contactor only can be modified within the digital channels. Method of cooperating MENU:
1. Entering the menu via [MENU] button.
2. Press【】/【】to find SETTING, press [MENU] to confirm.
3. Press【】/【】to find CONFIGURATION, press [MENU] to confirm.
4. Input the correct configuration password (setting by programming), press [MENU] to confirm.
5. Press【】/【】to find transmitting contactor, press [MENU] to confirm.
6. Press【】/【】to select the contactor, then press [MENU] to confirm. The contactor selected will be in
the display.
 Group Call List
The group call list only can be modified within the digital channels. Method of cooperating MENU:
1. Entering the menu via [MENU] button.
2. Press【】/【】to find SETTING, press [MENU] to confirm.
3. Press【】/【】to find CONFIGURATION, press [MENU] to confirm.
4. Input the correct configuration password (setting by programming), press [MENU] to confirm.
5. Press【】/【】to find the group call list, press [MENU] to confirm.
6. Press 【 】/ 【 】to select the group call list, which can delete or add the group member. Press 【 】/
【】to add group call list, which can add the new group call.

Main technological specification

Frequency range VHF:136-174MHz/ UHF:400-480MHz(Dual band)
Memory Channel Up to 3000
Frequency Stability ±1.0ppm
Operating Temperature -30℃~+60℃
Operating Voltage DC 7.4V
Demission 133*62*36mm ( no including the antenna)
Weight
Transmission
Output power High:5W Low:1W
Output Consumption Analog≤1.6A Digital≤0.9A
Consumption ≤0.18A
FM modulation 16K¢F3E@25KHz 141K¢F3E@20KHz 11K¢[email protected]
4FSK digital modulation 12.5KHz for data:7K60FXD 12.5KHz for data and voice :7K60FXE

Modulation Distortion ≤5%

Signal-to-noise(wide/narrow) ≥45dB@25KHz ≥[email protected]
Adjacent Channel power ≤-65dB ≤-60dB
Audio Response +1~3dB
Antenna Port Spurious 9KHz-1GHz:  ≤-36dBm 1GHz-12.75GHz:  ≤-30dBm
Digital Protocol ETSI-TS102 361-1,-2,-3
Vocoder type AMBE+2 TM
Reception
Analog receive sensitivity -122dBm (12dB SINAD)
Digital receive sensitivity -120dBm (BER≤5%)
Audio power 1W
Audio distortion <10%
Audio response +1～-3dB
Signal imitation ≥70dB
Intermediation (Wide/ narrow) ≥62dB/≥58dB
Adjacent channel selectivity ≥65dB/≥60dB
Receive Current ≤380mA
PM noise ≥45dB@25KHz /≥40dB @12.5KHz

All specifications may be modified without prior notice or liability.

Troubleshooting:
Problem Reason Solution
The battery doesn’t be installed Remove and re-install the battery.
correctly.
The battery runs out. Charging or change a new battery.
The radio doesn’t start.
The battery is poor contact causing Clearing the contact. Please get contact with
by damaged or dirty. our distributor to repair, if you cannot solve
it.
Battery voltage is low. Charging or change a new battery.
The voice is too small. Turn up the sound.
The sound is small/
The antenna is loose. Turn off the radio and re-install the antenna.
intermittent, or on sound
The speaker is damaged or dirty. Clear the speaker. Please get contact with
when receiving the signal.
our distributor to repair, if you cannot solve
it.
The frequency is different with Resetting the same frequency with them.
Cannot talk with the other members.
members in the same In the different digital or analog Correct to the same channel.
group channels
Too far away from each other Get close with each other
Single call or group call Be different in the Setting the same frequency/channel/color
does not work in the frequency/channel/color code/ code/ time slot
digital channel time slot
Other sound in the Interference from the same Change to new frequency, or correct the
channel, which is not frequency squelch
from the members The signal is not set yet. Set the signal for all radio in the group
Be too away from other members. Get close with other members.
Poor location, such as blocked by Move to open environment, restart the
tall buildings, or located in the radio.
The loud noise
basement
Interfere by the environment or Avoid the device interfering the radio
electromagnetic
 As above method still cannot solve your problem, or you meet other problem, please get contact with
local distributor to get the technological support.

 Maintenance and clean

To keep the performance and extend the service life, please note the content below for maintain the clear the
radio.
 Maintenance
◆Do not store the radio in an environment containing a corrosive electronic circuit material.
◆Do not directly lift an antenna or an external microphone in the course of carrying or using a radio.
◆Cover the appendage interface cover, when attachments are not used.
 Clean
◆Please use clean, dry cloth or brush to wipe off the surface of the walkie talkie and the dust attached to the
charging pole on a regular basis.
◆Wipe the radio on dirt with dust, lint free cloth, to prevent poor contact.
◆After long term use of radio, walkie talkie buttons, control knobs and chassis are easy to dirty. You can use
neutral detergent (do not use strong corrosive chemicals) and wet cloth to clean. After cleaning, make sure the
radio is completely dry; otherwise please do not use it.
◆When the walkie talkie does not in use, please attach the cover on the socket.

Please turn off the radio and remove the battery before clearing.
 Disclaimer
The accuracy and completeness of the contents are sought in the process of compilation, but we do not bear any
responsibility for the possible errors or omissions. With the continuous development of technology, we reserve
the right to change the design and specification of the product without notice. No copy, modification, translation
and dissemination of this handbook may be made in any form without the prior written authorization of our
department.
The third party products and contents involved in this manual belong to the third party. Our company does not
guarantee its accuracy, effectiveness, timeliness, legality or integrity. If you need more information or have any
suggestions for this manual, welcome to our website: http://www.volthink.com, or call our service hotline 400-
0123-353.