Scribd
Upload
890 views1 page

SWOOD Design Manual1

The document discusses linking dimensions from a newly added feature to custom properties in the file. This will make the properties available to edit using the SWOOD Design Edit panel tool. There may already be some existing properties from previous operations. The user is instructed to add the bottom four properties and link them to relevant sketch dimensions from extrude cut features created in previous steps. A tip suggests selecting the front annotations in the feature tree to easily select all dimensions.

Uploaded by

sanil kumar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
890 views1 page

SWOOD Design Manual1

The document discusses linking dimensions from a newly added feature to custom properties in the file. This will make the properties available to edit using the SWOOD Design Edit panel tool. There may already be some existing properties from previous operations. The user is instructed to add the bottom four properties and link them to relevant sketch dimensions from extrude cut features created in previous steps. A tip suggests selecting the front annotations in the feature tree to easily select all dimensions.

Uploaded by

sanil kumar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

SWOOD Design

11. The next step is to link the dimensions from the feature we’ve just
added with properties in the file. The properties will then be available
for us to edit when we use the SWOOD Design Edit panel tool.
Open the custom properties dialogue box.
12. There may already be some properties which will have been added
as a result of applying other information such as laminates and stock
offsets in the original edit panel operation.
Add the bottom four properties and link them to the relevant sketch
dimensions in the extrude cut features created the previous steps.
Tip: Using the annotation folder in the feature tree, select the front
annotations. This will show up all the dimensions for easy selection.
 

30-31 / 208

SWOOD Design

11. The next step is to link the dimensions from the feature we’ve just
added with properties in the file. The properties will then be available
for us to edit when we use the SWOOD Design Edit panel tool.
Open the custom properties dialogue box.
12. There may already be some properties which will have been added
as a result of applying other information such as laminates and stock
offsets in the original edit panel operation.
Add the bottom four properties and link them to the relevant sketch
dimensions in the extrude cut features created the previous steps.
Tip: Using the annotation folder in the feature tree, select the front
annotations. This will show up all the dimensions for easy selection.
 

You might also like