50B-4KG1- Globe 2050B-4KG1- Angle Fire Protection Pressure Relief Valve (4) USTED LISTED APPROVED 20508-4KG1 (Angle) ULL. Lister EM. Approved. Lister Sizes 3" thru ‘Sizes 3" thru 8" es 2” thru 10” Type Approved MODEL — CLA-VAL + UL Listed / ULC Listed + Factory Mutual Approved + Fast Opening to Maintain Steady Line Pressure + Accommodates Wide Range of Flow Rates + Closes Gradually for Surge-Free Operation + Adjustable Pressure Settings, Not Affected by Pressure At Valve Discharge ‘The Cla-Val Mode! 50B-4KG1 Globe / 2050B-2KG1 Angle Pressure Relief Valve is designed specifically to automati- cally relieve excess pressure in fire protection pumping sys- tems, Pilot controlled, it maintains constant system pres- ‘sure at the pump discharge within very close limits as demands change. The 508-4KG1 and 20508-4KGt can be supplied with optional internal and external epoxy coating of the main valve wetted surfaces. Typical Application KOMode! 20508-4kG1 Pressure Reliet Valve (Angle Pattern) ‘Check Vale wore 7 Protection System "Fluid Control at It's Best" 36 Operation Sequence ‘At pump start, Cla-Val Reliet Valve modulates to relieve ‘excess pump capacity, maintaining positive system pres- sure at the pump discharge. When fire demand slows or ceases, Cla-Val Model 50B-4KG1 opens, diverting entire pump output to dis: charge, allowing fire pump to be stopped without causing surging in the lines. (Please note that if the Model $08-4KGt Is to be used on a continuous duty basis to maintain fire-system pressure, suitable back pressure must be provided on the valve to prevent cavitation damage. Consult the factory for details.) Optional UL Listed Materials for Seawater and Severe ‘Service Applications: ‘Nickel Aluminum Bronze (NAB) - ASTM B148 Alloy C95800 + Monel - QQ-N.288 Comp B - ASTM A494 Grade M3OH + Cast Stee! - ASTM A216 Grade WCB. + 316 Stainless Stool - ASTM A743 Grades CF3M and CFMB + Supor Austenite Stainless Stoel - ASTM A351 Grade (CKSMCUN (SMO 254) + Super Duplex Staines (CESMN) ‘Stoo! -ASTM A890 Grade 5ASpecifications Sizes Globe:2"- 10" anges Angle: 2-10" Nanges 150 and 300 ANSIB16.42 Cass 150 - 250 psi Max. Cass 300 - 300 psi Max Water, to 180°F Max, Main Valve Body & Cover Ductile ron ASTM AS36 Grade 65-45-12 ‘Standard Main Valve Trim: Bronze Seat Tetlon Coated Stainless Stool Stom, Dura-Kleon Stem ‘Standard Pilot Control System: Cast Bronze with Stainless Stee vim End Details Pressure Ratings Standard Materials Available in the following reliet pressure ranges: 120-200 psi (150 Class) 100-300 psi (300 Class) Protective epony resin coating of wetted surfaces of main valve cast ron components (ULiisted HNFX Ex2a55) Adjustment Range Optional Purchase Specifications ‘The Fire Pump Pressure Relie! Valve shall modulate to relieve excess pressure ina fie protection system. It shall mainain constant pressure In the system regardless of demand changes. It shall be pit controled ‘and back pressure shall not afec its set point. I shall be actuated by line pressure through a pilot control system and open fast in order to maintain steady system pressure as system demand decreases. It shall close gradually to control surges and shall e-seat drip-tight within 5% of lis pressure setting. The main valve shall be of the hydraulieall-oper 4, ploteoniroied, diaphragm‘ype, globe or angle vale. It shall have 4 Single, removable, telon-coated sea, @ groaved stem guided at coth fends, and a resilient cise wih a rectangular crass section, being con- tained on 312 sides. No extemal packing glands shall be permitted and the diaphragm shall not be used as a seating surface. The pilot contra shall be a divect-acting, agjustable, spring-loaded, iaphragm-type valve ‘designed for modulating service to permit low when controling pressure fexceeds spring setting, Ths valve shall be UL Listed and Factory Mutual approved. It shall be the Mode! S0B-4KGI (globe) or Model 20508- 44KG1 (angle) Pressure Rell! Valve as manulactured by Cl-Val Newport Beach, Calfornia, *Special Not Te Model 50B-4KG1 Prassure Rell! Valve is availabe with 2004 ANS! Inlet lange and 150# ANSI outlet flange. This vali is used on higher pressure systems where 300# flange connections are required, and allows for adapting of @ discharge cone (generally supplied with 150% flange) to accommodate "atmospheric break’ at relet valve discharge. This ele! vatve, with 200# / 1504 flanges is available on spacial order, and Is UNDERWRITERS LABORATORIES LISTED AND FACTORY MUTUAL APPROVED. Specifications: Sizes Seawater Service Option Giobo: 2" - 8° flanged ‘Angie: 2" 8° langea Consult factory fr flange ratings. See page 1 for seawater service materials options. Dimensions UL, EM. and ULC sizes We recommend proving adequate space around valve for menance wor. Tanta Threaded Ends [a] Teo [7250 == == A160 Ranged [8 | Teo [200 | 60 | 2000 | am | 27H acoTangee [ooo] riae [Tas [Teen [ron | eae [a2 300x150 Teae [sat [oe | a5 [ace = sar [400 fase 575 | ras somo [ra = Teno] taas [reso [Taco | at | eat | Tao > 730 [ +00 [ene [are [ast | sa [ oa Threaded fae [are [sa eas © Wao Fingea [a7 | sa [ woo 70 [Toon | Tere | Tae 200Femmed | 0 | san [ 0a [ 70a | tomo | Taas [1558 Tiresded eas [325 [400 as Fis0Ringee [aos | ano [ao | Soo | woo | aoa | ome aooFarsee [350] ant [aaa [ sat [aso [aso [eat Tan soo eee [76 | ras [ose [ors [rae Wehesie= [| = [oe [ae [i Tivwaded Eas [a0 are [8 | see aoe ‘reo Ranged —[ ose [ ore oom [ aat[ o aco Fingee [ost [oes [at [aero S005 = [er [aie | oe = wee [ree aa é gos [ait [rate | 330 a > eC tao Fgea | vet | 402 | tat [8 200 Fanged [27 ae [92 [0 ae THreeaed nae [a [roe [ore | F1s0Farwee a3 toe [02 [rer [182 oorargee—[-98[ too [am [rae [os [ore [-2o0 wan eee bier paw pare [ae 7 Valve Capacity Vaio Sizes in niches: [2 [ove SU] a eB] 1 NEPA 20 Maximum Reconmandea aru | 208 | 300 | S00 | 70002500) S000 [71000 CLA-VAL 1701 Placentia Avenue - Costa Mesa CA 92627 800-942-6926 - Fax: 949-548-5441- Web Site: cla-val.com « E-mail: [email protected] CLA-VAL E-SOB4KG2O508-KOL1 (R-o82017) a7