Scribd
Upload
67 views

Filtomac

Uploaded by

Luis Yldefonso
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF or read online on Scribd
67 views

Filtomac

Uploaded by

Luis Yldefonso
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF or read online on Scribd
You are on page 1/ 4
aSTaye)\ we vm VIG a rs) rr -amiad® The most efficient hydraulic filters that require no external power source. > For flow rates up to 400 m3/h > Fine filtration degrees: 500 - 80 micron P Large filter area: up to 6800 cm2 Ue erate AMIAD FILTRATION SYSTEMS LTD. OW THE FILTOMAT M100 FILTER SERIES WORK ‘The FILTOMAT M100 series are automatic hydraulic filters, with a self-cleaning mechanism powered by a water-driven turbine. This series of filters is designed to work with various screen types, with filtration degrees from 500 to 80 micron, and is available in 2" to 12" inlet/outlet diameters. These filters units are hydraulically driven; no extemal power source is required. This feature ‘enables operation at remote installation sites. Filtering process: ‘Water enters the filter and passes through a pre- screen which is designed to protect the cleaning mechanism from large debris. Particulate collects ‘on the main screen and forms a "filter cake". The filter cake causes a pressure differential between the inlet and outlet of the filter. Self-Cleaning process: The self-cleaning process begins when the pressure differential across the screen reaches a preset level of 0.5 bar. x subne ran Sanne —Z Ree Srat Cosco ~ The rinse controller signals an internal flush valve to open. This creates a strong flow of water out of the filter due to pressure in the filter system. The flow of water through nozzles creates a focused back-flushing which effectively removes particles from the screen surface. This water is directed through the suction scanner nozzles attached to a hollow suction scanner shaff, through a turbine, which creates a spiral movement of the suction scanner shaft, and out the exhaust valve. Pressure drop in the turbine chamber and drainage of a piston (in the Modular type units only) forces the suction scanner shaft to move outward. The suction scanner nozzles sweep across the main screen, The combined spin and outward movement ensures that the suction nozzles clean the entire main screen. ‘When the first outward cleaning stroke is completed, a second flushing cycle is triggered, pushing the suction scanner assembly inward t0 its original position. The combined flush cycle takes 10-15 seconds, depending on the operating pressure. Control device options The standard fiter is hydraulically driven and does not require an external source of power for ‘operation. An optional electronic controller can be added to enable the operation of multiple fers in parallel or to incorporate additional functions (valve control, output signals to a central control system, etc) 2 Paton Samer Main Sera Nozze Prescrein & Least) 0g Ooo Rein Aas) M100-750 M100-1500, M100-4500 M100-6800

You might also like