Scribd
Upload
455 views2 pages

Lotte Titanvene HD5401GA

Uploaded by

ifah
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
455 views2 pages

Lotte Titanvene HD5401GA

Uploaded by

ifah
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Product Data Sheet

PT. Lotte Chemical Titan Nusantara. (Formerly known as PT TITAN Petrokimia Nusantara)
Head Office : Setiabudi 2 Building Lt 3, Suite 306-307 Jl HR Rasuna Said Kav 62, Jakarta - 12920, Indonesia
Phone: +62 21 52907008 Fax: +62 21 52907281
Site Location : Jl. Raya Merak Km.116 Cilegon 42436, Banten Indonesia Phone +62 254 572 468 Fax : +62 254 571290
Email: [email protected] Website : www.lottechem.co.id

Titanvene™ HD5401GA
Blow Moulding Applications

Titanvene™ HD5401GA is a high density polyethylene Other applications :


of high molecular weight designed for extrusion - Non-pressure pipe and conduits.
applications and in particular for large blow moulding - Synthetic rattan
containers of good stress cracking resistance. - Water Tank (up to 2500 Litre)
Titanvene™ HD5401GA is characterised by easy
extrusion and processing, very low odour and fuming, Recommended Processing Conditions (1)
excellent environmental stress cracking resistance with Titanvene™ HD5401GA can be easily processed on
superior impact strength. normal polyethylene blow moulding machines at
temperatures in the range of 170ºC to 210ºC.
Applications
Titanvene™ HD5401GA is specialised for blow Food Contact Compliance
moulding items such as bottles/containers from 5 to Titanvene™ HD5401GA can be used in food contact
150 litres capacity for: applications. Please contact your nearest PT. Lotte
- Food products and households Chemical TITAN Nusantara representative for more
- Toiletries detail of food contact compliance statements for the
- Pharmaceuticals and personal products specific grade.
- Industrial chemicals or oils

General Properties Value (2) Unit Test Method


Melt Flow Rate (190ºC/2.16 kg) 0.1 g/10 min ISO 1133 Condition 4
Melt Flow Rate (190ºC/21.6 kg) 11 g/10 min ISO 1133 Condition 7
Nominal Density 0.953 g/cm3 ISO 1183 Method D
Vicat Softening Point 127 ºC ISO 306
Melting Point 131 ºC ISO 3146 Method C

Mechanical Properties (3) Value (2) Unit Test Method


Tensile Stress at Yield 26 MPa ISO/R 527 Type 2 Speed C
Elongation at Break 1300 % ISO/R 527 Type 2 Speed C
Charpy Impact Strength 16 kJ/m2 ISO 179 Type 1 Notch A
Flexural Modulus 1500 MPa ISO 178
Hardness (Shore D) 66 ISO 868 Type D
ESCR Condition B, F50 (4) 400 Hours ASTM D1693

(1) The optimum processing conditions can be different from one machine to the others, depend on the mould and part design.
(2) The values shown are typical values obtained by averaging a number of tests. Small divergences from the quoted figures may occur.
(3) Measured on compression molded plaques.
(4) Environment Stress Cracking Resistance 10% Igepal : CO-630

" World’s 1st Halal Certified Resins – preserve integrity, wholesomeness & hygiene "
We cannot anticipate all conditions under which this information and our products, or the products of other manufacturers in combination with our products, may be
used. We accept no responsibility for results obtained by the application of this information or the safety and suitability of our products, either alone or in combination
with other products. Users are advised to make their own tests to determine the safety and suitability of each such product or product combination for their own
purposes. Unless otherwise agreed in writing, we sell products without warranty, and buyers and users assume all responsibility and liability for loss or damage arising
from the handling and use of our products, whether used alone or in combination with other products.

DEV4-REC-1616-03 November 15
Product Data Sheet
PT. Lotte Chemical Titan Nusantara. (Formerly known as PT TITAN Petrokimia Nusantara)
Head Office : Setiabudi 2 Building Lt 3, Suite 306-307 Jl HR Rasuna Said Kav 62, Jakarta - 12920, Indonesia
Phone: +62 21 52907008 Fax: +62 21 52907281
Site Location : Jl. Raya Merak Km.116 Cilegon 42436, Banten Indonesia Phone +62 254 572 468 Fax : +62 254 571290
Email: [email protected] Website : www.lottechem.co.id

" World’s 1st Halal Certified Resins – preserve integrity, wholesomeness & hygiene "
We cannot anticipate all conditions under which this information and our products, or the products of other manufacturers in combination with our products, may be
used. We accept no responsibility for results obtained by the application of this information or the safety and suitability of our products, either alone or in combination
with other products. Users are advised to make their own tests to determine the safety and suitability of each such product or product combination for their own
purposes. Unless otherwise agreed in writing, we sell products without warranty, and buyers and users assume all responsibility and liability for loss or damage arising
from the handling and use of our products, whether used alone or in combination with other products.

DEV4-REC-1616-03 November 15

You might also like