Scribd
Upload
457 views

Concrete Cube Test Recording Format (Interactive)

This document summarizes three concrete certification tests: 1) A slump test with a measured slump of [blank] taken on [date] at [time] and [place]. 2) Cube making for a sample taken on [date] at [time] and [place] with [number] cubes made of [size]. 3) Standard curing of the cubes in a moist air curing location for a [blank] period with maximum/minimum temperatures and moist/water recorded.

Uploaded by

Dawit Solomon
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
457 views

Concrete Cube Test Recording Format (Interactive)

This document summarizes three concrete certification tests: 1) A slump test with a measured slump of [blank] taken on [date] at [time] and [place]. 2) Cube making for a sample taken on [date] at [time] and [place] with [number] cubes made of [size]. 3) Standard curing of the cubes in a moist air curing location for a [blank] period with maximum/minimum temperatures and moist/water recorded.

Uploaded by

Dawit Solomon
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

CERTIFICATION OF SLUMP TEST

Testing carried out in accordance with: (please indicate)


☐ BS 1881 : Part 102 ☐ BS EN 12350 – 2

Essential Information

Date of test:
Sampling: Time: Place:
Sampling method: ☐ General - BS 1881: Part 101
Or alternative – ☐ BS 1881: Part 102, Clause 4.2
Sample identity number:
Sampling certificate available (copy attached): Yes No
Slump: Time of test: Place:
Time from sampling to beginning of test:
Form of slump: ☐ true ☐ shear ☐ collapse
Measured true slump:
Name of tester:

Additional Information

Name of project:
Part of works where concrete used:
Name of supplier:
Source of concrete:
Time of production or delivery to site:
Specification of concrete mix (e.g. strength class):

Affirmation that the test was made in accordance with BS 1881: Part 102 or BS EN 12350-2 as indicated above

Name and Signature of person responsible for test:


CERTIFICATION OF CUBE MAKING
Testing carried out in accordance with: (please indicate)
☐ BS 1881 : Part 108 ☐ BS EN 12390 – 2

Essential Information

Sample identity number:


Date and time of sampling:
Place of sampling:
Time of making the cubes:
Place where cubes were made:
Number of cubes made in the set:
Size of cubes:
Method of compaction (hand/vibration):
For hand tamping: number of strokes used:
For vibration: type of equipment and duration of vibration:
Identification number or codes of the cubes:
Age(s) at which cubes are to be tested:
Name of person making cubes:

Additional Information

Name of project:
Location of concrete represented by the cubes:
Name of supplier and source of the concrete:
Time of production:
Time of delivery to site:
Specification of the concrete:
Measured consistence:
Air content of concrete (if air-entrained):

Affirmation that the test was made in accordance with BS 1881: Part 108 or BS EN 12390-2 as indicated above

Name and Signature of person responsible for test:


CERTIFICATION OF STANDARD CURING OF TEST CUBES
Testing carried out in accordance with: (please indicate)
☐ BS 1881 : Part 111 ☐ BS EN 12390 – 2

Essential Information

Sample identity number:


Identification number or codes:
Location of moist air curing:
Method of moist air curing:
Period of moist air curing:
Maximum and minimum moist:
Maximum and minimum water:
Number of the cubes:

Additional Information

Time of adding water to the concrete:


Time of making the specimens:
Time of immersion of specimens in curing tank:
Time of removal of specimens from curing tank:
Temperature record during moist air curing:
Temperature record during water curing:
Age(s) at which cubes are to be tested:

Affirmation that the test was made in accordance with BS 1881: Part 111 or BS EN 12390-2 as indicated above

Name and Signature of person responsible for test:

You might also like