SE Series 2400

SB-321M

Separators
…Only from Eriez.

Electromagnetic Chute and Suspended

Automatically remove
damaging tramp iron
from the entire width
F or many years Eriez has provided
oil–cooled electromagnets for heavy duty
of materials conveyed
tramp iron separation applications. The
in heavy burden depths
parabolic shape of the field produced
on flat conveyors
by these magnets makes them ideal
or chutes.
for deep penetration of heavy burden
depths conveyed on troughed belts or
concentrated in a narrow flow.
To meet the special needs of sugar cane
processors and others who convey large
volumes of material on wide, flat belts
or chutes, Eriez developed the SE2400.
This electromagnetic separator has an
essentially flat field that spreads deeply
and evenly across its width. Drop–off at
the edges is considerably less than it is ®

in standard electromagnets. Protection

against damaging tramp iron can
be extended right to the edge of the
conveyor without the need to purchase a
grossly over–sized magnet.
Double–gap three–pole construction,
proved in hundreds of successful
standard magnet installations throughout
the world is combined with a center pole
and rectangular core to give the SE2400 its
unique capability. The powerful magnetic
field reaches out and attracts tramp iron up
to 24 inches (610 mm) away from
the magnet face.

®
 ®

CHOOSE FROM TWO SUSPENDED MAGNET

STYLES
To meet all operating conditions, the
wide–field magnet is available in two
styles: suspended or chute–type.
The suspended types can be equipped
with turnbuckle suspension gear for
ease of installation and adjustment to
the most efficient operating height over
wide flat belts or flat feeders. Support
legs are provided on the chute–type
magnets for installation in the underside ®

of chutes, and a special step on the

magnet faceplate is used to maintain
unrestricted material flow and prevent
accumulated tramp iron from being
forced off.
Both styles are available in standard
magnet widths of 60, 72, 78, 84, 96 and The supporting structure to hold suspended magnets over conveyor belts or feeders
108 inches (1524, 1824, 1981, 2134, can be either stationary or a trolley type so the magnet can be moved away from the
2438 and 2743 mm). Magnet design processing line to discharge its accumulation of tramp iron. Magnets like this one
and basic construction are identical for prevent costly machinery damage, shut–downs and loss of product by removing
both styles in any given size. large amounts of tramp iron each season in sugar mill processing operations.

ERIEZ DESIGN FEATURES

• Oil cooling of coils spaced for
maximum coolant circulation CHUTE MAGNET
provides increased efficiency,
better heat transfer.
• Aluminum coils are 30% lighter in
weight than comparable copper–coil
magnets, simplifying design of
supporting structure and suspension
gear, plus reducing shipping costs.
• An oil expansion chamber with
pressure relief valve, eliminating
the problem of moisture entering
the coil cavity.
• Eriez Electromagnets operate on
direct current only. When DC is not
available, silicon diode–type solid
state rectifiers can be supplied.
• Both styles of the SE2400 separator
are furnished ready for installation
and electrical hook–up to a 230V DC
A stainless steel wearplate covers the face of the Eriez Chute–type magnet. Tramp
power source.
iron collects in the recess below the step so material flow is unimpeded. Installed
in chutes inclined up to 60°, these powerful magnets protect valuable machinery by
trapping and holding nuts, bolts, knife blades, cutting teeth and other ferrous trash
present in fast–moving, entangled sugar cane stalks.

2 ©2011 ERIEZ MAGNETICS ALL RIGHTS RESERVED

 ®

TYPICAL INSTALLATION SPECIFICATIONS

SUSPENDED MAGNET SUSPENDED MAGNET

INCHES 50
MILLIMETERS 1270.0

29-5/8
EXPANSION 752.5
TANK
(CLOSED
POSITION)
11
279.4

On suspended style magnets, our OUTLET

optional turnbuckle suspension BOX
32
system will provide an easy method of
812.8
adjusting the magnet height above the
burden to achieve maximum tramp iron
recovery. For optimum results, speed of
the material being conveyed in this type
of installation should not exceed 350
12 64 OIL DRAIN
fpm (110 mpm). 304.8 1625.6

STAINLESS STEEL
BOTTOM PLATE *OPTIONAL TURNBUCKLES SHOWN

CHUTE MAGNET

MAGNET TURNBUCKLES
WIDTH (BETWEEN WATTS WEIGHT
CENTERLINES)

in mm in mm lb kg

60 1,524 45 1,143 9,600 12,925 5,863

72 1,829 57 1,448 11,000 15,100 6,849

78 1,981 63 1,600 11,750 16,200 7,348

The standard chute–type separator is 84 2,134 69 1,753 12,500 17,775 8,063
equipped with support legs designed
for installation in a 50° chute as shown, 96 2,348 81 2,057 13,750 20,920 9,489
but can be easily modified for greater or 108 2,743 93 2,362 15,700 23,425 10,625
lesser slopes as required. Recommended
maximum and minimum slopes are
60° and 45°. An access door built into
the chutework below the magnet is
necessary for the periodic removal of
accumulated tramp iron. The cooling
oil fill and drain connections are readily
available with the magnet in position.

3
 SPECIFICATIONS
CHUTE MAGNET
OIL FILL
A
C

OIL LEVEL

MAGNET FLANGE WIDTH FLANGE LENGTH HEIGHT

WEIGHT
WIDTH A B C WATTS
in mm in mm in mm in mm lb kg
14 356 19 483 29 737 18 457 1,315 650 295
18 457 22-1/4 565 38 965 17 432 1,750 925 420
24 610 28-1/4 718 50 1,270 26-1/2 673 3,850 2,600 1,179
30 762 34-1/4 870 50 1,270 26-1/2 673 4,300 4,600 2,086
36 914 41-1/4 1,048 56 1,422 26-3/4 679 5,300 5,000 2,268
42 1,067 47-1/2 1,206 56-1/2 1,435 26-3/4 679 6,150 5,500 2,495
60 1,524 64 1,626 68 1,727 32 813 8,650 11,635 5,277
72 1,829 76 1,930 68 1,727 32 813 10,600 13,555 6,148
78 1,981 82 2,083 68 1,727 32 813 11,250 14,600 6,622
84 2,134 88 2,235 68 1,727 32 813 12,000 15,875 7,201
96 2,438 100 2,540 68 1,727 32 813 13,000 18,895 8,571
108 2,743 112 2,845 68 1,727 32 813 14,650 21,025 9,537

Dimensions and specifications are subject to change without notice.

Eriez and Eriez Magnetics are registered trademarks of Eriez Manufacturing Co, Erie, PA ©2011 Eriez Magnetics All Rights Reserved

World Authority in Advanced Technology for Magnetic, Vibratory and Inspection Applications
Headquarters: 2200 Asbury Road, Erie, PA 16506-1440 U.S.A.
Telephone: 814/835-6000 • 800/345-4946 • Fax: 814/838-4960 • International Fax: 814/833-3348
® Web Site: http://www.eriez.com e-mail: [email protected]
Manufacturing Facilities: AUSTRALIA • BRAZIL • CANADA • CHINA • INDIA • JAPAN • MEXICO • SOUTH AFRICA • UNITED KINGDOM • UNITED STATES

411-2.5M-AHA-AP ERIEZ MANUFACTURING CO ©2011 PRINTED IN USA