\documentclass[conference]{IEEEtran}

\IEEEoverridecommandlockouts
% The preceding line is only needed to identify funding in the
first footnote. If that is unneeded, please comment it out.
\usepackage{cite}
\usepackage{amsmath,amssymb,amsfonts}
\usepackage{algorithmic}
\usepackage{graphicx}
\usepackage{textcomp}
\usepackage{xcolor}
\def\BibTeX{{\rm B\kern-.05em{\sc i\kern-.025em b}\kern-.08em
T\kern-.1667em\lower.7ex\hbox{E}\kern-.125emX}}
\begin{document}

\title{Paper Title*\\
{\footnotesize \textsuperscript{*}Note: Sub-titles are not
captured in Xplore and
should not be used}
\thanks{Identify applicable funding agency here. If none,
delete this.}
}

\author{\IEEEauthorblockN{1\textsuperscript{st} Given Name

Surname}
\IEEEauthorblockA{\textit{dept. name of organization (of
Aff.)} \\
\textit{name of organization (of Aff.)}\\
City, Country \\
email address}
\and
\IEEEauthorblockN{2\textsuperscript{nd} Given Name Surname}
\IEEEauthorblockA{\textit{dept. name of organization (of
Aff.)} \\
\textit{name of organization (of Aff.)}\\
City, Country \\
email address}
\and
\IEEEauthorblockN{3\textsuperscript{rd} Given Name Surname}
\IEEEauthorblockA{\textit{dept. name of organization (of
Aff.)} \\
\textit{name of organization (of Aff.)}\\
City, Country \\
email address}
\and
\IEEEauthorblockN{4\textsuperscript{th} Given Name Surname}
\IEEEauthorblockA{\textit{dept. name of organization (of
Aff.)} \\
\textit{name of organization (of Aff.)}\\
City, Country \\
email address}
\and
\IEEEauthorblockN{5\textsuperscript{th} Given Name Surname}
\IEEEauthorblockA{\textit{dept. name of organization (of
Aff.)} \\
\textit{name of organization (of Aff.)}\\
City, Country \\
email address}
\and
\IEEEauthorblockN{6\textsuperscript{th} Given Name Surname}
\IEEEauthorblockA{\textit{dept. name of organization (of
Aff.)} \\
\textit{name of organization (of Aff.)}\\
City, Country \\
email address}
}

\maketitle

\begin{abstract}
This document is a model and instructions for \LaTeX.
This and the IEEEtran.cls file define the components of your
paper [title, text, heads, etc.]. *CRITICAL: Do Not Use
Symbols, Special Characters, Footnotes,
or Math in Paper Title or Abstract.
\end{abstract}

\begin{IEEEkeywords}
component, formatting, style, styling, insert
\end{IEEEkeywords}

\section{Introduction}
This document is a model and instructions for \LaTeX.
Please observe the conference page limits.

\section{Ease of Use}

\subsection{Maintaining the Integrity of the Specifications}

The IEEEtran class file is used to format your paper and style
the text. All margins,
column widths, line spaces, and text fonts are prescribed;
please do not
alter them. You may note peculiarities. For example, the head
margin
measures proportionately more than is customary. This
measurement
and others are deliberate, using specifications that
anticipate your paper
as one part of the entire proceedings, and not as an
independent document.
Please do not revise any of the current designations.
\section{Prepare Your Paper Before Styling}
Before you begin to format your paper, first write and save
the content as a
separate text file. Complete all content and organizational
editing before
formatting. Please note sections \ref{AA}--\ref{SCM} below for
more information on
proofreading, spelling and grammar.

Keep your text and graphic files separate until after the text
has been
formatted and styled. Do not number text heads---{\LaTeX} will
do that
for you.

\subsection{Abbreviations and Acronyms}\label{AA}

Define abbreviations and acronyms the first time they are used
in the text,
even after they have been defined in the abstract.
Abbreviations such as
IEEE, SI, MKS, CGS, ac, dc, and rms do not have to be defined.
Do not use
abbreviations in the title or heads unless they are
unavoidable.

\subsection{Units}
\begin{itemize}
\item Use either SI (MKS) or CGS as primary units. (SI units
are encouraged.) English units may be used as secondary units
(in parentheses). An exception would be the use of English
units as identifiers in trade, such as ``3.5-inch disk
drive''.
\item Avoid combining SI and CGS units, such as current in
amperes and magnetic field in oersteds. This often leads to
confusion because equations do not balance dimensionally. If
you must use mixed units, clearly state the units for each
quantity that you use in an equation.
\item Do not mix complete spellings and abbreviations of
units: ``Wb/m\textsuperscript{2}'' or ``webers per square
meter'', not ``webers/m\textsuperscript{2}''. Spell out units
when they appear in text: ``. . . a few henries'', not ``. . .
a few H''.
\item Use a zero before decimal points: ``0.25'', not ``.25''.
Use ``cm\textsuperscript{3}'', not ``cc''.)
\end{itemize}

\subsection{Equations}
Number equations consecutively. To make your
equations more compact, you may use the solidus (~/~), the exp
function, or
appropriate exponents. Italicize Roman symbols for quantities
and variables,
but not Greek symbols. Use a long dash rather than a hyphen
for a minus
sign. Punctuate equations with commas or periods when they are
part of a
sentence, as in:
\begin{equation}
a+b=\gamma\label{eq}
\end{equation}

Be sure that the

symbols in your equation have been defined before or
immediately following
the equation. Use ``\eqref{eq}'', not ``Eq.~\eqref{eq}'' or
``equation \eqref{eq}'', except at
the beginning of a sentence: ``Equation \eqref{eq} is . . .''

\subsection{\LaTeX-Specific Advice}

Please use ``soft'' (e.g., \verb|\eqref{Eq}|) cross references

instead
of ``hard'' references (e.g., \verb|(1)|). That will make it
possible
to combine sections, add equations, or change the order of
figures or
citations without having to go through the file line by line.

Please don't use the \verb|{eqnarray}| equation environment.

Use
\verb|{align}| or \verb|{IEEEeqnarray}| instead. The \verb|
{eqnarray}|
environment leaves unsightly spaces around relation symbols.

Please note that the \verb|{subequations}| environment in

{\LaTeX}
will increment the main equation counter even when there are
no
equation numbers displayed. If you forget that, you might
write an
article in which the equation numbers skip from (17) to (20),
causing
the copy editors to wonder if you've discovered a new method
of
counting.

{\BibTeX} does not work by magic. It doesn't get the

bibliographic
data from thin air but from .bib files. If you use {\BibTeX}
to produce a
bibliography you must send the .bib files.
{\LaTeX} can't read your mind. If you assign the same label to
a
subsubsection and a table, you might find that Table I has
been cross
referenced as Table IV-B3.

{\LaTeX} does not have precognitive abilities. If you put a

\verb|\label| command before the command that updates the
counter it's
supposed to be using, the label will pick up the last counter
to be
cross referenced instead. In particular, a \verb|\label|
command
should not go before the caption of a figure or a table.

Do not use \verb|\nonumber| inside the \verb|{array}|

environment. It
will not stop equation numbers inside \verb|{array}| (there
won't be
any anyway) and it might stop a wanted equation number in the
surrounding equation.

\subsection{Some Common Mistakes}\label{SCM}

\begin{itemize}
\item The word ``data'' is plural, not singular.
\item The subscript for the permeability of vacuum $\mu_{0}$,
and other common scientific constants, is zero with subscript
formatting, not a lowercase letter ``o''.
\item In American English, commas, semicolons, periods,
question and exclamation marks are located within quotation
marks only when a complete thought or name is cited, such as a
title or full quotation. When quotation marks are used,
instead of a bold or italic typeface, to highlight a word or
phrase, punctuation should appear outside of the quotation
marks. A parenthetical phrase or statement at the end of a
sentence is punctuated outside of the closing parenthesis
(like this). (A parenthetical sentence is punctuated within
the parentheses.)
\item A graph within a graph is an ``inset'', not an
``insert''. The word alternatively is preferred to the word
``alternately'' (unless you really mean something that
alternates).
\item Do not use the word ``essentially'' to mean
``approximately'' or ``effectively''.
\item In your paper title, if the words ``that uses'' can
accurately replace the word ``using'', capitalize the ``u'';
if not, keep using lower-cased.
\item Be aware of the different meanings of the homophones
``affect'' and ``effect'', ``complement'' and ``compliment'',
``discreet'' and ``discrete'', ``principal'' and
``principle''.
\item Do not confuse ``imply'' and ``infer''.
\item The prefix ``non'' is not a word; it should be joined to
the word it modifies, usually without a hyphen.
\item There is no period after the ``et'' in the Latin
abbreviation ``et al.''.
\item The abbreviation ``i.e.'' means ``that is'', and the
abbreviation ``e.g.'' means ``for example''.
\end{itemize}
An excellent style manual for science writers is \cite{b7}.

\subsection{Authors and Affiliations}

\textbf{The class file is designed for, but not limited to,
six authors.} A
minimum of one author is required for all conference articles.
Author names
should be listed starting from left to right and then moving
down to the
next line. This is the author sequence that will be used in
future citations
and by indexing services. Names should not be listed in
columns nor group by
affiliation. Please keep your affiliations as succinct as
possible (for
example, do not differentiate among departments of the same
organization).

\subsection{Identify the Headings}

Headings, or heads, are organizational devices that guide the
reader through
your paper. There are two types: component heads and text
heads.

Component heads identify the different components of your

paper and are not
topically subordinate to each other. Examples include
Acknowledgments and
References and, for these, the correct style to use is
``Heading 5''. Use
``figure caption'' for your Figure captions, and ``table
head'' for your
table title. Run-in heads, such as ``Abstract'', will require
you to apply a
style (in this case, italic) in addition to the style provided
by the drop
down menu to differentiate the head from the text.

Text heads organize the topics on a relational, hierarchical

basis. For
example, the paper title is the primary text head because all
subsequent
material relates and elaborates on this one topic. If there
are two or more
sub-topics, the next level head (uppercase Roman numerals)
should be used
and, conversely, if there are not at least two sub-topics,
then no subheads
should be introduced.

\subsection{Figures and Tables}

\paragraph{Positioning Figures and Tables} Place figures and
tables at the top and
bottom of columns. Avoid placing them in the middle of
columns. Large
figures and tables may span across both columns. Figure
captions should be
below the figures; table heads should appear above the tables.
Insert
figures and tables after they are cited in the text. Use the
abbreviation
``Fig.~\ref{fig}'', even at the beginning of a sentence.

\begin{table}[htbp]
\caption{Table Type Styles}
\begin{center}
\begin{tabular}{|c|c|c|c|}
\hline
\textbf{Table}&\multicolumn{3}{|c|}{\textbf{Table Column
Head}} \\
\cline{2-4}
\textbf{Head} & \textbf{\textit{Table column subhead}}&
\textbf{\textit{Subhead}}& \textbf{\textit{Subhead}} \\
\hline
copy& More table copy$^{\mathrm{a}}$& & \\
\hline
\multicolumn{4}{l}{$^{\mathrm{a}}$Sample of a Table footnote.}
\end{tabular}
\label{tab1}
\end{center}
\end{table}

\begin{figure}[htbp]
\centerline{\includegraphics{fig1.png}}
\caption{Example of a figure caption.}
\label{fig}
\end{figure}

Figure Labels: Use 8 point Times New Roman for Figure labels.
Use words
rather than symbols or abbreviations when writing Figure axis
labels to
avoid confusing the reader. As an example, write the quantity
``Magnetization'', or ``Magnetization, M'', not just ``M''. If
including
units in the label, present them within parentheses. Do not
label axes only
with units. In the example, write ``Magnetization (A/m)'' or
``Magnetization
\{A[m(1)]\}'', not just ``A/m''. Do not label axes with a
ratio of
quantities and units. For example, write ``Temperature (K)'',
not
``Temperature/K''.

\section*{Acknowledgment}

The preferred spelling of the word ``acknowledgment'' in

America is without
an ``e'' after the ``g''. Avoid the stilted expression ``one
of us (R. B.
G.) thanks $\ldots$''. Instead, try ``R. B. G.
thanks$\ldots$''. Put sponsor
acknowledgments in the unnumbered footnote on the first page.

\section*{References}

Please number citations consecutively within brackets

\cite{b1}. The
sentence punctuation follows the bracket \cite{b2}. Refer
simply to the reference
number, as in \cite{b3}---do not use ``Ref. \cite{b3}'' or
``reference \cite{b3}'' except at
the beginning of a sentence: ``Reference \cite{b3} was the
first $\ldots$''

Number footnotes separately in superscripts. Place the actual

footnote at
the bottom of the column in which it was cited. Do not put
footnotes in the
abstract or reference list. Use letters for table footnotes.

Unless there are six authors or more give all authors' names;
do not use
``et al.''. Papers that have not been published, even if they
have been
submitted for publication, should be cited as
``unpublished'' \cite{b4}. Papers
that have been accepted for publication should be cited as
``in press'' \cite{b5}.
Capitalize only the first word in a paper title, except for
proper nouns and
element symbols.

For papers published in translation journals, please give the

English
citation first, followed by the original foreign-language
citation \cite{b6}.

\begin{thebibliography}{00}
\bibitem{b1} G. Eason, B. Noble, and I. N. Sneddon, ``On
certain integrals of Lipschitz-Hankel type involving products
of Bessel functions,'' Phil. Trans. Roy. Soc. London, vol.
A247, pp. 529--551, April 1955.
\bibitem{b2} J. Clerk Maxwell, A Treatise on Electricity and
Magnetism, 3rd ed., vol. 2. Oxford: Clarendon, 1892, pp.68--
73.
\bibitem{b3} I. S. Jacobs and C. P. Bean, ``Fine particles,
thin films and exchange anisotropy,'' in Magnetism, vol. III,
G. T. Rado and H. Suhl, Eds. New York: Academic, 1963, pp.
271--350.
\bibitem{b4} K. Elissa, ``Title of paper if known,''
unpublished.
\bibitem{b5} R. Nicole, ``Title of paper with only first word
capitalized,'' J. Name Stand. Abbrev., in press.
\bibitem{b6} Y. Yorozu, M. Hirano, K. Oka, and Y. Tagawa,
``Electron spectroscopy studies on magneto-optical media and
plastic substrate interface,'' IEEE Transl. J. Magn. Japan,
vol. 2, pp. 740--741, August 1987 [Digests 9th Annual Conf.
Magnetics Japan, p. 301, 1982].
\bibitem{b7} M. Young, The Technical Writer's Handbook. Mill
Valley, CA: University Science, 1989.
\end{thebibliography}
\vspace{12pt}
\color{red}
IEEE conference templates contain guidance text for composing
and formatting conference papers. Please ensure that all
template text is removed from your conference paper prior to
submission to the conference. Failure to remove the template
text from your paper may result in your paper not being
published.

\end{document}