General Gear Pumps

and Gear Motors

Technical
Information
 General Gear Pumps and Gear Motors
Technical Information
Overview

This manual offers the Sauer-Danfoss customer summarized technical information on

all standard Sauer-Danfoss gear pumps and motors and the standard available flanges,
shafts, and ports. For detailed information on a particular product, please consult the
specific technical manual for that product.

Sauer-Danfoss gear pumps and motors are ideal for a wide range of applications for:
• small vehicles, such as aerial lifts, greens and fairway mowers and electric forklifts.
These needs are ideally served by the aluminum pumps in the SKP1NN and SKP2NN
ranges. These pumps feature integral valves and pressure balanced design for high
efficiency, and extruded aluminum bodies for high strength.
• medium and large off-highway vehicles, like tractors, backhoe loaders, dumpers,
and telescopic handlers, we offer the SNP2NN and SNP3NN.

Many combinations of the pumps mentioned are available as multiple units made to
fit any need. Sauer-Danfoss provides standard pumps for use in industrial applications,
including power packs. Advantages include small package size, quiet operations, and low
installed cost.

© 2009 Sauer-Danfoss. All rights reserved.

Sauer-Danfoss accepts no responsibility for possible errors in catalogs, brochures and other printed material.
Sauer-Danfoss reserves the right to alter its products without prior notice. This also applies to products already
ordered provided that such alterations can be made without affecting agreed specifications. All trademarks
in this material are properties of their respective owners. Sauer-Danfoss, the Sauer-Danfoss logotype, the
Sauer-Danfoss S-icon, PLUS+1™, what really matters is inside® and Know-How in Motion™ are trademarks of the
Sauer-Danfoss Group.

Front cover photos: F005012, F005024, F005105, F005026, F005071, F005019, F005033, F301335, F101362, F101898, F301331, F301338 and P005051..

2 520L0557 • Rev DB • Jul 2009

 General Gear Pumps and Gear Motors
Technical Information
Contents

General Information Range................................................................................................................................................................... 5

Benefits............................................................................................................................................................... 6
Aluminum gear pumps and motors......................................................................................................... 6
Cast-iron gear pumps and motors....................................................................................................... 6
Pump displacements..................................................................................................................................... 7
Motor displacements..................................................................................................................................... 8

Model Code Model code for single pumps and motors............................................................................................. 9

Group 0.5 Overview..........................................................................................................................................................12

Design...............................................................................................................................................................12
Features............................................................................................................................................................12
Technical data.................................................................................................................................................12
Dimensions • TFP0NN – 01FA....................................................................................................................13

Group 1 Overview..........................................................................................................................................................14
Design...............................................................................................................................................................14
Features............................................................................................................................................................14
Technical data for pumps...........................................................................................................................15
Technical data for motors . ........................................................................................................................16
Gear pump dimensions .............................................................................................................................17
SNP1NN – 01BA and 01DA...................................................................................................................17
SKP1NN – 02BB and 02FA.....................................................................................................................18
SNP1NN, SEP1NN – 03CA......................................................................................................................19
SKP1NN – 06GA and 06SA....................................................................................................................20
Gear motor dimensions..............................................................................................................................21
SKM1NN – 01BA.......................................................................................................................................21
SKM1NN, SKU1NN – 02BB and 02FA.................................................................................................22
SKM1NN – 06GA and 06SA...................................................................................................................23
Group 1 pump ports....................................................................................................................................24
Group 1 motor ports....................................................................................................................................25
Shaft and flange availability . ...................................................................................................................26

Group 2 Overview..........................................................................................................................................................27
Design...............................................................................................................................................................27
Features............................................................................................................................................................27
Technical data for pumps...........................................................................................................................28
Technical data for motors...........................................................................................................................29
Gear pump dimensions .............................................................................................................................30
SNP2NN – 01DA, 01FA and 01BA.......................................................................................................30
SNP2NN – 02DB and 02AA.................................................................................................................31
SNP2NN – 03CA........................................................................................................................................32
SNP2NN – 04/05DB and 04/05AA......................................................................................................33
SKP2NN – 06SB and SNP2NN – 06SA, 06GA .................................................................................34
SNP2NN – 06SA..BxBxYY../....................................................................................................................35
SNP2NN – 09BJ.........................................................................................................................................36
SNP2NN – A9BJ.........................................................................................................................................37

520L0557 • Rev DB • Jul 2009 3

 General Gear Pumps and Gear Motors
Technical Information
Contents

Group 2 Gear motor dimensions..............................................................................................................................38

SNM2NN – 01DA, 01FA and 01BA......................................................................................................38
SNM2NN – 02DB and 02AA . ...............................................................................................................39
SNM2NN – 03CA.......................................................................................................................................40
SNM2NN – 04/05DB and 04/05AA.....................................................................................................41
SNM2NN – 06GA and 06SA..................................................................................................................42
Group 2 pump ports....................................................................................................................................43
Group 2 motor ports....................................................................................................................................44
Shaft options...................................................................................................................................................45
Shaft and flange availability . ...................................................................................................................45
Shaft and flange availability and torque capability.....................................................................45

Group 3 Overview..........................................................................................................................................................46
Design...............................................................................................................................................................46
Features............................................................................................................................................................46
Technical data for pumps...........................................................................................................................47
Technical data for motors...........................................................................................................................48
Gear pump dimensions...............................................................................................................................49
SNP3NN – 01FA, 01DA, 01BA and SEP3NN – 01BA ....................................................................49
SNP3NN – 02FA, 02DA and 02BA.......................................................................................................50
SNP3NN – 03FB and 03BB.....................................................................................................................51
SNP3NN – 06DD and 06AA...................................................................................................................52
SNP3NN, SEP3NN – 07SA, 07GA.........................................................................................................53
Gear motor dimensions .............................................................................................................................54
SNM3NN – 01FA, 01DA and 01BA . ...................................................................................................54
SNM3NN – 02FA, 02DA and 02BA......................................................................................................55
SNM3NN – 03FB and 03BB...................................................................................................................56
SNM3NN – 06DD and 06AA.................................................................................................................57
SNM3NN – 07BC, 07SA and 07GA . ...................................................................................................58
Group 3 pump ports....................................................................................................................................59
Group 3 motor ports....................................................................................................................................60
Shaft and flange availability . ...................................................................................................................61
Shaft and flange availability and torque capability.....................................................................61

Multi-Stage Pumps Overview..........................................................................................................................................................62

Multi-stage pump model code................................................................................................................63
Multi-stage pumps with European standard front flange (01).....................................................66

4 520L0557 • Rev DB • Jul 2009

 General Gear Pumps and Gear Motors
Technical Information
General Information

Range Sauer-Danfoss offers a wide range of gear products to meet most application needs.
The catalogue highlights the range of aluminum and cast iron gear pumps and motors
available from Sauer-Danfoss. Detailed specifications are included for all products. Many
other configurations are available that are not included in this catalogue.
For further information, please contact your Sauer-Danfoss representative.

Aluminum gear pumps and motors

There are five families of aluminum pumps currently available: Group 0.5, 1, 2, 3 and
4, some can be combined to make multiple pumps. And there are three families of
aluminum motors: Group 1, 2 and 3.

Pumps and motors with extruded aluminum housing provide the necessary strength
construction while providing a very high power-to-weight ratio and increased heat
dissipation. At production test, the gear teeth cut their own track in the aluminum body
for maximum radial gear tip sealing and high volumetric efficiency.
Aluminum gear pumps and motors

F005 009

Cast-iron gear pumps and motors Cast-iron gear single and tandem pumps
D Series pumps and motors are of cast-
iron construction. Pumps and motors
feature a pressure-balanced design
for high volumetric and mechanical
efficiencies.

F101 356 F101 362

520L0557 • Rev DB • Jul 2009 5

 General Gear Pumps and Gear Motors
Technical Information
General Information

Benefits Sauer-Danfoss offers gear pumps and motors throughout a wide range of displacements.
Each has its own unique benefits that, briefly, include in part or total:
• Large displacement range (from 0.25 to 194.3 cm3/rev [0.015 to 11.86 in3/rev])
• High performance and cost effective
• Efficient pressure-balanced design
• Proven reliability and performance
• Optimum product configurations
• Full range of auxiliary features
• Compact, lightweight
• Modular product design
• Quiet operation
• Worldwide manufacture, sales and service

Sauer-Danfoss pumps and motors pressure-balanced design provides high efficiency

throughout a given range of displacements.

One-piece gear/shaft construction provides both high strength and an accurate

profile. Each integral gear/shaft is constructed of bearing-quality hardened-steel
that is machined to precise tolerances for minimum leakage. This one-piece design also
eliminates the potential problems of stress-fatigue often associated with two-piece
designs.

All Sauer-Danfoss gear pumps use hydrodynamic journal bearings that have an oil
film maintained between the gear/shaft and bearing surfaces at all times. If this oil
film is sufficiently sustained through proper system maintenance and operating within
recommended limits a long pump life can be expected.

6 520L0557 • Rev DB • Jul 2009

 General Gear Pumps and Gear Motors
Technical Information
General Information

Pump displacements
Quick reference chart for pump displacements vs. rated pressure

{
250
Rated pressure (bar)

200

150

100
TFP0NN SNP1NN
50 SKP1NN SNP2NN SNP3NN
SEP1NN SKP2NN SEP3NN
0
0 1 2 3 4 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95
Displacement (cm3/rev)

Motor displacements
Quick reference chart for motor displacements vs. rated pressure
300
Rated pressure (bar)

250

200

150
SKM1NN, SKU1NN/2,6÷7,8 sizes
SKU1NN/010, 012 size only
100
SNM2NN, SNU2NN, SKU2NN
SNM2NN/6,0 size only
50 SNM3NN, SNU3NN

0
0 1 2 3 4 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95
Displacement (cm3/rev)

520L0557 • Rev DB • Jul 2009 7

 General Gear Pumps and Gear Motors
Technical Information
Product Coding

Model code for single A B C D E F G H I J K L M N

pumps and motors /

A Type
TFP0NN, SNP1NN, SNP2NN, SNP3NN Standard gear pumps
SKP1NN, SKP2NN High torque gear pumps
Pumps

SEP1NN, SEP2NN, SEP3NN Medium pressure gear pumps

SNP1IN, SNP2IN Gear pumps with internal drain relief valve

SKM1NN, SNM2NN, SNM3NN Standard bi-directional gear motors

Motors

SKU1NN, SKU2NN High torque uni-directional gear motors

SNU1NN, SNU2NN, SNU3NN Uni-directional gear motors

B Displacement
Displacement
Frame size
cm3/rev [in3/rev]
Group 0.5 pump

,25 0.25 [0.015]

Legend:
,45 0.45 [0.027]
,57 0.57 [0.034]  Standard
,76 0.76 [0.045] ❍ Optional
1,3 1.30 [0.079] – Not Available

B Displacement (cont.)
SNP1NN

SNP2NN

SNP3NN
SKP1NN

SKP2NN
SEP1NN

SEP2NN

SEP3NN
SNP1IN

SNP2IN

Displacement Displacement Displacement

Frame

Frame

Frame
cm3/rev [in3/rev] cm3/rev [in3/rev] cm3/rev [in3/rev]
size

size

size

1,2 1.18 [0.072]     4,0 3.9 [0.24]     022 22.1 [1.35]  

Group 2 pumps

Group 3 pumps

1,7 1.57 [0.096]     6,0 6.0 [0.37]     026 26.2 [1.60]  

Group 1 pumps

2,2 2.09 [0.128]     8,0 8.4 [0.51]     033 33.1 [2.02]  

2,6 2.62 [0.160]     011 10.8 [0.66]     038 37.9 [2.32]  
3,2 3.14 [0.192]     014 14.4 [0.88]     044 44.1 [2.69]  
3,8 3.66 [0.223]     017 16.8 [1.02]     048 48.3 [2.93]  –
4,3 4.19 [0.256]     019 19.2 [1.17]     055 55.1 [3.36]  –
6,0 5.89 [0.359]     022 22.8 [1.39]     063 63.4 [3.87]  –
7,8 7.59 [0.463]     025 25.2 [1.54]     075 74.4 [4.54]  –
010 9.94 [0.607] – –  – 090 88.2 [5.38]  –
012 12.0 [0.732] – –  –
Frame size

Frame size

Frame size
SNM2NN

SNM3NN
SKM1NN

SNU1NN

SNU2NN

SNU3NN
SKU1NN

SKU2NN

Displacement Displacement Displacement

cm3/rev [in3/rev] cm3/rev [in3/rev] cm3/rev [in3/rev]
Group 1 motors

Group 2 motors

2,6 2.62 [0.160]    6,0 6.0 [0.37]  – – 022 22.1 [1.35]  

Group 3 motors

3,2 3.14 [0.192]    8,0 8.4 [0.51]    026 26.2 [1.60]  

3,8 3.66 [0.223]    011 10.8 [0.66]    033 33.1 [2.02]  
4,3 4.19 [0.256]    014 14.4 [0.88]    038 37.9 [2.32]  
6,0 5.89 [0.359]    017 16.8 [1.02]    044 44.1 [2.69]  
7,8 7.59 [0.463]    019 19.2 [1.17]    048 48.3 [2.93]  
010 9.94 [0.607]    022 22.8 [1.39]    055 55.1 [3.36]  
012 12.0 [0.732]    025 25.2 [1.54]    063 63.4 [3.87]  
075 74.4 [4.54]  
090 88.2 [5.38]  

8 520L0557 • Rev DB • Jul 2009

 General Gear Pumps and Gear Motors
Technical Information
Product Coding

Model code for single A B C D E F G H I J K L M N

pumps and motors /
(continued)

C Direction of rotation D Version *

R Right hand (clockwise) N Standard version of project
L Left hand (counterclockwise) * value representing a change to the initial project
B For reversible motors

E Mounting flange and gear shaft

SNM2NN

SNM3NN
SKM1NN

SNU1NN

SNU2NN

SNU3NN
SKU1NN
SNP1NN

SNP2NN

SNP3NN
SKP1NN

SKP2NN
TFP0NN

SEP1NN

SEP2NN

SEP3NN
SNP1IN

SNP2IN
Mounting Flange Gear Shaft Preferred Ports
Code
Type Type for Configuration

01FA European 2-bolt Parallel Metrical threaded  – – – – – – – – – – – – – – – – –

European 4-bolt Parallel European flanged – – – – – – – –  – –     –  
01BA European 4-bolt Tapered 1:8 European flanged –   –   –   –        
01DA European 4-bolt DIN Splined 9T European flanged – – – – – – – –  – –    – – – –
European 4-bolt DIN Splined 13T European flanged – – – – – – – – – – – – – –  –  
European 4-bolt Splined 15T European flanged –  – –  – – –  – –     –  
02AA German 4-bolt PTO Tapered 1:5 German flanged – – – – – – – –  – –    – – – –
02BA European 4-bolt Tapered 1:8 European flanged – – – – – – – – – – – – – –  – – –
02BB European 4-bolt Tapered 1:8 European flanged – –  – –  – – – – – – – – – – – –
02DA European 4-bolt DIN splined 13T European flanged – – – – – – – – – – – – – –  – – –
02DB German 4-bolt PTO DIN splined 9T German flanged – – – – – – – –  – –    – – – –
02FA European 4-bolt Parallel European flanged – –  – –   – – – – – – –  – – –
03BB European 4-bolt Tapered 1:8 European flanged – – – – – – – – – – – – – –  –  
03CA German 2-bolt PTO SD Tang Metrical threaded –  –   – – – – – – – – – – – – –
03CA 4-bolt for multiples SD Tang German flanged – – – – – – – –  – –    – – – –
03FB European 4-bolt Parallel European flanged – – – – – – – – – – – – – –  –  –
04AA German 2-bolt PTO Tapered 1:5 German flanged – – – – – – – –  – –    – – – –
04DB German 2-bolt PTO DIN splined German flanged – – – – – – – –  – –    – – – –
05AA German 2-bolt PTO Tapered 1:5 German flanged – – – – – – – –  – –    – – – –
05DB German 2-bolt PTO DIN splined German flanged – – – – – – – –  – –    – – – –
06AA German 4-bolt PTO Tapered 1:5 German flanged – – – – – – – – – – – – – –  –  
06GA SAE A-A Parallel SAE O-ring boss – –  – –   – – – – – – – – – – –
SAE A Parallel SAE O-ring boss – – – – – – – –  – –    – – – –
06SA SAE A-A SAE splined 9T SAE O-ring boss – –  – –  – – – – – – – – – – – –
SAE A SAE splined 9T SAE O-ring boss – – – – – – – –  – –    – – – –
06SB SAE A-A SAE splined 11T SAE O-ring boss – – – – – – – – –  – – – – – – – –
06DD German 4-bolt PTO DIN splined 15T German flanged – – – – – – – – – – – – – –  – – –
07BC SAE B flange Tapered 1:8 Vertical 4-bolt SAE flanged – – – – – – – – – – – – – – – –  
07GA SAE B flange Parallel Vertical 4-bolt SAE flanged – – – – – – – – – – – – – –  –  
07SA SAE B flange SAE splined 13T Vertical 4-bolt SAE flanged – – – – – – – – – – – – – –    
09BJ Perkins 4.236 timing case Tapered 1:8 European flanged – – – – – – – –  – – – – – – – – –
A9BJ Perkins 900 series Tapered 1:8 European flanged – – – – – – – –  – – – – – – – – –

For further details of design and size for: Legend:

• Group 1, see pages 24–25,  Standard
• Group 2, see pages 43–44 ❍ Optional
• Group 3, see pages 59–60. – Not Available

520L0557 • Rev DB • Jul 2009 9

 General Gear Pumps and Gear Motors
Technical Information
Product Coding

Model code for single A B C D E F G H I J K L M N

pumps and motors /
(continued)
F Rear cover
Pumps Motors
P1 Standard cover for pump P1 Standard cover for unidirectional motor
Gr. 0.5

R1 Standard cover for reversible pump M1 Stnd. cover for motor drain M12x1.5

Group 1
M2 Cover for motor drain 1⁄8 GAS
P1 Standard cover for pump
M3 Cover for motor drain ¼ GAS
Group 1

03 Cover for 03 flange

M6 Cover for motor drain 7⁄16–20UNF–2B
I1 Cover for pump with relief valve
MH Cover for motor drain M12x1,5 ISO6149
I3 Cover for 03 flange with relief valve
P1 Stnd. cover for unidirectional motor
P1 Standard cover for pump
L1 Cover for motor-side drain in vertical
P3 Cover for 03 flange only
axis ¼ Gas
C1 Front BSP ports: Inlet ¾ GAS;
L6 Cover for motor-side drain in vertical
Outlet ½ GAS
axis 9⁄16–18UNF–2B

Group 2
C6 Front SAE threaded ports:
M1 Stnd. cover for motor drain ¼ GAS
Inlet 11/₁₆ –12UN–2B;
driven side
Outlet ⁷/₈ –14UNF–2B
Group 2

M3 Cover for motor drain ¼ GAS + holes

E1 Cover per RV external drain 3⁄8 GAS
M5 (03 flange only)
E3 Cover per RV external drain
M6 Standard cover for motor drain
3⁄8 GAS, holes M5
9⁄16–18UNF–2B
E6 Cover per RV external drain
P1 Stnd. cover for unidirectional motor
Group 3

¾–16UNF–2B
M1 Standard cover for motor drain M14x1.5
I1 Cover per RV internal drain
M6 Cover for motor drain 9⁄16–18UNF–2B
I3 Cover per RV internal drain
for 03 flange only
P1 Standard cover for pump
Gr. 3

G Inlet port
H Outlet port
A2 18,5x22,23x47,63x ³/₈–16UNC D1 M10x1
A3 25x26,19x52,37x ³/₈–16UNC SAE flanged D3 M14x1,5
A4 31x30,18x58,72x 7/₁₆–14UNC port D4 M16x1,5
Threaded metric port
A5 37,5x35,7x69,85x ½–13UNC D5 M18x1,5
B1 8x30xM6 D7 M22x1,5
B2 13x30xM6 Flanged port D9 M26x1,5
B5 15x35xM6 4 threaded E3 9/₁₆–18UNF
holes
B6 15x40xM6 E4 ¾–16UNF
in X pattern,
B7 20x40xM6
in center or
E5 ⁷/₈–14UNF
Threaded SAE
BA 18x55xM8 off-set of E6 11/₁₆–12UN
O-ring boss port
BB 27x55xM8 body E8 15/₁₆–12UN
BC 36x55xM8 E9 15/₈–12UN
C1 8x26xM5 EA 1⁷/₈–12UN
C2 12x26xM5 Flanged port F2 ¼ GAS
C3 13,5x30xM6 4 threaded F3 ³/₈ GAS
holes in
C5 13,5x40xM8 F4 ½ GAS Threaded GAS (BSPP)
+ pattern
C7 20x40xM8 F5 ¾ GAS port
(European
C8 23,5x40xM8 standard F6 1 GAS
CA 27x51xM10 ports) F7 1¼ GAS
CD 36x62xM10

10 520L0557 • Rev DB • Jul 2009

 General Gear Pumps and Gear Motors
Technical Information
Product Coding

Model code for single A B C D E F G H I J K L M N

pumps and motors /
(continued)

I Port position and variant body

NN Std from catalogue
Port Bx-Bx for flange SAE off-set from center
YY
of body as per catalogue
ZZ Port type Bx-Bx in the center of the body

J Sealing
N Standard Buna seal
A Without shaft seal
B VITON seal

K Screws
N Standard screws
A Galvanized screws+nuts-washers
B DACROMET/GEOMET screws

L Set valve
NNN No valve
V** Integral RV-pressure setting. Pump/motor
speed for relief valve setting (min-1 [rpm]);
Group 1 and 2

M Marking
N Standard marking
A Standard marking + Customer Code
Z Without marking

N Mark position
N Standard marking position
A Mark on the bottom ref. to drive gear

520L0557 • Rev DB • Jul 2009 11

 General Gear Pumps and Gear Motors
Technical Information
Group 0.5

Overview TFP0NN pumps provide flexibility, TFP0NN 01FA

numerous displacements, features, and
shaft/port options. The TFP0NN series
has earned an excellent reputation for
rugged, dependable performance at
continuous pressures and speeds.
TFP0NN pumps are available in five
displacements from 0.25 to 1.27 cm3/rev F301 335

[0.015 to 0.075 in3/rev]. Complete

information can be found by referring
to the specific sections in this technical
manual.
TFP0NN 01FA (cut-away)
Design Constructed of high strength aluminum,
the TFP0NN rotation is either clockwise
or counterclockwise.

Features Special features of Group 0.5 pumps include: F005 037

• Wide range of displacements

• Parallel shaft ends
• Standard mounting flange (European, 2-bolt)
• European port options

Technical data Technical data – Group 0.5 gear pumps

Frame size
,25 ,45 ,57 ,76 1,3
cm3/rev 0.25 0.45 0.57 0.76 1.27
Displacement
[in3/rev] [0.015] [0.027] [0.034] [0.045] [0.075]
200 200 200 200 200
Peak pressure
[2900] [2900] [2900] [2900] [2900]
180 180 180 180 180
Rated pressure bar [psi]
[2600] [2600] [2600] [2600] [2600]
Minimum pressure at 103 103 103 103 103
maximum speed [1500] [1500] [1500] [1500] [1500]
Minimum speed at
500 500 500 500 500
103 bar [1500 psi] min-1 (rpm)
Maximum speed 8000 8000 8000 7000 5000
0.40 0.45 0.46 0.47 0.48
Weight kg [lb]
[0.88] [1.00] [1.01] [1.03] [1.06]
Moment of inertia of x 10-6 kg•m2 0.425 0.544 0.621 0.737 1.049
rotating components [x 10-6 lb•ft2] [10.09] [12.91] [14.74] [17.49] [24.89]
Theoretical flow at l/min 2.00 3.60 4.56 5.32 6.35
maximum speed [US gal/min] [0.53] [0.95] [1.20] [1.41] [1.68]

1 kg•m2 = 23.68 lb•ft2

For applications requiring parameters beyond those listed above, contact Sauer-Danfoss.

12 520L0557 • Rev DB • Jul 2009

 General Gear Pumps and Gear Motors
Technical Information
Group 0.5

Dimensions TFP0NN – 01FA mm

Available 01FA configuration only. [in]

B
49.5 [1.95]
11.5 [0.453]

7.5 [0.295]

25.5 [1.0]
A
TFP 50

66 [2.6]

80 [3.15]
Ø 6.5 [Dia 0.256]
M7 x 0.75 [0.0295]

Ø 7.9 [Dia 0.311]

A

Ø 22 [0.866] f 7
Inlet
Outlet
8 [0.315] 8 [0.315]

4 [0.157] 17 [0.669]
A-A
A 21 [0.827]
2 [0.0787] H8 4.3 [0.169]

Ø 7 [Dia 0.276] h6
P005 052E

TFP0NN dimensions
Frame size ,25 ,45 ,57 ,76 1,3
A 53.5 [2.10] 55.0 [2.16] 56.0 [2.20] 61.5 [2.42] 61.5 [2.42]
Dimension
B 26.5 [1.04] 27.3 [1.07] 27.8 [1.09] 30.5 [1.20] 30.5 [1.20]
Input/Output M10 x 1

Model code examples and maximum shaft torque

Flange/drive gear Model code example Maximum shaft torque
01FA TFP0NN/,57RN01FAP1D1D1NNNN/NNNNN 4.5 N•m [39.8 lb•in]

For further details on ordering, see Model Code, pages 8÷11.

520L0557 • Rev DB • Jul 2009 13

 General Gear Pumps and Gear Motors
Technical Information
Group 1

Overview Sauer-Danfoss group 1 gear pumps and motors use an external spur gear, and positive
displacement design of proven high pressure and efficiency. These high performance
pumps are robustly constructed. Their durability has been proven, with many years
experience, in hydraulic products for mobile and industrial applications.

Group 1 enjoy a pressure-balanced design that provides high efficiency for the entire
series. Series includes the SKP1NN, SEP1NN and SNP1NN pumps, and SKM1NN motor.

Group 1 gears representatives

F005 012 F005 021 F005 043

Design Group 1 is made up of high performance SNP1NN 01BA, SNP1IN 03CA (cut-away)
gear pumps and motors with fixed
displacements. They are available with a
variety of splined, parallel, and tapered
shaft ends (not all are available with
all flange styles); see the table on shaft
availability and interchangeability on the
next page. Various port configurations
are also available. The SKM1NN motor
can work in series.
F005 018

F005 039

Features Special features of Group 1 pumps and motor include:

• wide range of displacements (from 1.2 to 12 cm3/rev [0.072 to 0.732 in3/rev] for
pumps; from 2.6 to 12 cm3/rev [0.158 to 0.732 in3/rev] for motors)
• a variety of splined, parallel, and tapered shaft ends
• various standard mounting flanges
• European, DIN, O-ring boss, and BSPP (gas threaded) port options
• multiple pump configurations, in combination with SNP1NN, SKP1NN, SNP2NN,
SKP2NN and SNP3NN.

14 520L0557 • Rev DB • Jul 2009

 General Gear Pumps and Gear Motors
Technical Information
Group 1

Technical data for pumps

Technical data – Group 1 gear pumps

Frame size
1,2 1,7 2,2 2,6 3,2 3,8 4,3 6,0 7,8 010 012
cm3/rev 1.18 1.57 2.09 2.62 3.14 3.66 4.19 5.89 7.59 9.94 12.00
Displacement
[in3/rev] [0.072] [0.096] [0.128] [0.160] [0.192] [0.223] [0.256] [0.359] [0.463] [0.607] [0.732]
SNP1NN
270 270 270 270 270 270 270 210 170
Peak pressure
[3915] [3915] [3915] [3915] [3915] [3915] [3915] [3045] [2465]
bar [psi]
250 250 250 250 250 250 250 190 150
Rated pressure
[3625] [3625] [3625] [3625] [3625] [3625] [3625] [2760] [2175]
Minimum speed
800 800 600 600 600 600 500 500 500
at 0-150 bar
Min. speed at 150 min-1 (rpm)
1200 1200 1000 1000 1000 1000 800 800 800
bar to rated pressure
Maximum speed 4000 4000 4000 4000 4000 4000 3000 3000 3000
– –
SEP1NN
230 230 230 230 230 230 230 190 160
Peak pressure
[3335] [3335] [3335] [3335] [3335] [3335] [3335] [2760] [2320]
bar [psi]
210 210 210 210 210 210 210 170 140
Rated pressure
[3045] [3045] [3045] [3045] [3045] [3045] [3045] [2465] [2030]
Minimum speed
800 800 600 600 600 600 500 500 500
at 0-150 bar
Min. speed at 150 min-1 (rpm)
1200 1200 1000 1000 1000 1000 800 800 800
bar to rated pressure
Maximum speed 4000 4000 4000 4000 4000 4000 3000 3000 3000
SKP1NN*
270 270 270 270 270 270 270 250 220 170 140
Peak pressure
[3915] [3915] [3915] [3915] [3915] [3915] [3915] [3625] [3190] [2465] [2030]
bar [psi]
250 250 250 250 250 250 250 230 200 150 120
Rated pressure
[3625] [3625] [3625] [3625] [3625] [3625] [3625] [3335] [2900] [2175] [1740]
Minimum speed
800 800 800 800 800 800 600 600 600 600 600
at 0-150 bar
Min. speed at 150 min-1 (rpm) 1200 1200 1000 1000 1000 1000 1000 800 800 800 –
bar to rated pressure
Maximum speed 4000 4000 4000 4000 4000 4000 3000 3000 3000 2000 2000

All (SNP1NN, SEP1NN, SKP1NN)

1.02 1.05 1.09 1.11 1.14 1.18 1.20 1.30 1.39 1.55 1.65
Weight kg [lb]
[2.26] [2.31] [2.40] [2.45] [2.51] [2.60] [2.65] [2.87] [3.06] [3.42] [3.64]
Moment of inertia of x 10-6 kg•m2 3.2 3.7 4.4 5.1 5.7 6.4 7.1 9.3 11.4 14.6 17.1
rotating components [x 10-6 lb•ft2] [77] [89] [105] [120] [136] [152] [168] [220] [271] [347] [407]
Theoretical flow at l/min 4.72 6.28 8.36 10.48 12.56 14.64 12.57 17.67 22.77 19.88 24
maximum speed [US gal/min] [1.25] [1.66] [2.21] [2.77] [3.32] [3.87] [3.32] [4.67] [6.02] [5.25] [6.34]

1 kg•m2 = 23.68 lb•ft2 This table details Group 1 technical data for gear pumps based on the model and
displacement configuration. For further information, please see Sauer-Danfoss
publication Group 1 Gear Pumps Technical Information, 520L0545.
* SKP1NN is a special
version of the SNP1NN. It is C Caution
designed to accommodate The rated and peak pressure mentioned are for pumps with flanged ports only. When
an SAE 9T 20/40 DP tooth threaded ports are required a de-rated performance has to be considered. To verify
splined shaft for higher the compliance of an high pressure application with a threaded ports pump apply to
torque applications. a Sauer-Danfoss representative.

520L0557 • Rev DB • Jul 2009 15

 General Gear Pumps and Gear Motors
Technical Information
Group 1

Technical data for motors

Technical data – Group 1 gear motors

Frame size
2,6 3,2 3,8 4,3 6,0 7,8 010 012
cm3/rev 2.62 3.14 3.66 4.19 5.89 7.59 9.94 12
Displacement
[in3/rev] [0.158] [0.195] [0.231] [0.262] [0.366] [0.464] [0.607] [0.732]
SKM1NN (standard, bi-directional motor)
270 270 270 270 250 220 180 150
Peak pressure
[3915] [3915] [3915] [3915] [3625] [3190] [2610] [2175]
bar [psi]
250 250 250 250 230 200 160 130
Rated pressure
[3625] [3625] [3625] [3625] [3335] [2900] [2320] [1895]
Minimum speed 1000 1000 1000 800 800 800 800 800
min-1 (rpm)
Maximum speed 4000 4000 3000 3000 2000 2000 2000 2000
SKU1NN (standard, uni-directional motor)
270 270 270 270 250 220 170 140
Peak pressure
[3915] [3915] [3915] [3915] [3625] [3190] [2465] [2030]
bar [psi]
250 250 250 250 230 200 150 120
Rated pressure
[3625] [3625] [3625] [3625] [3335] [2900] [2175] [1740]
Minimum speed 1000 1000 1000 800 800 800 800 800
min-1 (rpm)
Maximum speed 4000 4000 3000 3000 2000 2000 2000 2000
Both (SKM1NN and SKU1NN)
1.02 1.14 1.18 1.2 1.3 1.39 1.55 1.65
Weight kg [lb]
[2.26] [2.51] [2.60] [2.65] [2.87] [3.06] [3.42] [3.64]
Moment of inertia of x 10-6 kg•m2 5.1 5.7 6.4 7.1 9.3 11.4 14.6 17.1
rotating components [x 10-6 lb•ft2] [121] [135.2] [151.9] [168.5] [220.7] [270.5] [339.4] [405.8]
1 kg•m2 = 23.68 lb•ft2
This table details Group 1 technical data for gear motors based on the model and
displacement configuration. For further information, please see Sauer-Danfoss
publication Group 1, 2 and 3 Gear Motors, Technical Information, 520L0568.

C Caution
The rated and peak pressure mentioned are for motors with flanged ports only. When
threaded ports are required a de-rated performance has to be considered. To verify
the compliance of an high pressure application with a threaded ports pump apply to
a Sauer-Danfoss representative.

16 520L0557 • Rev DB • Jul 2009

 General Gear Pumps and Gear Motors
Technical Information
Group 1

Gear pump dimensions SNP1NN – 01BA and 01DA mm

This drawing shows the standard porting for 01BA and 01DA. [in]
Available in Series SNP1NN only.

01BA 01DA

29 [1.14] B max
12.4 [0.488] A ±0.50 [0.020]
1:8
21.5 [0.846]
14.4 [0.583] 5.2 [0.205] Distance from front flange
Ø 25.4 -0.041 [1.0 -0.0016 ]
-0.0008

to cone reference diameter

(34.3 [1.35] max)

68 ±0.25 [2.68 ±0.010] 14 [0.551]
4.2 [0.165] 16.5 [0.65] body width
Pilot width 4.5 [0.177]

26.2 [1.03]
-0.020

Distance from
Ø 9.82 [0.387]

front flange
to shoulder
A

88.1 [3.47] max

74.5 [2.93] max

(71.9 [2.83]

45.7 [1.8]
Recommended

Ø 11.9 -0.110 [0.469-0.004 ]

M7-6g

A
Cone reference diameter

tightening
10.8 ±0.50 [0.425 ±0.020]

0
torque: 7-12 Nm X

C/c
(53.8 [2.12] max)

Ø 7.2 - 8 [0.283-0.315]

0
(min full thd 10 [0.394] deep) E/e 52.4 [2.06]

D/d ±0.20 [0.008] Spline:

69.4 [2.73] max
Z=15 M=0.75 alfa=30°
Circular tooth thickness:
1.028-1.068 [0.04 0-0.042]
A-A Internal spline dia:
Ø 0.75 [0.0295] X

0 0 9.8-10 [0.386-0.394]
2.41 -0.025 [0.0949 -0.0098 ]

5.5 +0.15 +0.0059

-0.25 [0.217 -0.0098 ]

P005 053E

SNP1NN – 01BA and 01DA dimensions

Frame size 1,2 1,7 2,2 2,6 3,2 3,8 4,3 6,0 7,8
37.75 38.5 39.5 40.5 41.5 42.5 43.5 46.75 50.0
A
[1.486] [1.516] [1.555] [1.634] [1.634] [1.673] [1.713] [1.841] [1.969]
Dimension
79.5 81.0 83.0 85.0 87.0 89.0 91.0 97.5 104.0
B
[3.130] [3.189] [3.268] [3.346] [3.425] [3.504] [3.583] [3.839] [4.094]
C/c 12 [0.472]
Inlet/
D/d 26 [1.024]
Outlet
E/e M5

Model code examples and maximum shaft torque

Flange/drive gear Model code example Maximum shaft torque
01BA SNP1NN/3,8RN01BAP1C2C2NNNN/NNNNN 25 N•m [221 lb•in]
01DA SNP1NN/6,0LN01DAP1C2C2NNNN/NNNNN 35 N•m [310 lb•in]

For further details on ordering, see Model Code, pages 8÷11.

520L0557 • Rev DB • Jul 2009 17

 General Gear Pumps and Gear Motors
Technical Information
Group 1

Gear pump dimensions SKP1NN – 02BB and 02FA mm

(continued) This drawing shows the standard porting for 02BB and 02FA. [in]
Available in Series SKP1NN only.

02BB 02FA
B max
35 [1.378]

8.0 [0.315] Distance from front flange

15.5 [0.610] to cone reference diameter Recommended
7.0 [0.276] tightening
Pilot width torque: 10-16 Nm

(32.1 [1.264] max)

Recommended 68.0 ±0.25
15.75 [0.620] 16.5 [0.650] 31.5 [1.240]
tightening [2.677 ±0.010]
torque: 10-16 Nm body width 8.3 [0.327]

24.5 [0.965]
1: 8 A ±0.50 [±0.02] Distance from front
X flange to shoulder 11.7 [0.461]

A
B
88.2 [3.472] max

74.5 [2.933] max

(73.0 [2.874])
(56.1 [2.209] max)

48.5 [1.909]

M10 x 1-6g
-0.018 [0.472 -0.001 ]
-0.041 [1.181 -0.0016 ]

A
Cone reference diameter
-0.0008

10.8 ±0.50[0.425 ±0.020]

M10x1-6g

12.0 +0.0 +0.0

Ø13.95 [0.549]

C/c
30.0 -0.020

D/d ±0.20 [±0.008]

[0.264-0.295]

56.0 [2.205]
Ø6.7-7.5

E/e (min full thd 10 mm

70.9 [2.791] max
[0.394] deep)
A-A B-B
0 +0.0 +0.0
0
3.0 -0.030 [0.118 -0.001] 3.0-0.030 [0.118 -0.001]
Ø 0.75 [0.0295] X

7.5 +0.25 +0.010

-0.15 [0.295 -0.006 ]
+0.05 +0.002
13.2 -0.20 [0.520 -0.008 ]

P005 054E

SKP1NN – 02BB and 02FA dimensions

Frame size 1,2 1,7 2,2 2,6 3,2 3,8 4,3 6,0 7,8 010 012
37.75 38.5 39.5 40.5 41.5 42.5 43.5 46.75 50.0 54.5 58.5
A
[1.486] [1.516] [1.555] [1.634] [1.634] [1.673] [1.713] [1.841] [1.969] [2.146] [2.303]
Dimension
79.5 81.0 83.0 85.0 87.0 89.0 91.0 97.5 104.0 113.0 121.0
B
[3.130] [3.189] [3.268] [3.346] [3.425] [3.504] [3.583] [3.839] [4.094] [4.449] [4.764]
C/c 12 [0.472]
Inlet/Outlet D/d 26 [1.024]
E/e M5

Model code examples and maximum shaft torque

Flange/drive gear Model code example Maximum shaft torque
02BB SKP1NN/6,0RN02BBP1C2C2NNNN/NNNNN 50 N•m [442 lb•in]
02FA SKP1NN/ 2,2LN02FAP1C2C2NNNN/NNNNN 24 N•m [212 lb•in]

For further details on ordering, see Model Code, pages 8÷11.

18 520L0557 • Rev DB • Jul 2009

 General Gear Pumps and Gear Motors
Technical Information
Group 1

Gear pump dimensions SNP1NN, SEP1NN – 03CA mm

(continued) This drawing shows the standard porting for 03CA. [in]

03CA
B ±1.0 [±0.039]
7.0 [0.276]
Pilot width
A ±0.50 8.5 [0.335] max
[±0.020]
+0.040
0.8 -0.30 63.0 ±0.25
+0.016 [2.48 ±0.01]
[0.031 -0.012]
4.8 ±0.10 body width
X OR 28.30 x 1.78

10.35 [0.407]
[0.189 ±0.004]
8.5 [0.335]

74.5 [2.933] max

40.0 [1.575]
22.0 [0.866]

22.75 [0.896] min

10.8 ±0.50 [0.425 ±0.020]

-0.003]
+0.001

29.65 [1.167]
32.0 -0.050 [1.260 -0.002]

5.0 -0.080 [0.197

-0.001

C/c 2.5 [0.098]

+0.020

2.0 [0.079]
-0.025

Ø8.5-9.0 [0.335-0.354]
Ø 0.4 [0.016] X

40.0 [1.575]
P005 055E

SNP1NN, SEP1NN – 03CA dimensions

Frame size 1,2 1,7 2,2 2,6 3,2 3,8 4,3 6,0 7,8
37.75 38.5 39.5 40.5 41.5 42.5 43.5 46.75 50
A
[1.486] [1.516] [1.555] [1.634] [1.634] [1.673] [1.713] [1.841] [1.969]
Dimension
70 71.5 73.5 75.5 77.5 79.5 81.5 88.0 94.5
B
[2.756] [2.815] [2.894] [2.972] [3.051] [3.130] [3.209] [3.465] [3.720]
Inlet C M18 x 1.5 THD 12 [0.472] deep
Outlet c M14 x 1.5, THD 12 [0.472] deep M18 x 1.5, THD 12 [0.472] deep

Model code examples and maximum shaft torque

Flange/drive gear Model code example Maximum shaft torque
SNP1NN/1,7RN03CA03D5D3NNNN/NNNNN
03CA 14 N•m [124 lb•in]
SEP1NN/2,2LN03CA03D5D3NNNN/NNNNN

For further details on ordering, see Model Code, pages 8÷11.

520L0557 • Rev DB • Jul 2009 19

 General Gear Pumps and Gear Motors
Technical Information
Group 1

Gear pump dimensions SKP1NN – 06GA and 06SA mm

(continued) This drawing shows the standard porting for 06GA and 06SA. [in]
Available in Series SKP1NN only.

06GA 06SA

27.0 [1.063] B max

7.9 [0.311] Distance from front
flange to shoulder 103.4 [4.071] max
27.0 [1.063]
6.0 [0.236] Distance from front
82.55 [3.258]
Pilot width flange to shoulder
19.1 [0.752] 7.9 [0.311]
A ±0.50 [0.020] R 32.1 [1.26] max
19.1 [0.752]
8.0 [0.315]
15.6 [0.614]
A
80.2 [3.157] max

74.5 [2.933] max

12.344 -0.127 [0.486 -0.05 ]

10.2-10.8 [.402-.425]
]

A
[0.500 -0.001

0
10.8 ±0.50 [0.425 ±0.020]

0
[2.0 -0.002
0
]

12.7 -0.025

0
68.0 ±0.25 [2.677 ±0.010]
50.8-0.050

C/c Straight thread body width

0

O-Ring boss
Splined:
Ø 0.75 [0.030] X
SAE J498-9T-20/40DP
A-A Flat root side fit
Circular tooth thickness:
13.94-14.20 [0.549-0.559] 0.127mm [0.005]
less than class 1 fit

0 0
3.2 -0.025 [0.126 -0.126 ] P005 056E

SKP1NN – 06GA and 06SA dimensions

Frame size 1,2 1,7 2,2 2,6 3,2 3,8 4,3 6,0 7,8 010 012
42.25 43 44 45.0 46.0 47 48 51.25 54.5 59 63.5
A
[1.663] [1.693] [1.732] [1.772] [1.811] [1.850] [1.890] [2.018] [2.146] [2.323] [2.50]
Dimension
84 85.5 87.5 89.5 91.5 93.5 95.5 102 108.5 117.5 125.5
B
[3.307] [3.366] [3.445] [3.524] [3.602] [3.681] [3.760] [4.016] [4.272] [4.626] [4.941]
Inlet C ¾–16UNF–2B, THD 14.3 [0.563] deep
Outlet c / –18UNF–2B, THD 12.7 [0.500] deep
9 16

Model code examples and maximum shaft torque

Flange/drive gear Model code example Maximum shaft torque
06GA SKP1NN/3,2RN06GAP1E4E3NNNN/NNNNN 32 N•m [283 lb•in]
06SA SKP1NN/012LN06SAP1E4E3NNNN/NNNNN 34 N•m [301 lb•in]

For further details on ordering, see Model Code, pages 8÷11.

20 520L0557 • Rev DB • Jul 2009

 General Gear Pumps and Gear Motors
Technical Information
Group 1

Gear motor dimensions SKM1NN – 01BA mm

This drawing shows the standard porting for 01BA. [in]
Available in Series SKM1NN only.

01BA

29 [1.14] B max
12.4 [0.488] A ±0.50 [0.020]
1:8
Ø 25.4 -0.041 [1.0 -0.0016 ]
-0.0008 14.4 [0.583] 5.2 [0.205] Distance from front flange
to cone reference diameter

(34.3 [1.35] max)

4.2 [0.165] 16.5 [0.65] 68 ±0.25 [2.68 ±0.010]

26.2 [1.03]
Pilot width body width
-0.020

Ø 9.82 [0.387]

[0.85 ±0.020]
21.6 ±0.50
A

88.1 [3.47] max

74.5 [2.93] max

(71.9 [2.83]

45.7 [1.8]
M7-6g

A
Cone reference diameter
10.8 ±0.50 [0.425 ±0.020]

C/c

(53.8 [2.12] max)

Ø 7.2 - 8 [0.283-0.315]
(min full thd 10 [0.394] deep) E/e 52.4 [2.06] M12x1.5-6H
Drain port
D/d ±0.20 [0.008]
69.4 [2.73] max
Recommended
tightening torque: 7-12 Nm

A-A

Ø 0.75 [0.0295] X
0 0
2.41 -0.025 [0.0949 -0.0098 ]

5.5 +0.15 +0.0059

-0.25 [0.217 -0.0098 ]

P005 057E

SKM1NN – 01BA dimensions

Frame size 2,6 3,2 3,8 4,3 6,0 7,8 010 012
40.5 41.5 42.5 43.5 46.75 50 54.5 58.5
A
[1.594] [1.634] [1.673] [1.713] [1.841] [1.969] [2.146] [2.303]
Dimension
85 87 89 91 97.5 104 113 121
B
[3.346] [3.425] [3.504] [3.583] [3.839] [4.094] [4.449] [4.764]
C/c 12 [0.472]
Inlet/Outlet D/d 26 [1.024]
E/e M5

Model code examples and maximum shaft torque

Flange/drive gear Model code example Maximum shaft torque
01BA SKM1NN/3,2BN01BAM1C2C2NNNN/NNNNN 25 N•m [221 lb•in]

For further details on ordering, see Model Code, pages 8÷11.

520L0557 • Rev DB • Jul 2009 21

 General Gear Pumps and Gear Motors
Technical Information
Group 1

Gear motor dimensions SKM1NN, SKU1NN – 02BB and 02FA mm

(continued) This drawing shows the standard porting for 02BB and 02FA. [in]

02BB 02FA
B max
35 [1.378]

8.0 [0.315] Distance from front flange

15.5 [0.610] to cone reference diameter
7.0 [0.276]
31.5 [1.240]
Pilot width
Recommended 15.75 [0.620] 16.5 [0.650] 8.3 [0.327] Distance from front
(32.1 [1.264] max)
tightening 68.0 ±0.25
flange to shoulder
torque: 10-16 Nm [23.677 ±0.010 ]
1: 8 A ±0.50 [±0.02] body width 11.7 [0.461]

24.5 [0.965]
X

M10 x 1-6g
A

B
88.2 [3.472] max

74.5 [2.933] max

(73.0 [2.874])
(56.1 [2.209] max)

48.5 [1.909]
Cone reference diameter
]

10.8 ±0.50[0.425 ±0.020]

M10x1-6g

A
-0.0008
[1.181 -0.0016

[0.472 -0.001]
+0.0 +0.0
Recommended
tightening
Ø13.95 [0.549]

C/c torque: 10-16 Nm

-0.020
30.0 -0.041

12.0 -0.018
M12x1.5-6H
E/e (min full thd 10 [0.394] deep)
Drain port

D/d ±0.20 [±0.08] Ø 6.7-7.5

Ø 0.75 [0.0295] X
[0.264-0.295]
A-A B-B
0 0 56.0 [2.205] +0.0 +0.0
3.0-0.030 [0.118 -0.001]
3.0 -0.030 [0.118 -0.001]
70.9 [2.791] max

7.5 +0.25 +0.010

-0.15 [0.295 -0.006 ]
+0.05 +0.002
13.2 -0.20 [0.520 -0.008 ]
P005 058E

SKM1NN, SKU1NN – 02BB and 02FA dimensions

Frame size 2,6 3,2 3,8 4,3 6,0 7,8 010 012
40.5 41.5 42.5 43.5 46.75 50 54.5 58.5
A
[1.594] [1.634] [1.673] [1.713] [1.841] [1.969] [2.146] [2.303]
Dimension
85 87 89 91 97.5 104 113 121
B
[3.346] [3.425] [3.504] [3.583] [3.839] [4.094] [4.449] [4.764]
C/c 12 [0.472]
Inlet/Outlet D/d 26 [1.024]
E/e M5

Model code examples and maximum shaft torque

Flange/drive gear Model code example Maximum shaft torque
SKM1NN/010BN02BBM1C2C2NNNN/NNNNN
02BB 50 N•m [442 lb•in]
SKU1NN/6,0LN02BBM1C2C2NNNN/NNNNN
SKM1NN/6,0BN02FAM1C2C2NNNN/NNNNN
02FA 24 N•m [212 lb•in]
SKU1NN/6,0LN02FAM1C2C2NNNN/NNNNN

For further details on ordering, see Model Code, pages 8÷11.

22 520L0557 • Rev DB • Jul 2009

 General Gear Pumps and Gear Motors
Technical Information
Group 1

Gear motor dimensions SKM1NN – 06GA and 06SA mm

(continued) This drawing shows the standard porting for 06GA and 06SA. [in]
Available in Series SKM1NN only.

06GA 06SA
27.0 [1.063] B max
7.9 [0.311]
Distance from front flange to shoulder 103.4 [4.071] max
27.0 [1.063]
6.0 [0.236] Distance from front
19.1 82.55 [3.258]
Pilot width flange to shoulder
[0.752] 7.9 [0.311]
X A ±0.50 [0.020] R 32.1 [1.26] max
19.1 [0.752]
8.0 [0.315]
15.6 [0.614]
A
80.2 [3.157] max

74.5 [2.933] max

10.2-10.8 [.402-.425]

12.344 -0.127 [0.486 -0.05 ]

10.8 ±0.50 [0.425 ±0.020]

[0.500 -0.001 ]

0
]

0
[2.0 -0.002
0

12.7 -0.025

C/c Straight thread 7/16-20UNF-2B

50.8 -0.050

0
0

O-Ring boss Drain port

0

Ø 0.75 [0.030] X

68.0 ±0.25 [2.677 ±0.010]

A-A Splined:
body width SAE J498-9T-20/40DP
13.94-14.20
[0.549-0.559] Flat root side fit
Circular tooth thickness:
0.127 [0.005]
0 0 less than class 1 fit
3.2 -0.025 [0.126 -0.126 ]
P005 059E

SKM1NN – 06GA and 06SA dimensions

Frame size 2,6 3,2 3,8 4,3 6,0 7,8 010 012
45 46 47 48 51.25 54.5 59 63.5
A
[1.771] [1.811] [1.85] [1.889] [2.017] [2.145] [2.322] [2.5]
Dimension
89.5 91.5 93.5 95.5 102 108.5 117.5 125.5
B
[3.523] [3.602] [3.681] [3.759] [4.015] [4.271] [4.625] [4.94]
Inlet/Outlet C/c ¾–16UNF–2B, THD 14.3 [0.563] deep

Model code examples and maximum shaft torque

Flange/drive gear Model code example Maximum shaft torque
06GA SKM1NN/6,0BN06GAM6E4E4NNNN/NNNNN 32 N•m [283 lb•in]
06SA SKM1NN/012BN06SAM6E4E4NNNN/NNNNN 34 N•m [301 lb•in]

For further details on ordering, see Model Code, pages 8÷11.

520L0557 • Rev DB • Jul 2009 23

 General Gear Pumps and Gear Motors
Technical Information
Group 1

Group 1 pump ports

Available pump ports for Group 1

B C D E F

45o

i (4 holes min. full thd.

10 [0.394] deep)
c (4 holes min. full thd.
10 [0.394] deep)

a g d e f

b h

P005 049E

Dimensions of Group 1 pumps ports

Port type B C D E F
Port dimensions a b c g h i d e f
Inlet 13 [0.512] 30 [1.181] M6 12 [0.462] 26 [1.024] M5 M18x1.5 ¾–16UNF–2B ³⁄8 Gas (BSPP)
1,2
Outlet 8 [0.315] 30 [1.181] M6 12 [0.462] 26 [1.024] M5 M18x1.5 9⁄16–18UNF–2B ³⁄8 Gas (BSPP)
Inlet 13 [0.512] 30 [1.181] M6 12 [0.462] 26 [1.024] M5 M18x1.5 ¾–16UNF–2B ³⁄8 Gas (BSPP)
1,7
Outlet 8 [0.315] 30 [1.181] M6 12 [0.462] 26 [1.024] M5 M18x1.5 9⁄16–18UNF–2B ³⁄8 Gas (BSPP)
Inlet 13 [0.512] 30 [1.181] M6 12 [0.462] 26 [1.024] M5 M18x1.5 ¾–16UNF–2B ³⁄8 Gas (BSPP)
2,2
Outlet 8 [0.315] 30 [1.181] M6 12 [0.462] 26 [1.024] M5 M18x1.5 9⁄16–18UNF–2B ³⁄8 Gas (BSPP)
Inlet 13 [0.512] 30 [1.181] M6 12 [0.462] 26 [1.024] M5 M18x1.5 ¾–16UNF–2B ³⁄8 Gas (BSPP)
2,6
Outlet 8 [0.315] 30 [1.181] M6 12 [0.462] 26 [1.024] M5 M18x1.5 9⁄16–18UNF–2B ³⁄8 Gas (BSPP)
Inlet 13 [0.512] 30 [1.181] M6 12 [0.462] 26 [1.024] M5 M18x1.5 ¾–16UNF–2B ³⁄8 Gas (BSPP)
3,2
Outlet 8 [0.315] 30 [1.181] M6 12 [0.462] 26 [1.024] M5 M18x1.5 9⁄16–18UNF–2B ³⁄8 Gas (BSPP)
Frame size

Inlet 13 [0.512] 30 [1.181] M6 12 [0.462] 26 [1.024] M5 M18x1.5 ¾–16UNF–2B ³⁄8 Gas (BSPP)
3,8
Outlet 8 [0.315] 30 [1.181] M6 12 [0.462] 26 [1.024] M5 M18x1.5 9⁄16–18UNF–2B ³⁄8 Gas (BSPP)
Inlet 13 [0.512] 30 [1.181] M6 12 [0.462] 26 [1.024] M5 M18x1.5 ¾–16UNF–2B ³⁄8 Gas (BSPP)
4,3
Outlet 8 [0.315] 30 [1.181] M6 12 [0.462] 26 [1.024] M5 M18x1.5 9⁄16–18UNF–2B ³⁄8 Gas (BSPP)
Inlet 13 [0.512] 30 [1.181] M6 12 [0.462] 26 [1.024] M5 M18x1.5 ¾–16UNF–2B ³⁄8 Gas (BSPP)
6,0
Outlet 13 [0.512] 30 [1.181] M6 12 [0.462] 26 [1.024] M5 M18x1.5 9⁄16–18UNF–2B ³⁄8 Gas (BSPP)
Inlet 13 [0.512] 30 [1.181] M6 12 [0.462] 26 [1.024] M5 M18x1.5 ¾–16UNF–2B ³⁄8 Gas (BSPP)
7,8
Outlet 13 [0.512] 30 [1.181] M6 12 [0.462] 26 [1.024] M5 M18x1.5 9⁄16–18UNF–2B ³⁄8 Gas (BSPP)
Inlet 13 [0.512] 30 [1.181] M6 12 [0.462] 26 [1.024] M5 M18x1.5 ¾–16UNF–2B ³⁄8 Gas (BSPP)
010
Outlet 13 [0.512] 30 [1.181] M6 12 [0.462] 26 [1.024] M5 M18x1.5 9⁄16–18UNF–2B ³⁄8 Gas (BSPP)
Inlet 13 [0.512] 30 [1.181] M6 12 [0.462] 26 [1.024] M5 M18x1.5 ¾–16UNF–2B ³⁄8 Gas (BSPP)
012
Outlet 13 [0.512] 30 [1.181] M6 12 [0.462] 26 [1.024] M5 M18x1.5 9⁄16–18UNF–2B ³⁄8 Gas (BSPP)

24 520L0557 • Rev DB • Jul 2009

 General Gear Pumps and Gear Motors
Technical Information
Group 1

Group 1 motor ports

Available ports for bi-directional motor SKM1NN

B C D E F

45o

i (4 holes min. full thd.

10 [0.394] deep)
c (4 holes min. full thd.
10 [0.394] deep)

a g d e f

b h

P005 049E

SKM1NN bi-directional motor ports dimensions (all frame sizes)

Port type B C D E F
Port dimensions a b c g h i d e f
Inlet/Outlet 13 [0.512] 30 [1.181] M6 12 [0.472] 26 [1.024] M5 M18x1.5 ¾–16UNF–2B ³⁄8 Gas (BSPP)
Drain M12x1.5 M12x1.5 M12x1.5 7⁄16–20UNF–2B 1⁄8 Gas (BSPP)

SNU1NN, SKU1NN uni-directional motor ports dimensions

Port type B C D E F
Port dimensions a b c g h i d e f
Outlet 13 [0.512] 30 [1.181] M6 12 [0.472] 26 [1.024] M5 M18x1.5 ¾–16UNF–2B ³⁄8 Gas (BSPP)
2,6
Inlet 8 [0.315] 30 [1.181] M6 12 [0.472] 26 [1.024] M5 M14x1.5 9⁄16–18UNF–2B ³⁄8 Gas (BSPP)
Outlet 13 [0.512] 30 [1.181] M6 12 [0.472] 26 [1.024] M5 M18x1.5 ¾–16UNF–2B ³⁄8 Gas (BSPP)
3,2
Inlet 8 [0.315] 30 [1.181] M6 12 [0.472] 26 [1.024] M5 M14x1.5 9⁄16–18UNF–2B ³⁄8 Gas (BSPP)
Outlet 13 [0.512] 30 [1.181] M6 12 [0.472] 26 [1.024] M5 M18x1.5 ¾–16UNF–2B ³⁄8 Gas (BSPP)
3,8
Type (displacement)

Inlet 8 [0.315] 30 [1.181] M6 12 [0.472] 26 [1.024] M5 M14x1.5 9⁄16–18UNF–2B ³⁄8 Gas (BSPP)
Outlet 13 [0.512] 30 [1.181] M6 12 [0.472] 26 [1.024] M5 M18x1.5 ¾–16UNF–2B ³⁄8 Gas (BSPP)
4,3
Inlet 8 [0.315] 30 [1.181] M6 12 [0.472] 26 [1.024] M5 M14x1.5 9⁄16–18UNF–2B ³⁄8 Gas (BSPP)
Outlet 13 [0.512] 30 [1.181] M6 12 [0.472] 26 [1.024] M5 M18x1.5 ¾–16UNF–2B ³⁄8 Gas (BSPP)
6,0
Inlet 13 [0.512] 30 [1.181] M6 12 [0.472] 26 [1.024] M5 M18x1.5 9⁄16–18UNF–2B ³⁄8 Gas (BSPP)
Outlet 13 [0.512] 30 [1.181] M6 12 [0.472] 26 [1.024] M5 M18x1.5 ¾–16UNF–2B ³⁄8 Gas (BSPP)
7,8
Inlet 13 [0.512] 30 [1.181] M6 12 [0.472] 26 [1.024] M5 M18x1.5 9⁄16–18UNF–2B ³⁄8 Gas (BSPP)
Outlet 13 [0.512] 30 [1.181] M6 12 [0.472] 26 [1.024] M5 M18x1.5 ¾–16UNF–2B ³⁄8 Gas (BSPP)
010
Inlet 13 [0.512] 30 [1.181] M6 12 [0.472] 26 [1.024] M5 M18x1.5 9⁄16–18UNF–2B ³⁄8 Gas (BSPP)
Outlet 13 [0.512] 30 [1.181] M6 12 [0.472] 26 [1.024] M5 M18x1.5 ¾–16UNF–2B ³⁄8 Gas (BSPP)
012
Inlet 13 [0.512] 30 [1.181] M6 12 [0.472] 26 [1.024] M5 M18x1.5 9⁄16–18UNF–2B ³⁄8 Gas (BSPP)

520L0557 • Rev DB • Jul 2009 25

 General Gear Pumps and Gear Motors
Technical Information
Group 1

Shaft and flange This table details the standard Group 1 shafts and flange combinations that are currently
availability available with the maximum shaft torque limits. For further information, please see
Sauer-Danfoss publications Group 1 Gear Pumps Technical Information, 520L0545 and
Group 1, 2 and 3 Gear Motors, Technical Information, 520L0568.

Shaft and flange availability and torque capacity

Shaft Mounting flange code with maximum torque in N•m [lbf•in]
Description Code 01 02 03 06
Taper 1:8 BA 25 [221] – – –
Taper 1:8 BB – 50 [442] – –
Spline T-15, m=0.75, alfa=30o DA 35 [310] – – –
SAE spline J 498-9T-20/40DP SA – – – 34 [301]
Parallel 12 mm [0.47 in] FA – 24 [212] – –
Parallel 12.7 mm [0.5 in] GA – – – 32 [283]
Sauer-Danfoss Tang CA – – 14 [124] –

26 520L0557 • Rev DB • Jul 2009

 General Gear Pumps and Gear Motors
Technical Information
Group 2

Overview Sauer-Danfoss’ Group 2 family of gear pumps: SNP2NN, SKP2NN and motors: SNM2NN,
SNU2NN, SKU2NN are pressure balanced to provide high efficiency for the entire series.
The SNP2NN pump accommodates SAE 9-tooth and the SKP2NN pump accomodates
SAE 11-tooth splined shaft for higher torque applications. The SNM2NN (a bi-directional
motor) and the SNU2NN, SKU2NN (uni-directional motors) complete the family.

Group 2 gear pumps and motors

F005 017
F005 024 F005 026

F005 028
F301 331

Design The Group 2 family of gear pumps and motors have a full
range of mounting flanges meeting the standards of the
market. The robust shaft seal design has a built-in stiffener
and dust lip. The extruded aluminum alloy body is built
for high pressure, complete with flanged or threaded
ports that are compatible with market standards. Their
patented sealing system design with high pressures and
prevents leaks. SKP2NN are 11-tooth splined shaft gear
pumps. F005 030

Features
Special features within the Group 2 family include:
• wide range of displacement (from 4 to 25 cm3/rev [from 0.24 to 1.54 in3/rev] for pumps;
and from 6 to 25 cm3/rev [from 0.36 to 1.54 in3/rev] for motors)
• various splined, parallel, and tapered shaft ends
• many types of industry-standard and special engine mounting flanges
• assorted port configurations including European, DIN standard, BSPP, and O-ring boss
• numerous relief valve options, including full-flow, pilot, and others
• outrigger bearing assembly available for high radial and thrust load applications
• multiple configurations in combination with SNP1NN, SKP1NN, SKP2NN and
SNP3NN pumps.

520L0557 • Rev DB • Jul 2009 27

 General Gear Pumps and Gear Motors
Technical Information
Group 2

Technical data for pumps

Technical data – Group 2 gear pumps

Frame size
4,0 6,0 8,0 011 014 017 019 022 025
cm3/rev 3.9 6 8.4 10.8 14.4 16.8 19.2 22.8 25.2
Displacement
[in3/rev] [0.24] [0.37] [0.51] [0.66] [0.88] [1.02] [1.17] [1.39] [1.54]
SNP2NN
280 280 280 280 280 280 230 200 175
Peak pressure
[4060] [4060] [4060] [4060] [4060] [4060] [3335] [2900] [2638]
bar [psi]
250 250 250 250 250 250 210 180 160
Rated pressure
[3625] [3625] [3625] [3625] [3625] [3625] [3045] [2610] [2320]
Minimum speed
600 600 600 500 500 500 500 500 500
at 0-100 bar
Minimum speed
1200 1200 1000 800 750 750 700 700 700
at 100-180 bar min-1 (rpm)
Min. speed at 180 bar
1400 1400 1400 1200 1000 1000 1000 800 –
to rated pressure
Maximum speed 4000 4000 4000 4000 3500 3000 3000 3000 3000
SKP2NN
280 280 280 280 280 280 260 230 200
Peak pressure
[4060] [4060] [4060] [4060] [4060] [4060] [3770] [3335] [2900]
bar [psi]
250 250 250 250 250 250 240 210 190
Rated pressure
[3625] [3625] [3625] [3625] [3625] [3625] [3480] [3045] [2755]
Minimum speed
600 600 600 500 500 500 500 500 500
at 0-100 bar
Minimum speed
1200 1200 1000 800 750 750 700 700 700
at 100-180 bar min-1 (rpm)
Min. speed at 180 bar
1400 1400 1400 1200 1000 1000 1000 800 800
to rated pressure
Maximum speed 4000 4000 4000 4000 3500 3000 3000 3000 3000
Both (SNP2NN, SKP2NN)
2.3 2.4 2.5 2.7 2.9 3.0 3.1 3.2 3.3
Weight kg [lb]
[5.1] [5.3] [5.5] [5.8] [6.3] [6.5] [6.7] [7] [7.3]
Moment of inertia of x 10-6 kg•m2 21.3 26.5 32.4 38.4 47.3 53.3 59.2 68.1 74.1
rotating components [x 10-6 lb•ft2] [505] [629] [769] [911] [1122] [1265] [1405] [1616] [1758]
Theoretical flow l/min 15.6 24.0 33.6 43.2 50.4 50.4 57.6 68.4 75.6
at maximum speed [US gal/min] [4.1] [6.3] [8.9] [11.4] [13.3] [13.3] [15.2] [18] [20]

1 kg•m2 = 23.68 lb•ft2

This table details Group 2 technical data for gear pumps based on the model and
displacement configuration. For further information about application and configuration
of gear pumps, please see Sauer-Danfoss publication Group 2 Gear Pumps Technical
Information, 520L0560.

C Caution
The rated and peak pressure mentioned are for pumps with flanged ports only. When
threaded ports are required a de-rated performance has to be considered. To verify the
compliance of an high pressure application with a threaded ports pump apply to
a Sauer-Danfoss representative.

28 520L0557 • Rev DB • Jul 2009

 General Gear Pumps and Gear Motors
Technical Information
Group 2

Technical data for motors

Technical data – Group 2 gear motors

Frame size
6,0 8,0 011 014 017 019 022 025
cm3/rev 6 8.4 10.8 14.4 16.8 19.2 22.8 25.2
Displacement
[in3/rev] [0.36] [0.513] [0.659] [0.879] [1.025] [1.171] [1.391] [1.538]
SNM2NN (bi-directional motor)
280 280 280 280 260 230 200 180
Peak pressure
[4060] [4060] [4060] [4060] [3770] [3335] [2900] [2610]
250 250 250 250 230 210 180 160
Rated pressure bar [psi] [3625] [3625] [3625] [3625] [3335] [3000] [2610] [2320]
250 250 250 250 230 210 180 160
Outlet pressure
[3625] [3625] [3625] [3625] [3335] [3000] [2610] [2320]
Minimum speed 700 700 700 700 500 500 500 500
min-1 (rpm)
Maximum speed 4000 4000 4000 4000 4000 3500 3500 3500
SNU2NN (uni-directional motor)
280 280 280 260 230 200 180
Peak pressure
[4060] [4060] [4060] [3770] [3335] [2900] [2610]
bar [psi]
250 250 250 230 210 180 160
Rated pressure –
[3625] [3625] [3625] [3335] [3000] [2610] [2320]
Minimum speed 600 600 600 500 500 500 500
min-1 (rpm)
Maximum speed 3500 3500 3500 3000 3000 3000 2500
SKU2NN (uni-directional motor)
280 280 280 260 230 200 175
Peak pressure
[4060] [4060] [4060] [3770] [3335] [2900] [2815]
bar [psi]
250 250 250 230 210 180 160
Rated pressure –
[3625] [3625] [3625] [3335] [3000] [2610] [2320]
Minimum speed 600 600 600 500 500 500 500
min-1 (rpm)
Maximum speed 3500 3500 3500 3000 3000 3000 2500
All (SNM2NN, SNU2NN, SKU2NN)
2.4 2.5 2.7 2.9 3.0 3.1 3.2 3.3
Weight kg [lb]
[5.3] [5.5] [5.5] [6.3] [6.5] [6.7] [7] [7.3]
Moment of inertia of x 10-6 kg•m2 26.5 32.4 38.4 47.3 53.3 59.2 68.1 74.1
rotating components [x 10-6 lb•ft2] [629] [769] [911] [1122] [1265] [1405] [1616] [1758]
Theoretical flow at l/min 24 33.6 43.2 50.4 50.4 57.6 68.4 75.6
maximum speed [US gal/min] [6.3] [8.9] [11.4] [13.3] [13.3] [15.2] [180] [20]

1 kg•m2 = 23.68 lb•ft2

This table details the performance of the Group 2 gear motors. For further information
about application and configuration of gear motors, please see Sauer-Danfoss
publication Group 1, 2 and 3 Gear Motors, Technical Information, 520L0568.

C Caution
The rated and peak pressure mentioned are for motors with flanged ports only. When
threaded ports are required a de-rated performance has to be considered. To verify the
compliance of an high pressure application with a threaded ports pump apply to
a Sauer-Danfoss representative.

520L0557 • Rev DB • Jul 2009 29

 General Gear Pumps and Gear Motors
Technical Information
Group 2

Gear pump dimensions SNP2NN – 01DA, 01FA and 01BA mm

This drawing shows the standard porting for 01DA, 01FA and 01BA. [in]

01BA
01DA 01FA B max 40.5 [1.596]

19.5 [0.768] 36.5 [1.438] A ±0.50 [0.020] 17 [0.670]

(41.9 [1.651])
10 [0.394] 30 [1.182] 6.3 [0.248] 21.7 [0.854]
[0.591 -0.001
0
]

6.5 [0.256] 6.5 [0.256] 90 ±0.25[3.546 ±0.010] 18 [0.709] 5 [0.020]

-0.002 ]
Ø 17.46 [0.687]

-0.025
Ø 36.5 -0.050
-0.001
body width
Ø 15 -0.018

[1.438
0

B A
[1.277]
32.4

115.2 [4.539] max

(96.2 [3.790])

(73.3 [2.888])
[0.650 -0.004 ]

[2.514]

15.7 ±0.50 [0.619 ±0.020]

A
M6 thread 16 [.630] deep

63.8

M12x1.25-6g
0

C/c
X
Ø 16.5 -0.110
0

Ø 0.75 [0.030] X
9 [3.55] (min full thd 12 [0.472] deep) E/e 1 :8

71.5 D/d ±0.20 [0.008]

Spline:
[2.817]
B17x14 DIN 5482 B-B Nut and washer supplied with pump
Profile offset +0.6 [0.024] 90 [3.546] max Recommended tightening torque: 45-55 Nm
0 0
4 -0.030 [0.158-0.001]
A-A
0 0
4 [0.158 -0.001] 9.5 +0.15 +0.006
-0.25 [0.374 -0.010 ]
-0.030

+0.004
16.5 +0.10
-0.20 [0.650 -0.008 ]

P005 060E

SNP2NN – 01BA, 01FA and 01DA dimensions

Frame size 4,0 6,0 8,0 011 014 017 019 022 025
43.25 45 49 52 56 59
A
[1.703] [1.772] [1.929] [2.047] [2.205] [2.323]
Dimension
90.0 93.0 97.5 101.5 107.5 111.5 115.5 121.5 125.5
B
[3.543] [3.681] [3.839] [3.996] [4.232] [4.390] [4.574] [4.783] [4.941]
C 13.5 [0.531] 20 [0.787] 23.5 [0.925]
Inlet D 30 [1.181] 40 [1.575]
E M6 M8
c 13.5 [0.531] 20 [0.787]
Outlet d 30 [1.181] 40 [1.575]
e M6 M8

Model code examples and maximum shaft torque

Flange/drive gear Model code example Maximum shaft torque
01DA SNP2NN/014LN01DAP1C7C3NNNN/NNNNN 90 N•m [797 lb•in]
01FA SNP2NN/019LN01FAP1C7C3NNNN/NNNNN 90 N•m [797 lb•in]
01BA SNP2NN/8,0LN01BAP1C3C3NNNN/NNNNN 150 N•m [1328 lb•in]

For further details on ordering, see Model Code, pages 8÷11.

30 520L0557 • Rev DB • Jul 2009

 General Gear Pumps and Gear Motors
Technical Information
Group 2

Gear pump dimensions SNP2NN – 02DB and 02AA mm

(continued) This drawing shows the standard porting for 02DB and 02AA. [in]

02AA

B max 38 [1.496]

Ø 80 -0.090 [3.150 -0.003 ]

-0.002
02DB A ±0.50 [±0.02] 16.5 [0.650]
23.5 [0.952]
5.7 [0.224] 19.3 [0.760]

(44.5 [1.72])

-0.060
90 ±0.25 [3.543 ±0.010]
13.5 [0.531] 12.5 [0.492] 7.2 [0.283]
body width C/c

[0.687]
17.46
A
[1.358]
34.5

120 [4.724] max

(100 [3.937])

M12x1.25-6g
(75.5 [2.972])
A
[0.650 -0.004 ]

[2.579]

15.7 ±0.50 [0.618 ±0.02 ]

65.5
0

45°
Ø 16.5 -0.110

X
0

Ø 0.75 [0.030] X
9 [0.354] (min full thd 12 [0.472] deep) E/e 1 :5

72
Spline: [2.835] D/d ±0.20 [±0.008]
B17x14 DIN 5482
profile offset +0.6 [.024] Nut and washer supplied with pump
92 [3.622] max
A-A Recommended tightening torque: 45-55 Nm

0 0 +0.30 +0.012
3-0.025 [0.118 -0.001] 9 -0.10 [0.354 -0.004 ]

P005 061E

SNP2NN – 02DB and 02AA dimensions

Frame size 4,0 6,0 8,0 011 014 017 019 022 025
39.8 41.1 43.1 47.5 47.5 47.5 47.5 55 64.5
A
[1.567] [1.618] [1.697] [1.870] [1.870] [1.870] [1.870] [2.165] [2.539]
Dimension
92.5 96 100 104 110 114 118 124 128
B
[3.642] [3.780] [3.937] [4.094] [4.331] [4.488] [4.646] [4.882] [5.039]
C 15 [0.591] 20 [0.787]
Inlet D 40 [1.575]
E M6
c 15 [0.591]
Outlet d 35 [1.378]
e M6

Model code examples and maximum shaft torque

Flange/drive gear Model code example Maximum shaft torque
02DB SNP2NN/017LN02DBP1B7B5NNNN/NNNNN 130 N•m [1151 lb•in]
02AA SNP2NN/6,0RN02AAP1B6B5NNNN/NNNNN 140 N•m [1239 lb•in]

For further details on ordering, see Model Code, pages 8÷11.

520L0557 • Rev DB • Jul 2009 31

 General Gear Pumps and Gear Motors
Technical Information
Group 2

Gear pump dimensions SNP2NN – 03CA mm

(continued) This drawing shows the standard porting for 03CA. [in]

03CA

B ±0.50 [±0.02]

A ±0.50 [±0.02] 7.2 [0.286]

+0.70
2 [0.079]
+0.20 +0.008
3.2 0 [0.126 0 ] 6.5 +0.20
0 2.7 0
[0.258 +0.008
0 ] [0.107 0
+0.028
]
90 ±0.25 [3.543 ±0.01] 8.5 [0.335]

Ø 34 [1.338]

Ø 30 [1.181]
X body width 14.3 [0.563]
C/c
12 [0.472]
103 [4.092] max

(60 [2.384])
45.7 [1.799]

-0.083 [0.315 -0.003 ]

-0.001

15.7±0.50 [0.618 ±0.020]

19 [.748]
8 [0.315]
]

[1.882 -0.008 ]
-0.001
[2.047 -0.002

45°
0

8 -0.025
Coupling supplied with pump
-0.030
Ø 52 -0.060

Ø 47.8 -0.20

+0.27
11.5 0
0

O-Ring 45.69 x 2.62 Ø 0.75 [0.030] X

[0.457 +0.011
0 ]
E/e (min full thd 12 [0.472] deep)
30 [1.181] 30 [1.181]
D/d ±0.20 [±0.008]

(60 [2.362 ])
P005 062E

SNP2NN – 03CA dimensions

Frame size 4,0 6,0 8,0 011 014 017 019 022 025
37.3 38.6 40.6 45 45 45 45 52.5 62
A
[1.469] [1.520] [1.598] [1.772] [1.772] [1.772] [1.772] [2.067] [2.441]
Dimension
81.5 85 89 93 99 103 107 113 117
B
[3.209] [3.346] [3.504] [3.661] [3.897] [4.055] [4.212] [4.448] [4.606]
C 15 [0.591] 20 [0.787]
Inlet D 40 [1.575]
E M6
c 15 [0.591]
Outlet d 35 [1.378]
e M6

Model code example and maximum shaft torque

Flange/drive gear Model code example Maximum shaft torque
03CA SNP2NN/014RN03CAP3B7B5NNNN/NNNNN 70 N•m [620 lb•in]

For further details on ordering, see Model Code, pages 8÷11.

32 520L0557 • Rev DB • Jul 2009

 General Gear Pumps and Gear Motors
Technical Information
Group 2

Gear pump dimensions SNP2NN – 04/05DB and 04/05AA mm

(continued) This drawing shows the standard porting for 04/05AA and 04/05DB. [in]

04AA / 05AA
B ±0.50 [0.02] 40.5 [1.594]

04DB / 05DB 04 Body

Ø 50 -0.064 [1.969-0.0025 ]
-0.001
A ±0.50 [±0.02] 19 [0.748]
8.5 [0.335]
26 [1.024] 8.2 [0.323] 19.3 [0.760]
90 ±0.50 [3.543 ±0.010]

14.3 [0.563]
C/c

-0.025
body width

17.46 [0.687]
13.5 [0.531] 7.2 [0.283]

A
103 [4.055] max

(60 [2.362])

M12x1.25-6g
Ø 16.5 -0.110
]

A
[0.65 -0.004

[0.618 ±0.02]
0

15.7 ±0.50
X
0

45°
45.7 [1.799]

+0.27 1 :5
11.5 0
Ø0.75 [0.030] X
[0.453 +0.011 ] (min full thd 12 E/e
0
Spline: [0.472] deep) D/d ±0.20 [±0.008]
30 [1.181] 30 [1.181]
B17x14 DIN 5482
(60 [2.362]) Nut and washer supplied with pump
profile offset +0.6 [0.024]
Recommended tightening torque: 45-55 Nm
05 Body
A-A

[0.354 -0.004 ]
+0.012
0
3 -0.025
0
[0.118 -0.001 ] 9 +0.30
-0.10

P005 063E

SNP2NN – 04/05DB and 04/05AA dimensions

Frame size 4,0 6,0 8,0 011 014 017 019 022 025
37.3 38.6 40.6 45 45 45 45 52.5 62
A
[1.469] [1.520] [1.598] [1.772] [1.772] [1.772] [1.772] [2.067] [2.441]
Dimension
81.5 85 89 93 99 103 107 113 117
B
[3.208] [3.364] [3.503] [3.661] [3.897] [4.055] [4.212] [4.448] [4.606]
C 15 [0.591] 20 [0.787]
Inlet D 40 [1.575]
E M6
c 15 [0.591]
Outlet d 35 [1.378]
e M6

Model code examples and maximum shaft torque

Flange/drive gear Model code example Maximum shaft torque
04DB SNP2NN/8,0LN04DBP1B7B5NNNN/NNNNN
130 N•m [1151 lb•in]
05DB SNP2NN/022RN05DBP1B7B5NNNN/NNNNN
04AA SNP2NN/6,0LN04AAP1B6B5NNNN/NNNNN
140 N•m [1239 lb•in]
05AA SNP2NN/014RN05AAP1B7B5NNNN/NNNNN

For further details on ordering, see Model Code, pages 8÷11.

520L0557 • Rev DB • Jul 2009 33

 General Gear Pumps and Gear Motors
Technical Information
Group 2

Gear pump dimensions SKP2NN – 06SB and SNP2NN – 06SA, 06GA mm

(continued) This drawing shows the standard porting for 06SB, 06GA and 06SA. [in]

06SB (SKP2NN) 06SA (SNP2NN) 06GA

38 [1.496] 31.7 [1.248] 132 [5.197] max B max 31.7 [1.248]

10.5 [0.413] 23.8 [0.937] 7.9 [0.311] 106.38 [4.188] A ±0.50 [0.020]

11 - 11.6 [0.433 - 0.457]

20 [0.787] 7.9 [0.311] 23.8 [0.937]
R 48 [1.889] max
6 [0.236] 12 [0.472] 12 [0.472] 6 [0.236]

A
115.5 [4.547] max

Ø 82.55 -0.050
[3.250 -0.020 ]
0
0
M6-6H- THD 16 [0.630] deep

]
A
Ø 18.631 -0.127 [0.734 -0.005 ]

Ø 15.875 -0.025 [0.625 -0.010

]

15.7 ±0.50 [0.618 ±0.020 ]

[0.609-0.005

0
0

Ø 0.75 [0.030] X

X
Ø 15.456 -0.127

0
0

90 ±0.50 [3.543 ±0.010] Straight thread C/c

body width O-Ring boss

Splined: Splined: A-A

SAE J498-11T-16/32DP SAE J498-9T-16/32DP
Flat root side fit Flat root side fit 0
4.0 -0.03 0
[0.157 -0.001 ] 17.475 -17.729
(circular tooth thickness (circular tooth thickness [0.688 - 0.698]
0.127 mm [0.005] less than 0.127 mm [0.005] less than
standard class 1 fit) standard class 1 fit)
P005 064E

SNP2NN – 06SA, 06GA and SKP2NN – 06SB dimensions

Frame size 4,0 6,0 8,0 011 014 017 019 022 025
43.25 45 47 49 52 54 56 59 61
A
[1.703] [1.772] [1.850] [1.920] [2.047] [2.205] [2.205] [2.323] [2.402]
Dimension
90 93.5 97.5 101.5 107.5 111.5 115.5 121.5 125.5
B
[3.543] [3.681] [3.839] [3.996] [4.232] [4.390] [4.547] [4.783] [4.941]
Inlet C 11/16–12UNF–2B, 18.0 [0.709] deep
Outlet c 7/8–14UNF–2B, 16.7 [0.658] deep

Model code examples and maximum shaft torque

Flange/drive gear Model code example Maximum shaft torque
06GA SNP2NN/6,0RN06GAP1E6E5NNNN/NNNNN 80 N•m [708 lb•in]
06SA (SNP2NN) SNP2NN/011LN06SAP1E6E5NNNN/NNNNN 75 N•m [664 lb•in]
06SB (SKP2NN) SKP2NN/022RN06SBP1E6E5NNNN/NNNNN 150 N•m [1328 lb•in]

For further details on ordering, see Model Code, pages 8÷11.

34 520L0557 • Rev DB • Jul 2009

 General Gear Pumps and Gear Motors
Technical Information
Group 2

Gear pump dimensions SNP2NN – 06SA..BxBxYY../..... mm

(continued) This drawing shows the standard porting for 06SA with port type Bx offset [in]
from center of the body.

06SA..BxBxYY../.....

B max 31.7 [1.248]

132 [5.197] max
A ±0.50 [0.020]
106.38 [4.188]
7.9 [0.311] 23.8 [0.937]
11 - 11.6 [0.433 - 0.457]

R 48 [1.889] max 12 [0.472] 6 [0.236]

C/c 20 [0.787]

Ø 82.55 -0.050
115.5 [4.547] max

[3.250 -0.020 ]
0
0
[0.609 -0.005 ]

15.7 ±0.50 [0.618 ±0.020]

0
Ø 0.75 [0.030] X

45°
X

Ø 15.456 -0.127
0
90 ±0.50 [3.543 ±0.010]
body width

(min full thd 12 mm [0.472] deep) E/e Splined:

SAE J498-9T-16/32DP
D/d ±0.20 [0.008] Flat root side fit
(circular tooth thickness
0.127 mm [0.005] less than
standard class 1 fit)

P005 066E
SNP2NN – 06SA..BxBxYY../..... dimensions
Frame size 4,0 6,0 8,0 011 014 017 019 022 025
49.2 51.4 53.4 53 59 63 67 65.5 60
A
[1.937] [2.023] [2.102] [2.087] [2.322] [2.480] [2.637] [2.579] [2.326]
Dimension
90 93.5 97.5 101.5 107.5 111.5 115.5 121.5 125.5
B
[3.543] [3.681] [3.839] [3.996] [4.232] [4.390] [4.547] [4.783] [4.941]
C 15 [0.591] 20 [0.787]
Inlet D 40 [1.575]
E M6
c 15 [0.591]
Outlet d 35 [1.378]
e M6

Model code examples and maximum shaft torque

Flange/drive gear Model code example Maximum shaft torque
06SA..BxBxYY../..... SNP2NN/019RN06SAP1B7B5YYNN/NNNNN 75 N•m [646 lb•in]

For further details on ordering, see Model Code, pages 8÷11.

520L0557 • Rev DB • Jul 2009 35

 General Gear Pumps and Gear Motors
Technical Information
Group 2

Gear pump dimensions SNP2NN – 09BJ mm

(continued) This drawing shows the standard porting for 09BJ. [in]

09BJ
17.2 ±0.75
[0.677 ±0.03]
21.7
[0.854]
6.3 ±0.75
[0.248 ±0.03] 12.5 ±0.5
[0.492 ±0.02]

[Dia 0.687]
Ø 17.46
90 ±0.25 [3.543 ±0.010]

B B-B
+0.15
9.5 -0.25
0
[0.374 +0.006
-0.01
] 3 -0.025

M12x1.25-6g
B 0
[0.118 -0.001 ]

1: 8

Ø 0.75 [0.03] X
122.5 max
B max 40.5 ±1 [4.823] max
[1.594 ±0.039]
(99.6 [3.921])
A ±0.5 [±0.02]
+0.15
14-15 50.4 49.2 1.7 0
[1.984] [1.937] [0.067 +0.006 ]
[0.551-0.591] 0

19°

(34 [1.339])
(min full thd 12 [0.472] deep) E/e 4.5 ±0.25
3/8-16UNC-2B

[0.177 ±0.01]
Ø 52.34 -0.05
[2.061-0.002 ]

R 10.5 [0.413]
0

103 [4.055] max

0

[1.24]
31.5

(69 [2.717])
15.7 ±0.50 [0.618 ±0.020]

R0
x)
ma

.8
[0 X
1]

.03
.45

1]
m
]
78
[0

ax
1.3
.45

5[

(R 11.45 [0.451] max)

11

C/c
R3
(R

9 [0.354] 19
[0.748]
D/d
Nut and washer supplied with pump
Recommended tightening torque: 45-55 Nm P005067E

SNP2NN – 09BJ dimensions

Frame size 4,0 6,0 8,0 011 014 017 019 022 025
A 37.3 [1.469] 38.6 [1.52] 40.6 [1.598] 45 [1.772] 52.5 [2.067] 62 [2.44]
Dimension
B 90 [3.543] 93.5 [3.68] 97.5[3.839] 101.5 [3.996] 107.5 [4.232] 111.5 [4.390] 115.5 [4.547] 121.5 [4.783] 125.5 [4.94]
C 15 [0.591] 20 [0.787]
Inlet D 40 [1.575]
E M6
c 15 [0.591]
Outlet d 35 [1.378]
e M6

Model code example and maximum shaft torque

Flange/drive gear Model code example Maximum shaft torque
09BJ SNP2NN/014LN09BJP1B7B5NNNN/NNNNN 150 N•m [1328 lb•in]

For further details on ordering, see Model Code, pages 8÷11.

36 520L0557 • Rev DB • Jul 2009

 General Gear Pumps and Gear Motors
Technical Information
Group 2

Gear pump dimensions SNP2NN – A9BJ mm

(continued) This drawing shows the standard porting for A9BJ. [in]
A9BJ
17.2 ±0.50 [0.677 ±0.02]

21.7 [0.854] +0.15 +0.006

9.5 -0.25 [0.374 -0.010 ]
6.3 ±0.75 [0.248 ±0.03]
12.5 ±0.50 [0.492 ±0.02]
B-B

[0.118 -0.001]
90 ±0.25 [3.543 ±0.010 ]

0
B

3 -0.025
B

0
Ø 17.46 [0.687]
M12x1.25-6g
1:8 122.5 [4.823] max

(99.6 [3.921])
B max 40.5 ±1
[1.594 ±0.039 ] 49.2 50.4

[2.061 -0.002 ]
[1.937] [1.984]
A ±0.5 [0.02]
0
14-15

x
ma
[0.551-0.591]
13° +0.15

96]
3.85 0
Ø 52.34 -0.05

4.0 ±0.50

[1.4
0

[0.152 +0.006

3/8-16UNC-2B
Min. full thread E/e ]
[0.157 ±0.02] 0

R38
12 [0.472] deep

109 [4.291] max

(R1
1.4
5 [
0.4
51
] m
15.7 ±0.5 [0.618 ±0.02 ]

ax)
R0

Ø 0.75 [0.03] X
.8
[0

X
.0
31
]m
ax

C/c

D/d

Nut and washer supplied with pump

Recommended tightening torque: 45-55 Nm P005068E

SNP2NN – A9BJ dimensions

Frame size 4,0 6,0 8,0 011 014 017 019 022 025
A 37.3 [1.469] 38.6 [1.52] 40.6 [1.598] 45 [1.772] 52.5 [2.067] 62 [2.44]
Dimension
B 90 [3.543] 93.5 [3.68] 97.5[3.839] 101.5 [3.996] 107.5 [4.232] 111.5 [4.390] 115.5 [4.547] 121.5 [4.783] 125.5 [4.94]
C 15 [0.591] 20 [0.787]
Inlet D 40 [1.575]
E M6
c 15 [0.591]
Outlet d 35 [1.378]
e M6

Model code example and maximum shaft torque

Flange/drive gear Model code example Maximum shaft torque
A9BJ SNP2NN/014LNA9BJP1B7B5NNNN/NNNNN 150 N•m [1328 lb•in]

For further details on ordering, see Model Code, pages 8÷11.

520L0557 • Rev DB • Jul 2009 37

 General Gear Pumps and Gear Motors
Technical Information
Group 2

Gear motor dimensions SNM2NN – 01DA, 01FA and 01BA mm

This drawing shows the standard porting for 01DA, 01FA and 01BA. [in]

01BA

01DA 01FA B max 40.5 [1.596]

A ±0.50 [0.020] 17 [0.670]

19.5 [0.768] 36.5 [1.438]

(41.9 [1.651])
6.3 [0.248] 21.7 [0.854]
Ø15 -0.018[0.591-0.001]

10 [0.394] 30 [1.182] 90 ±0.25[3.546 ±0.010]

0

body width 18 [0.709] 5 [0.020]

-0.002 ]
-0.025
Ø 36.5 -0.050
[1.438 -0.001
Ø 17.46 [0.687]
6.5 [0.256] 6.5 [0.256]
0

B A
[1.277]
32.4

[1.24 ±0.020]

115.2 [4.539] max

31.4 ±0.50
(96.2 [3.790])

M12x1.25-6g
(73.3 [2.888])
B
[2.514]
]

A
[0.650 -0.004

63.8

15.7 ±0.50 [0.619 ±0.020]

C/c
0

X
Ø 16.5 -0.110
0

M6 thread 16 [.630] deep 1 :8

9 [3.55]
(min full thd 12 [0.472] deep) E/e
Spline: Ø 0.75 [0.030] X
B17x14 DIN 5482 71.5 D/d ±0.20 [0.008]
Profile offset +0.6 [0.024] [2.817]
B-B 1/4 Gas Drain port
0
4 -0.030
0
[0.158-0.001] Nut and washer supplied with pump
90 [3.546] max Recommended tightening torque: 45-55 Nm

A-A
0 0
4 -0.030 [0.158-0.001] +0.006
16.5 +0.10
+0.004 9.5 +0.15
-0.25 [0.374 -0.010 ]
-0.20 [0.650 -0.008 ]

P005 070E

SNM2NN – 01DA, 01FA and 01BA dimensions

Frame size 6,0 8,0 011 014 017 019 022 025
45 49 52 56 59
A
[1.771] [1.929] [2.047] [2.204] [2.322]
Dimension
93.5 97.5 101.5 107.5 111.5 121.5 125.5
B
[3.681] [3.838] [3.996] [4.232] [4.389] [4.783] [4.940]
13.5 20 23.5
C/c
[0.531] [0.787] [0.925]
Inlet/Outlet
D/d 30 [1.181] 40 [1.575]
E/e M6 M8

Model code examples and maximum shaft torque

Flange/drive gear Maximum shaft torque
Model code example
configuration [lb•in]
01DA SNM2NN/8,0BN01DAM1C3C3NNNN/NNNNN 90 N•m [797 lb•in]
01FA SNM2NN/022BN01FAM1C7C7NNNN/NNNNN 90 N•m [797 lb•in]
01BA SNM2NN/017BN01BAM1C7C7NNNN/NNNNN 150 N•m [1328 lb•in]

For further details on ordering, see Model Code, pages 8÷11.

38 520L0557 • Rev DB • Jul 2009

 General Gear Pumps and Gear Motors
Technical Information
Group 2

Gear motor dimensions SNM2NN – 02DB and 02AA mm

(continued) This drawing shows the standard porting for 02AA and 02DB. [in]

02AA
B max 38 [1.496]

Ø 80 --0.090 [3.150 -0.003 ]

-0.002
02DB A ±0.50 16.5 [0.650]

(44.5 [1.72])
23.5 [0.952] 5.7 [0.224] 19.3 [0.760]
90 ±0.25 [ 3.543 ±0.010 ]

0.060
body width
13.5 [0.531] C/c 12.5 [0.492] 7.2 [0.283]

31.4 ±0.5 [1.24 ±0.0197 ]

[0.687]
17.46
A
[1.358]
34.5

120 [4.724] max

(100 [3.937])

(75.5 [2.972])

M12x1.25-6g
A
Ø 16.5 -0.110 [0.650 -0.004 ]

[2.579]

15.7±0.50 [0.618 ±0.020]

65.5
0

45°
X
0

9 [0.354] (min full thd 12 [0.472] deep) E/e 1 :5

Ø 0.75 [0.030] X

Spline: B17x14 DIN 5482 72 1/4 Gas D/d ±0.20 [0.008]

Profile offset +0.6 [.024] [2.835] Drain port
Nut and washer supplied with pump
92 [3.622] max Recommended tightening torque: 45-55 Nm
A-A
0 0 +0.30 +0.012
3 -0.025 [0.118 -0.001 ] 9 -0.10 [0.354 -0.004 ]

P005 071E

SNM2NN – 02DB and 02AA dimensions

Frame size 6,0 8,0 011 014 017 019 022 025
41.1 43.1 47.5 47.5 47.5 47.5 55 64.5
A
[1.618] [1.697] [1.870] [1.870] [1.870] [1.870] [2.165] [2.539]
Dimension
96 100 104 110 114 118 124 128
B
[3.780] [3.937] [4.094] [4.331] [4.488] [4.646] [4.882] [5.039]
C/c 15 [0.591] 20 [0.787]
Inlet/Outlet D/d 35 [1.378] 40 [1.575]
E/e M6

Model code examples and maximum shaft torque

Flange/drive gear Model code example Maximum shaft torque
02DB SNM2NN/025BN02DBM1B7B7NNNN/NNNNN 90 N•m [797 lb•in]
02AA SNM2NN/8,0BN02AAM1B5B5NNNN/NNNNN 140 N•m [1239 lb•in]

For further details on ordering, see Model Code, pages 8÷11.

520L0557 • Rev DB • Jul 2009 39

 General Gear Pumps and Gear Motors
Technical Information
Group 2

Gear motor dimensions SNM2NN – 03CA mm

(continued) This drawing shows the standard porting for 03CA. [in]

03CA

8.5 [0.335] B ±0.50 [±0.02]

90 ±0.25 [3.576 ±0.010] A ±0.50 [±0.02] 7.2 [0.286]

body width
+0.20 +0.008 12 [0.477]
+0.20
2 [0.079] 3.2 0 [0.127 0 ] 6.5 0
+0.008
[0.258 0 ] 2.7 +0.70 +0.028 ]
0 [0.107 0

Ø 34 [1.351]

Ø 30 [1.192]
X [0.568]
31.4 ±0.50 [1.24 ±0.0197]

C/c
14.3
103 [4.092] max

(60 [2.384])
[1.816]

-0.083 [0.318 -0.003 ]

+0.001
45.7

19 [.755]
15.7 ±0.50 [0.624 ±0.020]
8 [0.315]
Ø 52 -0.060 [2.066 -0.002 ]

[1.899-0.008 ]
-0.001

45°
0

8 +0.025
-0.030

Ø 47.8 -0.20

+0.27
11.5 0
0

1/4 gas drain port Ø 0.75 [0.030] X Coupling supplied with pump
30 30 [0.457 +0.011
0 ]
[1.192] [1.192]
E/e (min full thd 12 [0.477] deep)
O-ring 45.69 x 2.62 (60 [2.384])
D/d ±0.20 [±0.008]

P005 072E

SNM2NN – 03CA dimensions

Frame size 6,0 8,0 011 014 017 019 022 025
38.6 40.6 45 52.5 62
A
[1.520] [1.598] [1.772] [2.067] [2.441]
Dimension
85 89 93 99 103 107 113 117
B
[3.364] [3.503] [3.661] [3.897] [4.055] [4.212] [4.448] [4.606]
C/c 15 [0.591] 20 [0.787]
Inlet/Outlet D/d 35 [1.378] 40 [1.575]
E/e M6

Model code examples and maximum shaft torque

Flange/drive gear Model code example Maximum shaft torque
03CA SNM2NN/014BN03CAM3B5B5NNNN/NNNNN 70 N•m [620 lb•in]

For further details on ordering, see Model Code, pages 8÷11.

40 520L0557 • Rev DB • Jul 2009

 General Gear Pumps and Gear Motors
Technical Information
Group 2

Gear motor dimensions SNM2NN – 04/05DB and 04/05AA mm

(continued) This drawing shows the standard porting for 04/05DB, 04/05AA. [in]

04AA / 05AA
04DB / 05DB 04 Body 8.5 [0.335] B ±0.50 [±0.02] 40.5 [1.594]

-0.050 [1.969 -0.002 ]

-0.001
90 ±0.25 [0.010] A ±0.50 [±0.02] 19 [0.748]
26 [1.024]
body width
8.2 [0.323] 19.3 [0.760]
13.5 [0.531] +0.27
11.5 0

Ø 50 -0.025
Ø0.75 [0.030] X C/c 7.2 [0.283]
[0.453 +0.011 ]

[0.563]
0

14.3

[0.687]
17.46
A
103 [4.055] max

31.4 ±0.50 [1.24 ±0.02]

(60 [2.362])
[1.799]
45.7

M12x1.25-6g
[0.650 -0.004 ]

15.7 ±0.50 [0.618 ±0.02]

A
0

45°
X
Ø 16.5 -0.110
0

1/4 Gas Drain port (min full thd 12 [0.472] deep) E/e 1 :5
30 30
[1.181] [1.181]
Spline: D/d ±0.20 [±0.008]
B17x14 DIN 5482
(60 [2.362])
Profile offset +0.6 [0.024] Nut and washer supplied with pump
Recommended tightening torque: 45-55 Nm
05 Body

-0.10 [0.354 -0.004 ]

+0.012
A-A
0 0
3 -0.025 [0.118-0.001]

9 +0.30 P005073E

SNM2NN – 04/05DB and 04/05AA dimensions

Frame size 6,0 8,0 011 014 017 019 022 025
38.6 40.6 45 52.5 62
A
[1.520] [1.598] [1.772] [2.067] [2.441]
Dimension
85 89 93 99 103 107 113 117
B
[3.364] [3.503] [3.661] [3.897] [4.055] [4.212] [4.448] [4.606]
C/c 15 [0.591] 20 [0.787]
Inlet/Outlet D/d 35 [1.378] 40 [1.575]
E/e M6

Model code examples and maximum shaft torque

Flange/drive gear Model code example Maximum shaft torque
04DB SNM2NN/8,0BN04DBAM1B5B5NNNN/NNNNN
130 N•m [1151 lb•in]
05DB SNM2NN/017BN05DBM1B5B5NNNN/NNNNN
04AA SNM2NN/8,0BN04AAM1B5B5NNNN/NNNNN
140 N•m [1239 lb•in]
05AA SNM2NN/017BN05AAM1B5B5NNNN/NNNNN

For further details on ordering, see Model Code, pages 8÷11.

520L0557 • Rev DB • Jul 2009 41

 General Gear Pumps and Gear Motors
Technical Information
Group 2

Gear motor dimensions SNM2NN – 06GA and 06SA mm

(continued) This drawing shows the standard porting for 06GA and 06SA. [in]

06GA 06SA

31.7 [1.248] 132 [5.197] max B max 31.7

Ø 82.55 -0.50 [3.250 -0.020]

[1.248]
A ±0.50 [0.020]

0
23.8 7.9 [0.311] 106.38 [4.188]
[0.937]

11 - 11.6 [0.433 - 0.457]

20 [0.787] 7.9 [0.311] 23.8 [0.937]
R 48 [1.889] max

0
12 [0.472] 6 [0.236]

31.4 ±0.5 [1.24 ±0.02]

A
115.5 [4.547] max

M6-6H- THD 16mm [0.630] deep

Ø 15.456 -0.127 [0.609-0.005 ]

A
Ø 0.75 [0.030] X

15.7 ±0.50 [0.618 ±0.020 ]

]
0

Ø 15.875 -0.025 [0.625 -0.010

0
X
0

Straight thread C/c

0
90±0.25 [3.543±0.010] O-ring boss
9/16-18UNF-2B body width
Straight thread
O-ring boss A-A
0 0
17.475 -17.729
3.995 -0.025 [0.157 -0.010 ] [0.688 - 0.698]
Splined SAE J498-9T-16/32DP
flat root side fit (circular tooth thickness 0.127 [0.005]
less than standard class 1 fit)
P005 074E

SNM2NN – 06GA and 06SA dimensions

Frame size 6,0 8,0 011 014 017 019 022 025
45 47 49 52 54 56 59 61
A
[1.772] [1.85] [1.92] [2.047] [2.205] [2.205] [2.323] [2.402]
Dimension
93.5 97.5 101.5 107.5 111.5 115.5 121.5 125.5
B
[3.681] [3.839] [3.996] [4.232] [4.390] [4.547] [4.783] [4.941]
1 1/16–12UNF–2B,
Inlet/Outlet C/c / –14UNF–2B, 16.7 [0.658] deep
7 8
18 [0.709] deep

Model code examples and maximum shaft torque

Flange/drive gear Model code example Maximum shaft torque
06GA SNM2NN/017BN06GAM6E5E5NNNN/NNNNN 80 N•m [708 lb•in]
06SA SNM2NN/8,0BN06SAM1E5E5NNNN/NNNNN 75 N•m [664 lb•in]

For further details on ordering, see Model Code, pages 8÷11.

42 520L0557 • Rev DB • Jul 2009

 General Gear Pumps and Gear Motors
Technical Information
Group 2

Group 2 pump ports Available pump ports for Group 2

B C E F

45o

a d e f
c (4 holes min. full thd. g h (4 holes min. full thd.
b 10 [0.394] deep) 10 [0.394] deep)

Dimensions of Group 2 pumps ports

Port type B C E F
Port dimensions a b c d g h e f
Inlet 15 [0.591] 40 [1.575] M6 13.5 [0.531] 30 [1.181] M6 11⁄16–12UNF–2B ½ Gas (BSPP)
4,0
Outlet 15 [0.591] 35 [1.378] M6 13.5 [0.531] 30 [1.181] M6 7⁄8–14UNF–2B ½ Gas (BSPP)
Inlet 15 [0.591] 40 [1.575] M6 13.5 [0.531] 30 [1.181] M6 11⁄16–12UNF–2B ½ Gas (BSPP)
6,0
Outlet 15 [0.591] 35 [1.378] M6 13.5 [0.531] 30 [1.181] M6 7⁄8–14UNF–2B ½ Gas (BSPP)
Inlet 20 [0.787] 40 [1.575] M6 13.5 [0.531] 30 [1.181] M6 11⁄16–12UNF–2B ½ Gas (BSPP)
8,0
Outlet 15 [0.591] 35 [1.378] M6 13.5 [0.531] 30 [1.181] M6 7⁄8–14UNF–2B ½ Gas (BSPP)
Inlet 20 [0.787] 40 [1.575] M6 13.5 [0.531] 30 [1.181] M6 11⁄16–12UNF–2B ¾ Gas (BSPP)
011
Outlet 15 [0.591] 35 [1.378] M6 13.5 [0.531] 30 [1.181] M6 7⁄8–14UNF–2B ½ Gas (BSPP)
Frame size

Inlet 20 [0.787] 40 [1.575] M6 20.0 [0.787] 40 [1.575] M6 11⁄16–12UNF–2B ¾ Gas (BSPP)

014
Outlet 15 [0.591] 35 [1.378] M6 13.5 [0.531] 30 [1.181] M6 7⁄8–14UNF–2B ½ Gas (BSPP)
Inlet 20 [0.787] 40 [1.575] M6 20.0 [0.787] 40 [1.575] M6 11⁄16–12UNF–2B ¾ Gas (BSPP)
017
Outlet 15 [0.591] 35 [1.378] M6 13.5 [0.531] 30 [1.181] M6 7⁄8–14UNF–2B ½ Gas (BSPP)
Inlet 20 [0.787] 40 [1.575] M6 20.0 [0.787] 40 [1.575] M6 11⁄16–12UNF–2B ¾ Gas (BSPP)
019
Outlet 15 [0.591] 35 [1.378] M6 13.5 [0.531] 30 [1.181] M6 7⁄8–14UNF–2B ½ Gas (BSPP)
Inlet 20 [0.787] 40 [1.575] M6 20.0 [0.787] 40 [1.575] M6 11⁄16–12UNF–2B ¾ Gas (BSPP)
022
Outlet 15 [0.591] 35 [1.378] M6 13.5 [0.531] 30 [1.181] M6 7⁄8–14UNF–2B ½ Gas (BSPP)
Inlet 20 [0.787] 40 [1.575] M6 23.5 [0.925] 40 [1.575] M8 11⁄16–12UNF–2B 1 Gas (BSPP)
025
Outlet 15 [0.591] 35 [1.378] M6 20.0 [0.787] 40 [1.575] M8 7⁄8–14UNF–2B ¾ Gas (BSPP)

520L0557 • Rev DB • Jul 2009 43

 General Gear Pumps and Gear Motors
Technical Information
Group 2

Group 2 motor ports Available motor ports for Group 2

B C E F

45o

a d e f
c (4 holes min. full thd. g h (4 holes min. full thd.
b 10 [0.394] deep) 10 [0.394] deep)

Dimensions of Group 2 motors ports

Port type B C E F
Port dimensions a b c g d h e f
6,0 Inlet/Outlet 15 [0.591] 35 [1.378] M6 30 [1.181] 13.5 [0.531] M6 7⁄8–14UNF–2B ½ Gas (BSPP)
8,0 Inlet/Outlet 15 [0.591] 35 [1.378] M6 30 [1.181] 13.5 [0.531] M6 7⁄8–14UNF–2B ½ Gas (BSPP)
011 Inlet/Outlet 15 [0.591] 35 [1.378] M6 30 [1.181] 13.5 [0.531] M6 7⁄8–14UNF–2B ½ Gas (BSPP)
Frame size

014 Inlet/Outlet 15 [0.591] 35 [1.378] M6 40 [1.575] 20.0 [0.787] M8 7⁄8–14UNF–2B ½ Gas (BSPP)
017 Inlet/Outlet 15 [0.591] 35 [1.378] M6 40 [1.575] 20.0 [0.787] M8 7⁄8–14UNF–2B ½ Gas (BSPP)
019 Inlet/Outlet 20 [0.787] 40 [1.575] M6 40 [1.575] 20.0 [0.787] M8 11⁄16–12UNF–2B ¾ Gas (BSPP)
022 Inlet/Outlet 20 [0.787] 40 [1.575] M6 40 [1.575] 20.0 [0.787] M8 11⁄16–12UNF–2B ¾ Gas (BSPP)
025 Inlet/Outlet 20 [0.787] 40 [1.575] M6 40 [1.575] 23.5 [0.925] M8 11⁄16–12UNF–2B ¾ Gas (BSPP)
Drain ¼ Gas (BSPP) 9⁄16–18UNF–2B ¼ Gas (BSPP)

44 520L0557 • Rev DB • Jul 2009

 General Gear Pumps and Gear Motors
Technical Information
Group 2

Shaft options Group 2 pumps are available with a variety of splined, parallel, and tapered shaft ends.
Not all shaft styles are available with all flange styles.

Valid combinations and nominal torque ratings are shown in the table below. Torque
ratings assume no external radial loading. Applied torque must not exceed these limits
regardless of pressure parameters stated earlier. Maximum torque ratings are based on
shaft torsional fatigue strength.

Recommended mating splines for Group 2 splined output shafts should be in

accordance with SAE J498 or DIN 5482. Sauer-Danfoss external SAE splines are flat
root side fit with circular tooth thickness reduced by 0.127 mm [0.005 in] in respect to
class 1 fit. The external DIN splines have an offset increased by 0.1 mm [0.004 in.] These
dimensions are modified in order to assure a clearance fit with the mating spline.

Other shaft options may exist. Contact your Sauer- Danfoss representative for availability.

Shaft and flange Shaft and flange availability and torque capability
availability This table details the standard Group 2 shafts and flange combinations that are currently
available with the maximum shaft torque limits. For further information, please see
Sauer-Danfoss publications Group 2 Gear Pumps Technical Information, 520L0560 and
Group 1, 2 and 3 Gear Motors, Technical Information, 520L0568.

Shaft and flange availability and torque capability

Shaft Mounting flange code with maximum torque in N•m [lb•in]
Description Code 01 02 03 04 05 06 09 0B
Taper 1:5 AA – 140 [1239] – 140 [1239] 140 [1239] – – –
Taper 1:8 BA 150 [1328] – – – – – 150 [1328] 150 [1328]
DIN spline 9T, B17x14 DA 90 [797] – – – – – – –
DIN spline 9T, B17x14 DB – 130 [1151] – 130 [1151] 130 [1151] – – –
SAE spline 9T, 16/32p SA – – – – – 75 [646] – –
SAE spline 11T, 16/32p SB – – – – – 150 [1328] – –
Parallel 15 mm [0.590 in] FA 90 [797] – – – – – – –
Parallel 15.875 mm [0.625 in] GA – – – – – 80 [708]
Sauer-Danfoss Tang CA – – 70 [620] – – – – –

520L0557 • Rev DB • Jul 2009 45

 General Gear Pumps and Gear Motors
Technical Information
Group 3

Overview Sauer-Danfoss’ Group 3 Series of gear pumps and motors uses an external spur gear, and
positive displacement design pump of proven high pressure and efficiency. Constructed
of three-piece aluminum body, it has been repeatedly proven, with over 30 years
experience in hydraulic products for mobile and industrial applications.

The extruded aluminum housing provides the necessary strength construction while
providing a very high power to weight ratio and increased heat dissipation.
Its aluminum housing permits the gear teeth to cut in toward the inlet side and create
their own path for maximum radial gear tip seal and high volumetric efficiency.

The Group 3 Series is composed of the SNP3NN gear pump and two motors:
the bi-directional SNM3NN and uni-directional SNU3NN. They look like this:

F005 033 F005 045

Design Super finished shaft journals, floating

pressure plates, and Teflon coated
large DU bearings are protected by an
extruded aluminum alloy gear housing.
The one-piece shaft is set within a high-
strength aluminum flange and cover,
open to numerous options, including.

F005 034

Features Special features within Group 3 family include:

• wide range of displacements (from 22 to 90 cm3/rev [1.34 to 5.49 in3/rev] for pumps
and motors)
• SAE, DIN, and European standard mounting flanges
• high quality case hardened steel gears
• pressure plates that provide efficiency at all speeds
• contact force between bearing face and gear is low and precisely controlled
• volumetric efficiencies in the range of 95%
• multiple pump configurations in combination with SNP1NN, SNP2NN and SNP3NN.

46 520L0557 • Rev DB • Jul 2009

 General Gear Pumps and Gear Motors
Technical Information
Group 3

Technical data for pumps

Technical data for SNP3NN
Frame size
022 026 033 038 044 048 055 063 075 090
cm3/rev 22.1 26.2 33.1 37.9 44.1 48.3 55.1 63.4 74.4 88.2
Displacement
[in3/rev] [1.35] [1.60] [2.02] [2.32] [2.69] [2.93] [3.36] [3.87] [4.54] [5.38]
270 270 270 270 270 250 250 230 200 170
Peak pressure
[3910] [3910] [3910] [3910] [3910] [3625] [3625] [3350] [2910] [2465]
bar [psi]
250 250 250 250 250 230 230 210 180 150
Rated pressure
[3625] [3625] [3625] [3625] [3625] [3336] [3336] [3045] [2610] [2175]
Minimum speed 800 800 800 800 800 800 800 600 600 600
min-1 (rpm)
Maximum speed 3000 3000 3000 3000 3000 3000 2500 2500 2500 2500
6.8 6.8 7.2 7.3 7.5 7.6 7.8 8.1 8.5 8.9
Weight kg [lb]
[15.0] [15.0] [15.8] [16.1] [16.5] [16.8] [17.3] [17.9] [18.7] [19.6]
Moment of inertia of x 10-6 kg•m2 198 216 246 267,2 294,2 312,2 342,3 378,3 426,4 486,5
rotating components [x 10-6 lbf•ft2] [4698] [5126] [5838] [6340] [6891] [7408] [8123] [8977] [10118] [11545]
Theoretical flow at l/min 66.3 78.6 99.3 113.7 132.3 144.9 137.8 158.5 186 220.5
maximum speed [US gal/min] [17.5] [20.8] [26.2] [30.0] [35.0] [38.3] [36.4] [41.8] [49.1] [58.3]

1 kg•m2 = 23.68 lb•ft2

Technical data for SEP3NN
Frame size
022 026 033 038 044
cm3/rev 22.1 26.2 33.1 37.9 44.1
Displacement
[in3/rev] [1.35] [1.60] [2.02] [2.32] [2.69]
230 230 230 230 200
Peak pressure
[3336] [3336] [3336] [3336] [2910]
bar [psi]
210 210 210 210 180
Rated pressure
[3045] [3045] [3045] [3045] [2610]
Minimum speed 1000 1000 1000 1000 800
min-1 (rpm)
Maximum speed 3000 3000 3000 2800 2600
5.7 5.8 6.1 6.2 6.4
Weight kg [lb]
[12.57] [12.79] [13.45] [13.67] [14.11]
Moment of inertia of x 10-6 kg•m2 198 216 246 294.2 312.2
rotating components [x 10-6 lbf•ft2] [4698] [5126] [5873] [6981] [7408]
Theoretical flow at l/min 66.3 78.6 99.3 113.7 132.3
maximum speed [US gal/min] [17.5 [20.8] [26.2] [30.0] [35.0]

These tables detail the technical data for the SNP3NN and SEP3NN gear pumps.
The SNP3NN is a standard product. For further information about application and
configuration of gear pumps, please see Sauer-Danfoss publication Group 3 Gear Pumps
Technical Information, 520L0569.

C Caution
The rated and peak pressure mentioned are for pumps with flanged ports only. When
threaded ports are required a de-rated performance has to be considered. To verify the
compliance of an high pressure application with a threaded ports pump apply to
a Sauer-Danfoss representative.

520L0557 • Rev DB • Jul 2009 47

 General Gear Pumps and Gear Motors
Technical Information
Group 3

Technical data for motors

Technical data – Group 3 gear motors

Frame size
022 026 033 038 044 048 055 063 075 090
cm3/rev 22.1 26.2 33.1 37.9 44.1 48.3 55.2 63.4 74.4 88.2
Displacement
[in3/rev] [1.35] [1.60] [2.02] [2.32] [2.69] [2.93] [3.36] [3.87] [4.54] [5.38]
SNU3NN (uni-directional)
270 270 270 270 270 250 230 210 190 170
Peak pressure
[3915] [3915] [3915] [3915] [3915] [3625] [3336] [3045] [2755] [2465]
bar [psi]
250 250 250 250 250 230 210 190 170 150
Rated pressure
[3625] [3625] [3625] [3625] [3625] [3336] [3045] [2755] [2465] [2175]
Minimum speed 800 800 800 800 800 800 800 600 600 600
min-1 (rpm)
Maximum speed 2500 2500 2500 2500 2300 2300 2300 2300 2100 2100
SNM3NN (bi-directional) motor in parallel
270 270 270 270 270 250 230 210 190 170
Peak pressure
[3915] [3915] [3915] [3915] [3915] [3625] [3335] [3045] [2755] [2465]
bar [psi]
250 250 250 250 250 230 210 190 170 150
Rated pressure
[3625] [3625] [3625] [3625] [3625] [3336] [3045] [2755] [2465] [2175]
Minimum speed 800 800 800 800 800 800 800 800 800 800
min-1 (rpm)
Maximum speed 2500 2500 2500 2500 2300 2300 2300 2300 2100 2100
SNM3NN (bi-directional) motor in series
250 250 250 250 250 230 210 190 170 150
Peak pressure
[3625] [3625] [3625] [3625] [3625] [3336] [3045] [2755] [2465] [2175]
bar [psi]
250 250 250 250 250 230 210 190 170 150
Rated pressure
[3625] [3625] [3625] [3625] [3625] [3336] [3045] [2755] [2465] [2175]
Minimum speed 800 800 800 800 800 800 800 800 800 800
min-1 (rpm)
Maximum speed 2500 2500 2500 2500 2300 2300 2200 2100 2100 2100
All (SNU3NN, SNM3NN)
6.8 6.8 7.2 7.3 7.5 7.6 7.8 8.1 8.5 8.9
Weight kg [lb]
[15] [15] [15.8] [16.1] [16.5] [16.8] [17.3] [17.9] [18.7] [19.6]
Moment of inertia of x 10-6 kg•m2 198 216 246 267.2 294.2 312.2 342.3 378.3 426.4 486.5
rotating components [x 10-6 lb•ft2] [4698] [5126] [5837] [6341] [6981] [7408] [8123] [8977] [10 118] [11 545]

1 kg•m2 = 23.68 lb•ft2

This table details the technical data for the SNM3NN and SNU3NN gear motors. For
further information about application and configuration of gear motors, please
see Sauer-Danfoss publication Group 1, 2 and 3 Gear Motors, Technical Information,
520L0568.

C Caution
The rated and peak pressure mentioned are for motors with flanged ports only. When
threaded ports are required a de-rated performance has to be considered. To verify the
compliance of an high pressure application with a threaded ports pump apply to
a Sauer-Danfoss representative.

48 520L0557 • Rev DB • Jul 2009

 General Gear Pumps and Gear Motors
Technical Information
Group 3

Gear pump dimensions SNP3NN – 01FA, 01DA, 01BA and SEP3NN – 01BA mm
The drawing shows the SNP3NN standard porting for 01FA, 01DA and 01BA. [in]
The configuration 01BA is available for the SEP3NN and only up to 44cc.

01BA
46.5 [1.83] B max
20 [0.787] A ±0.75 [±0.03]
01FA 01DA
14.5 [0.571] 24 8 [0.314]

(54.3 [2.137])
[0.944] 115 ±0.25 [4.527 ±0.010]

42.9 [1.689]
46 [1.118] 34 [1.338]

-0.076
Ø 50.8 -0.030
5 [0.196] 22 [0.866]

-0.003 ]

Ø 22 [0.866]
[2.0 -0.001
40 [1.574] 6 [0.236] Distance from 5 [0.196] Distance from

M14x1.5-6g
front flange front flange
to shoulder to shoulder
A B

150.5 [5.925] max

148 [ 5.826] max
(128.1 [5.043])
A

85.2 [3.354]

(96.2 [3.787])
B
]
Ø 21.5 -0.130
[0.846 -0.005
[0.787-0.0008 ]

24 [0.944] [0.874 ±0.020]

0

M8 (full thd 18 [0.708] deep)

0

X
22.22 ±0.50
0

1:8

Spline:
Ø 20 -0.021

A-A
0

B22x19 DIN 5482 C/c

0 0
5 -0.030 [0.196-0.001 ] (Profile offset -0.10 [0.024])
M8 (full thd 12 [0.472] deep) E/e 11.0-11.5 [0.433-0.453]
M10 (full thd 17 [0.669] deep)

Ø0.75 [0.030] X
98.4 [3.874]
< 40: ±0.20 [0.008] D/d
Nut and washer supplied with pump
-0.20 [0.866 -0.008 ]
+0.004

> 40: ±0.25 [0.010] 121.5 [4.783] max

Recommended tightening torque: 75-85 Nm
B-B
0 0
4 -0.030 [0.158 -0.001]
22 +0.10

11.5 +0.30 +0.010

-0.10 [0.453 -0.004 ]
P005 078E

SNP3NN – 01FA, 01BA, 01DA and SEP3NN – 01BA dimensions

Frame size 022 026 033 038 044 048 055 063 075 090
63 64.5 67 68.8 71 72.5 75 78 82 87
A
[2.480] [2.539] [2.637] [2.708] [2.795] [2.854] [2.952] [3.07] [3.228] [3.425]
Dimension
132.5 135.5 140.5 144 148.5 151.5 156.5 162.5 170.5 180.5
B
[5.216] [5.334] [5.531] [5.669] [5.846] [5.964] [6.161] [6.397] [6.712] [7.106]
C 20 [0.787] 27 [1.063] 36 [1.417]
Inlet D 40 [1.575] 51 [2.007] 62 [2.441]
E M8 M10
c 20 [0.787] 27 [1.063]
Outlet d 40 [1.575] 51 [2.001]
e M8 M10

The SEP3NN overall length is 12 mm [0.472 in] less than the SNP3NN for the whole range
of displacements (22.1 to 44.1 cm3/rev [1.35 to 2.69 in3/rev]).

Model code examples and maximum shaft torque

Flange/drive gear Model code example Maximum shaft torque
01DA SNP3NN/075LN01DAP1CDCANNNN/NNNNN 290 N•m [2566 lb•in]
01FA SNP3NN/033RN01FAP1CAC7NNNN/NNNNN 210 N•m [1858 lb•in]
01BA SNP3NN/022RN01BAP1C7C7NNNN/NNNNN 350 N•m [3097 lb•in]

For further details on ordering, see Model Code, pages 8÷11.

520L0557 • Rev DB • Jul 2009 49

 General Gear Pumps and Gear Motors
Technical Information
Group 3

Gear pump dimensions SNP3NN – 02FA, 02DA and 02BA mm

(continued) This drawing shows the standard porting for 02FA, 02DA and 02BA. [in]

02BA
46.5 [1.83] B max
20 [0.787] A ±0.75 [±0.03]
02FA 02DA
14.5 [0.571] 24 8 [0.314]

58 [2.28] max
[0.944]
46 [1.118] 34 [1.338] 124.5 [4.9] max

-0.076
Ø 50.8 -0.030
5 [0.196] 22 [0.866]

45 [1.77]
-0.003 ]
98.4 [3.87]

Ø 22 [0.866]
[2.0 -0.001
40 [1.574] 6 [0.236] Distance from 5 [0.196] Distance from

M14x1.5-6g
front flange front flange
to shoulder to shoulder
A B

148 [ 5.826] max

163 [6.42] max

(137 [5.39])
A B

105 [4.13] max

]
Ø 21.5 -0.130
[0.846 -0.005

92 [3.62]
[0.787-0.0008 ]

24 [0.944]
[0.874 ±0.020]
0

M8 (full thd 18 [0.708] deep) X

0

22.22 ±0.50

44.44 ±0.75 [1.75 ±0.03]

0

1:8

Spline:
Ø 20 -0.021

A-A
0

B22x19 DIN 5482 C/c

0 0
5 -0.030 [0.196-0.001 ] (Profile offset -0.10 [0.024])
M8 (full thd 12 [0.472] deep) E/e 115 ±0.25 [4.527 ±0.010]
M10 (full thd 17 [0.669] deep) body width
11.0-11.5 [0.433-0.453]
Nut and washer supplied with pump < 40: ±0.20 [0.008] D/d
-0.20 [0.866 -0.008 ]
+0.004

Recommended tightening torque: 75-85 Nm > 40: ±0.25 [0.010]

Ø0.75 [0.030] X
B-B
0 0
4 -0.030 [0.158 -0.001]
22 +0.10

11.5 +0.30 +0.010

-0.10 [0.453 -0.004 ]
P005 079E

SNP3NN – 02FA, 02DA and 02BA dimensions

Frame size 022 026 033 038 044 048 055 063 075 090
63 64.5 67 68.8 71 72.5 75 78 82 87
A
[2.480] [2.539] [2.637] [2.708] [2.795] [2.854] [2.952] [3.07] [3.228] [3.425]
Dimension
132.5 135.5 140.5 144 148.5 151.5 156.5 162.5 170.5 180.5
B
[5.216] [5.334] [5.531] [5.669] [5.846] [5.964] [6.161] [6.397] [6.712] [7.106]
C 20 [0.787] 27 [1.063] 36 [1.417]
Inlet D 40 [1.575] 51 [2.007] 62 [2.441]
E M8 M10
c 20 [0.787] 27 [1.063]
Outlet d 40 [1.575] 51 [2.001]
e M8 M10

Model code examples and maximum shaft torque

Flange/drive gear Model code example Maximum shaft torque
02FA SNP3NN/044RN02FAP1CACANNNN/NNNNN 210 N•m [1858 lb•in]
02DA SNP3NN/033RN02DAP1CAC7NNNN/NNNNN 290 N•m [2566 lb•in]
02BA SNP3NN/026LN02BAP1C7C7NNNN/NNNNN 350 N•m [3097 lb•in]

For further details on ordering, see Model Code, pages 8÷11.

50 520L0557 • Rev DB • Jul 2009

 General Gear Pumps and Gear Motors
Technical Information
Group 3

Gear pump dimensions SNP3NN – 03FB and 03BB mm

(continued) This drawing shows the standard porting for 03FB and 03BB. [in]

03BB
60 [2.362] B max

03FB 28.5 [1.122] A ±0.75 [±0.030]

146.5 [5.768] max

65.5 [2.578] max

17.5 [0.689] 28 14.5 [0.571] Distance from front flange
59 [2.323] 114.3 [4.5]
[1.102] to cone reference diameter
50 [1.968] 9 [0.354] Distance from 8 [0.315] 22 [0.866]
front flange X

Ø 25 [0.984]
M16x1.5-6g
to shoulder
B

[ 1.949]
A

49.5

148 [ 5.826] max

181.5 [ 7.145] max

(149.5 [ 5.885])
A

100 [ 3.937]

116 [4.566] max

[0.866 -0.0008 ]

M8 (full thd 18 [0.708] deep)

22.22 ±0.50 [0.875 ±0.020]

B
-0.076 [2.374 -0.003 ]
0

1:8
-0.012

C/c

44.44 ±0.75 [1.75 ±0.030]

Nut and washer supplied with pump
Ø 22 -0.021

Recommended tightening torque: 95-105 Nm

Ø60.3 -0.030
0

A-A 0 0 M10 (full thd 17 [0.669] deep) E/e

5 -0.030 [0.196-0.001 ]
115 ±0.25[4.527 ±0.010]
D/d ±0.25 [±0.010] body width
B-B
0
-0.20 [0.945 -0.008 ]

0
4.79 -0.30 [0.189 -0.012 ] 11.0-11.5 [0.433-0.453]
+0.004

Ø0.75 [0.030] X
24 +0.10

+0.15
13.5 -0.25 [0.532 +0.006
-0.010 ]
P005 080E

SNP3NN – 03FB and 03BB dimensions

Frame size 022 026 033 038 044 048 055 063 075 090
63 64.5 67 68.8 71 72.5 75 78 82 87
A
[2.480] [2.539] [2.637] [2.708] [2.795] [2.854] [2.952] [3.07] [3.228] [3.425]
Dimension
132.5 135.5 140.5 144 148.5 151.5 156.5 162.5 170.5 180.5
B
[5.216] [5.334] [5.531] [5.669] [5.846] [5.964] [6.161] [6.397] [6.712] [7.106]
C 20 [0.787] 27 [1.063] 36 [1.417]
Inlet D 40 [1.575] 51 [2.007] 62 [2.441]
E M8 M10
c 20 [0.787] 27 [1.063]
Outlet d 40 [1.575] 51 [2.001]
e M8 M10

Model code examples and maximum shaft torque

Flange/drive gear Model code example Maximum shaft torque
03FB SNP3NN/044LN03FBP1CACANNNN/NNNNN 300 N•m [2655 lb•in]
03BB SNP3NN/090RN03BBP1CDCANNNN/NNNNN 500 N•m [4425 lb•in]

For further details on ordering, see Model Code, pages 8÷11.

520L0557 • Rev DB • Jul 2009 51

 General Gear Pumps and Gear Motors
Technical Information
Group 3

Gear pump dimensions SNP3NN – 06DD and 06AA mm

(continued) This drawing shows the standard porting for 06DD and 06AA. [in]

06AA
51 [2.007] B max
-0.003 ]
-0.001

06DD 23.5 [0.925] A ±0.75 [±0.03]

-0.036 [4.133

15 [0.590] 25 11 [0.433] 115 ±0.25 [4.527 ±0.010]

40 [1.574] [0.984] body width
Ø105 -0.090

8 [0.314] 22 [0.866]
7 [0.275] Distance from front
Ø 25 [0.984]

flange to shoulder
M16x1.5-6g

(58.5 [2.303])
48 [1.889]
A
o
45

166.5 [ 6.555] max

148 [ 5.826] max
(145 [5.708])
28 [1.102] A

97 [3.818]

(108 [4.251])
[0.874 ±0.020]
22.22 ±0.50

C/c
]
Ø 27.5 -0.130
[1.082 -0.005

1:5
0
0

X
Spline:
B28x25 DIN 5482 E/e M8 (full thd 12 [0.472] deep)
(Profile offset: 0.202 [0.008]) 11.0-11.5 [0.433-0.453]
D/d ±0.25 [0.010]
A-A
Nut and washer supplied with pump 0 0 Ø0.75 [0.030] X 102.0 [4.015]
5 -0.030 [0.196-0.001 ]
Recommended tightening torque: 95-105 Nm
123.5 [4.862] max
13.0 +0.30 +0.010
-0.10 [0.512 -0.004 ]

P005 081E

SNP3NN – 06DD and 06AA dimensions

Frame size 022 026 033 038 044 048 055 063 075 090
63 64.5 67 68.8 71 72.5 75 78 82 87
A
[2.480] [2.539] [2.637] [2.708] [2.795] [2.854] [2.952] [3.07] [3.228] [3.425]
Dimension
132.5 135.5 140.5 144 148.5 151.5 156.5 162.5 170.5 180.5
B
[5.216] [5.334] [5.531] [5.669] [5.846] [5.964] [6.161] [6.397] [6.712] [7.106]
C 27 [1.063] 36 [1.417]
Inlet D 55 [2.165]
E M8
c 18 [0.708] 27 [1.063]
Outlet d 55 [2.165]
e M8

Model code examples and maximum shaft torque

Flange/drive gear Model code example Maximum shaft torque
06DD SNP3NN/044RN06DDP1BBBANNNN/NNNNN 450 N•m [3982 lb•in]
06AA SNP3NN/026LN06AAP1BBBANNNN/NNNNN 300 N•m [2655 lb•in]

For further details on ordering, see Model Code, pages 8÷11.

52 520L0557 • Rev DB • Jul 2009

 General Gear Pumps and Gear Motors
Technical Information
Group 3

Gear pump dimensions SNP3NN, SEP3NN – 07SA, 07GA mm

(continued) This drawing shows the standard porting for 07SA and 07GA. [in]
SEP3NN is available only up to 44cc.

07GA
07SA B max 41.2 [1.622] 176.5 [6.948] max

41.2 [1.622] A ±0.75 [±0.03] 146.05 [5.75]

7.9 [0.311] 33.3 [1.311] 7.9 [0.311] 33.3 [1.311] R 61 [2.402] max

25.0 [0.984]
±0.25 [0.010]

13.5 [0.531] 9.5 [0.374]

A
E/e

Ø 101.6 -0.05
0

[4.0 -0.002 ]

157 [ 6.181] max

0
[0.858 -0.005 ]

14.15-14.75 [0.557-0.580]
A

Ø 22.225 -0.025
0

[0.874 ±0.020]
]

22.22 ±0.50
[0.875 -0.001
0

0
Ø21.806 -0.127

0 0
C/c
0

-1.5 [0.059]

X
F/f (full thd 20 [0.787] deep) 115 ±0.25 [4.527 ±0.010]
Splined: body width
D/d ±0.25 [0.010]

Ø0.75 [0.030] X
SAE J498-13T-16/32DP
Flat root side fit
(circular tooth thickness
0.127 mm [0.005] less than
A-A
0 0
standard class 1 fit) 6.375-0.025 [0.250-0.001]

24.76-25.07 [0.974-0.987] P005 082E

SNP3NN, SEP3NN – 07SA and 07GA dimensions

Frame size 022 026 033 038 044 048 055 063 075 090
63 64.5 67 68.8 71 72.5 75 78 82 87
A
[2.480] [2.539] [2.637] [2.708] [2.795] [2.854] [2.952] [3.07] [3.228] [3.425]
Dimension
132.5 135.5 140.5 144 148.5 151.5 156.5 162.5 170.5 180.5
B
[5.216] [5.334] [5.531] [5.669] [5.846] [5.964] [6.161] [6.397] [6.712] [7.106]
C 25.4 [1] 31.8 [1.251] 38.1 [1.5]
D 26.19 [1.031] 30.18 [1.188] 35.71 [1.405]
Inlet
E 52.37 [2.061] 58.72 [2.311] 69.85 [2.75]
F 3/8–16UNC–2B 7/16–14UNC–2B ½–13UNC–2B
c 19.1 [0.751] 25.4 [1.0] 31.8 [1.251]
d 22.23 [0.875] 26.19 [1.031] 30.18 [1.188]
Outlet
e 47.63 [1.875] 52.37 [2.061] 58.72 [2.311]
f 3/8–16UNC–2B 3/8–16UNC–2B 7/16–14UNC–2B

Model code examples and maximum shaft torque

Flange/drive gear Model code example Maximum shaft torque
07SA SNP3NN/063LN07SAP1A5A4NNNN/NNNNN 270 N•m [2389 lb•in]
07GA SNP3NN/026LN07GAP1A3A2NNNN/NNNNN 230 N•m [2035 lb•in]
For further details on ordering, see Model Code, pages 8÷11.

520L0557 • Rev DB • Jul 2009 53

 General Gear Pumps and Gear Motors
Technical Information
Group 3

Gear motor dimensions SNM3NN – 01FA, 01DA and 01BA mm

This drawing shows the standard porting for 01FA, 01DA and 01BA. [in]

01BA
46.5 [1.83] B max
20 [0.787] A ±0.75 [±0.03]
01FA 01DA
14.5 [0.571] 24 8 [0.314]

(54.3 [2.137])
[0.944] 115 ±0.25 [4.527 ±0.010]

42.9 [1.689]
46 [1.118] 34 [1.338]

-0.076
Ø 50.8 -0.030
5 [0.196] 22 [0.866]

-0.003 ]

Ø 22 [0.866]
[2.0 -0.001
40 [1.574] 6 [0.236] Distance from 5 [0.196] Distance from

M14x1.5-6g
front flange front flange
to shoulder to shoulder
A B

150.5 [5.925] max

148 [ 5.826] max
(128.1 [5.043])
A

85.2 [3.354]

(96.2 [3.787])
B
]
Ø 21.5 -0.130
[0.846 -0.005
[0.787-0.0008 ]

24 [0.944]
[0.874 ±0.020]
0

M8 (full thd 18 [0.708] deep)

0

X
22.22 ±0.50
0

44.44 ±0.75 [1.749 ±0.03]

1:8

Spline:
Ø 20 -0.021

A-A
0

B22x19 DIN 5482 C/c

0 0
5 -0.030 [0.196-0.001 ] (Profile offset -0.10 [0.024])
M14x1.5-6H
M8 (full thd 12 [0.472] deep) E/e Drain port
M10 (full thd 17 [0.669] deep)
Nut and washer supplied with pump < 40: ±0.20 [0.008] D/d 11.0-11.5 [0.433-0.453]
-0.20 [0.866 -0.008 ]

Recommended tightening torque: 75-85 Nm

+0.004

> 40: ±0.25 [0.010]

Ø0.75 [0.030] X
98.4 [3.874]
motor
B-B
0 0 121.5 [4.783] max
4 -0.030 [0.158 -0.001]
22 +0.10

11.5 +0.30 +0.010

-0.10 [0.453 -0.004 ]
P005 083E

SNM3NN – 01FA, 01DA and 01BA dimensions

Frame size 022 026 033 038 044 048 055 063 075 090
63 64.5 67 68.8 71 72.5 75 78 82 87
A
[2.48] [2.539] [2.637] [2.708 [2.795] [2.854] [2.952] [3.07] [3.228] [3.425]
Dimension
132.5 135.5 140.5 144 148.5 151.5 156.5 162.5 170.5 180.5
B
[5.216] [5.334] [5.531] [5.669] [5.846] [5.964] [6.161] [6.397] [6.712] [7.106]
C/c 20 [0.787] 27 [1.063]
Inlet/Outlet D/d 40 [1.575] 51 [2.007]
E/e M8 M10

Model code examples and maximum shaft torque

Flange/drive gear Model code example Maximum shaft torque
01FA SNM3NN/075BN01FAM1CACANNNN/NNNNN 210 N•m [1858 lb•in]
01DA SNM3NN/026BN01DAM1C7C7NNNN/NNNNN 290 N•m [2566 lb•in]
01BA SNM3NN/044BN01BAM1CACANNNN/NNNNN 350 N•m [3097 lb•in]

For further details on ordering, see Model Code, pages 8÷11.

54 520L0557 • Rev DB • Jul 2009

 General Gear Pumps and Gear Motors
Technical Information
Group 3

Gear motor dimensions SNM3NN – 02FA, 02DA and 02BA mm

(continued) This drawing shows the standard porting for 02FA, 02DA and 02BA. [in]

02FA 02DA 02BA

46.5 [1.83] B max
20 [0.787] A ±0.75 [±0.03]
14.5 [0.571] 24 8 [0.314]

58 [2.28] max
[0.944]
46 [1.118] 34 [1.338] 124.5 [4.9] max

-0.076
Ø 50.8 -0.030
5 [0.196] 22 [0.866]

45 [1.77]
-0.003 ]
98.4 [3.87]

Ø 22 [0.866]
[2.0 -0.001
40 [1.574] 6 [0.236] Distance from 5 [0.196] Distance from

M14x1.5-6g
front flange front flange
to shoulder to shoulder
A B

148 [ 5.826] max

163 [6.42] max

(137 [5.39])
A B

105 [4.13] max

]
Ø 21.5 -0.130
[0.846 -0.005

92 [3.62]
[0.787-0.0008 ]

24 [0.944]
0

M8 (full thd 18 [0.708] deep) X

0

[0.874 ±0.02]
22.22 ±0.50

44.44 ±0.75 [1.749 ±0.03]

0

1:8

Spline:
Ø 20 -0.021

A-A
0

B22x19 DIN 5482 C/c

0 0
5 -0.030 [0.196-0.001 ] (Profile offset -0.10 [0.024]) M14x1.5-6H
M8 (full thd 12 [0.472] deep) E/e Drain port
M10 (full thd 17 [0.669] deep)
Nut and washer supplied with pump
Recommended tightening torque: 75-85 Nm < 40: ±0.20 [0.008] D/d
115 ±0.25 [4.527 ±0.010]
-0.20 [0.866 -0.008 ]
+0.004

motor > 40: ±0.25 [0.010]

B-B body width
0 0
4 -0.030 [0.158 -0.001]
11.0-11.5 [0.433-0.453]
Ø0.75 [0.030] X
22 +0.10

11.5 +0.30 +0.010

-0.10 [0.453 -0.004 ]

P005 084E

SNM3NN – 02FA, 02DA and 02BA dimensions

Frame size 022 026 033 038 044 048 055 063 075 090
63 64.5 67 68.8 71 72.5 75 78 82 87
A
[2.48] [2.539] [2.637] [2.708 [2.795] [2.854] [2.952] [3.07] [3.228] [3.425]
Dimension
132.5 135.5 140.5 144 148.5 151.5 156.5 162.5 170.5 180.5
B
[5.216] [5.334] [5.531] [5.669] [5.846] [5.964] [6.161] [6.397] [6.712] [7.106]
C/c 20 [0.787] 27 [1.063]
Inlet/Outlet D/d 40 [1.575] 51 [2.007]
E/e M8 M10

Model code examples and maximum shaft torque

Flange/drive gear Model code example Maximum shaft torque
02FA SNM3NN/044BN02FAM1CACANNNN/NNNNN 210 N•m [1858 lb•in]
02DA SNM3NN/033BN02DAM1CACANNNN/NNNNN 290 N•m [2566 lb•in]
02BA SNM3NN/026BN02BAM1C7C7NNNN/NNNNN 350 N•m [3097 lb•in]

For further details on ordering, see Model Code, pages 8÷11.

520L0557 • Rev DB • Jul 2009 55

 General Gear Pumps and Gear Motors
Technical Information
Group 3

Gear motor dimensions SNM3NN – 03FB and 03BB mm

(continued) This drawing shows the standard porting for 03FB and 03BB. [in]

03BB

60 [2.362] B max

03FB
28.5 [1.122] A ±0.75 [±0.030]
146.5 [5.768] max

65.5 [2.578] max

17.5 [0.689] 28 14.5 [0.571] Distance from front flange
to cone reference diameter 114.3 [4.5]
[1.102]
59 [2.323]
8 [0.315] 22 [0.866]
50 [1.968] 9 [0.354] Distance from X
Ø 25 [0.984]
M16x1.5-6g

front flange
to shoulder B

[ 1.949]
A

49.5

148 [ 5.826] max

181.5 [ 7.145] max

(149.5 [ 5.885])
A

100 [ 3.937]

116 [4.566] max

[0.866 -0.0008 ]

M8 (full thd 18 [0.708] deep)

22.22 ±0.50 [0.875 ±0.020]

B
-0.076 [2.374 -0.003 ]
0

1:8
-0.012

C/c

44.44 ±0.75 [1.749 ±0.03]

Ø 22 -0.021

Torque for nut: 95-105 Nm

Ø60.3 -0.030
0

A-A
0
5 -0.030 0
[0.196-0.001 ]
M10 (full thd 17 [0.669] deep) E/e
M14x1.5-6H
D/d ±0.25 [±0.010] Drain port
B-B 115 ±0.25[4.527 ±0.010]
0 0
4.79 -0.30 [0.189 -0.012 ] body width
-0.20 [0.945 -0.008 ]
+0.004

11.0-11.5 [0.433-0.453]
Ø0.75 [0.030] X
24 +0.10

+0.15
13.5 -0.25 [0.532 +0.006
-0.010 ]
P005 085E

SNM3NN – 03FB and 03BB dimensions

Frame size 022 026 033 038 044 048 055 063 075 090
63 64.5 67 68.8 71 72.5 75 78 82 87
A
[2.48] [2.539] [2.637] [2.708 [2.795] [2.854] [2.952] [3.07] [3.228] [3.425]
Dimension
132.5 135.5 140.5 144 148.5 151.5 156.5 162.5 170.5 180.5
B
[5.216] [5.334] [5.531] [5.669] [5.846] [5.964] [6.161] [6.397] [6.712] [7.106]
C/c 20 [0.787] 27 [1.063]
Inlet/Outlet D/d 40 [1.575] 51 [2.007]
E/e M8 M10

Model code examples and maximum shaft torque

Flange/drive gear Model code example Maximum shaft torque
03FB SNM3NN/063BN03FBM1CACANNNN/NNNNN 300 N•m [2655 lb•in]
03BB SNM3NN/090BN03BBM1CACANNNN/NNNNN 500 N•m [4425 lb•in]

For further details on ordering, see Model Code, pages 8÷11.

56 520L0557 • Rev DB • Jul 2009

 General Gear Pumps and Gear Motors
Technical Information
Group 3

Gear motor dimensions SNM3NN – 06DD and 06AA mm

(continued) This drawing shows the standard porting for 06DD AND 06AA. [in]

06AA
51 [2.007] B max
06DD -0.003 ]
-0.001

23.5 [0.925] A ±0.75 [±0.03]

58.5 [2.303] max

-0.036 [4.133

15 [0.590] 25 11 [0.433] 115 ±0.25 [4.527 ±0.010]

40 [1.574] [0.984] body width
Ø105 -0.090

8 [0.314] 22 [0.866]
7 [0.275] Distance from front
Ø 25 [0.984]

flange to shoulder
M16x1.5-6g

48 [1.889]
A
o
45

166.5 [ 6.555] max

148 [ 5.826] max
(145 [5.708])

108 [4.251] max

28 [1.102] A

97 [3.818]
[0.874 ±0.020]
22.22 ±0.50

44.44 ±0.75 [1.749 ±0.03]

C/c
]
Ø 27.5 -0.130
[1.082 -0.005

1:5
0
0

X
Spline:
B28x25 DIN 5482 M8 (full thd 12 [0.472] deep) E/e M14x1.5-6H
(Profile offset: 0.202 [0.008])
D/d ±0.25 [0.010] Drain port

Torque for nut: 95-105 Nm 11.0-11.5 [0.433-0.453]

A-A Ø0.75 [0.030] X
0 0
5 -0.030 [0.196-0.001 ] 102.0 [4.015]

+0.30
13.0 -0.10 [0.512 +0.010
-0.004 ] 123.5 [4.862] max
P005 086E

SNM3NN – 06DD AND 06AA dimensions

Frame size 022 026 033 038 044 048 055 063 075 090
63 64.5 67 68.8 71 72.5 75 78 82 87
A
[2.48] [2.539] [2.637] [2.708 [2.795] [2.854] [2.952] [3.07] [3.228] [3.425]
Dimension
132.5 135.5 140.5 144 148.5 151.5 156.5 162.5 170.5 180.5
B
[5.216] [5.334] [5.531] [5.669] [5.846] [5.964] [6.161] [6.397] [6.712] [7.106]
C/c 18 [0.709] 27 [1.063] 36 [1.417]
Inlet/Outlet D/d 55 [2.165]
E/e M8

Model code examples and maximum shaft torque

Flange/drive gear Model code example Maximum shaft torque
06DD SNM3NN/044BN06DDM1BBBBNNNN/NNNNN 300 N•m [2655 lb•in]
06AA SNM3NN/022BN06AAM1BABANNNN/NNNNN 450 N•m [3982 lb•in]

For further details on ordering, see Model Code, pages 8÷11.

520L0557 • Rev DB • Jul 2009 57

 General Gear Pumps and Gear Motors
Technical Information
Group 3

Gear motor dimensions SNM3NN – 07BC, 07SA and 07GA mm

(continued) This drawing shows the standard porting for 07BC, 07SA and 07GA. [in]

07BC 07SA 07GA

B max 41.2 [7.622] 176.5 [6.948] max

59.4 [2.338]
41.2 [7.622] A ±0.75 [±0.03] 146.05 [5.75]
42.9 [1.689]
7.9 [0.311] 33.3 [1.311] 7.9 [0.311] 33.3 [1.311] R 61 [2.402] max
7.9 [0.311] 28.4 [1.118]
Distance from
Distance from front flange 25.0 [0.984] 13.5 [0.531] 9.5 [0.374]
23.1 [0.909]

±0.25 [0.010]
front flange to shoulder
to shoulder
B Ø 4 ±0.1[0.157 ±0.004] A
E/e

Ø 101.6 -0.05
0

157 [ 6.181] max

[4.0 -0.002
0
]
14.15-14.75 [0.557-0.580]
5/8-18UNF-2A

Cone reference diameter

[0.858 -0.005 ]

B A

Ø 22.225 -0.025

22.22 ±0.50 [0.874 ±0.020]

]
0

[0.875 -0.001
0

44.44 ±0.75 [1.749 ±0.03]

1:8

0
Ø 22.225 [0.875]

0 0
Ø21.806 -0.127

C/c -1.5 [0.059]

0

6.35-5.25 [0.25-0.206]
X
F/f (full thd 20 [0.787] deep)
Splined:

X
SAE J498-13T-16/32DP D/d ±0.25 [0.01]

Ø0.75 [0.03]
B-B Flat root side fit 9/16-18UNF-2B
(circular tooth thickness Drain port
0 0
6.375-0.025 [0.250-0.001] 0.127 [0.005] less than
standard class 1 fit) 115 ±0.25 [4.527 ±0.01]
A-A
body width
0 0
6.375-0.025 [0.250-0.001]

3.33-3.07 [0.131-0.12]

24.76-25.07 [0.974-0.987]
P005 087E

SNM3NN – 07BC, 07SA and 07GA dimensions

Frame size 022 026 033 038 044 048 055 063 075 090
63 64.5 67 68.8 71 72.5 75 78 82 87
A
[2.48] [2.539] [2.637] [2.708 [2.795] [2.854] [2.952] [3.07] [3.228] [3.425]
Dimension
132.5 135.5 140.5 144 148.5 151.5 156.5 162.5 170.5 180.5
B
[5.216] [5.334] [5.531] [5.669] [5.846] [5.964] [6.161] [6.397] [6.712] [7.106]
C/c 25.4 [1] 31.8 [1.251]
D/d 26.19 [1.031] 30.18 [1.188]
Inlet/Outlet
E/e 52.37 [2.061] 58.72 [2.311]
F/f 3/8–16UNC–2B 7/16–14UNC–2B

Model code examples and maximum shaft torque

Flange/drive gear Model code example Maximum shaft torque
07BC SNM3NN/026BN07BCM6A3A3NNNN/NNNNN 300 N•m [2655 lb•in]
07SA SNM3NN/063BN07SAM6A4A4NNNN/NNNNN 270 N•m [2389 lb•in]
07GA SNM3NN/090BN07GAM6A4A4NNNN/NNNNN 230 N•m [2035 lb•in]

For further details on ordering, see Model Code, pages 8÷11.

58 520L0557 • Rev DB • Jul 2009

 General Gear Pumps and Gear Motors
Technical Information
Group 3

Group 3 pump ports Available pump ports for Group 3

A B C E F

45o

a x e f
h
b y g i (4 holes min. full thd.
c (4 holes min. full thd. z (4 holes min. full thd. 12 [0.472] deep)
20 [0.787] deep) 12 [0.472] deep)

Group 3 pump ports dimensions

Port type A B C E F
Main dimensions a b d c x y z g h i e f
25.4 26.19 52.37 27 55 40 20
Inlet / –16UNC–2B
3 8 M8 M8 1 5/16–12UN–2B ¾ Gas (BSPP)
[1] [1.031] [2.062] [1.063] [2.165] [1.575] [0.787]
022
18.5 22.23 47.63 18 55 40 20
Outlet / –16UNC–2B
3 8 M8 M8 1 1/16–12UN–2B ¾ Gas (BSPP)
[0.728] [0.875] [1.875] [0.709] [2.165] [1.575] [0.787]
25.4 26.19 52.37 27 55 40 20
Inlet / –16UNC–2B
3 8 M8 M8 1 5/16–12UN–2B ¾ Gas (BSPP)
[1] [1.031] [2.062] [1.063] [2.165] [1.575] [0.787]
026
18.5 22.23 47.63 18 55 40 20
Outlet / –16UNC–2B
3 8 M8 M8 1 1/16–12UN–2B ¾ Gas (BSPP)
[0.728] [0.875] [1.875] [0.709] [2.165] [1.575] [0.787]
31.8 30.18 58.72 27 55 51 27
Inlet / –14UNC–2B
7 16 M8 M10 1 5/8– 12UN–2B 1 Gas (BSPP)
[1.252] [1.188] [2.312] [1.063] [2.165] [2.008] [1.063]
033
25.4 26.19 52.37 18 55 40 20
Outlet / –16UNC–2B
3 8 M8 M8 1 5/16–12UN–2B ¾ Gas (BSPP)
[1] [1.031] [2.062] [0.709] [2.165] [1.575] [0.787]
31.8 30.18 58.72 27 55 51 27
Inlet / –14UNC–2B
7 16 M8 M10 1 5/8–12UN–2B 1 Gas (BSPP)
[1.252] [1.188] [2.312] [1.063] [2.165] [2.008] [1.063]
038
25.4 26.19 52.37 18 55 40 20
Outlet / –16UNC–2B
3 8 M8 M8 1 5/16–12UN–2B ¾ Gas (BSPP)
[1] [1.031] [2.062] [0.709] [2.165] [1.575] [0.787]
31.8 30.18 58.72 27 55 51 27
Inlet / –14UNC–2B
7 16 M8 M10 1 5/8–12UN–2B 1 Gas (BSPP)
[1.252] [1.188] [2.312] [1.063] [2.165] [2.008] [1.063]
044
25.4 26.19 52.37 18 55 51 27
Frame size

Outlet / –16UNC–2B
3 8 M8 M10 1 5/16–12UN–2B 1 Gas (BSPP)
[1] [1.031] [2.062] [0.709] [2.165] [2.008] [1.063]
31.8 30.18 58.72 27 55 51 27
Inlet / –14UNC–2B
7 16 M8 M10 1 5/8–12UN–2B 1 Gas (BSPP)
[1.252] [1.188] [2.312] [1.063] [2.165] [2.008] [1.063]
048
25.4 26.19 52.37 18 55 51 27
Outlet / –16UNC–2B
3 8 M8 M10 1 5/16–12UN–2B 1 Gas (BSPP)
[1] [1.031] [2.062] [0.709] [2.165] [2.008] [1.063]
37.5 35.71 69.85 27 55 51 27
Inlet ½–13UNC–2B M8 M10 1 7/8–12UN–2B 1 Gas (BSPP)
[1.476] [1.406] [2.750] [1.063] [2.165] [2.008] [1.063]
055
31.8 30.18 58.72 18 55 51 27
Outlet / –14UNC–2B
7 16 M8 M10 1 5/8–12UN–2B 1 Gas (BSPP)
[1.252] [1.188] [2.312] [0.709] [2.165] [2.008] [1.063]
37.5 35.71 69.85 36 55 62 36 1¼ Gas
Inlet ½–13UNC–2B M8 M10 1 7/8–12UN–2B
[1.476] [1.406] [2.750] [1.417] [2.165] [2.441] [1.417] (BSPP)
063
31.8 30.18 58.72 27 55 51 27
Outlet / –14UNC–2B
7 16 M8 M10 1 5/8–12UN–2B 1 Gas (BSPP)
[1.252] [1.188] [2.312] [1.063] [2.165] [2.008] [1.063]
37.5 35.71 69.85 36 55 62 36 1¼ Gas
Inlet ½–13UNC–2B M8 M10 1 7/8–12UN–2B
[1.476] [1.406] [2.750] [1.417] [2.165] [2.441] [1.417] (BSPP)
075
31.8 30.18 58.72 27 55 51 27
Outlet / –14UNC–2B
7 16 M8 M10 1 5/8–12UN–2B 1 Gas (BSPP)
[1.252] [1.188] [2.312] [1.063] [2.165] [2.008] [1.063]
37.5 35.71 69.85 36 55 62 36 1¼ Gas
Inlet ½–13UNC–2B M8 M10 1 7/8–12UN–2B
[1.476] [1.406] [2.750] [1.417] [2.165] [2.441] [1.417] (BSPP)
090
31.8 30.18 58.72 27 55 51 27
Outlet / –14UNC–2B
7 16 M8 M10 1 5/8–12UN–2B 1 Gas (BSPP)
[1.252] [1.188] [2.312] [1.063] [2.165] [2.008] [1.063]

520L0557 • Rev DB • Jul 2009 59

 General Gear Pumps and Gear Motors
Technical Information
Group 3

Group 3 motor ports Available motor ports for Group 3

A B C E F

45o
d

a x e f
h
b y g i (4 holes min. full thd.
c (4 holes min. full thd. z (4 holes min. full thd. 12 [0.472] deep)
20 [0.787] deep) 12 [0.472] deep)

Group 3 motor ports dimensions

Port type A B C E F
Main dimensions a b d c x y z g h i e f
Inlet/ 25.4 26.19 52.37 18 55 40 20
022 ³⁄8–16UNC–2B M8 M8 15⁄16–12UN–2B ¾ Gas (BSPP)
Outlet [1.0] [1.031] [2.061] [0.709] [2.165] [1.575] [0.787]
Inlet/ 25.4 26.19 52.37 18 55 40 20
026 ³⁄8–16UNC–2B M8 M8 15⁄16–12UN–2B ¾ Gas (BSPP)
Outlet [1.0] [1.031] [2.061] [0.709] [2.165] [1.575] [0.787]
Inlet/ 31.8 30.18 58.72 27 55 51 27
033 7⁄16–14UNC–2B M8 M10 15⁄8– 12UN–2B 1 Gas (BSPP)
Outlet [1.251] [1.188] [2.311] [1.063] [2.165] [2.008] [1.063]
Inlet/ 31.8 30.18 58.72 27 55 51 27
038 7⁄16–14UNC–2B M8 M10 15⁄8– 12UN–2B 1 Gas (BSPP)
Outlet [1.251] [1.188] [2.311] [1.063] [2.165] [2.008] [1.063]
Inlet/ 31.8 30.18 58.72 27 55 51 27
Frame size

044 7⁄16–14UNC–2B M8 M10 15⁄8– 12UN–2B 1 Gas (BSPP)

Outlet [1.251] [1.188] [2.311] [1.063] [2.165] [2.008] [1.063]
Inlet/ 31.8 30.18 58.72 27 55 51 27
048 7⁄16–14UNC–2B M8 M10 15⁄8– 12UN–2B 1 Gas (BSPP)
Outlet [1.251] [1.188] [2.311] [1.063] [2.165] [2.008] [1.063]
Inlet/ 31.8 30.18 58.72 27 55 51 27
055 7⁄16–14UNC–2B M8 M10 15⁄8– 12UN–2B 1 Gas (BSPP)
Outlet [1.251] [1.188] [2.311] [1.063] [2.165] [2.008] [1.063]
Inlet/ 31.8 30.18 58.72 36 55 51 27
063 7⁄16–14UNC–2B M8 M10 15⁄8– 12UN–2B 1¼ Gas (BSPP)
Outlet [1.251] [1.188] [2.311] [1.417] [2.165] [2.008] [1.063]
Inlet/ 31.8 30.18 58.72 36 55 51 27
075 7⁄16–14UNC–2B M8 M10 15⁄8– 12UN–2B 1¼ Gas (BSPP)
Outlet [1.251] [1.188] [2.311] [1.417] [2.165] [2.008] [1.063]
Inlet/ 31.8 30.18 58.72 36 55 51 27
090 7⁄16–14UNC–2B M8 M10 15⁄8– 12UN–2B 1¼ Gas (BSPP)
Outlet [1.251] [1.188] [2.311] [1.417] [2.165] [2.008] [1.063]
Drain M14 x 1.5 9⁄16–18UNF–2B M14 x 1.5 9⁄16–18UNF–2B

60 520L0557 • Rev DB • Jul 2009

 General Gear Pumps and Gear Motors
Technical Information
Group 3

Shaft and flange Shaft and flange availability and torque capability
availability This table details the standard Group 3 shafts and flange combinations that are currently
available with the maximum shaft torque limits. For further information, please see
Sauer-Danfoss publications Group 3 Gear Pumps Technical Information, 520L0569 and
Group 1, 2 and 3 Gear Motors, Technical Information, 520L0568.

Shaft and flange availability and torque capability

Shaft Mounting flange code with maximum torque in Nm [lb•in]
Description Code 01 02 03 06 07
Taper 1:5 AA – – – 300 [2655] –
Taper 1:8 BA 350 [3097] 350 [3097] – – –
Taper 1:8 BB – – 500 [4425] – –
Taper 1:8 BC – – – – 300 [2655]
Spline 13T DIN 5482-B22X19 DA 290 [2566] 290 [2566] – – –
Spline 15T DIN 5482-B28X25 DD – – – 450 [3982] –
SAE spline 13T 16/32p SA – – – – 270 [2389]
Parallel ø20 mm FA 210 [1858] 210 [1858] –
Parallel ø22.225 mm FB 300 [2655] –
Parallel ø22.225 mm GA – 230 [2035]

520L0557 • Rev DB • Jul 2009 61

 General Gear Pumps and Gear Motors
Technical Information
Multi-Stage Pumps

Overview Sauer-Danfoss multi-stage pumps can be combined of group 1, 2, and 3. In addition

to the standard range (presented in the following), first stage can be supplied with a
splined, a tapered or a parallel shaft. Also versions with suction connection and other
hydraulic connections and flange assembly or centralized threads are available.

The representatives of Sauer-Danfoss multi-stage pumps are shown below:

Tandem pump PTT conf. 06SM

F005 011

Tandem pump PNT conf. 01BQ (cut-away)

F005 068

Triple pump PFRN conf. 31BD

F005 069

62 520L0557 • Rev DB • Jul 2009

 General Gear Pumps and Gear Motors
Technical Information
Multi-Stage Pumps

Multi-stage pump model code Example: PRRNN-022/022/ ...

A B C D E F G * ** H I J K L M N O P R S T U V W
P R R N N–0 2 2 / 0 2 2 / 0 1 7 / 4 , 0 L 0 0 7 S L P 3 B B B A N N B B B A N N N N/N N N N N

B 7 B 5 N N

A Product = Pump * 3 stage group (optional)

rd
B 6 B 5 N N
B 1st stage group B7 = Inlet
C 2nd stage group B5 = Outlet ** 4th stage group (optional)
D 3rd stage group NN = Ports Position B6 = Inlet
E 4th stage group B5 = Outlet
Code Stage group NN = Ports Position
T Gr. 1 - series N
J Mounting flange and gear shaft –
Y Gr. 1 - series K
Group 2 as the first stage
N Gr. 2 - series N
Code Description
L Gr. 2 - series K
01BQ European 4 bolt flange/Tapered shaft 1:8
R Gr. 3 - series N
02AG German 4 bolt PTO flange/1:5 taper shaft
F Gr. 4 - series TA
04AG German 2 bolt PTO flange (Deutz)/1:5 taper shaft
05AG German 2 bolt PTO flange (Deutz)/1:5 taper shaft
F Displacement of the 1st stage pump
09BY Perkins 4.236 timing case flange/1:8 taper shaft
G Displacement of the 2nd stage pump
* Displacement of the 3rd stage pump (optional) 06GE SAE „A“ flange/15.875mm [0.625 in] parallel shaft

** Displacement of the 4th stage pump (optional) 01DM European 4-bolt flange/DIN splined shaft 9T
02DO German 4-bolt PTO flange/DIN splined shaft 9T
H Direction of rotation 04DO German 2-bolt PTO flange (Deutz)/DIN splined shaft 9T
Code Description 05DO German 2-bolt PTO flange (Deutz)/DIN splined shaft 9T
R Right (clockwise) 06SM SAE A flange/SAE splined shaft 9T
L Left (counterclockwise) 06SS SAE A flange/SAE splined shaft 11T

I Version J Mounting flange and gear shaft –

Code Description Group 3 as the first stage
N Standard (w/o interm.flange) Code Description
0 Interm. flange btw different group stages 01BL European 01 4-bolt flange/Tapered shaft 1:8
1 Interm. flange all stages 02BL European 02 4-bolt flange/Tapered shaft 1:8
2 SAE intem. flange btw different group stages 03BM European 03 4-bolt flange/Tapered shaft 1:8
S SAE intem. flange all stages 06AG German 4-bolt flange/1:5 Tapered shaft
07GD SAE B flange/Parallel shaft 22.225 mm [0.875 in]

J Mounting flange and gear shaft – 01DL European 01 4-bolt flange/DIN splined shaft 13T

Group 1 as the first stage 06DO German 4-bolt flange/SAE splined shaft 15T

Code Description 07SL SAE B flange/SAE splined shaft 13T

01BT European 4 bolt flange/Tapered shaft 1:8

01DM European 4 bolt flange/DIN splined shaft 15T J Mounting flange and gear shaft –
Group 4 as the first stage
For further information about options of single Code Description
units, see pages 8÷11 of the catalogue. 31BD European 4-bolt flange/Tapered shaft 1:8
02RD SAE C 2-bolt flange/SAE splined shaft 14T

520L0557 • Rev DB • Jul 2009 63

 General Gear Pumps and Gear Motors
Technical Information
Multi-Stage Pumps

Multi-stage pump model code (continued) Example: PRRNN-022/022/ ...

A B C D E F G * ** H I J K L M N O P R S T U V W
P R R N N–0 2 2 / 0 2 2 / 0 1 7 / 4 , 0 L 0 0 7 S L P 3 B B B A N N B B B A N N N N/N N N N N

B 7 B 5 N N

* 3 stage group (optional)

rd

B7 = Inlet B 6 B 5 N N
B5 = Outlet
NN = Ports Position ** 4th stage group (optional)
B6 = Inlet
B5 = Outlet
NN = Ports Position
K Rear cover
L/M Inlet/Outlet of the 1st stage pump
N Ports position of the 1st stage pump
O/P Inlet/Outlet of the 2nd stage pump
R Ports position of the 2nd stage pump
* Inlet/Outlet of the 3rd stage pump, ports position of the 3rd stage pump
** Inlet/Outlet of the 4th stage pump; ports position of the 4th stage pump
S Seals
Code Description
N Buna seals

T Screws
Code Description
N Standard screws

U Set RV
Code Description
NNN No Valve
V** Integr. RV valve

V Mark
Code Description
N Standard Mark

W Mark position
Code Description
N Standard position

For further information about options of single gear units, see pages 8÷11 of the
catalogue.

64 520L0557 • Rev DB • Jul 2009

 General Gear Pumps and Gear Motors
Technical Information
Multi-Stage Pumps

Multi-stage pump model Market codes for composition of multi-stage pumps

code (continued)

Family Vers. Front stage Kit Middle stage Kit Middle stage Kit Rear stage
Flange + shaft type Flange + shaft type Flange + shaft type Flange + shaft
PTT 1 SNW1NN/.....01BT.. HU – – – – SNP1NN/.....01DA..
PTT N SNW1NN/.....01BT.. HT – – – – SNQ1NN/.....11DE
PNT N SNW2NN/.....01BQ.. HN – – – – SNQ1NN/.....21DE
PNT 1 SNW2NN/.....01BQ.. CC – – – – SNP1NN/.....01DA
PNN N SNW2NN/.....01BQ.. – – – – – SNP2NN/.....03CA
PLN N SKW2NN/.....01BQ.. – – – – – SNP2NN/.....03CA
PRT N SNW3NN/.....01BL.. HR – – – – SNQ1NN/.....31DE
PRT 1 SNW3NN/.....01BL.. Q – – – – SNP1NN/.....01DA..
PRN 1 SNW3NN/.....01BL.. H – – – – SNP2NN/.....01DA..
PRR N SNW3NN/.....01BL.. G – – – – SNQ3NN/.....11DB..
PFN 1 TAW4NN/.....31BD.. S – – – – SNP2NN/.....01DA..
PFR 1 TAW4NN/.....31BD.. E – – – – SNQ3NN/.....11DB..
PFF N TAW4NN/.....31BD.. F – – – – TAQ4NN/.....31DB..
PTTT N SNW1NN/.....01BT.. HT SNO1NN/.....11BP.. HT – – SNQ1NN/.....11DE..
PTTT 1 SNW1NN/.....01BT.. HU SNW1NN/.....01DM.. HU – – SNP1NN/.....01DA..
PNTT N SNW2NN/.....01BQ.. HN SNO1NN/.....21DP.. HT – – SNQ1NN/.....11DE..
PNTT 1 SNW2NN/.....01BQ.. CC SNW1NN/.....01DM.. HU – – SNP1NN/.....01DA..
PNNT 0 SNW2NN/.....01BQ.. – SNO2NN/.....03CH.. CC – – SNP1NN/.....01DA..
PNNN N SNW2NN/.....01BQ.. – SNO2NN/.....03CH.. – – – SNP2NN/.....01CA..
PRNT 1 SNW3NN/.....01BL.. H SNW2NN/.....01DM.. CC – – SNP1NN/.....01DA..
PRNN 0 SNW3NN/.....01BL.. H SNW2NN/.....01DM.. – – – SNP2NN/.....03CA..
PRRT 0 SNW3NN/.....01BL.. G SNO3NN/.....11DM.. Q – – SNP1NN/.....01DA..
PRRN 0 SNW3NN/.....01BL.. G SNO3NN/.....11DM.. H – – SNP2NN/.....03CA..
PRRR N SNW3NN/.....01BL.. G SNO3NN/.....11DM.. G – – SNQ3NN/.....11DB..
PFNN 0 TAW4NN/.....31BD.. S SNW2NN/.....01DM.. – – – SNP2NN/.....03CA..
PFRN 1 TAW4NN/.....31BD.. E SNO3NN/.....11DM.. H – – SNP2NN/.....01DA..
PFRR 0 TAW4NN/.....31BD.. E SNO3NN/.....11DM.. G – – SNQ3NN/.....11DB..
PFFR 0 TAW4NN/.....31BD.. F TAO4NN/.....31DE.. E – – SNQ3NN/.....11DB..
PNNNT 0 SNW2NN/.....01BQ.. – SNO2NN/.....03CH.. – SNO2NN/.....03CH.. V SNP1NN/.....01DA..
PNNNN N SNW2NN/.....01BQ.. – SNO2NN/.....03CH.. – SNO2NN/.....03CH.. – SNP2NN/.....03CA..
PRNTT 1 SNW3NN/.....01BL.. H SNW2NN/.....01DM.. CC SNW1NN/.....01DM.. HU SNP1NN/.....01DA..
PRNNN 0 SNW3NN/.....01BL.. H SNW2NN/.....01DM.. – SNO2NN/.....03CH.. – SNP2NN/.....03CA..
PRRNN 0 SNW3NN/.....01BL.. G SNO3NN/.....11DM.. H SNW2NN/.....01DM.. – SNP2NN/.....03CA..
PRRRN 0 SNW3NN/.....01BL.. G SNO3NN/.....11DM.. G SNO3NN/.....11DM.. HU SNP2NN/.....03CA..
PRRRR N SNW3NN/.....01BL.. G SNO3NN/.....11DM.. G SNO3NN/.....11DM.. G SNQ3NN/.....11DB..
PFRNN 0 TAW4NN/.....31BD.. E SNO3NN/.....11DM.. H SNW2NN/.....01DM.. – SNP2NN/.....03CA..
PFRRN 0 TAW4NN/.....31BD.. E SNO3NN/.....11DM.. G SNO3NN/.....11DM.. HU SNP2NN/.....03CA..
PFRRR 0 TAW4NN/.....31BD.. E SNO3NN/.....11DM.. G SNO3NN/.....11DM.. G SNQ3NN/.....11DB..

To assembly tandem pumps , consider first and rear stage; for triple pumps consider first, middle and rear stage; for
quadruple pumps consider all stages. Above table shows the 1:8 Taper sfhaft in combination with 01 flange standard
design only, corresponding to 1:8 taper shaft of single pump.For different configurations of shaft and front flange see
the pages regarding single pumps.

520L0557 • Rev DB • Jul 2009 65

 General Gear Pumps and Gear Motors
Technical Information
Multi-Stage Pumps

Multi-stage pumps with B D F Coupling kit width – K mm [in]

European standard front SNP1NN + SNP1NN 0
flange (01) SNP2NN + SNP1NN 0
SNP2NN + SNP2NN 0
SNP3NN + SNP1NN 0
SNP3NN + SNP2NN 25 [0.984]
SNP3NN + SNP3NN 0
TAP4NN + SNP1NN 23.5 [0.925]
K K TAP4NN + SNP2NN 25 [0.984]
TAP4NN + SNP3NN 0
A C E
TAP4NN + TAP4NN 0

All groups – dimensions (mm [in])

Product type, size A B C D E F
1,2 75.75 [2.982] 37.75 [1.486] 76.00 [2.992] 38.00 [1.496] 79.75 [3.140] 38.00 [1.496]
1,7 77.25 [3.041] 38.50 [1.515] 77.50 [3.051] 38.75 [1.525] 81.25 [3.199] 38.75 [1.525]
2,2 79.25 [3.120] 39.50 [1.555] 79.50 [3.130] 39.75 [1.565] 83.25 [3.278] 39.75 [1.565]
2,6 81.25 [3.199] 40.50 [1.594] 81.50 [3.208] 40.75 [1.604] 85.25 [3.356] 40.75 [1.604]
3,2 83.25 [3.278] 41.50 [1.634] 83.50 [3.287] 41.75 [1.644] 87.25 [3.435] 41.75 [1.644]
Group 1

SNP1NN
3,8 85.25 [3.356] 42.50 [1.673] 85.50 [3.366] 42.75 [1.683] 89.25 [3.514] 42.75 [1.683]
SKP1NN
4,3 87.25 [3.435] 43.50 [1.712] 87.50 [3.445] 43.75 [1.722] 91.25 [3.592] 43.75 [1.722]
6,0 93.75 [3.691] 46.75 [1.840] 94.00 [3.701] 47.00 [1.850] 97.75 [3.848] 47.00 [1.850]
7,8 100.25 [3.947] 50.0 [1.968] 100.5 [3.956] 50.25 [1.978] 104.25 [4.104] 50.25 [1.978]
010 109.25 [4.301] 54.50 [2.145] 109.5 [4.311] 54.75 [2.155] 113.25 [4.458] 54.75 [2.155]
012 117.25 [4.616] 58.50 [2.303] 117.5 [4.626] 58.75 [2.313] 121.25 [4.773] 58.75 [2.313]
4,0 87.50 [3.445] 43.3 [1.705] 87.50 [3.445] 43.3 [1.705] 93.0 [3.661] 43.3 [1.705]
6,0 91.0 [3.582] 45.0 [1.771] 91.00 [3.582] 45.0 [1.771] 96.5 [3.799] 45.0 [1.771]
8,0 95.0 [3.740] 45.0 [1.771] 95.00 [3.740] 45.0 [1.771] 100.5 [3.956] 45.0 [1.771]
011 99.0 [3.897] 49.0 [1.929] 99.00 [3.897] 49.0 [1.929] 104.5 [4.114] 49.0 [1.929]
Group 2

SNP2NN
014 105.0 [4.134] 52.0 [2.047] 105.0 [4.134] 52.0 [2.047] 110.5 [4.350] 52.0 [2.047]
SKP2NN
017 109.0 [4.291] 52.0 [2.047] 109.0 [4.291] 52.0 [2.047] 114.5 [4.508] 52.0 [2.047]
019 113.0 [4.449] 56.0 [2.205] 113.0 [4.449] 56.0 [2.205] 118.5 [4.665] 56.0 [2.205]
022 119.0 [4.685] 59.0 [2.323] 119.0 [4.685] 59.0 [2.323] 124.5 [4.902] 59.0 [2.323]
025 123.0 [4.843] 59.0 [2.323] 123.0 [4.843] 59.0 [2.323] 128.5 [5.059] 59.0 [2.323]
022 126.0 [4.960] 63.0 [2.480] 126.0 [4.960] 63.0 [2.480] 132.5 [5.216] 63.0 [2.480]
026 129.0 [5.078] 64.5 [2.539] 129.0 [5.078] 64.5 [2.539] 135.5 [5.334] 64.5 [2.539]
033 134.0 [5.275] 67.0 [2.637] 134.0 [5.275] 67.0 [2.637] 140.5 [5.531] 67.0 [2.637]
038 137.5 [5.413] 68.8 [2.708] 137.5 [5.413] 68.8 [2.708] 144.0 [5.669] 68.8 [2.708]
Group 3

044 142.0 [5.590] 71.0 [2.795] 142.0 [5.590] 71.0 [2.795] 148.5 [5.846] 71.0 [2.795]
SNP3NN
048 145.0 [5.708] 72.5 [2.854] 145.0 [5.708] 72.5 [2.854] 151.5 [5.964] 72.5 [2.854]
055 150.0 [5.905] 75.0 [2.952] 150.0 [5.905] 75.0 [2.952] 156.5 [6.161] 75.0 [2.952]
063 156.0 [6.141] 78.0 [3.071] 156.0 [6.141] 78.0 [3.071] 162.5 [6.397] 78.0 [3.071]
075 164.0 [6.456] 82.0 [3.228] 164.0 [6.456] 82.0 [3.228] 170.5 [6.712] 82.0 [3.228]
090 174.0 [6.850] 87.0 [3.425] 174.0 [6.850] 87.0 [3.425] 180.5 [7.106] 87.0 [3.425]
060 176.0 [6.929] 88.0 [3.464] 176.0 [6.929] 88.0 [3.464] 174.5 [6.870] 88.0 [3.464]
085 186.0 [7.323] 93.0 [3.661] 186.0 [7.323] 93.0 [3.661] 184.5 [7.264] 93.0 [3.661]
106 194.0 [7.637] 97.0 [3.819] 194.0 [7.637] 97.0 [3.819] 192.5 [7.578] 97.0 [3.819]
Group 4

TAP4NN 130 203.0 [7.992] 101.5 [3.996] 203.0 [7.992] 101.5 [3.996] 201.5 [7.933] 101.5 [3.996]
148 210.0 [8.267] 105.0 [4.134] 210.0 [8.267] 105.0 [4.134] 208.5 [8.208] 105.0 [4.134]
180 222.0 [8.740] 111.0 [4.370] 222.0 [8.740] 111.0 [4.370] 220.5 [8.681] 111.0 [4.370]
200 230.0 [9.055] 115.0 [4.527] 230.0 [9.055] 115.0 [4.527] 228.5 [8.996] 115.0 [4.527]

66 520L0557 • Rev DB • Jul 2009

 General Gear Pumps and Gear Motors
Technical Information
Multi-Stage Pumps

Multi-stage pumps with Examples of overall lenght calculation:

European standard front
flange (01) 2-stage pump: SNP3NN/044 + SNP1NN/3,2
(continued)
A = 142 mm
K = 0
E = 87.25 mm

Ltot = 142 + 0 + 87.25 = 229.25 mm

4-stage pump: SNP3NN/055 + SNP2NN/017 + SNP2NN/8,0 + SNP1NN/2,2

A = 150 mm
K = 25 mm (1° kit – 1st kit)
C = 109 mm (2nd stage)
K = 0 mm (2° kit – 2nd kit)
C = 95 mm ( 3rd stage)
K = 0 mm (3° kit – 3rd kit)
E = 83.25 mm ( 4th stage)

Ltot = 150 + 25 + 109 + 0 + 95 + 0 + 83.25 = 413.25 mm

520L0557 • Rev DB • Jul 2009 67

Our Products Sauer-Danfoss Mobile Power and Control Systems
– Market Leaders Worldwide
Open circuit axial piston pumps
Sauer-Danfoss is a comprehensive supplier providing complete
Gear pumps and motors ­systems to the global mobile market.
Fan drive systems
Sauer-Danfoss serves markets such as agriculture, construction, road
Closed circuit axial piston pumps building, material handling, municipal, forestry, turf care, and many
and motors others.
Bent axis motors
We offer our customers optimum solutions for their needs and
Hydrostatic transmissions develop new products and systems in close cooperation and
partner­ship with them.
Transit mixer drives
Hydrostatic transaxles Sauer-Danfoss specializes in integrating a full range of system
­components to provide vehicle designers with the most advanced
Electrohydraulics
total system design.
Integrated systems
Sauer-Danfoss provides comprehensive worldwide service for its
Microcontrollers and software
products through an extensive network of Global Service ­Partners
PLUS+1™ GUIDE strategically located in all parts of the world.
Displays
Joysticks and control handles
Sensors Local address:

Orbital motors
Inverters
Electrohydraulic power steering
Hydraulic power steering
Hydraulic integrated circuits (HIC)
Cartridge valves
Sauer-Danfoss (US) Company Sauer-Danfoss ApS
Directional spool valves
2800 East 13th Street DK-6430 Nordborg, Denmark
Proportional valves Ames, IA 50010, USA Phone: +45 7488 4444
Phone: +1 515 239 6000 Fax: +45 7488 4400
Fax: +1 515 239 6618
Sauer-Danfoss-Daikin LTD
Sauer-Danfoss GmbH & Co. OHG Sannomiya Grand Bldg. 8F
Postfach 2460, D-24531 Neumünster 2-2-21 Isogami-dori, Chuo-ku
Krokamp 35, D-24539 Neumünster, Germany Kobe, Hyogo 651-0086, Japan
Phone: +49 4321 871-0 Phone: +81 78 231 5001
Fax: +49 4321 871 122 Fax: +81 78 231 5004

520L0557 • Rev DB • Jul 2009 www.sauer-danfoss.com