0% found this document useful (0 votes)
48 views

DWG 2

Uploaded by

Muhammad NURMAN
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF or read online on Scribd
0% found this document useful (0 votes)
48 views

DWG 2

Uploaded by

Muhammad NURMAN
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF or read online on Scribd
You are on page 1/ 4
FM IF amplifier with demodulator TBA120S TBA 120 AS Symmetrical 8-stage amplifier with symmetrical coincidence demodulator for amplification, limiting and demodulation of frequency-modulated signals, especially suited for the sound IF units in TV sets and FM IF amplifiers in radio sets. The circuit is directly interchangeable with TBA 120/A (pin-compatible) © Outstanding limiting qualities # Very good frequency stability of converter characteristic © Wide range of operation (6 to 18 V) Very low external component requirement ® Voltage for AFT Type Ordering codes TBA120S 067000-A490 TBA120AS | 067000-A525 Package outlines TBA120S fh ia TBA 120AS. et | = = T aT 5 OoaanARA ‘i \ ya ouseaz5]) | ai Vite | oss TY ry hee ts | ie ae EET Lee wise imo! Liptte : ke 8 Be fnA ever ent Sa SS ‘i ¥ F oF bt. ——+ b+—-182.93 ——» Plastic plug-in package Plastic piug-in package 20 A 14 DIN 41866 14 pins, dual-in-line, 20 A 14 DIN4186 (similar) 14 pins, weight approx. 1.1g quad-in-line weight approx. 1.19 Dimensions in mm Dimensions in mm Absolute maximum ratings Supply voltage') Vee «| 18 v Ambient temperature in operation Tamb | -15to +70 °C Storage temperature T. —40 to +125 °c Total power dissipation Prot 400 mw (for max. 1 min) Prot 500 mW Z current Tha 15 mA (for max. 1 min) Ty 20 mA Voltage Vs 4 Vv ‘Current Ty 5 mA Current Ig 3 mA Shunt resistance Ryans <1 kQ Thermal resistance (system-air) Resa 120 K/Ww Range for operation Veo | 6to18 |v Frequency range f | Oto12 | MHz 1) The circuit must not plugged in or out when supply voltage is switched on. TBA120S TBA120 AS Electrical characteristics (V.. = 12 V, Tmo = 25°C) i [typ | max | Total current consumption (Rs = 0) Ice rages ae mA Total current consumption (A; = 0) me 15.2 | 20 mA IF voltage gain (/,¢ = 5.5 MHz) G | 68 dB IF output voltage at limiting Vase 170 250 mV (each output) | AF output voltage | 7 1.0 v (fyp = 5.5 MHz, 47 = 250 kHz, V, | fmoa= 1 KHz, Og & 45) | Harmonic distortion k 13 25 | % (fie = 5.5 MHz, Sf = £25 kHz, | V, = 10 MV, finog = 1 KHz, Qp = 45) Input voltage for -3 dB limiting Visi | 30 60 Ww (fir = 5.5 MHz, Af = £50 kHz, | frroe = 1 KHz, Op = 45) | Input impedance | 4 fip=5.5MHz Z, 40/4.5 | | kO/pF fye= 10.7 MHz Z, 20/4 | kQ/pF Output resistance (pin 8) 19 26 33 kQ Range of volume control | 70 | 7 dB DC level of output signal | 62 74 185 |v AM suppression 45 | 55 | a8 500 1V, fir = 5.5 MHz, | i Af = 250 kH2, foe = 1 KHz, m = 30%) AM suppression | 60 6 | | dB (Vj = 10 mV, typ = 6.5 MHz, | f= £50 KHZ, fog = 1 kHz, m = 30%) | | Potentiometer resistance (-1dBdown) Rs j 37 47 \ ko. Voltage (~1 dB down) Vs | 24 lv Potentiometer resistance (-70dB down) Rg | 1.0 14 | ko. Voltage (-70 dB down) Vs | 1.3 iv Signal-to-noise distance asm | 85 | 8 (V,= 10 mV, Af = +50 kHz) 1 | Characteristics of the additive circuit max Z-voltage (12 = 5 mA) Tole AV Z-resistance 55 a Breakdown voltage v Breakdown voltage (I; = 500 uA) v Current gain (Vee = 5 V, I, = 1 mA) TBA1 TBA1 NN oo Po Ss Test circuit a a. fl Koy lune cra] i 22nt =e nape fea | 18 ames on iF ion Pins 3 and 4 are connected to collector and base of a transistor, respectively, which may be used as an AF preamplifier (I, <5 mA) or as a bass/treble switch (dc on- or off-switching of 2 RC-circuit) Atpin 12 aZ diode (12 V) is accessible which can be used to stabilize the supply voltage of this integrated circuit or the voltage of other circuit elements in the set ([z< 15 mA). The integrated circuit TBA 120 S is supplied in different groups. Parameter is the volume. A decrease of 30 dB requires a resistor between pin 5 and ground with a resistance value depend- ing on the group number as shown below. The group number is imprinted on the plastic package, Group pu jm [wv Lv | RS Treto22 | 2iw25 | 2429 | 28033 | ka TBA120S TBA120 AS TBA 1205 with ceramic filter (Murata) For a good far-away-selectivity the ceramic filter should be combined with a LC circuit 6v — | Sound IF | Sound IFinTV sets) FM-IF in radio | FM-IF in radio | in TV sets | of American Std. | mono sets |_ stereo sets cq 1 4.5nF | 2.2nF 470 pF | 330 pF Cz 22 nF 22 nF 22 nF 470 pF Ly 8 turns | 8 turns | 8 turns 12 turns R, | @ | ~ 4k. Ra 680 2 1kQ | 3309 3302 Filter SFE5.5 MA | SFE 4.5 MA SFE 10.7 MA SFE 10.7 MA (Murata)

You might also like