Scribd
Upload
137 views

SC27G755D2: Power Rating

This document provides specifications for an SC27G755D2 engine. It lists the prime power as 505 kW at 1500 rpm and standby power as 555 kW at 1500 rpm. It includes details on the engine type, displacement, cooling and lubrication systems, mechanical details, dimensions, performance data and electrical system specifications. Fuel consumption is also provided at various percentages of power rating.

Uploaded by

Duc Thao Vu
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
137 views

SC27G755D2: Power Rating

This document provides specifications for an SC27G755D2 engine. It lists the prime power as 505 kW at 1500 rpm and standby power as 555 kW at 1500 rpm. It includes details on the engine type, displacement, cooling and lubrication systems, mechanical details, dimensions, performance data and electrical system specifications. Fuel consumption is also provided at various percentages of power rating.

Uploaded by

Duc Thao Vu
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

SC27G755D2

◎ POWER RATING

Engine Speed Type of Engine Power


rpm Operation kW Ps
Prime Power 505 687
1500
Standby Power 555 755
-. The engine performance is as per GB/T2820.
-. Ratings are based on GB/T1147.1.
---Prime power is available for an unlimited number of hours per year in a variable load application. The permissible average power
output over 24 hours of operation shall not exceed 80% of the prime power rating.
---Standby power is available in the event of a utility power outage or under test conditions for up to 200 hours of operation per year.
The permissible average power output over 24 hours of operation shall not exceed 80% of the standby power rating.
◎ SPECIFICATIONS ◎ FUEL CONSUMPTION

ㅇ Engine Model ㅇ Power


SC27G755D2 lit/hr

ㅇ Engine Type
V-type,4 strokes, water-cooled 25% 37.8
Turbo charged 50% 66.3
air-to-air intercooled 75% 95.3

ㅇ Combustion type
Direct injection 100% 126.0

ㅇ Cylinder Type
Wet liner 110% 139.0

ㅇ Number of cylinders
12

ㅇ Bore × stroke
135(5.32) × 155(6.1) mm(in.)

ㅇ Displacement
26.6(1623) lit.(in3)

ㅇ Compression ratio
16 : 1

ㅇ Firing order
1-12-5-8-3-10-6-7-2-11-4-9 ◎ FUEL SYSTEM

ㅇ Injection timing ㅇ Injection pump


11.5°BTDC Yijie in-line “P” type

ㅇ Dry weight ㅇ Governor


Approx. 2080kg (4585 lb) Electric type

ㅇ Dimension ㅇ Feed pump


1930×1686×1872mm Mechanical type

ㅇ Injection nozzle
(L×W×H) (76×66.4×75.8 in.) Multi hole type

ㅇ Rotation ㅇ Opening pressure


Counter clockwise viewed from 240kg/cm2 (3414 psi)

ㅇ Fuel filter
Flywheel Full flow, cartridge type
ㅇ Fly wheel housing ㅇ Used fuel
SAE NO.0 Diesel fuel oil

ㅇ Fly wheel
SAE NO.18

◎ MECHANISM ◎ LUBRICATION SYSTEM

ㅇ Type ㅇ Lub. Method


Over head valve Fully forced pressure feed type

ㅇ Number of valve ㅇ Oil pump


Intake 1, exhaust 1 per cylinder Gear type driven by crankshaft

ㅇ Valve lashes at cold ㅇ Oil filter


Intake 0.325mm (0.0128 in.) Full flow, cartridge type

ㅇ Oil pan capacity


Exhaust 0.375mm (0.0148 in.) High level 65 liters ( 17.16 gal.)
Low level 55 liters ( 14.52 gal.)

◎ VALVE TIMING ㅇ Angularity limit


Front down 25 deg.
Opening Close Front up 35 deg.

ㅇ Intake valve
20 deg. BTDC 48 deg. ABDC Side to side 35 deg.

ㅇ Exhaust valve ㅇ Lub. Oil


48 deg. BBDC 20 deg. ATDC Refer to Operation Manual

◎ COOLING SYSTEM
◎ ENGINEERING DATA

ㅇ Cooling method ㅇ Water flow


Fresh water forced circulation 740 liters/min @1,500 rpm

ㅇ Water capacity ㅇ Heat rejection to coolant


48 liters ( 12.7 gal.) 68 kcal/sec @1,500 rpm

ㅇ Heat rejection to CAC


(engine only) 32 kcal/sec @1,500 rpm

ㅇ Pressure system ㅇ Air flow


Max. 0.5 kg/cm2 ( 7.11 psi) 36 m3/min @1,500 rpm

ㅇ Water pump ㅇ Exhaust gas flow


Centrifugal type driven by belt 91.8 m3/min @1,500 rpm

ㅇ Water pump Capacity ㅇ Exhaust gas temp.


740 liters ( 195.36 gal.)/min 600 °C @1,500 rpm

ㅇ Max. permissible
at 1,500 rpm (engine)

ㅇ Thermostat
Wax–pellet type restrictions
Opening temp. 77°C Intake system 3 kPa initial
Full open temp. 90°C 6 kPa final

ㅇ Cooling fan
Blower type,iron Exhaust system 6 kPa max.

ㅇ Max. permissible altitude


1220 mm diameter, 6 blades 2,000 m

ㅇ Cooling air flow ㅇ Fan power


15.92 m³/s 25 kW
◎ ELECTRICAL SYSTEM ◆ CONVERSION TABLE

ㅇ Charging generator
28V×55A in. = mm × 0.0394 lb/ft = N.m × 0.737

ㅇ Voltage regulator
Built-in type IC regulator PS = kW × 1.3596 U.S. gal = lit. × 0.264

ㅇ Starting motor
24V×11kW psi = kg/cm2 × 14.2233 kW = 0.2388 kcal/s

ㅇ Battery Voltage
24V in3 = lit. × 61.02 lb/PS.h = g/kW.h × 0.00162

ㅇ Battery Capacity
200 AH hp = PS × 0.98635 cfm = m3/min × 35.336

lb = kg × 2.20462

You might also like