Scribd
Upload
154 views

27.2.10 Lab - Extract An Executable From A Pcap

The document describes extracting an executable file from a packet capture file. It involves using Wireshark to open the PCAP file, analyze network traffic, and export the HTTP object containing the executable. Following steps allow retrieving the file from the PCAP and confirming it is a Windows executable.

Uploaded by

Camilla Alves
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
154 views

27.2.10 Lab - Extract An Executable From A Pcap

The document describes extracting an executable file from a packet capture file. It involves using Wireshark to open the PCAP file, analyze network traffic, and export the HTTP object containing the executable. Following steps allow retrieving the file from the PCAP and confirming it is a Windows executable.

Uploaded by

Camilla Alves
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 6

Lab - Extract an Executable from a PCAP

Objectives
Part 1: Analyze Pre-Captured Logs and Traffic Captures
Part 2: Extract Downloaded Files from PCAP

Background / Scenario
Looking at logs is very important, but it is also important to understand how network transactions happen at
the packet level.
In this lab, you will analyze the traffic in a previously captured pcap file and extract an executable from the file.

Required Resources
• CyberOps Workstation virtual machine

Instructions

Part 1: Analyze Pre-Captured Logs and Traffic Captures


In Part 2, you will work with the nimda.download.pcap file. Captured in a previous lab,
nimda.download.pcap contains the packets related to the download of the Nimda malware. Your version of
the file, if you created it in the previous lab and did not reimport your CyberOps Workstation VM, is stored in
the /home/analyst directory. However, a copy of that file is also stored in the CyberOps Workstation VM,
under the /home/analyst/lab.support.files/pcaps directory so that you can complete this lab. For
consistency of output, the lab will use the stored version in the pcaps directory.
While tcpdump can be used to analyze captured files, Wireshark’s graphical interface makes the task much
easier. It is also important to note that tcpdump and Wireshark share the same file format for packet
captures; therefore, PCAP files created by one tool can be opened by the other.
a. Change directory to the lab.support.files/pcaps folder, and get a listing of files using the ls –l command.
[analyst@secOps ~]$ cd lab.support.files/pcaps
[analyst@secOps pcaps]$ ls -l
total 7460
-rw-r--r-- 1 analyst analyst 3510551 Aug 7 15:25 lab_prep.pcap
-rw-r--r-- 1 analyst analyst 371462 Jun 22 10:47 nimda.download.pcap
-rw-r--r-- 1 analyst analyst 3750153 May 25 11:10 wannacry_download_pcap.pcap
[analyst@secOps pcaps]$
b. Issue the command below to open the nimda.download.pcap file in Wireshark.
[analyst@secOps pcaps]$ wireshark nimda.download.pcap &
c. The nimda.download.pcap file contains the packet capture related to the malware download performed
in a previous lab. The pcap contains all the packets sent and received while tcpdump was running.

© 2017 - 2020 Cisco and/or its affiliates. All rights reserved. Cisco Public Page 1 of 6 www.netacad.com
Lab - Extract an Executable from a PCAP

Select the fourth packet in the capture and expand the Hypertext Transfer Protocol to display as shown
below.

d. Packets one through three are the TCP handshake. The fourth packet shows the request for the malware
file. Confirming what was already known, the request was done over HTTP, sent as a GET request.

© 2017 - 2020 Cisco and/or its affiliates. All rights reserved. Cisco Public Page 2 of 6 www.netacad.com
Lab - Extract an Executable from a PCAP

e. Because HTTP runs over TCP, it is possible to use Wireshark’s Follow TCP Stream feature to rebuild
the TCP transaction. Select the first TCP packet in the capture, a SYN packet. Right-click it and choose
Follow > TCP Stream.

© 2017 - 2020 Cisco and/or its affiliates. All rights reserved. Cisco Public Page 3 of 6 www.netacad.com
Lab - Extract an Executable from a PCAP

f. Wireshark displays another window containing the details for the entire selected TCP flow.

Questions:

What are all those symbols shown in the Follow TCP Stream window? Are they connection noise? Data?
Explain.
Type your answers here.

There are a few readable words spread among the symbols. Why are they there?
Type your answers here.

Challenge Question: Despite the W32.Nimda.Amm.exe name, this executable is not the famous worm.
For security reasons, this is another executable file that was renamed as W32.Nimda.Amm.exe. Using
the word fragments displayed by Wireshark’s Follow TCP Stream window, can you tell what executable
this really is?
Type your answers here.

g. Click Close in the Follow TCP Stream window to return to the Wireshark nimda.download.pcap file.

Part 2: Extract Downloaded Files from PCAP


Because capture files contain all packets related to traffic, a PCAP of a download can be used to retrieve a
previously downloaded file. Follow the steps below to use Wireshark to retrieve the Nimda malware.

© 2017 - 2020 Cisco and/or its affiliates. All rights reserved. Cisco Public Page 4 of 6 www.netacad.com
Lab - Extract an Executable from a PCAP

a. In that fourth packet in the nimda.download.pcap file, notice that the HTTP GET request was generated
from 209.165.200.235 to 209.165.202.133. The Info column also shows this is in fact the GET request for
the file.
b. With the GET request packet selected, navigate to File > Export Objects > HTTP, from Wireshark’s
menu.

c. Wireshark will display all HTTP objects present in the TCP flow that contains the GET request. In this
case, only the W32.Nimda.Amm.exe file is present in the capture. It will take a few seconds before the
file is displayed.

Question:

Why is W32.Nimda.Amm.exe the only file in the capture?


Type your answers here.

© 2017 - 2020 Cisco and/or its affiliates. All rights reserved. Cisco Public Page 5 of 6 www.netacad.com
Lab - Extract an Executable from a PCAP

d. In the HTTP object list window, select the W32.Nimda.Amm.exe file and click Save As at the bottom of
the screen.
e. Click the left arrow until you see the Home button. Click Home and then click the analyst folder (not the
analyst tab). Save the file there.
f. Return to your terminal window and ensure the file was saved. Change directory to the /home/analyst
folder and list the files in the folder using the ls -l command.
[analyst@secOps pcaps]$ cd /home/analyst
[analyst@secOps ~]$ ls –l
total 364
drwxr-xr-x 2 analyst analyst 4096 Sep 26 2014 Desktop
drwx------ 3 analyst analyst 4096 May 25 11:16 Downloads
drwxr-xr-x 2 analyst analyst 4096 May 22 08:39 extra
drwxr-xr-x 8 analyst analyst 4096 Jun 22 11:38 lab.support.files
drwxr-xr-x 2 analyst analyst 4096 Mar 3 15:56 second_drive
-rw-r--r-- 1 analyst analyst 345088 Jun 22 15:12 W32.Nimda.Amm.exe
[analyst@secOps ~]$
Question:

Was the file saved?


Type your answers here.

g. The file command gives information on the file type. Use the file command to learn a little more about the
malware, as show below:
[analyst@secOps ~]$ file W32.Nimda.Amm.exe
W32.Nimda.Amm.exe: PE32+ executable (console) x86-64, for MS Windows
[analyst@secOps ~]$

As seen above, W32.Nimda.Amm.exe is indeed a Windows executable file.


Question:

In the malware analysis process, what would be a probable next step for a security analyst?
Type your answers here.

End of document

© 2017 - 2020 Cisco and/or its affiliates. All rights reserved. Cisco Public Page 6 of 6 www.netacad.com

You might also like