ISOPRO-LPRTD-8 PRECISION ISOLATING INTERFACE

RAIL MOUNTING 8 CHANNEL ISOLATION MODULE FOR Pt-100 RTD INPUTS

SDIPL/8CHRTD / REV 4 / 08-2016

MODULE DEPTH 90 MM. MODULE WIDTH 183 MM. HEIGHT ABOVE RAIL 55 MM.
INPUT RANGE IS FACTORY SET.

DESCRIPTION: TECHNICAL DATA:

The LPRTD-8 is a rail-mounted isolator which accepts eight Pt-100 BOARD TYPE:8 channel Linearised RTD Field
RTD inputs, and provides 8 corresponding 4-20 mA/voltage outputs,
Interface Board with input to output and input to input
to interface to DCS, PLC etc inputs.
isolation.
The unit is powered by the panel 24V supply. Inputs are isolated RTD LEAD WIRE COMPENSATION:built in.
from outputs and from each other to 1.5 kV.The current or voltage
RTD NON-LINEARITY CORRECTION:built in.
outputs are referred to the 24V common.
ISOLATION:1.5KV AC RMS isolation between Input
Input ranges are factory set whereas the output is selectable between and Output AND between RTD inputs.
current or voltage by jumper links.
OUTPUT OPTIONS:4-20mA current output or 0-5V,
The unit allows low-error transfer of signals across unequal plant jumper selectable.Current limit 30mA,voltage limit 6V.
ground systems,eliminates multiple grounding issues, prevents SUPPLY:24VDC +/- 10%,200mA ,with LED indication
transfer of hazardous or interfering voltage & currents into sensitive
and costly i/o circuitry & provides a safe and accurate way to transfer
and reverse polarity protection.
signals to and from your system. OUTPUT DRIVE CAPABILITY:250 ohms in current
mode. In voltage mode we can offer buffered output with
Module dimensions are a compact 183 mm wide by 90 mm deep.
minimum load resistance of 10kohm.
UNIQUE FEATURES INCLUDE: ACCURACY:+/- 0.1% of span, including linearty error.
Temp. Coeff. Of output < 0.01% per deg. C.
COMPACT MODULE WITH 1.5kV GALVANIC ISOLATION,
REPEATIBILITY:better than 0.02% of span.
WITH 8 CHANNELS CONVENIENTLY IN ONE PACKAGE.
OPEN SENSOR INDICATION:LED for each channel.
ISOLATION ACCURACY (0.1%). INPUT RANGE :any,fixed,user specified.Adjustable
+/- 10% by span/zero multi-turn potentiometers.
LOW COUPLING CAPACITANCE OF15pF. RESPONSE TIME:better than 200msec at full load.
INPUT AND OUTPUT CONNECTIONS: Screw type
OUTPUT CAN BE 4-20mA OR 0-5 V,user selectable.
PCB Terminal Block, PHOENIX MECANO MKDS.
MOUNTING: DIN Rail (35 mm width).
VERY LOW SELF-GENERATED SWITCHING NOISE.
DIMENSIONS:180 mm width along dinrail,90 mm
HIGH ACCURACY OVER LOAD, TEMPERATURE VARIATIONS. depth.Height above rail 55 mm max.

Due to constant improvements,specifications subject to change without notice

 90mm

+ +24V
24V SYSTEM
3-WIRE d.c SUPPLY
- 0V
CH.1
RTD
L
C1

C2 CH.1

4-20mA OR VOLTAGE
OUTPUT,TO PLC,
CH.2 INSTRUMENT,DCS
+ ETC.
FIELD SIDE
SPAN/ZERO
ADJUSTMENT -
CH.2
NOTE THAT FOR OUTPUTS,
THE 0V OF THE 24V SUPPLY
IS THE LOW END REFERENCE.
CH.3 THE 0V OF SUPPLY IS
CH.3 INTERNALLY CONNECTED
TO MINUS OUTPUTS OF ALL
RTD OPEN LED CHANNELS.

183mm
FIELD CIRCUIT ON
INDICATION CURRENT OR VOLTAGE
OUTPUT SELECT

FIELD SIDE CIRCUITS ARE SPAN/ZERO POTS FOR

ISOLATED FROM THE 24V VOLTAGE OUTPUT.
SIDE AND FROM EACH OTHER.

ISOLATION MODULE

CH.8
CH.8

NOTES:

1)INPUT OF ANY CHANNEL IS ISOLATED FROM ITS OUTPUT. ALL INPUTS ARE IN TURN ISOLATED (FULLY FLOATING) FROM EACH
OTHER, SO USER CAN CONNECT VARIOUS RTD HAVING DIFFERING A.C GROUND REFERENCES, WITHOUT FEAR OF
GROUND-LOOP CURRENTS OR SPURIOUS SIGNAL INJECTION

2)ALL CHANNEL OUTPUTS SHARE A COMMON LOW REFERENCE, THIS BEING THE 0V OF THE 24V SUPPLY.

3)WIDTH AND DEPTH ON DIN-RAIL ARE SHOWN IN mm.(TOP VIEW).THE HEIGHT OF MODULE IS 55 mm.MOUNTING IS UNIVERSAL DIN-RAIL.