Scribd
Upload
158 views

3d Printing Internship

The document advertises a 2-week internship on 3D printing in manufacturing at the Design & Prototyping Centre of the Engineering Staff College of India. The internship provides an overview of additive manufacturing techniques and applications, basics of design for additive manufacturing, materials used in 3D printing, and hands-on experience using FDM and SLA printers. Interns will also complete a project. The internship costs Rs. 6000 and runs from May 10 - June 6, 2021 or June 10 - July 8, 2021 with a maximum of 5 participants per batch. Upon completion, interns will receive an assessment and certificate from ESCI and their technology partner.

Uploaded by

Dharshan S
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
158 views

3d Printing Internship

The document advertises a 2-week internship on 3D printing in manufacturing at the Design & Prototyping Centre of the Engineering Staff College of India. The internship provides an overview of additive manufacturing techniques and applications, basics of design for additive manufacturing, materials used in 3D printing, and hands-on experience using FDM and SLA printers. Interns will also complete a project. The internship costs Rs. 6000 and runs from May 10 - June 6, 2021 or June 10 - July 8, 2021 with a maximum of 5 participants per batch. Upon completion, interns will receive an assessment and certificate from ESCI and their technology partner.

Uploaded by

Dharshan S
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Engineering Staff College of India

Autonomous Organ of The Institution of Engineers (India)


(An ISO 9001:2015 Certified, AICTE & CEA Recognized Institution)
Old Bombay Road, Gachibowli, Hyderabad, Telangana – 500 032, India

ULTIMAKER 3 EXTENDED Form 2 Sla 3D Printer

Internship & Training on


3D printing in Manufacturing

Design & Prototyping Centre


040 66304184 | [email protected] | +91 7330641010
Introduction:
The Design & Prototyping Cell, DPC at ESCI is a pioneering initiative which is set up to foster
design and development skills among students, young engineers and technologists. The Centre aims
to practice project based pedagogy and implement programs that emphasize experiential learning.
The objective of the Centre is to emphasize on activities that are central to product design &
development efforts of various industrial sectors and to encourage students, academicians, local
entrepreneurs, communities and working professionals to take their own ideas from the drawing
board to developing prototypes in view of starting a micro / small / medium business or inventing
products or completing a project.
The Centre works for in the areas such as Digital Manufacturing - Additive, Reverse
Engineering - 3D Scanning & 3D Printing, Industrial and Application, Drones, Mechatronics, Digital
Electronics, Product Design & Development, Design Analysis & Optimization, Rapid Prototyping,
Mechanization & Automation and other Emerging Technologies. The training programs are conducted
for Academicians, Working Professionals, Research Scholars, Aspiring Entrepreneurs and Students.
The programs include Workshops, Seminars, Guest Lectures, Interactive Sessions, Hands-on-skills
Training, Projects and Internships. We also undertake R&D Consultancy projects, Reverse Engineering
(Scanning) and 3D printing projects. The courses are so designed to enable the learners comprehend
the basics, analyze the subtleties and to apply the knowledge in real life. The learning process in
eternal and to learn something unlearning is equally important and hence every course starts with the
basics so as to help the learner to begin afresh and get the complete benefit of the course.
Industrial Training content:
 Overview of Additive Manufacturing
 AM vs Traditional Manufacturing
 Benefits & Limitations of AM
 Different types of AM Techniques
 Selection of right technique for specific applications
 Applications of AM in Automotive, Aerospace and Medical domain
 Basics of Design for Additive Manufacturing
 Materials in AM
 Slicing software
 Post processing techniques
 Basics of Metal 3D printing
Course Outcomes:
 Understand the concept of Additive Manufacturing (3D printing) with its applications
 Understand the functioning, maintenance and troubleshooting of FDM and SLA printer.
 Capable of design, optimize and analyze the component.
 Conceptual clarity about Metal Printing.
Internship Details:
Duration : 2 weeks training + 1 week hands on FDM and SLA + 1 week project
Venue : Engineering Staff College of India, ESCI
Fee : Rs. 6000/- (Inclusive of Tax)
Batch Size : 4 – 5 (limited to 5 batches)

http://esciupskill.org/online_cpdp_programs/division/program_details/167

Assessment & Certificate: ESCI and Technology Partner


Internship Dates - 10th May – 06th June 2021 10th June – 08th July 2021

Design Prototyping Centre, Engineering Staff College of India


Gachi Bowli, Hyderabad – 500 032 Phone: 7330641010/ 040 – 66304184 (Direct)
Fax: 040 – 66304198, Email: [email protected], Portal: www.esciupskill.org

You might also like