Scribd
Upload
225 views

Rig 166 Data Sheet

This document provides specifications for oil drilling rig RIG 166, including: - It has a 146' mast and can drill to a depth of 30,000 feet. - Its hoisting equipment includes a 750 ton block and 750 ton hook. - Mud pumping systems include 3 pumps powered by electric motors, with mud mixing and solids control equipment. - It has housing for diesel generators, drawworks, shale shakers, mud tanks, and other ancillary equipment needed for deep oil drilling.

Uploaded by

Estuardo Olan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
225 views

Rig 166 Data Sheet

This document provides specifications for oil drilling rig RIG 166, including: - It has a 146' mast and can drill to a depth of 30,000 feet. - Its hoisting equipment includes a 750 ton block and 750 ton hook. - Mud pumping systems include 3 pumps powered by electric motors, with mud mixing and solids control equipment. - It has housing for diesel generators, drawworks, shale shakers, mud tanks, and other ancillary equipment needed for deep oil drilling.

Uploaded by

Estuardo Olan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

RIG 166

WORKING DEPTH: 30,000'

PROFUNDIDAD DE TRABAJO

DRAWWORKS OIME E-3000


Powered by: 3 GE 752 DC electric motors 1,000 HP each
Auxiliary Brake: Baylor Elmagco 7838

SCR HOUSE Ross Hill 1600

POWER 3 - Caterpillar 399 diesel engines with 3 KATO 1050 KW electric generators

#1 PUMP Continental Emsco FB1600


Powered by: 2 GE 752 DC electric motors

#2 PUMP Continental Emsco FB1600


Powered by: 2 GE 752 DC electric motors

#3 PUMP Continental Emsco FB1300


Powered by: 2 GE 752 DC electric motors

MAST 146' Lee C. Moore 1,300,000# 14 lines Serial # T 3832

SUBSTRUCTURE 32' raised floor 1,000,000# casing capacity with 800,000 set back

TRAVELING Block: IDECO 750 ton


EQUIPMENT Hook: BJ 750 ton
Swivel: Continental Emsco LB 400

ROTARY TABLE Oilwell 37 1/2" Opening

BOP EQUIPMENT Ram Preventor: 13 5/8" 10,000# Double ram


0
Annular Preventor: 13 5/8"5,000# with 10,000# bottom flange

MUD SYSTEM Working Pits: Shale: 10' x 8' x 40' 570bbl


Sand: (2) 10' x 8' x 40' 570 bbl each
Suction: 10' x 8' x 40'; 1,600 bbl 570 bbl
electric pit stirrers
Premix Pit: 150 bbl built into suction tank
Mud Mixing Pump: 3 Mission Magnum 6" x 8" centrifugal

SOLIDS CONTROL Shale Shaker: 2 - Derrick Dual Flo-line cleaners


EQUIPMENT Desander: Demco 2-12" cones
Desilter: Totco 12-4" cones
Prime Movers: 5 X 6 X 11

AUXILIARY Water Tank: 2-500 bbl


EQUIPMENT Fuel Tank: 500 bbl
Pipe Spinner: Varco SSW 10
Kelly Spinner: International Tool Co.
Mud House: 8' x 10' x 40'
Trip Tank: 100 bbl w/ 2 X 3 pumps
RIG 166
WORKING DEPTH: 30,000'
PROFUNDIDAD DE TRABAJO

You might also like