®

dseGenset

dse8860
ENVIRONMENTAL TESTING STANDARDS

ELECTRO MAGNETIC COMPATIBILITY

BS EN 61000-6-2

AUTO TRANSFER SWITCH & MAINS EMC Generic Immunity Standard for the
Industrial Environment

COLOUR CONTROL MODULE BS EN 61000-6-4

EMC Generic Emission Standard for the
Industrial Environment
FEATURES ELECTRICAL SAFETY
BS EN 60950
Safety of Information Technology Equipment,
including Electrical Business Equipment

TEMPERATURE
BS EN 60068-2-1
The DSE8860 is an easy-to-use Comprehensive communications With all communication ports Ab/Ae Cold Test -30oC
single or multi-mains controller with are also available via RS232, capable of being active at the same BS EN 60068-2-2
Bb/Be Dry Heat +70oC
automatic transfer switch capability. RS485 & Ethernet for remote PC time, the DSE8000 Series is ideal
Designed to synchronise single or control and monitoring, and for a wide variety of demanding VIBRATION
load share applications. BS EN 60068-2-6
multiple DSE8810s with single or integration into building Ten sweeps in each of three major axes
multiple mains (utility) supplies, the management systems. 5Hz to 8Hz @ +/-7.5mm, 8Hz to 500Hz @ 2gn
DSE8860 will automatically control KEY LOAD SHARE FEATURES:
The comprehensive event log will HUMIDITY
the change over from mains (utility) • Peak lopping
record up to 250 events to facilitate BS EN 60068-2-30
to generator supply or run generators • Sequential set start Db Damp Heat Cyclic 20/55oC @ 95% RH 48
maintenance.
in synchronisation with the mains • Manual voltage/frequency Hours
BS EN 60068-2-78
(utility) to provide no-break, peak An extensive number of fixed and adjustment Cab Damp Heat Static 40oC @ 93% RH 48
lopping and peak shaving power flexible monitoring and protection • R.O.C.O.F. and vector shift Hours

solutions. features are included. Easy • Generator load demand SHOCK

alteration of the sequences, timers • Automatic hours run balancing BS EN 60068-2-27

The module can indicate and alarms can be made using the • Mains (Utility) de-coupling Three shocks in each of three major axes
15gn in 11mS
operational status and fault DSE PC Configuration Suite • Mains (Utility) de-coupling
conditions on the LCD screen Software. Selected configuration is test mode DEGREES OF PROTECTION
• Bus failure detection PROVIDED BY ENCLOSURES
(multiple languages available), by also available via the module’s front BS EN 60529
illuminated LED, audible sounder panel. • Volts and frequency matching. IP65 - Front of module when installed into the
control panel with the supplied sealing gasket.
and SMS messaging.

COMPREHENSIVE FEATURE LIST TO SUIT A WIDE

VARIETY OF LOAD SHARE APPLICATIONS
MODEM MODBUS PC
DSE2130
DSE2131
DSE2133
12 8
DSE2157 2
DSE2152
DSE2548 232 2 x 485

DSENET® RS232 AND USB USB CONFIGURABLE DC OUTPUTS ANALOGUE DC POWER

EXPANSION RS485 PORT HOST INPUTS SENDERS SUPPLY 8-35V
+
ETHERNET

DSE8860 MSC

7
8x60 ­8x10 ­8x80 ­8x10 ­8x60
OTHER

MAINS (UTILITY) SENSING N/C VOLT FREE LOAD N/O VOLT BUS
OUTPUTS CURRENT FREE OUTPUT SENSING
CURRENT VOLTS

1ph 1ph 1 1ph 1 1ph

2ph 2ph 2ph
3ph 3ph 3ph
N N

ISSUE 1
 ®

dseGenset

dse8860
SPECIFICATION

DC SUPPLY
CONTINUOUS VOLTAGE RATING
AUTO TRANSFER SWITCH & MAINS 8 V to 35 V Continuous

CRANKING DROPOUTS
Able to survive 0 V for 50 mS, providing
supply was at least 10 V before dropout
FEATURES and supply recovers to 5 V. This is achieved
without the need for internal batteries.
LEDs and backlight will not be maintained
during cranking.

MAXIMUM OPERATING CURRENT

600 mA at 12 V, 300 mA at 24 V

MAXIMUM STANDBY CURRENT

330 mA at 12 V, 160 mA at 24 V

MAINS (UTILITY) AND BUS

VOLTAGE RANGE
15 V to 333 V AC (L-N)

FREQUENCY RANGE
3.5 Hz to 75 Hz

OUTPUTS
OUTPUTS C & D
8 A at 250 V AC (Volt free)

AUXILIARY OUTPUTS E,F,G,H,I,J,K & L

2 A DC at supply voltage

DIMENSIONS
OVERALL
245 mm x 184 mm x 50 mm
9.6” x 7.2” x 2”

PANEL CUT-OUT
220 mm x 160 mm
8.7” x 6.3”

KEY FEATURES DSE8600 Series MAXIMUM PANEL THICKNESS

8 mm
• Colour LCD graphical display • Front panel editing with PIN KEY BENEFITS
0.3”
• Configurable digital inputs (12) protection • Dual processor for improved
• Configurable outputs (10) • Configurable timers and alarms response STORAGE TEMPERATURE RANGE
-40 oC to +85 oC
• Configurable flexible sender • Multiple date and time scheduler • RS232, RS485 & Ethernet can be
inputs (2) • Configurable event log (250) used at the same time
• Comprehensive electrical • Easy access diagnostic page • High number of inputs and
protection • kW overload protection outputs
• Comprehensive loadshare • Reverse power protection • Worldwide language support
capabilities • Power monitoring (kW h, kV Ar, • Data logging & trending
• Mains (utility) fail sensing kV A h, kV Ar h) • Harmonics display for clear
• Multiple mains (utility) • USB connectivity monitoring
monitoring, when using multiple • Backed up real time clock • Modules can be integrated into
DSE8860s • Fully configurable via DSE building management systems
• Peak lopping Configuration Suite PC software (BMS)
• Peak shaving • Advanced SMS messaging • Licence-free PC software
• RS232, RS485 & Ethernet (additional external modem • IP65 rating (with supplied
remote communications required) gasket) offers increased
• Modbus RTU/TCP support • Start & stop capability via SMS resistance to water ingress
• Configurable display languages messaging • PLC editor allows user
• Audible alarm • Additional display screens to configurable functions to meet
• Reduced file transfer time help with modem diagnostics specific application
• Fault condition notification to • DSENet® expansion compatible requirements
a designated PC • Integral PLC editor
• Compatible with DSE8700 &

RELATED MATERIALS
TITLE PART NO’S
DSE8860 Installation Instructions 053-139
DSE8860 Operator Manual 057-173
DSE8860 PC Configuration Suite Software Manual 057-174
DSE8810 Data Sheet 055-116

DEEP SEA ELECTRONICS PLC UK DEEP SEA ELECTRONICS INC USA

Highfield House, Hunmanby Industrial Estate, Hunmanby YO14 0PH 3230 Williams Avenue, Rockford, IL 61101-2668 USA
TELEPHONE +44 (0) 1723 890099 FACSIMILE +44 (0) 1723 893303 TELEPHONE +1 (815) 316 8706 FACSIMILE +1 (815) 316 8708
EMAIL [email protected] WEBSITE www.deepseaplc.com EMAIL [email protected] WEBSITE www.deepseausa.com

Deep Sea Electronics Plc maintains a policy of continuous development and reserves the right to change Registered in England & Wales No.01319649 055-139/7/12 (1)
the details shown on this data sheet without prior notice. The contents are intended for guidance only. VAT No.316923457