ZW series

WHEEL LOADERS
Model Code : ZW80-F
Operating Weight : 4 895-5 270 kg
Bucket Capacity : ISO Heaped : 0.7-1.0 m3
Rated Engine Output : 45.6 kW (61 HP)
 Agile and Compact
ZW80-F Wheel Loaders

Agility
and
Big Power
Agile footwork and high power. Those come
from the Hitachi new compact wheel loaders,
ZW80-F. The dynamic styling is impressive,
reflecting high mobility, power and productivity.

ZW80-F

Rated Output 45.6 kW

(61 HP)
Maximum Bucket
breakout Force 46.6 kN
Maximum Travel
Speeds, F/R 34 km/h
Note:
Photos and illustrations shown on this brochure may include optional equipment.
The machines shown are positioned for the sake of demonstration. When leaving the machine at job sites,
please take necessary safety measures: for instance, rest the front attachment on the ground.

2
3
Functional Beauty for Greater Work Performance

High Stability
The machine is well balanced by lowering the center of gravity, keeping balance between front and rear, and left and right.

Ample Dumping Clearance and Reach

Big Power, High Fuel Efficiency and Clean Technology

Dumping clearance

Ample Engine Output [New] eco Mode Switch [New] Dumping

About 10% Fuel Consumption reach
Reduction
In the eco mode,
fuel consumption
can be reduced
Dumping Dumping
by about 10% by
clearance reach
lowering engine
speed. This is ZW80-F 2 500 mm 880 mm
effective in light-
duty operations,
such as snow High Maneuverability in Confined Space
removal and gravel Overall Min. turning
The new high-powered clean engine is
collection. length radius*
mounted for productive, and powerful
ZW80-F 5 120 mm 4 475 mm
loader operations. *Loader clearance circle, bucket in carry position.

4
Easy-to-Read Monitor

The easy-to-read monitor allows the

operator to check operating conditions
of the machine at a glance. Meters
and indicators are grouped for easy
monitoring.

New Electronic-Controlled HST [NEW]

The HST pump and motor can be
electronically controlled independent of
oil temperature. So, smooth acceleration
and deceleration can be done by
depressing the accelerator pedal.
• Smooth inching operation with accelerator pedal
• Precision operations possible at extremely low
speeds
• Excellent driving performance with highly
responsive acceleration
• Smooth startup on slopes using HST brake
mechanism

Easy Access to Operator's Station [NEW]

Comfort-Designed Seat [NEW] Walkthrough Type Canopy/Cab

There are handrails and large steps

mounted on both the left and right of the
operator's station for easy access.

Ergonomic Control Lever

The short-stroke suspension seat is The walkthrough type canopy/cab allows

provided as standard equipment to for easy access from either side. The flat
absorb shocks and vibration during floor enables easy cleaning.
operation, reducing operator's fatigue in
long hours of operation. Electric Controlled Parking Brake
The electric controlled parking brake
Convenient Forward/Reverse Lever functions prevent dragging as well as
Shift lever provides finger-tip control of seizure. If the engine stalls, the parking
The control lever is ergonomically forward and reverse operations with your brake is applied automatically.
designed for easy, speedy control of the left hand while holding onto the steering
front attachment. wheel.

5
Boosted Operator Comfort and Safety

Panoramic Cab (Optional) Long-Stroke Suspension Seat (Optional) Assortment of Cab Options
The panoramic cab gives almost all- • Heater
round visibility with the wide front glass • Twin heaters
window and pillarless rear corners. • Air conditioner
• Sun visor (front)
Low-noise Level in cab • Sliding window (right door)
The cab is sound insulated with highly
sealing design, new low-noise engine,
and rubber-mounted operator frame
and hydraulics. The result is 5 dB(A)
reduction in noise level.

A long-stroke suspension seat, which

well absorbs shocks and vibration, is
optionally available.

6
ROPS/FOPS* Cab (Optional) Neutral Engine Start System Control Lever Lock
The control lever
and optional
auxiliary function
lever are lockable
for safety.

Lockable Filler Cap and Engine Cover

If the forward/reverse is not in neutral (N),
the engine cannot start, enhancing safe
operation.

Reducing Environmental Impact

ROPS/FOPS cab Resin parts are marked for identification,
The ROPS/FOPS cab is adopted to facilitating recycling after disposal. The filler cap and engine cover can be
protect the operator from roll-over
locked with the engine key for protection
accidents and falling objects.
against vandalism.
Also, the ROPS/FOPS canopy is
optionally available.
ROPS: Roll-Over Protective Structure: ISO3471
FOPS: Falling Object Protective Structure: ISO3449

7
Concentrated Servicing Points

Aluminum Radiator and Oil Cooler

Aluminum
radiator

Aluminum
oil cooler

The aluminum radiator and oil cooler are

located side by side for easy cleaning.

Remote Lubrication and Engine Oil Drain

Remote lubricating point Piping

(via grease nipple) Hose
Engine oil drain plug Rear oscillation
Remote lubrication and engine oil drain
eliminates the need for getting under the
rear oscillation.

Concentrated Electric Parts

Electric parts, such as relays, are
grouped at one point for simple
Wide-Open Engine Cover
maintenance.
Daily maintenance is simplified with the wide-open engine cover and low-profile
counterweight. The engine cover can be opened at a touch and held with a gas damper
Coolant Reservoir
for quick inspection, replacement and replenishment.
The coolant reservoir allows for direct
coolant level checking.
HN Bushings Brake Oil Reservoir
The brake oil reservoir allows direct Double-Element Air Cleaner
checking of brake oil. Its warning light The double-element air cleaner is
turns on for alerting. located strategically for the convenience
of inspection and replacement.
Battery
Battery electrolyte level can be checked Fuel Filter and Water Separator
at a glance through an opening of the A cartridge type fuel filter is used for
counterweight. easy replacement. The water separator
Grease
groove has a transparent cup for easy water
level checking.
The time-tested HN bushings are
utilized at joints of the front attachment,
extending lubricating intervals up to 250
hours.

Note: For an initial 50-hour lubricating interval, refer to

the Operator's Manual.

8
DIMENSIONS & SPECIFICATIONS
DIMENSIONS & SPECIFICATIONS

45°
I L
G F C
J
B
K N

40° H
H' E
M D
A
A'

ZW80-F
Bucket type Standard Arm Standard Arm with Quick-Coupler High Lift Arm
General purpose with bolt-on cutting edges
Bucket capacity ISO heaped m3 0.9 1.0 0.9 1.0 0.7 0.9
ISO struck m3 0.7 0.8 0.7 0.8 0.58 0.7
A Overall length mm 5 120 5 245 5 280 5 400 5 625 5 725
B Overall height, bucket on ground (with canopy) mm 2 790
Overall height, bucket on ground (with ROPS/FOPS cab) mm 2 850
C Width over tires mm 1 920
D Wheel base mm 2 200
E Ground clearance mm 340
F Tread mm 1 470
G Bucket width mm 1 990
H Turning radius (centerline of outside tire) mm 3 795
H'Loader clearance circle, bucket in carry position mm 4 475 4 505 4 540 4 570 4 700 4 740
I Overall operating height mm 4 065 4 165 4 315 4 410
J Height to hinge pin, fully raised mm 3 165 3 505
K Dump clearance 45 degree, full height mm 2 500 2 415 2 390 2 305 2 915 2 845
L Reach, 45 degree dump, full height mm 880 960 990 1 075 1 140 1 210
M Digging depth (horizontal digging angle) mm 65 335
N Max. roll back at carry position deg 53 49 52
Static tipping load* straight kgf 3 650 3 560 3 350 3 290 2 630 2 590
Full 40 degree turn kgf 3 110 3 030 2 840 2 780 2 220 2 180
Breakout force kN(kgf) 46.6 (4 750) 39.0 (3 975) 36.8 (3 755) 31.8 (3 245) 55.2 (5 625) 46.4 (4 735)
Operating weight (with canopy)* kg 4 895 4 940 5 030 5 050 4 995 5 025
Operating weight (with ROPS/FOPS canopy)* kg 4 960 5 005 5 095 5 115 5 060 5 090
Operating weight (with ROPS/FOPS cab)* kg 5 115 5 160 5 250 5 270 4 215 5 245
Notes: 1. All dimensions, weight and performance data based on ISO 6746-1:1987, ISO 7131:1997 and ISO 7546:1983
2. Static tipping load and operating weight marked with * include 17.5/65-20 10PR: ZW80-F tires (no ballast) with lubricants, coolant, full fuel tank and operator.
Machine stability and operating weight depend on counterweight, tire size and other attachments.

BUCKET SELECTION GUIDE

110% 100% 95%
%=Bucket Fill Factor

General purpose bucket with Bucket Material density kg/m3

bolt-on cutting edges Capacity m3 800 1 000 1 200 1 400 1 600 1 800
0.9
Standard arm
1.0

0.9
Standerd lift with quick-coupler
1.0

0.7
High lift arm
0.9

9
SPECIFICATIONS
ENGINE ZW80-F
Model KUBOTA V3307
Type 4-cycle water-cooled,direct injection
No. of cylinders 4
Maximum power SAE J1349, with Fan net 45.6 kW (61 HP) at 2 200 min-1(2 200 rpm)
ISO 9249, with Fan net 45.6 kW (61 HP) at 2 200 min-1(2 200 rpm)
Bore and stroke 94 mm x 120 mm
Piston displacement 3.331 L
Batteries 12V× 662 CCA, 159-min.rated reserve
Air cleaner Double stage dry type

POWER TRAIN ZW80-F

Transmission controls Hydrostatic (HST) transmission automatically controls power and 2-speed
Travel speed : Forward & Reverse 34 km/h with 17.5/65-20 10PR tires

AXLE AND FINAL DRIVE ZW80-F

Drive system Four-wheel drive system
Front & rear axle Semi-floating
Front Fixed to the front frame
Rear Center pivot
Oscillation angle total 22° (±11°)
Final drives Heavy-duty, planetary final drive

TIRES (tubeless, nylon body) ZW80-F

Standard 17.5/65-20 10PR (L2)

BRAKES ZW80-F
Service brakes Inboard mounted fully hydraulic wet disk
Parking brake Spring applied hydraulic released wet disk

STEERING SYSTEM ZW80-F

Type Articulated frame steering
Steering mechanism Full hydraulic power steering with orbitrol®
Steering angle Each direction 40°; total 80°
Cylinders Double-acting piston type
No. x Bore x Stroke 2 × 45 mm × 340 mm
Minimum turning radius at the centerline of outside tire 3 795 mm

HYDRAULIC SYSTEM ZW80-F

Arm and bucket are controlled by mechanical single control lever
Arm controls Four position valve; Raise, hold, lower, float
Bucket controls Two position valve; Roll back, dump
Gear type 72 L/min
Main pump (Load & steer)
2 200 min-1(rpm) at 20.6 MPa (210 kgf/cm2)
Relief pressure setting 20.6 MPa (210 kgf/cm2)
Hydraulic cylinders Type Two arm and one bucket, double acting type
No. x Bore Arm: 2 × 85 mm × 552 mm
x Stroke Bucket : 1 × 80 mm × 457 mm
Filters Full-flow 10 micron return filter before reservoir
Hydraulic cycle times Arm raise 5.0 s
Arm lower 3.5 s
Bucket dump 1.0 s

SERVICE RIFILL CAPACITIES ZW80-F

Fuel tank 82 L
Engine coolant 10 L
Engine oil 11 L
Front axle differential & wheel hubs 6L
Rear axle differential & wheel hubs 10 L
Hydraulic reservoir tank 50 L
Orbitrol® is a registered trademark of Char-Lynn.

10
STANDARD & OPTIONAL EQUIPMENT
Equipment

: Standard : Optional : Estimate : Not attachable or no setting

Components Items ZW80-F

Operator's Canopy
station ROPS/FOPS canopy
ROPS/FOPS cab, w/front & rear work lights, 2 each, 55 W
Seat, w/seat Standard short-stroke suspension seat
belt Long-stroke suspension seat (fabric)
Long-stroke suspension seat (imitation leather)
Tires and Traction tires
differential Solid tires
Foam filled tire
Galvanized rim
LSD (Limited slip differential)
Attachments Attachment piping with auxiliary function lever (3-spool valve, 2 levers)
High-lift arm *1
Quick coupler (mechanical)
Quick coupler (hydraulic) *2
Lumber fork (pallet fork)
Roll grab (bale grab) *2
Roll fork (bale fork)
Manure fork
Ride control
Galvanized bucket
Others Back buzzer
Standard battery
Large-capacity battery
Alternator (80A)
Double-element air cleaner
Dust screen (radiator)
Wide fin radiator
Under-guard
*1 If you want to install other attachment than pin-connected bucket, contact our HITACHI authorized dealer.
*2 Order a set of attachment piping (3-spool valve and 2 levers).

Cab and Canopy Equipment

: Standard : Optional : Not attachable or no setting
Canopy,
Components Items ROPS/FOPS cab
ROPS/FOPS canopy
Lights Head light
Backup light
Front work lights (twin)
Rear work lights (twin)
Rear work light (single)
Air- Air conditioner
conditioning Heater
Twin heaters
Foot heater
Others Sliding window (right door)
Sunvisor (front)

11
 WHEEL LOADER

These specifications are subject to change without notice.

Illustrations and photos show the standard models, and may or may not include optional equipment,
accessories, and all standard equipment with some differences in colour and features.
Before use, read and understand the Operator’s Manual for proper operation.

Hitachi Construction Machinery Co., Ltd.

www.hitachi-c-m.com KL-EN131 17.08 (KA/SHO,HT3)
Printed in the Japan